Tender For Repair/Renovation And Up-Gradation Work For Invest Up Office Of 4Th Floor Side-A, Miscellaneous Work At 2Nd And 6Th Floor At Picup Bhawan, Gomti Nagar, District-Lucknow (U.P.)., 1 Repair/Renovation and Up-gradation work for Invest Up Office of 4th Floor Side-A, Miscellenous work at 2nd & 6th Floor at PICUP Bhawan, Gomti Nagar, District-Lucknow (U.P.). 2 INTERIOR WORK 3 Providing & Fixing of at all height false ceiling including providing and fixing of frame made of special section power pressed from m.s. sheet and galvonised in accordance with zinc coatingof grade 350 as per IS 277and consisting of angle cleat 25x1.6mm with flanges of 27mm and 37mmat 1200mm c/c one flangedfix to the ceiling with dash fastener 12.5mm dia and and 40mm long with 6mm dia boltto the angle hangers of 25x25x0.55 mm of required lengthened other end of angle hanger being fixed with nut and bolts to GI channel 45x15x0.90mm running at the rate of 1200 mm c/c to with the ceiling section 0.5mm thick button wedges of 80mm with tappered flenges of 26 mm each having clips of 10.5mm.at 450mmc/ cshall be fixed in direction perpendicular to GI channels with connecting clipsmade out of 2.64MM diax230mm longGI wire at every junction including fixing the gypsumboard with ceiling section and perimetre channels 0.50 mm thick 27mm high having flenges of 20mm and 30mm long ,perimeter of ceiling fixed to wall /partitionwith help of rawl plugs at 450mm c/c with 25 mm long drive all screws @230mm interval including jointing and fixingto a flush finish of tapperedend sq edge of board with recommended filler jointing and tapper finisher and two coat of primer suitable for board as per manufacturers specification and also including the cost of making of openning for light fittings grills diffusers cutouts made with frame of perimeter channelssuitably fixed all complete as per drawing and specification and direction of engineer incharge but excluding the cost of painting. 12.50mm thick tapered edge gypsum board. 4 Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing C wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with : GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation. 5 Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with Dune Max (Bevelled Tegular) Edge Tiles With Armstrong 15mm Exposed GRID.The tiles should have Humidity Resistance (RH) of 99%, NRC 0.7, Light Reflectance ≥85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 20mm , suitable for Green Building application, with Recycled content of 63%.The tile shall be laid on Armstrong Suprafine 32 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 8.8 Kgs/M2 & pull out strength of 100Kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong make. INSTALLATION: To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit using Armstrong suspension system (specifications below) at 1200mm maximum centre.The First/Last Armstrong suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module.Cut cross tees longer than 600mm require independent support.600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centres. ARMSTRONG SUSPENSION SYSTEM - Armstrong make Anchor Fastener, Hanger Wire 2.5mm dia, Hook Clip with J Wire assembly. Approved Makes - Armstrong, Shera, Nitco. 6 Providing & fixing Armstrong Vertical Linear Baffle Ceiling made out of GI Extrusion in GI alloy grade. The baffle blade shall be in size of 100x 25 x 3600mm. The baffle blade shall be suspended using Slotted U-profile at on-center spacing in multiples of 25mm. longer lengths of Baffle to be connected by Baffle Joiner and the ends to be fixed with End caps.Installation of U-Grid: The U profile to be suspended at every 1200mm on-centre using 6mm threaded rod from the structural soffit using U-profile hanger. U-profile splice to be used to join more than one U profiles of length 3.75M. 1st U-Grid Channel must be no more than 400mm from the perimeter. as per the approveddesign all complete as per drawing, specification and direction of Architect/ Engineer -in-Charge. APPROVED MAKE - Armstrong/ HiSteel/Equivalent 7 Providing and Fixing Armstrong or equivalent SoundScapes - Acoustical clouds which are 30 mm thick, flat glass fiber panelswith Humidity ResistanceRH 90% & Recycled Content of minimum 30%, come in various shape options like Square / Convex / Concave / Circle / Hexagon / Trapezoid / Parallelogram (Left & Right) / Rectangle (Small & Large) and in standard Traffic White color with LR 90% or in the color specified by the Architect / Engineer incharge (White/ Shell/ Tangerine/ Cranberry/ Moss/ Kiwi/ Reef/ Lagoon/ RAL co-ordinated*) . The size and sound absorption details are as below:Sr. No. ShapeNominal SizeSound Absorption – Metric Sabin1. Square1200x1200mm2.482. Convex1200x1200mm2.283. Concave1200x1200mm1.944. Circle 1200x1200mm2.125. Hexagon1200x1200mm1.616. Trapezoid 1200x1200mm2.157. Left Parallelogram 1200x1200mm2.158. Right Parallelogram1200x1200mm2.15The back of each panel to have embedded square frame bracket system of 610x610mm in which provisions are already made for integration of installation system for suspension of individual or grouped panels. INSTALLATION: The panels to be suspended individually using the SoundScapes Deck hanging kit. Each kit to consist of gripper structure anchors with an outer diameter of 16mm and height 23mm, aircraft cables of 1.5mm dia 2.44 LM in length and bottom end cable adjusters of 8.9mm outer diameter.Each panel to be suspended using the aircraft cables which are suspended from the soffit using the gripper structure anchors and its other end passing through the bottom end cable adjuster which are screwed in the 4 corners of the frame bracket system. The height & level of the panels can be adjusted using the bottom end cable adjusters. APPROVED MAKE - Armstrong/ Saint Gobain/ SAS 8 Providing and fixing of 12 mm ThickLaminated wooden flooringrange grand illusion/studio Classification of Use 23/32 (Heavy Domestic/Domestic) with a Surface Abrasion Resistance of class AC3 (average 4500 cycles), Impact Resistance of IC2 (EN13329), Resistance to Cigarette Burn with a rating of 5 (EN 438-2:15), Swelling after 24 hrs in water of 15% (EN13329), Modulus of Rupture of 53.3 newton/mm2, Internal Bond 1.78 newton/mm2, Surface Soundness of 1.3 newton/mm2 (EN 13329:2000) with a 0.2mm thick wear layer on top of a High Density Fiber substrate core (density > 850 Kg/M3) of plank size 1212 mm X 137 mmhaving Uni fitlocking arrangement (lock strength > 1000 lbs/ft) with an underlayment made of natural colour foam , with accessories like End profile, Transition profile, reducer, etc. complete. The rate includes cost of all materials, accessories, labour, HOM, etc., complete at all levels. (The Shade, pattern etc., to be approved by Engineer in charge)Make-FloorMaster/Armstrong/Haro. all complete as per drawing, specification and directionas approved by the Architect/ Engineer -in-Charge. Make-Armstrong,Mikasa,Luxe Equivalent 9 Supply & fixing of first radiant/first line/Japan carpet tile tufted 1/10” loop carpet tile100% PA6 solution dyed aquation backing back to back modified bitumen, 10% recycled content included,fire resistant EN-1350-1B,,S1,pile height Ca2.9 mm, total weight ca 4300 gm/m2,pile densityca 0.114gm/cm3,thermal resistant ISO8302.0.047m2 K/W,impact noise rating ISO10140(1000Hz) tile size should be (500 cm X 500 cm) duly installed on smooth and hard surface with company recommended adhesive. 10 Providing and laying of Double Charged floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x1200mm 11 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm 12 Grouting the joints of flooring tiles having joints using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. 13 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red Area of slab over 0.50 sqm 14 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. 15 Providing & Making & Fixing of Commercial Wall Panneling made with Aluminium Section of 2x1 @ 2CC frame work cladded with 12MM Ply complete with painted or polishe.as per the approveddesign all complete as per drawing, specification and directionas approved by Engineer -in-Charge. 16 Providing & Making & Fixing of Commercial Wall Partition made with Aluminium Section of 2x1 @ 2CC frame work cladded with 9MM Ply on Both Side complete with painted or polishe.as per the approveddesign all complete as per drawing, specification and directionas approved by Engineer -in-Charge. 17 Providing & Making & Fixing of Wall Panneling made with 1MM Laminate & 5.5MM MDF on Existing Surface complete with painted or polishe.as per the approveddesign all complete as per drawing, specification and directionas approved by Engineer -in-Charge. 18 Providing & Making & Fixing of Wall Panneling made with Coloured Lacquered Glass on Existing Surface complete with Melamine Polishe.as per the approveddesign all complete as per drawing, specification and directionas approved by Engineer -in-Charge. 19 Providing & Fixing of full height Single glazed partition using 10mm thick toughened Glass fixed with proprietary anodized aluminium sections of size 26x30mm (H) on top, bottom, horizontal & vertical. Rate to include required accessories as per the manufacturers specifications and shall be inclusive of all accessories like Gaskets. Glass to glass joints to be sealed with Double sided 2mm Thick transparent tape.The glasses to be butt jointed with 2 to 3mm edge chamfer & edge polishing all around.Achieving value of 31 dB. ( Rate is not included for door frames) Finish - Black Anodised, Partition Height - 2400mm, System - Micra I, Glass - 10mm Toughened Glas, Make - Liko-s 20 Providing & fixing of 12 mm Toughened Glass Door with all hardwareas per design with edge polish m/c top & bottom pivot and bottom lockwith handle all complete as per drawing, specification and directionas approved by Engineer -in-Charge. 21 Providing, fabricating & placing single leaf single swing Solid flush door with Vision panel (Laminated finish) door with 40mm thick wooden leaf. The door frame of size 70 x 50mm shall be formed with heavy duty anodised aluminium door, fixed to dry wall partition. Rate to include providing & fixing in position necessary Geze make standard stainless steel brush finished hardwares Hinges: GEZE Flush HingesHandle: Mortise lever Handle Door Closer: TS3000V Exposed door closer Drop Seal:Concealed Dropseal Athmer Lock : Mortise Lock, Cylinder: Cylinder with both side keys (with 3 keys) Floor Stop:Door stopper, System - Micra I, Shutter- 40mm thk shutter with both side laminated, Make - Liko-s 22 Supply&Fixingofwindowsmadefrommulti chambered UPVC profiles of minimum 60/108 mm thicknessof (Wintechmakeorequivalent)in natural from stailized for heat, light, impact & UV radiation. The UPVC profiles should be reinforced withgalzvanizedsteelprofilesofdesigned thickness.Floatglassofapprovedcolourin 4/5/6/8 mm or as desired by the costumer shall be fixed with heveled beads. All openable / sliding sashes shall be having grey/black colored weather seal fitted in continuous lenghts made from bubble PTV Rubber & side Hung with 90L openin friction syats of rust proof stainless steel with provision of multipoint lockng system (casement only) made from Espag rods (coated steel) all handle shall be made from die Cast zinc alloy in white finish only as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 23 Providing & Fixing of Roller Blinds with Hand Rail of approved shade as per drawing & specificationas approved by Engineer -in-Charge. 24 Providing & Fixing of Zebra Blinds with Hand Rail of approved shade as per drawing & specificationas approved by Engineer -in-Charge. 25 Providing & Fixing of Plotter Cutted Designer Film of approved shade as per drawing & specificationas approved by Engineer -in-Charge. 26 Providing & Fixing of Plotter Cutted Designer Coloured Vinyl of approved shade as per drawing & specificationas approved by Engineer -in-Charge. 27 Providing & Fixing of Wall Paper of approved shade as per drawing & specificationas approved by Engineer -in-Charge. 28 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 29 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 30 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm 31 Providing & Fixing of Square Shape Polmer Planter of Size (375Wx375Dx400HT) With Thermocol Packing & Double Layer of Pabbles With Artificial 36Plants of approved shade as per drawing & specificationas approved by Engineer -in-Charge.MR 32 Providing & Fixing of Round Shape Polmer Planter of Size (375DIA X 375HT) With Thermocol Packing & Double Layer of Pabbles With Artificial 36Plants of approved shade as per drawing & specificationas approved by Engineer -in-Charge.MR 33 Providing & Fixing of Rectangular Shape Polmer Planter of Size (600Wx325Dx375HT) With Thermocol Packing & Double Layer of Pabbles With Artificial 36Plants of approved shade as per drawing & specificationas approved by Engineer -in-Charge.MR 34 Providing & Fixing of Oval Shape Polmer Planter of Size (325DIA X 500HT) With Thermocol Packing & Double Layer of Pabbles With Artificial 36Plants of approved shade as per drawing & specificationas approved by Engineer -in-Charge.MR 35 Providing & Fixing of Oval Shape Polmer Tower Planter of Size (200DIA X 600HT) With Thermocol Packing & Double Layer of Pabbles With Artificial 36Plants of approved shade as per drawing & specificationas approved by Engineer -in-Charge.MR 36 Providing & Fixing of Oval Shape Ceramic Tower Planter of Size (200DIA X 600HT) With Thermocol Packing & Double Layer of Pabbles With Artificial 60Plants of approved shade as per drawing & specificationas approved by Engineer -in-Charge.MR 37 Providing & Fixing of Photo Frames Having Size (1200WX450HT) of Varanasi Picture in Coloured Canvas Printswith wooden frame borders & Non Reflective glasscomplete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 38 Providing & Fixing of Photo Frames Having Size (600WX900HT) of Picture in Coloured Canvas Printswith wooden frame borders & Non Reflective glasscomplete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 39 Providing & Fixing of Photo Frames Having Size (1200WX750HT) of Varanasi Picture in Coloured Canvas Printswith wooden frame borders & Non Reflective glasscomplete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 40 Providing & Fixing of Photo Frames Having Size (500WX375HT) of Varanasi Picture in Coloured Canvas Printswith wooden frame borders & Non Reflective glasscomplete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 41 Providing & Fixing of Photo Frames Having Size (600WX600HT) of Uttar Pradesh Sarkar in Black & White/Coloured Canvas Printswith wooden frame borders & Non Reflective glasscomplete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 42 Providing & Fixing of Photo Frames Having Size (650WX650HT) of Uttar Pradesh Sarkar in Black & White/Coloured Canvas Printswith wooden frame borders & Non Reflective glasscomplete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 43 Providing & Fixing of Photo Frames Having Size (400WX400HT) of Shri Ram Mandirin Black & White Canvas Printswith wooden frame borders & Non Reflective glasscomplete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 44 Providing & Fixing of Photo Frames Having Size (725WX725HT) of Sandwitched Flower in Colour Canvas Printswith wooden frame borders & Non Reflective glasscomplete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 45 Providing & Fixing of Photo Frames Having Size (475WX1200HT) of Invest UP in Colour Canvas Printswith wooden frame borders & Non Reflective glasscomplete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 46 Providing & Fixing of Photo Frames Having Size (450WX600HT) of Invest UP in Colour Canvas Printswith wooden frame borders & Non Reflective glasscomplete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 47 Providing & Fixing of Photo Frames Having Size (400WX600HT) of Invest UP in Colour Canvas Printswith wooden frame borders & Non Reflective glasscomplete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 48 Providing & Fixing of Signages of Size (1500 x 188)MM Made of 12mm Corian CNC Cut Letters & Fixed on Existing Wall Surface of INVEST UP, complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 49 Providing & Fixing of Signages of Size (1175 x 350)MM Made of Multi Layered Signage made with 5mm & 3mm Thick Acrylic & UV Prints on Base Acrylic & Acrylic Letters of INVEST UP LOGO, complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 50 Providing & Fixing of Signages of Size (200 x 200)MM Made of Side Moulded Signages made with Premium Laminate & Acrylic Laser Cut Letters as per deisgn & Multi Layering with Wooden Finish as base of Male, Female Toilet & Pantry, complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 51 Providing & Fixing of Signages of Size (450 x 200)MM Made of Side Moulded Signages made with Premium Laminate & Acrylic Laser Cut Letters as per deisgn & Multi Layering with Wooden Finish as base of Conference Hall, complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 52 Providing & Fixing of Signages of Size (2400 x 1200)MM Made of UV Prints on Lacquered Glass with Pre Coat & 3 Layer Prinitng of Invest UP Logo, complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 53 Providing & Fixing of Signages of Size (350 x 200)MM Made of 3 Layer Name Plates made with Black Acrylic as base & UV Prints on Clear Acrylic as 2nd Layer & 3rd Layer being Acrylic Letters of IIDC, CEO & ACEO Room, complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 54 Providing & Fixing of Signages of Size (875 x 875)MM Made of 6mm Clear Acrylic Laser Cut with UV Prints from Back Side & Heavy White Ink as base & fixed with Spacers, complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 55 Providing & Fixing of Signages of Size (1200 x 600)MM Made of 3D Embossed Acrylic Letters with Multi Layering made with Acrylic & ACP & UV Prints of Invest UP Logo, complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 56 Providing & Fixing of Signages of Size (600 x 150)MM Made of UV Prints on Clear Acrylic Sheet 3mm Black Acrylic Laser Cut Letters Invest UP, complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 57 Providing & Fixing of Signages of Size (600 x 75)MM Made of UV Prints on Clear Acrylic Sheet 3mm Black Acrylic Laser Cut Letters 2nd, 4rth & 6th Floor, complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 58 Furniture Work 59 Table of Size - 1800W X 900D X 750HT Having Side Storage of - 900W X 450D X 750HT & Back Storage of - 1350W X 450D X 750HT & 450 Extended Top Specifications Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge Lipping on all exposed edges (Straight/Reverse waterfall edge) Support: End Legs : Powder coated Al die casted Enrich legs Modesty Panel: 18mm thk pre lam board with 2mm PVC edge lipping of 450mm Ht. Wire Management: 450mm Aluminium Flip Up and provision to mount swicthes and sockets on PVC cable dump and Vertical wire entry cover or vertebra for wire uptake from floor to cable dump The storage will be made in 18 MM PLB (Pre laminated board) with the density of 680kg/m³ and 18 mm thick one side pre-laminate board confirming to IS 12406 : 2013. Surface: CPL (continuous pressure laminate) in 0.5mm thickness in melamine finish. The PLB will be confirming to E-1 Grade as per the JIS A 5905-2003 standards and approved shade confirming to IS-12823:1990.The back of storage will be made in 9 MM PLB (Pre laminated board) with the density of 680kg/m³ and 18 mm thick one side pre-laminate board confirming to IS 12406 : 2013. Surface: CPL ( continuous pressure laminate) in 0.5mm thickness in melamine finish. Storgage will be provided with edge banding 2 mm thick PVC edge band will confirm to DIN 68861 for resistance to clearers. The Hot melt glue used for fixing the PVC edge band should have ISO 9001- 2015 quality certification and confirm to ASTM D 4499 standards for viscosity and thermal stability. The edge band material should have Shore D hardness of 79± 4. storage will have two adjustable shelves 60 Table of Size - 1500W X 750D X 750HT Having Side Storage of - 900W X 450D X 750HT. The main table shall be made of 25mm thick PLB one side pre-laminate board confirming to IS-14587:1998. Soft closing access flap with in-built power box to be provided on work surface for wire management. Return table Work Surface should be made of 25mm thick PLB one side pre-laminate board confirming to IS-14587:1998. PLB will be E1-P2 grade and approved shade. Confirming to IS-12823:1990. 2 mm thick PVC edge band will confirm to DIN 68861 for resistance to clearers. The edge band material should have Shore D hardness of 79± 4. The Hot melt glue used for fixing the PVC edge band should have ISO 9001- 2015 quality certification confirming to ASTM D 4499 standards for viscosity and thermal stability. The edges should be PVC Edge banded with matching finish or have an option of reverse water fall edges.Modesty Panel shall be made of 18mm thick PLT both sides pre-laminate board confirming to IS-14587:1998.The height of modesty shall be 450 mm.The modesty panel will be connected to the main table by 2 nos special Aluminum extruded brackets. The modesty will be fixed 150 mm from the edge of the table. • Cable management: The table will be provided with suitable grommet hole. Legs and Supports:- The MS supports are made of 55 x55mm diamond shape loop leg ERW tubes- 16g with levelers to cater for floor undulations- +/- 20 mm. ERW Tube confirming to IS 4923 : 1997 – 16g. Main leg members will be connected through a horizontal member size 1.6mm thk, 60x40 cold formed ERW tube confirming to IS 4923: 1997. The vertical and the horizontal tubes will be welded with CO2 MIG welding process confirming to IS 816 and ISO 9692-2. The leg will be fabricated using Argon & Co2 gas mixture on a Robotic welding machine to ensure adequate welding strength with consistency.• The legs will be connected with Cross beams to take care of the bending stress catering up to 1800 mm length and up to 900 mm depth of the work surface. Finish:- All metal components & aluminum die cast parts will be powder coated by Nano ceramic surface treatment process compiled to a Bend test-ASTM D3451 – 06, Adhesion -DIN EN 14901 Salt spray test- DIN EN ISO 9227, which is non-hazardous, environmental friendly and will have uniform powder coating thickness of 50-60-micron thickness.Wire Management: 61 LINEAR WORKSTATIONSSIZE:- 1350W X 600D X 750HT AND 300HT HEIGHTSpecifications: Table Top - 25mm thick Pre Lam particle board with 2mm edge lipping on all exposed sides. Support - MS powder coated diamond shape leg of 55X55mm size with die cast connectors and supporting MS cross beams. Main Screen:- Aluminum anodised 30mm scree n with fabric magnetic and glass marker tiles. Privacy Screen:- 6mm thick acrylic screen on studs. Wiremanagement - 450mm metal flip up with provision to mount switches and sockets on MS cable tray and vertical wire entry cover between the intermeidate leg for power and data. 62 DUSCUSSION TABLE SIZE:- 1050DIA X 750HTSpecifications Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges (Straight/Reverse waterfall edge) Support End Legs: Enrich Leg Intermediate Legs: MS podwer coated 60X40mm legs and supporting ms cross beams Wire Management:Continuous PVC Cable Tray with provision to mount switches and sockets as per client requirement. , Vertical wire entry cover for wire uptake from floor to cable tray and 450mm Aluminium Flip Up for swicth access.Make-Featherlite/Geeken/Hof/Equivalent 63 DISCUSSION TABLE SIZE:- 2400W X 1050D X 750HTSpecifications Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support: End Legs: MS powder coated legs Intermediate Legs: MS podwer coated 60X40mm legs and supporting MS cross beams (40X20mm) Wire Management: Continuous PVC Cable Tray with provision to mount switches and sockets as per client requirement. Vertical wire entry cover for wire uptake from floor to cable tray and 450mm Aluminium Flip Up for swicth access. MODEL:-ENRICH,Make-Featherlite/Geeken/Hof/Equivalent 64 High Back Chairs Seat and back is made out of 12mm molded hot pressed plywood in ergonomic shape fitted with Imported T-nuts and revited in to the wood.Gaslift - Class 4 tested -ANSI BIFMA performance standards.Castors - Twin Castors 50mm dia castors compling to ANSI / BIFMA X 5.1 – 2002.The 640mm dia (26 inches) five pronged base is made out of GF nylon – Reinforced with bottom ribbing for additional buttress and strength.Tested prudently and rigorously as per ANSI/BIFMA X5.1-2011 General Purpose Office Chair Standards.Upholstery: Seat Cushion with pre moulded foam having leatherette tapestery of 50 - 60 density Density -- 52 kg/m3 Hardness -- 12.6kgf at 25%.Distinctively and characteristically designed tilt mechanism offering a very smooth and fluidic reclining motion with tension adjust knob and importantly offering seat to back recline ratio of 3:7, optimal for good back support.Multilock mechanism is fabricated from CR Sheets, undergo through CO2 welding process imparting uniform surface finish and tensile strength. The components are processed with high degree of precision and care so as to assemble with other parts in perfect harmony to give smooth and effortless reclining experience. Tension springs are made out Grade II material conforming to Indian Standards. Also provided with release levers for locking mechanism and height adjustment of seat. Mechanism aides to operate the height adjustment, and has been equipped with 3 locking positions, back rest “ Return Prevention” function. Back Frame is inserted with leathertte tapestery cushion & Adjustable Lumbar Support.Tension control is below the Seat.Moulded polyurethene Arms confirming to IS 7078 with steel inserts for long Moulded self skinned polyurethene Arms confirming to IS 7078 with steel insets for long life. one way adjustable - Height Adjustable.Seat is duly upholstered with approved fabric. Chair will have adjustable headrestChair Should be BIFMA Certified.Seat: Depth- 51.5 cm Width- 44.5 cm Dimensions: Width- 51.5 cm Depth- 53.5 cm Minimum Height- 99.5 cm Maximum Height- 108.5 cm Minimum Seat Height- 44.5 cm Maximum Seat Height- 52.5 cm Width (Arm to Arm)- 66 MODEL, Chair should be BIFMA and Green Guard certified.:- AMAZE HB, Make-Featherlite/Geeken Equivalent. 65 Medium Back Chairs Seat and back is made out of 12mm molded hot pressed plywood in ergonomic shape fitted with Imported T-nuts and revited in to the wood.Gaslift - Class 4 tested -ANSI BIFMA performance standards.Castors - Twin Castors 50mm dia castors compling to ANSI / BIFMA X 5.1 – 2002.The 640mm dia (26 inches) five pronged base is made out of GF nylon – Reinforced with bottom ribbing for additional buttress and strength.Tested prudently and rigorously as per ANSI/BIFMA X5.1-2011 General Purpose Office Chair Standards.Upholstery:Seat Cushion with pre moulded foam having leatherette tapestery of 50 - 60 density Density -- 52 kg/m3 Hardness -- 12.6kgf at 25%.Distinctively and characteristically designed tilt mechanism offering a very smooth and fluidic reclining motion with tension adjust knob and importantly offering seat to back recline ratio of 3:7, optimal for good back support.Multilock mechanism is fabricated from CR Sheets, undergo through CO2 welding process imparting uniform surface finish and tensile strength. The components are processed with high degree of precision and care so as to assemble with other parts in perfect harmony to give smooth and effortless reclining experience. Tension springs are made out Grade II material conforming to Indian Standards. Also provided with release levers for locking mechanism and height adjustment of seat. Mechanism aides to operate the height adjustment, and has been equipped with 3 locking positions, back rest “ Return Prevention” function. Back Frame is inserted with leathertte tapestery cushion & Adjustable Lumbar Support.Tension control isbelow the Seat.Moulded polyurethene Arms confirming to IS 7078 with steel inserts for long Moulded self skinned polyurethene Arms confirming to IS 7078 with steel insets for long life. one way adjustable - Height Adjustable.Seat is duly upholstered with approved fabric. Chair Should be BIFMA Certified.Seat: Depth- 51.5 cm Width- 44.5 cm Dimensions: Width- 51.5 cm Depth- 53.5 cm Minimum Height- 99.5 cm Maximum Height- 108.5 cm Minimum Seat Height- 44.5 cm Maximum Seat Height- 52.5 cm Width (Arm to Arm)- 66 cm Arm Rest Height- 18- 27.5 cm Chair should be BIFMA and Green Guard certified. AMAZE MB, Make-Featherlite/Geeken Equivalent. 