}

Tender For Labour Rate For Construction Of Godown, Jalandhar-Punjab

Government Departments has published Tender For Labour Rate For Construction Of Godown. Submission Date for this Tender is 08-08-2024. Godown Tenders in Jalandhar Punjab. Bidders can get complete Tender details and download the document.




Tender Notice

44146265
Corrigendum : Tender For Labour Rate For Construction Of Godown
Open Tender
Indian
Punjab
Jalandhar
08-08-2024

Tender Details

tender for LABOUR RATE FOR CONSTRUCTION OF GODOWN-- 1 Labour rate for construction of Godown 2 EARTH WORKEarth work in excavation in foundations, trenches etc. in all kinds of soil, not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation. 3 Earth is filling under floors with surplus ordinary soil or soil containing gravel excavated from foundation and / or taken only from outside the building plinth in 15 cm layers including ramming, watering and consolidating. 4 LEAN CEMENT CONCRETECement Concrete 1:3:6 with stone ballast or Shingle in under floors 5 Cement Concrete 1:4:8 with stone ballast of Size 20 mm In foundations Under plinth protections 6 BRICK WORKFirst class burnt brick work laid in cement sand mortar 1:5 in foundations and plinth 7 First class burnt brick work laid in cement sand mortar 1:5 in first storey up to 4 metres above plinth level. 8 Extra for brick work done above 4 meters (where any single storey exceeds 4 metres in height) for every additional height of 2 metres or part thereof. 9 REINFORCED CEMENT CONCRETEReinforced cement concrete M-20 with cement @375/kg per cum but excluding steel reinforcement, centring and shuttering, in foundation and plinth. 10 Reinforced cement concrete M-20 with cement @375/kg per cum but excluding steel reinforcement, centring and shuttering, in superstructure in columns (rectangular, square, circular or polygonal)in plinth beamsin tie beamsin lintels and chhajasin suspended slabs 11 STEEL REINFORCEMENTCold twisted deformed (Ribbed/ Tor steel Bar) Bars Fe500 grade for R.C.C works, where not including in the complete rate of RCC including bending and placing inposition complete. 12 SHUTTERING ( As per Site ) Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) Centring and shuttering for columns (Square or rectangular or polygonal in plain)Centring and shuttering for sides and soffits of beam, beams, lintels etcCentring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.Extra for shuttering where any single storey height exceeds 4 metres in height for every additional height of 2 metres or part thereof 13 CEMENT PLASTER12.5 mm thick cement plaster 1:4 14 20mm thick cement plaster 1:4 in two coat work 15 STRUCTURAL STEEL WORKStructural steel work in angles, tees, channels and flats, riveted or welded including cutting fixing all gusset plates, bolts, nuts, rivets, welding rod, etc. with hoisting and erecting in position for roof trusses, and trussed girders, etc. of any span for buildings up to 30 m span. 16 ROOFINGCorrugated Gl Sheet roofing 0.80 mm thick fixed with galvanized iron J or L hooks, GI Limpet and bitumen washers complete. 17 GSB (Granular Sub-Base)Construction of granular sub-base by providing close graded material grading -1, spreading in uniform layers on prepared surface, mixing at OMC, and compacting with vibratory roller to achieve the desired density, complete. 18 ROLLING SHUTTERSupplying and fixing rolling shutters of approved make, made of 80mm x 1.25mm M.S. Laths, interlocked together through their entire length, and jointed together, at the end by end locks, mounted on specially designed pipe shaft, with brackets, side guides 27.5 cm long wire spring grade No. 2 and arrangement for inside and outside locking, with push and pull operation complete, including top cover 0.80mm thick (payment is to be made for the exact size of opening; where rolling shutter is to be fixed) along with providing & fixing ball bearing, for push and pull type rolling shutters. 19 WHITE WASHINGWhite washing 3 coats on internal surfaces 20 Finishing walls with exterior decorative cement based paints such as snocem robiacem etc. two coats to give an even shade

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 25-07-2024 Change in NIT Other 31-07-2024
2 31-07-2024 corrigendum Date 08-08-2024

Key Value

Document Fees
Refer document
EMD
INR 200000.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail