Tender For Construction Of Anganwadi At Jeganathapuram In Kundrathur Municipality; 1 Earth work excavation for foundation, etc., in all soil sand sub- soils and to full depth as maybe directed except in hard rock requiring blasting inclusive ofshoring, shuttering, bailing out water wherever necessaryrefilling the foundation with excavated earth other than sandy soil in layers of not more than 15 cmthick well rammed and depositing the surplus earth with in the compound in place shown by the departmental officers within an initial lead and lift and clearing and levelling the site etc.,complete 2 Supply delivery and filling of River Sand in layer of not more than 15 cm thick including watering with all layers and consolidation complying with standard specification including cost and conveyence of sand to Site and all labour charges and all other incidential charges etc,. complete as per Standard Specification 3 Cement Conceret 1:4:8 (One Cement four sand and eight aggregate) using 40mm hard broken granite stone jelly for foundation includingdewatering and wherever necessarylaying in layers of 15cm thick and consolidated and curing complying with standard specification and as directed by the departmental officers etc., complete.- 4 Supplying and errecting centering for plane surfaces such as RCC slab,beam etc.,including strutting upto 3m high using mild steel sheets of size 90cm X60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm for boarding laid over country wood (silver Oak) joists of size 10cm X 6.5cm spaced at 90cm centres and supported by casurina props of size 10 - 13cm dia spaced at 75cm centres including necessary cross bracings etc., complete complying with standard specifications. 5 With Strutting 6 Column 7 Plain surface 8 Reinforecement Cement concrete 1:11/2:3 ( one cement one and half part sand and three aggregate) using 20mm size hard broken granite stone jelly for plain concrete including cost of material machine for mixng motor, vibrating charges shoring, strutting and Dewatering wherever necessary laying in layers of 15cm thick consolidation and curing inclusife of all lead and lift etc., complete and as per directed by the departmentalofficers. 9 Supplying fabricating and placing in position of M.S or RTS rods including cutting, bending, placing and tying in position including cost of binding wire etc complete as per standard specification. 10 Brick work in Cement Mortar in 1:5 ( One cement and Five Sand ) using best quality of Country bricks of size 8¾x 4 ¼ x 2 ¾ including all cost of materials and labour charges includingCuring charges etc., complete as per Standard Specificationand as directed by department officials. 11 Upto basement 12 Above basement 13 Special Plasteringwith cement mortar 1:3(One cement three sand) 10mm thickincluding cost and conveyance of materials to site and including all labour charges etc complete. 14 Plastering walls with cement mortar 1:5 (One cement five sand) 12mm thick in all floors and all exposed surfaces including cost and conveyance of materials to site and all labour charges,Curing etc completeand as directed by department officials.. 15 Plasteringwith cement mortar 1:4(One cement four sand) 20mm thickincluding cost and conveyance of materials to site and including all labour charges etc complete. 16 Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris, putty, wherever required etc., complete complying with standard specification.(S.l.No.359-A) 17 Manufacturing, supplying and fixing in position steel Windows / Ventilators of the following types; outer frames and shutter frames shall be made out of steel sections confirming to IS.7452 / 1990 t of ‘Z’ section (F.7D) of size 25mm x 20mm x 3mm and mullions are made of (F4B) ‘J’ sections of size 46mm x 25mm x 3mm and sash bars shall be made of ‘T’ section (T2) of size 25mm x 22mm x 3mm. including providing handle cum latch with suitable open shall be left for its easy operation and adjustable wind stay of sufficient length shall be provided for each shutter and with necessary MS angle hold fasts welded to the outer frame and 12mm MS square guard bars shall be welded to the inner flat of the window at equal intervals not exceeding 100 mm spacing and welding 18G MS sheet for panes and including one coat of red oxide primer and charges for fixing in position including dismantling the masonry, concrete and redoing the same duly packed with concrete etc., complete and as directed by the departmental officers. 18 Window 19 Ventilator 20 Supplying, fabricating and fixing in position ofmild steel door with single/double shutters using M.S angle of size 40 x 40 x 6mm for outer framesand35 x 35 x 5mm for shutter frames,fully covered with M.S sheet of 18 gauge with M.S flat ofsize 32 x 6 mmfor internal stiffners and one number of aldrop , two numbers of tower bolts, holdfasts, hinges, handles etc.,including providing one coat of red oxide primer. The rates shall inclusive of cost of all materials labour charges for fixing the door in position by dismantling the masonry, concrete etc. and redoing the sameto the original condition duly packed with concrete etc., complete. 21 Single shutter 22 Painting new iron works with two coats of approved quality and color of synthetic enamel paint over the existing red oxide primer in all floor etc., complete as per standard specification. 23 Supplying and fixing in position white glazed Indian water closet of size 580 X 440mm of Orissa type of approved quality with P or S trap with sand cushion and forming flooring alround the closet using 40mm broken brick jellylime concrete 1:2:5 ; 100mm thick and finishing the top torequired slope and including giving necessary connection to cast iron soil pipes by dismandling masonry / RCC works and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmentalofficersetc complete as per standard specification. 24 Paving the flooring with Vitrified tiles of size 600mm x 600mm x 8mm of approved colour and qualitylaid in cement mortar 1:3 (one cement and three sand ) 20mm thick in all floors and the top pointed with the colour cement etc., complete. 25 Supplying and fixing in position Cement basedhydrualically pressed Anti-Skid tiles (pattern design) 20 mmthick in cement mortar 1:3 - 20mm thick & pointedwith same colour of cement etc., complete as per standard specification 26 Dadooing sides of walls with Glazed design tiles of size 200 x 200 x 6 mm set in Cement mortar 1:3 _ 20 mm thick and pointed with the same colour cement including cost and conveyence of all materials , labour charges etc complete as per standard specification. 27 Supply and fixing of RCC Jally including cost and conveyance of all materials labour charges etc complete as per standard specification. 28 Weathering course with Brick jelly lime concrete using 20mm gauge brick jelly in pure slaked lime ( no sand to be added ) over roof slab, the proportion of brick jelly to lime being 32 to 12.5 laid in a single layer of required thickness and slope and top well beaten with wooden beaters by constanly wetted the surface by sprinkling lime jaggary water etc complete., as per standard specification. 29 Finishing with top of roof with one course of Machine Pressed Tiles of 20mm thick of approved quality laid in cement mortar 1:3 12mm thick mixed with WPC at 2% by weight of cement used and top pointed with the same red oxide mixed mortar etc complete. As per standard specification. 30 Supply and run of 2 of 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class B) bent at both ends with necessary angle iron up right and end supports for mains SD 71 31 Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour SD 55 32 Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC.unsheathed Cu. Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with paintingof suitable Colourfor open PVC light point / fan point (For electronic regulator) (5 points per coil)SD 24 33 Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 mm x 100 mm x 113mm TW switch box in flush with wall with 3 mm thick Hylem sheet cover for 5 A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point.SD 37 34 Supply and fixing of 32 Amps DP Switch of 500V with metal clad with fuse and neutral (Side Handle) on suitableTW Board with PWD Earthing SD 143 35 Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1 x 1/8 Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1 thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. SD 125 36 supplying and fixing of ISI approved make PVC pips, Specials 37 32mm pipe 38 25mm pipe 39 20mm pipe 40 32mmTee 41 32mmbend 42 32mm Coupling 43 25mm Tee 44 25mm bend 45 25mm coupling 46 32/25mm Reducer 47 25/20mm Reducer 48 Brass Chromium Plated Screw Down Tap 15 / 12mm dia (Heavy Type)