66 Medium Back chair Having Base: Nylon Base- The 640mm dia (26 inches) five pronged base is made out of GF nylon – Reinforced with bottom ribbing for additional buttress and strength. Tested prudently and confirming to ANSI/BIFMA X5.1-2011 General Purpose Office Chair Standards. The base shall be 67 cm pitch-center diameter -77 cm with castors. MS ring will be insert molded for better grip in the swaged taper. Castors: Twin Castors 50mm dia complying to ANSI / BIFMA X 5.1 – 2002. Castors will be made in PP.The axle pin will be rust protected- Zinc pacified. The pin should be designed to have push fit with lock ring. RoHS compliant castors. Gas lift: Standard Gas lift 100 mm stroke with pneumatic height adjustment as per the seat height criteria.- Class 4 as per ANSI BIFMA performance standards. Possibility to increase the seat height if required with Gas lift stroke- 110 -125 mm. Mechanism:Centre Tilt Mechanism:compact and stable with 8″ x 6″ mount holes as per European Standard. Initial seat angle of 3 degrees and full recline angle of 20 degrees for ergonomic comfort. Provided with common leverfor locking and up/down adjustment and horizontal movement of the lever to engage and disengage lock at upright positionLever provided for rotational movementto operate gas lift and adjust chair height to user specification. Full length plastic knob provided to cover lever bar giving better aesthetical appeal to the mechanism. Knob provided to adjust spring tension to suit individual user in order to ensure maximum chair comfort. Arms:Fixed Arms Injected molded arms- polyurethane 20% GF nylon. The polypropylene arms will have steel inserts. The arm profile should blend with the back profile without gap. Seat: Seat Height- 450-540mm with hydraulic height adjustability of 90-100mm. Seat Width & Height- Size of the chair shall be -Back: 45.0cm. (w) x 59.0cm.(H) .Seat: 48.0cm (w) X 49.0cm.(D). Chair back should be connected to the Polyurethane arms for achieving comfortable seating posture.Effective back height from Seat - 560mm, Ply wood- 12 mm thick with 7 ply. Fire retardant type exterior grade phenol formaldehyde bonded. It will be hot pressed ply - conforming to I.S.I. 5509. The arm and back shall be fixed together to the seat with Allen bolts.The bolts will be screwed to the “T” nuts fixed to the plywood seat.Fabric: Upholstery:Seat & Back are duly upholstered with approved fabric. The back should have the option of mesh back AN-70 (black) and AN-75(grey). GSM for mesh 340. No flaming or progressive smolderingwithin one hour of placement of the cigarettes. Fire rated fabric confirming to BSEN 1021 and IS 15061-2012 Foam: Seat cushion with pre molded foam of 50 - 60 density in the shape of plywood.Density -- 52 kg/m3, Hardness -- 12.6kgf at 25%- Back cushion- density- 32g/sq in. Back:Mesh back on injected molded PP with 30% GF nylon. The back should have the option of mesh or fabric back. The mesh will be GSM 340 grade. . ALPHA MB, Make-Featherlite/Geeken Equivalent. 67 Single Seater Sofa of Size: 875 (W) x 750 (D) X 820 (H) Seat Foam: the sofa is made up of fine quality leatherette.The structure is made up of silver wood and pine wood.The Seat is made of PU Foam with Density 32 to 40 +/- 2 kg/cu .mtr Seat is upholstered wuth Leatherite.Back Foam: The Back is made of PU Foam with Density 32 to 40 +/- 2 kg/cu, Backis upholstered withLeatherite.Unterstructure is made up of silver wood or pine wood , 4mm Dia zigzag Spring is mounted in the understructure for support and additional cushioning purpose. Legs should be made up of stainless steel tubes/pipes., CONVERSE, Make-Featherlite/Geeken Equivalent. 68 Two Seater Sofa of Size:1320 (W) x 750 (D) X 820 (H) Seat Foam: the sofa is made up of fine quality leatherette.The structure is made up of silver wood and pine wood.The Seat is made of PU Foam with Density 32 to 40 +/- 2 kg/cu .mtr Seat is upholstered wuth Leatherite.Back Foam: The Back is made of PU Foam with Density 32 to 40 +/- 2 kg/cu, Backis upholstered with Leatherite.Unterstructure is made up of silver wood or pine wood , 4mm Dia zigzag Spring is mounted in the understructure for support and additional cushioning purpose. Legs should be made up of stainless steel tubes/pipes., CONVERSE,Make-Featherlite/Geeken/Hof/Equivalent 69 Corner Table ofSIZE:- 550W X 550D X 400D Table top made out of stoneBase/ Understructure:- Made up of MSand will be powder coated by Nano ceramic surface treatment process compiled to a Bend test-ASTM D3451 – 06, Adhesion -DIN EN 14901 Salt spray test- DIN EN ISO 9227, which is non-hazardous, environmental friendly and will have uniform powder coating thickness of 50-60-micron thickness, CT-867, Make-Featherlite/Geeken Equivalent. 70 Side Storage of Size 900Wx450Dx1200HT will be made in 18 MM PLB (Pre laminated board) with the density of 680kg/m³ and 18 mm thick one side pre-laminate board confirming to IS 12406 : 2013. Surface: CPL ( continuous pressure laminate) in 0.5mm thickness in melamine finish. The PLB will be confirming to E-1 Grade as per the JIS A 5905-2003 standards and approved shade confirming to IS-12823:1990.The back of storage will be made in 9 MM PLB (Pre laminated board) with the density of 680kg/m³ and 18 mm thick one side pre-laminate board confirming to IS 12406 : 2013. Surface: CPL ( continuous pressure laminate) in 0.5mm thickness in melamine finish. Storgage will be provided with edge banding 2 mm thick PVC edge band will confirm to DIN 68861 for resistance to clearers. The Hot melt glue used for fixing the PVC edge band should have ISO 9001- 2015 quality certification and confirm to ASTM D 4499 standards for viscosity and thermal stability. The edge band material should have Shore D hardness of 79± 4. storage will have two adjustable shelves making 3 compartments.The shutters are fitted with auto closing hinges.Central locking system , levellers & other necessary hardware are priovided.Handles will be hand grooved, Make-Featherlite/Geeken Equivalent. 71 Side Storage of Size 900Wx450Dx750HT will be made in 18 MM PLB (Pre laminated board) with the density of 680kg/m³ and 18 mm thick one side pre-laminate board confirming to IS 12406 : 2013. Surface: CPL ( continuous pressure laminate) in 0.5mm thickness in melamine finish. The PLB will be confirming to E-1 Grade as per the JIS A 5905-2003 standards and approved shade confirming to IS-12823:1990.The back of storage will be made in 9 MM PLB (Pre laminated board) with the density of 680kg/m³ and 18 mm thick one side pre-laminate board confirming to IS 12406 : 2013. Surface: CPL ( continuous pressure laminate) in 0.5mm thickness in melamine finish. Storgage will be provided with edge banding 2 mm thick PVC edge band will confirm to DIN 68861 for resistance to clearers. The Hot melt glue used for fixing the PVC edge band should have ISO 9001- 2015 quality certification and confirm to ASTM D 4499 standards for viscosity and thermal stability. The edge band material should have Shore D hardness of 79± 4. storage will have two adjustable shelves making 3 compartments.The shutters are fitted with auto closing hinges.Central locking system , levellers & other necessary hardware are priovided.Handles will be hand grooved, Make-Featherlite/Geeken Equivalent. 72 Side Storage of Size 1200Wx450Dx750HT will be made in 18 MM PLB (Pre laminated board) with the density of 680kg/m³ and 18 mm thick one side pre-laminate board confirming to IS 12406 : 2013. Surface: CPL ( continuous pressure laminate) in 0.5mm thickness in melamine finish. The PLB will be confirming to E-1 Grade as per the JIS A 5905-2003 standards and approved shade confirming to IS-12823:1990.The back of storage will be made in 9 MM PLB (Pre laminated board) with the density of 680kg/m³ and 18 mm thick one side pre-laminate board confirming to IS 12406 : 2013. Surface: CPL ( continuous pressure laminate) in 0.5mm thickness in melamine finish. Storgage will be provided with edge banding 2 mm thick PVC edge band will confirm to DIN 68861 for resistance to clearers. The Hot melt glue used for fixing the PVC edge band should have ISO 9001- 2015 quality certification and confirm to ASTM D 4499 standards for viscosity and thermal stability. The edge band material should have Shore D hardness of 79± 4. storage will have two adjustable shelves making 3 compartments.The shutters are fitted with auto closing hinges.Central locking system , levellers & other necessary hardware are priovided.Handles will be hand grooved, Make-Featherlite/Geeken Equivalent. 73 Storage With Planter of Size 750W x 450D x 1050+150HT With storage will be made in 18 MM PLB (Pre laminated board) with the density of 680kg/m³ and 18 mm thick one side pre-laminate board confirming to IS 12406 : 2013. Surface: CPL ( continuous pressure laminate) in 0.5mm thickness in melamine finish. The PLB will be confirming to E-1 Grade as per the JIS A 5905-2003 standards and approved shade confirming to IS-12823:1990.The back of storage will be made in 9 MM PLB (Pre laminated board) with the density of 680kg/m³ and 18 mm thick one side pre-laminate board confirming to IS 12406 : 2013. Surface: CPL ( continuous pressure laminate) in 0.5mm thickness in melamine finish. Storgage will be provided with edge banding 2 mm thick PVC edge band will confirm to DIN 68861 for resistance to clearers. The Hot melt glue used for fixing the PVC edge band should have ISO 9001- 2015 quality certification and confirm to ASTM D 4499 standards for viscosity and thermal stability. The edge band material should have Shore D hardness of 79± 4. storage will have two adjustable shelves making 3 compartments.The shutters are fitted with auto closing hinges.Central locking system , levellers & other necessary hardware are priovided.Handles will be hand grooved, Make-Featherlite/Geeken Equivalent. 74 Storage With Planterof Size 900W x 450D x 1050+150HT With storage will be made in 18 MM PLB (Pre laminated board) with the density of 680kg/m³ and 18 mm thick one side pre-laminate board confirming to IS 12406 : 2013. Surface: CPL ( continuous pressure laminate) in 0.5mm thickness in melamine finish. The PLB will be confirming to E-1 Grade as per the JIS A 5905-2003 standards and approved shade confirming to IS-12823:1990.The back of storage will be made in 9 MM PLB (Pre laminated board) with the density of 680kg/m³ and 18 mm thick one side pre-laminate board confirming to IS 12406 : 2013. Surface: CPL ( continuous pressure laminate) in 0.5mm thickness in melamine finish. Storgage will be provided with edge banding 2 mm thick PVC edge band will confirm to DIN 68861 for resistance to clearers. The Hot melt glue used for fixing the PVC edge band should have ISO 9001- 2015 quality certification and confirm to ASTM D 4499 standards for viscosity and thermal stability. The edge band material should have Shore D hardness of 79± 4. storage will have two adjustable shelves making 3 compartments.The shutters are fitted with auto closing hinges.Central locking system , levellers & other necessary hardware are priovided.Handles will be hand grooved, Make-Featherlite/Geeken Equivalent. 75 Printer Table With Storageof Size 900W x 600D x 750HT With storage will be made in 18 MM PLB (Pre laminated board) with the density of 680kg/m³ and 18 mm thick one side pre-laminate board confirming to IS 12406 : 2013. Surface: CPL ( continuous pressure laminate) in 0.5mm thickness in melamine finish. The PLB will be confirming to E-1 Grade as per the JIS A 5905-2003 standards and approved shade confirming to IS-12823:1990.The back of storage will be made in 9 MM PLB (Pre laminated board) with the density of 680kg/m³ and 18 mm thick one side pre-laminate board confirming to IS 12406 : 2013. Surface: CPL ( continuous pressure laminate) in 0.5mm thickness in melamine finish. Storgage will be provided with edge banding 2 mm thick PVC edge band will confirm to DIN 68861 for resistance to clearers. The Hot melt glue used for fixing the PVC edge band should have ISO 9001- 2015 quality certification and confirm to ASTM D 4499 standards for viscosity and thermal stability. The edge band material should have Shore D hardness of 79± 4. storage will have two adjustable shelves making 3 compartments.The shutters are fitted with auto closing hinges.Central locking system , levellers & other necessary hardware are priovided.Handles will be hand grooved, Make-Featherlite/Geeken Equivalent. 76 Steel almirah for office purpose in perfectly upright and straight position. The overall size of the almirah shall be 900mm (W) X 450mm (D) X 2015mm (H) including legs. It should be supplied with 4 nos. of adjustable shelves i.e. 5 loading compartments. Each compartment shall be 400 mm high. Door shall be made of 1mm thick and all other components shall be made of 0.8mm thick high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. Proper stiffeners shall be provided in shelf & door. The steel hinged door shall be provided with lever handle & 3 way locking mechanism with 6 lever lock with Key. The shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity.Uniformly distributed load capacity per each shelf shall be 40kg maximum. Metal Part should be pre treated with Iron Phosphating with powder coating of 60-80mm thickness, Make-Featherlite/Geeken Equivalent. 77 Electrical Work 78 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group A 79 Supply and fixing of Power point and Supply and fixing of power plug with 10 Amp./250 volt flush type modular switch and 5 pin 10A /250 volt flush type universal modular socket switch on concealed M.S. box including supply of all material, labour t&P etc. required for proper completion of work. 80 Supply and fixing of wire, Power point and Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 nA/250 volt flush typ[e universal modular socket switch on concealed M.S. box including supply of all material, labour t&P etc. required for proper completion of work. 81 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 82 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 83 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 4.0 sq. mm + 1 X 4.0 sq. mm earth wire 84 Supplying & Drawing co-axial TV cable RG-6 grade, 0.7 mm. solidcopper conductor, PE insulated] shielded with fine finned copper braid and protected with PVC sheath in the existing surface/ recessed steel/PVC conduit as required. For T.V. Socket outlet 85 Supply & Fixing of following sizes of medium class PVC conduit alongwith accessories in sueface/recess including cutting the wall & making it good the same in case of recessed conduit as required. 20MM 86 Supply & Fixing of following sizes of medium class PVC conduit alongwith accessories in sueface/recess including cutting the wall & making it good the same in case of recessed conduit as required. 25MM 87 Supply & Fixing of following sizes of medium class PVC conduit alongwith accessories in sueface/recess including cutting the wall & making it good the same in case of recessed conduit as required. 32MM 88 Supply and fixing of recess mounting round15 TO 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. CAT-AAA 89 Supply and fixing of 36 Watt to 46 Watt above 3300 leumin indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect. CAT-AAA 90 Supplying & fixing of TV Antenna socket on Modular Plate & G.I Box including connections 91 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required, 1 or 2 Module 92 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required, 3 Module 93 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required, 4 Module 94 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required, 6 Module 95 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required, 8 Module 96 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required, 12 Module 97 Blank plate for modular plate type switch boards wherever required. 98 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 25 Sqmm 3.5 core 99 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 35 Sqmm 3.5 core 100 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 70 Sqmm 3.5 core 101 Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer- Incharge. 25 sq. mm 3-1/2 core 102 Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer- Incharge. 35 sq. mm 3-1/2 core 103 Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer- Incharge. 70 sq. mm 3-1/2 core 104 Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 25 sq. mm 105 Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 35 sq. mm 106 Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 70 sq. mm 107 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 108 S&F of 100 Amp 4 pole MCCB (25 KA) Thermal Magnetic release 109 S&F of 125 Amp 4 pole MCCB (25 KA) Thermal Magnetic release 110 S & F surface/Flush mounting 6ways VTPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge. 111 S & F surface/Flush mounting 8ways VTPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge. 112 S & F surface/Flush mounting 12ways V TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT-A 113 Providing Drawing Connecting And Testing Of Enhanced Categoey 4 Pair Lan Local Area Network Cable 24 AWG Conductor Performance Specifide 5E U L and CUL Listed In Existing PVC Conduit .(CAT-6 Network Cable) 114 Supply & Fixing of LED Profile Light all complete as per drawing and specification and direction of engineer incharge. Make-Ledadvance/Ledos/Ledlum/Philips, Equivalent 115 Supply & Fixing of LED Profile Light Driver all complete as per drawing and specification and direction of engineer incharge. Make-Ledadvance/Ledos/Ledlum/Philips, Equivalent 116 Supply and fixing of 400mm Wall Fan all complete as per drawing and specification and direction of engineer incharge. Make-Crompton/Bajaj/Havels Equivalent 117 Supply and fixing of 250mm Fresh Air Fan all complete as per drawing and specification and direction of engineer incharge. Make-Crompton/Bajaj/Havels Equivalent 118 Supply and Fixing of Deep Recess Mounting round 10 Watt COB LED Spot Light having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. Make-Ledadvance/Ledos/Ledlum/Philips, Equivalent 119 Supply & Fixing of Hanging Light all complete as per drawing and specification and direction of engineer incharge. Make-Ledadvance/Ledos/Ledlum/Philips, Equivalent 120 Providing & Fixing of Modular plate type white RJ 45 CAT 6 Data/Talephone outlet / information outlets ETL verified to meet or exceed TIA / EIA category 6 requirements, universal wiring label permitting to either T568A or T568B, UL listed,for computer networkingcomplete in all respect with cover plate, grid plate, screws, MS box, etc with connections as required with 2nos RJ-45 Data outlet 121 Supply of 250 KVA Three Phase 415 V silent DG Set comprising of CUMMINS engine model qsb6.7g17 coupled to STAMFORD make 250 KVA Three Phase 415 V alternator both mounted on common base frame alongwith fuel tank, Manual panel, battery with lead, AVM Pads, Residential Silencer etc. which will be mounted on a reinforced steel base frame, the DG set is securely anchored to a strong concrete base engineered for specific site conditions and load requirements. The base frame features isolation mounts or pads for vibration dampening, ensuring smooth and quiet operation. and the price including loading & un-loading and installation and conections. 122 Supplying, Installation, Testing and commissioning of dust, damp and vermin proof cubicle free floor, indoor type factory built sheet steel enclosed modular bolted construction extendable type LT CUM AMF Panel, suitable for operation on 415 ±10%volts, 50 Hz AC 3 phase 4 wire supply system fabricated out of suitable sized square tubular section andcoveredwith CRCA sheet steel of 2mm thick for frame work and 1.6mm covers (non load bearing), 2mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having extensible type TPNAluminium bus bars of high conductivity, SMC bus bar supports, with bottom base channel of section not less than ISMC 75mm, fabrication shall be done in transportable sections, entire panel shall have a common G.I. earth bus bar to switch gears with required size of Alum. bus bars and inter-connectionwith solid copper conductor wires / aluminium strips, neutral links, including control wiring with 1.5 / 2.5sqmm. PVC insulated FRLS copper conductor Single Core cable, cable alleys, cable gland plates in two half, etc. necessary metering protections & indications and mounted with the following switch gears as per drawingandtechnical specifications etc. 123 Supplying, Installation, Testing and commissioning of dust, damp and vermin proof cubicle free floor, indoor type factory built sheet steel enclosed modular bolted construction APFC Panel, fabricated out of suitable sized square tubular section andcoveredwith CRCA sheet steel of 1.6mm thick for frame work and 1.6mm covers (non load bearing), 2mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade. 124 LTDB 125 Supplying, Installation, Testing and commissioning of dust, damp and vermin proof cubicle free floor, indoor type factory built sheet steel enclosed modular bolted construction LTDB, fabricated out of suitable sized square tubular section andcoveredwith CRCA sheet steel of 1.6mm thick for Enclosure, 2mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade. 126 CABLES 127 Supply and laying of aluminium conductor PVCinsulated armoured served sheathed cables 1100 Voltsgrade at a depth of 750 mm below ground level over acushion of 75 mm. thick sand all around and protectedwith burnt bricks on sides and on top. On surface the cablerun shall be fixed on M.S. clamps etc. of suitable size oras directed by the Engineer-Incharge, complete in allrespect. The armouring of the cable shall be properlyconnected with the earth conductor by clamps etc.. 185 sq. mm 3-1/2 core 128 Supply of 2.5SQMM 4 core copper flexible cable 129 Supply of 50SQMM 1 core copper flexible cable 130 END TERMINATION 131 185Sqmm End termination with materials 132 EARTHING 133 GI Earthing 134 Copper Earthing 135 Supply & Laying of 25X3 GI strip with nut bolt & washers 136 LABOUR CHARGE 137 FIRE DETECTION AND ALARM SYSTEM 138 supplying , installation , Testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. 139 supplying , installation , Testing & commissioning of manual call boxes of MS construction in surface/recess with strainless steel chain & hammer assembly complete with glass and push button etc. as required. 140 supplying , installation , Testing & commissionin response indicator on surface/recess Ms box having two LEDs mettallic cover complete with all connections etc. as required. 141 supplying , installation , Testing & commissionin fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching trasformer etc. complete as required. 142 supplying , installation , Testing & commissioning of main controland indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement , audio and visual indication for fire alarm and public adress system, monitoring system including connections, interconnections etc complete as required. 10 zone panel for fire alarm system 250 Watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required-2 Nos. ( one to act asstanby) Talk back master stationwith LED PTT ( press to talk ) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/ communication suitable for 20 Nos. talk back unit-1 set. Anouncement control desk suitable for selection of different zones selectively and on ALL CALL switch with visual indication etc. complete as required -1 set Amplifier change over switch for inter changing amplifier -1 No. Monitor panel for loudspeaker complete with output selector, ON/OFF switch, fuse, visual indications etc. complete as required-1 NO. Gooseneck microphone with stand and ON/OFF switch -1 N0. Main ON/OFF switch, fuse indication lamps, DC and AC voltmeter & ammeters , terminal blocks etc. complete as required-1 set Battery charger trickle cum boost to talk complete load of fire alarm PA system complete with all accessories including providing & fixing of 2 nos. 12 volt, 60 AH each sealed maintenanance free batteries-1 set. 143 supplying , installation , Testing & commissionin of main control and indicating panel made out of 16 SWG MS sheet to accommodete the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public adress system, monitoring system including connections, interconnections etc complete as required. 6 zone panel for fire alarm system 100 watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all talk back master station with LED PTT ( press to talk ) push buttonfor operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/ communication suitable for 20 Nos. talk back unit-1 set. annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc, complete as required-1 set Amplifier change over switch for inter changing amplifier-1 No. Monitor panel for loudspeaker complete output selector ON/OFF switch, fuse visual indications etc. complete as required -1 No. Gooseneck microphone with stand and ON/OFF switch-1 No. Mains ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters terminal blocks etc. complete as required-1 set. Battery charger trickle cum boost to take complete load of fire alarm PA system complete with all accessories including providing & fixing of 2 nos. 12 volt, 30 AH each sealed mainenance free batteries-1 set. 144 supplying , installation , Testing & commissioning of fire fighter telephone handset complete as required. 145 PUBLIC ADDRESS SYSTEM 146 supplying , installation , Testing & commissioning of 6 zone, voice alarm controller with USB, MP3 playaer ( including 6 zone button paging station ) with seamless intergration facility with main fire alarm panel for voice evacuation complete as required. 147 supplying , installation , Testing & commissioning of 1.5/3/6Wceiling/wall speakers complete as required. 148 CABLING & WIRING 149 supplying & laying of 2* 1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. 150 supplying & drawing of cable fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steelconduit of following pairs, cores and size including connections and interconnections etc. as required speaker cable Two pair, 2-core , 1.5 sqmm 151 Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required 152 Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. 153 Supply and fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. 154 Supply, Installation testing and commissioning of Ceiling mounted automatic fire extinguisher (Dry Chemical powder) of 10KG capacity including all fitting and accessories as per dwg and spec as complete required. 155 Supply,Installation, Testing & Commissioning of 3 Nos. G.I. sand buckets painted Red Color complete with suitable size G.I. stand duly painted Red Color of suitable size to hang 3 Buckets at a time as per required specifications. 156 CCTV SURVELLANCE SYSTEM 157 Supply, Installation, Testing and Commissioning of fixed Camers, 2 MP, 1/2.7 CMOS image sensor, low illuminance 2 MP (1920 x 1080) @ 25/30 FPS Output H 265 codec, IR LED 30m, DWDR, 3D NR HLX BLC digital watermarking, Abnormally detection: Motion detection, video tampering, 12 V DC/PoE power supply Network TDN IR Indoor/Outdoor complete 158 Supply, Installation, Testing and Commissioning of 32 channel NVR with Embedded enterprises grade linux processor, rel time time H.265 Security baseline 2.1, 1080p@30 fps adaptive decoding, ONVIF and RTSP protocols, resolution HDMI 4K, AI Face detection, perimeter protection, IVS, people counting, heat map, and SMD, BW 160 Mbps, Audio PCM/G711A/G726/ AAC, privacy masking, video loss, scene changing, PIR alarm, SATA III port up to 10 TB. Make Dahua/HikVision 159 Supply, Installation, testing and commissioning of 6TB SATA Internal with 1M hours MTBF, 180 TB workload rate, write-intensive, low bit-rate, high stream-count, prioritized write-op. Make - WD/Seagate 160 Supply, Installation, testing and commissioning of HDBaseT Hdmi Extender Make - Milestone 161 Supply, Installation, testing and commissioning of wall mountable 55 high resolution LED monitor with HDMI port and commercial series suitable for 12x7 operation. All accessories for installation including wall mounting stand/ bracket. Make - Samsung/Sony 162 TOILET WORK 163 Providing and fixing of Soap Dispenser as per the approveddesign all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent 164 Supply&Fixingofwindowsmadefrommulti chambered UPVC profiles of minimum 60/108 mm thicknessof (Wintechmakeorequivalent)in natural from stailized for heat, light, impact & UV radiation. The UPVC profiles should be reinforced withgalzvanizedsteelprofilesofdesigned thickness.Floatglassofapprovedcolourin 4/5/6/8 mm or as desired by the costumer shall be fixed with heveled beads. All openable / sliding sashes shall be having grey/black colored weather seal fitted in continuous lenghts made from bubble PTV Rubber & side Hung with 90L openin friction syats of rust proof stainless steel with provision of multipoint lockng system (casement only) made from Espag rods (coated steel) all handle shall be made from die Cast zinc alloy in white finish only as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 165 Providing & Fixing of Translucent Zebra Blinds with Hand Rail of approved shade as per drawing & specificationas approved by Engineer -in-Charge. 166 Providing, fabricating & placing single leaf single swing aluminium stile door with 12mm thick toughened glass & stile size of 40mm x 90mm. The door frame of size 70 x 50mm shall be formed with heavy duty aluminium door, fixed to dry wall partition. Rate to include providing & fixing of Geze make standard stainless steel brush finished hardwares Hinges: flush door hinge -Geze-. Finis: Std finish Handle & lock: lever handle & Mortise lock set with both side key cylinder- Geze, Door Closer: Exposed door closer TS 3000V - Asymatric Rack and Pinion Door Closer with hold-open slide arm Closing force: 1-4 (adjustable) Tested according to EN 1154 for door width upto: 1100mm Door stopper: Half moon door stop Finish of profile- Black finish System - Micra I door Make - Liko-s 167 Providing & Fixing of Photo Frames Having Size (500WX650HT) of Invest UP in Coloured Canvas Printswith wooden frame borders & glasscomplete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 168 Providing & Fixing of Photo Frames Having Size (700WX400HT) of Invest UP in Coloured Canvas Printswith wooden frame borders & glasscomplete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 169 Providing & Fixing of Photo Frames Having Size (650WX650HT) of Invest UP in Coloured Canvas Printswith wooden frame borders & glasscomplete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 170 Providing & Fixing of Photo Frames Having Size (1175WX650HT) of Invest UP in Coloured Canvas Printswith wooden frame borders & glasscomplete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 171 Providing & Fixing of Photo Frames Having Size (1250WX775HT) of Invest UP in Coloured Canvas Printswith wooden frame borders & glasscomplete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 172 Providing & Fixing of Round Shape Polmer Planter of Size (375DIA X 375HT) With Thermocol Packing & Double Layer of Pabbles With Artificial 36Plants of approved shade as per drawing & specificationas approved by Engineer -in-Charge.MR 173 Providing & Fixing of Square Shape Polmer Planter of Size (375Wx375Dx400HT) With Thermocol Packing & Double Layer of Pabbles With Artificial 36Plants of approved shade as per drawing & specificationas approved by Engineer -in-Charge.MR 174 Providing & Fixing of Rectangular Shape Polmer Planter of Size (600Wx325Dx375HT) With Thermocol Packing & Double Layer of Pabbles With Artificial 36Plants of approved shade as per drawing & specificationas approved by Engineer -in-Charge.MR 175 Providing & Fixing of Wooden Planter OF Size (1800L X 600W x 600HT) With Thermocol Packing & Double Layer of Pabbles With 55Nos Artificial Bamboo 60 Plants of approved shade as per drawing & specificationas approved by Engineer -in-Charge.MR 176 Providing & Fixing of Artificial Small Plants Inside Existing Wooden Planter of Size (900L X 450W x 150HT) With Thermocol Packing & Double Layer of Pabbles of approved shade as per drawing & specificationas approved by Engineer -in-Charge.MR 177 Providing & Fixing of Signages of Size (8 x 8) Made of Side Moulded Signages made with Premium Laminate & Acrylic Laser Cut Letters as per deisgn & Multi Layering with Wooden Finish as base of Male, Female Toilet & Pantry, complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 178 Providing & Fixing of Signages of Size (47 x 14) Made of Multi Layered Signage made with 5mm & 3mm Thick Acrylic & UV Prints on Base Acrylic & Acrylic Letters of INVEST UP LOGO, complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 179 ELECTRICAL WORK 180 S&F of 63 Amp. TP MCB (10 KA) C Curve S.I.(1017) 181 S&F of 63 Amp. DP MCB (10 KA) S.I.(1011) 182 S&F surface/flush mounting 8ways SPN distribution board with additional metal door without MCB complete in all respect, as directed by Engineer in charge. S.I.(1024A) 183 S&F of 160 Amp 4 pole MCCB (25 KA) Thermal Magnetic release S.I.(1021E) 184 S&F surface/flush mounting 16ways SPN distribution board with additional metal door without MCB complete in all respect, as directed by Engineer in charge. Make-Legrand MR 185 Supply and Fixing of Deep Recess Mounting round 12.5 Watt COB LED Spot Light having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. Make-Ledos MR 186 Supply & Fixing of 50X70MM Black Body 4000K Customized LED Profile Hanging Light with LED Modules & Inbuilt Driver all complete as per drawing and specification and direction of engineer incharge. Make-Customized MR 187 Supply & Fixing of 150MM Inline Mixflow Fresh Air Fan all complete as per drawing and specification and direction of engineer incharge. Make-Rexton Grand-6 MR 188 Supply & Fixing of 150MM Gravity Grill For Inline Mixflow Fresh Air Fan all complete as per drawing and specification and direction of engineer incharge. Make-Rexton Gravity Grill-6 MR 189 Supply & Fixing of 150MM Air Valve For Inline Mixflow Fresh Air Fan all complete as per drawing and specification and direction of engineer incharge. Make-Rexton CAV-6 MR 190 Providing & Fixing of 13Watt LED Surface COB Light In Black Colour all complete as per drawing and specification and direction of engineer incharge. Make-Ledadvance MR 191 INTERIOR WORK 192 Providing & Fixing of Translucent Zebra Blinds with Hand Rail of approved shade as per drawing & specificationas approved by Engineer -in-Charge. 193 Providing & Fixing of Mat Roman Wooden Chick Blinds with Hand Rail of approved shade as per drawing & specificationas approved by Engineer -in-Charge. 194 Providing, fabricating & placing single leaf single swing aluminium stile door with 12mm thick toughened glass & stile size of 40mm x 90mm. The door frame of size 70 x 50mm shall be formed with heavy duty aluminium door, fixed to dry wall partition. Rate to include providing & fixing of Geze make standard stainless steel brush finished hardwares Hinges: flush door hinge -Geze-. Finis: Std finish Handle & lock: lever handle & Mortise lock set with both side key cylinder- Geze, Door Closer: Exposed door closer TS 3000V - Asymatric Rack and Pinion Door Closer with hold-open slide arm Closing force: 1-4 (adjustable) Tested according to EN 1154 for door width upto: 1100mm Door stopper: Half moon door stop Finish of profile- Black finish System - Micra I door Make - Liko-s 195 Providing & Fixing of Square Shape Polmer Planter of Size (375Wx375Dx400HT) With Thermocol Packing & Double Layer of Pabbles With Artificial 36Plants of approved shade as per drawing & specificationas approved by Engineer -in-Charge.MR 196 Providing & Fixing of Round Shape Polmer Planter of Size (375DIA X 375HT) With Thermocol Packing & Double Layer of Pabbles With Artificial 36Plants of approved shade as per drawing & specificationas approved by Engineer -in-Charge.MR 197 Providing & Fixing of Rectangular Shape Polmer Planter of Size (600Wx325Dx375HT) With Thermocol Packing & Double Layer of Pabbles With Artificial 36Plants of approved shade as per drawing & specificationas approved by Engineer -in-Charge.MR 198 Providing & Fixing of Oval Shape Polmer Planter of Size (325DIA X 500HT) With Thermocol Packing & Double Layer of Pabbles With Artificial 36Plants of approved shade as per drawing & specificationas approved by Engineer -in-Charge.MR 199 Providing & Fixing of Oval Shape Polmer Tower Planter of Size (200DIA X 600HT) With Thermocol Packing & Double Layer of Pabbles With Artificial 36Plants of approved shade as per drawing & specificationas approved by Engineer -in-Charge.MR 200 Providing & Fixing of Oval Shape Ceramic Tower Planter of Size (200DIA X 600HT) With Thermocol Packing & Double Layer of Pabbles With Artificial 60Plants of approved shade as per drawing & specificationas approved by Engineer -in-Charge.MR 201 Providing & Fixing of Artificial Vertical Garden Having Natural Look Like Grass of approved shade as per drawing & specificationas approved by Engineer -in-Charge.MR 202 Providing & Fixing of Photo Frames Having Size (1200WX450HT) of Varanasi Picture in Coloured Canvas Printswith wooden frame borders & Non Reflective glasscomplete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 203 Providing & Fixing of Photo Frames Having Size (600WX900HT) of Picture in Coloured Canvas Printswith wooden frame borders & Non Reflective glasscomplete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 204 Providing & Fixing of Photo Frames Having Size (1200WX750HT) of Varanasi Picture in Coloured Canvas Printswith wooden frame borders & Non Reflective glasscomplete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 205 Providing & Fixing of Photo Frames Having Size (500WX375HT) of Varanasi Picture in Coloured Canvas Printswith wooden frame borders & Non Reflective glasscomplete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 206 Providing & Fixing of Photo Frames Having Size (600WX600HT) of Uttar Pradesh Sarkar in Black & White/Coloured Canvas Printswith wooden frame borders & Non Reflective glasscomplete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 207 Providing & Fixing of Photo Frames Having Size (650WX650HT) of Uttar Pradesh Sarkar in Black & White/Coloured Canvas Printswith wooden frame borders & Non Reflective glasscomplete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 208 Providing & Fixing of Photo Frames Having Size (400WX400HT) of Shri Ram Mandirin Black & White Canvas Printswith wooden frame borders & Non Reflective glasscomplete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 209 Providing & Fixing of Photo Frames Having Size (725WX725HT) of Sandwitched Flower in Colour Canvas Printswith wooden frame borders & Non Reflective glasscomplete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 210 Providing & Fixing of Photo Frames Having Size (475WX1200HT) of Invest UP in Colour Canvas Printswith wooden frame borders & Non Reflective glasscomplete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 211 Providing & Fixing of Photo Frames Having Size (450WX600HT) of Invest UP in Colour Canvas Printswith wooden frame borders & Non Reflective glasscomplete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 212 Providing & Fixing of Photo Frames Having Size (400WX600HT) of Invest UP in Colour Canvas Printswith wooden frame borders & Non Reflective glasscomplete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 213 Providing & Fixing of Signages of Size (1500 x 188)MM Made of 12mm Corian CNC Cut Letters & Fixed on Existing Wall Surface of INVEST UP, complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 214 Providing & Fixing of Signages of Size (1175 x 350)MM Made of Multi Layered Signage made with 5mm & 3mm Thick Acrylic & UV Prints on Base Acrylic & Acrylic Letters of INVEST UP LOGO, complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 215 Providing & Fixing of Signages of Size (200 x 200)MM Made of Side Moulded Signages made with Premium Laminate & Acrylic Laser Cut Letters as per deisgn & Multi Layering with Wooden Finish as base of Male, Female Toilet & Pantry, complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 216 Providing & Fixing of Signages of Size (450 x 200)MM Made of Side Moulded Signages made with Premium Laminate & Acrylic Laser Cut Letters as per deisgn & Multi Layering with Wooden Finish as base of Conference Hall, complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 217 Providing & Fixing of Signages of Size (2400 x 1200)MM Made of UV Prints on Lacquered Glass with Pre Coat & 3 Layer Prinitng of Invest UP Logo, complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 218 Providing & Fixing of Signages of Size (975 x 700)MM Made of HP Latex Prints on Vinyl duly matt laminated & mounted on 5mm Sunboard of Invest UP Logo, complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 219 Providing & Fixing of Signages of Size (350 x 200)MM Made of 3 Layer Name Plates made with Black Acrylic as base & UV Prints on Clear Acrylic as 2nd Layer & 3rd Layer being Acrylic Letters of IIDC, CEO & ACEO Room, complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 220 Providing & Fixing of Signages of Size (875 x 875)MM Made of 6mm Clear Acrylic Laser Cut with UV Prints from Back Side & Heavy White Ink as base & fixed with Spacers, complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 221 Providing & Fixing of Signages of Size (1200 x 600)MM Made of 3D Embossed Acrylic Letters with Multi Layering made with Acrylic & ACP & UV Prints of Invest UP Logo, complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 222 Providing & Fixing of Signages of Size (600 x 150)MM Made of UV Prints on Clear Acrylic Sheet 3mm Black Acrylic Laser Cut Letters Invest UP, complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 223 Providing & Fixing of Signages of Size (600 x 75)MM Made of UV Prints on Clear Acrylic Sheet 3mm Black Acrylic Laser Cut Letters 2nd, 4rth & 6th Floor, complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 224 Providing & Fixing of Signages of Size (12000 x 2400)MM Made of Temporary MS Frame with Black Back Flex Prints of Invest-UP complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 225 Providing & Fixing of Signages of Size (10200 x 2400)MM Made of MS Structure with Black Back Flex Prints mounted on Water Tank Wall with back MS Supports, complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge. 226 ELECTRICAL WORK 227 S&F of 63 Amp. TP MCB (10 KA) C Curve S.I.(1017) 228 S&F of 63 Amp. DP MCB (10 KA) S.I.(1011) 229 S&F of 63 Amp 4 pole MCCB (25 KA) Thermal Magnetic release MR 230 Supply & Fixing of 150MM Inline Mixflow Fresh Air Fan all complete as per drawing and specification and direction of engineer incharge. Make-Rexton Grand-6 MR 231 Supply & Fixing of 150MM Gravity Grill For Inline Mixflow Fresh Air Fan all complete as per drawing and specification and direction of engineer incharge. Make-Rexton Gravity Grill-6 MR 232 Supply & Fixing of 150MM Air Valve For Inline Mixflow Fresh Air Fan all complete as per drawing and specification and direction of engineer incharge. Make-Rexton CAV-6 MR 233 Supply & Fixing of 110MM Ceiling Mount Fresh Air Fan all complete as per drawing and specification and direction of engineer incharge. Make-Crompton MR 234 Providing & Fixing of 5KVA Online UPS Having 12V/26AH 15Nos Batteries & Battery Stand all complete as per drawing and specification and direction of engineer incharge. Make-Aeon MR 235 Providing & Fixing of Call Bell Chimes all complete as per drawing and specification and direction of engineer incharge. Make-L&T MR 236 Providing & Fixing of 1800MM Linear Hanging LED Light all complete as per drawing and specification and direction of engineer incharge. Make-Ledlum MR 237 Providing & Fixing of 2400MM Linear Hanging LED Light all complete as per drawing and specification and direction of engineer incharge. Make-Ledlum MR 238 Providing & Fixing of 1200MM Designer Hanging LED Light all complete as per drawing and specification and direction of engineer incharge. Make-Ledlum MR 239 Providing & Fixing of 900MM Dia & 300MM Ht Cloth Hanging Fitted with 10Nos LED Candle Light having 3 Colour Change all complete as per drawing and specification and direction of engineer incharge. Make-Ledadvace MR 240 Providing & Fixing of 9Watt LED Surface COB Light In Black Colour all complete as per drawing and specification and direction of engineer incharge. Make-Ledadvance MR 241 AIR CONDITIONING WORK 242 Supply, Installation, Testing & Commissioning of Hi-Wall Cool Type Unit- 0.80 TR + Cordless Remote, Model-FTHT35TV16X + RHTall complete as per drawing, specification and directionas approved by Engineer -in-Charge. 243 Supply, Installation, Testing & Commissioning of Hi-Wall Hot & Cool Type Unit- 1.0 TR + Cordless Remote, Model-FTHT35TV16X + RHTall complete as per drawing, specification and directionas approved by Engineer -in-Charge. 244 Supply & Fixing of Outdoor Stand all complete as per drawing, specification and directionas approved by Engineer -in-Charge. 245 Supply, Installation, Testing & Commissioning of One Way Cassette Type Unit- 2.08TR + Corded Remote + Refnet, Model FXKQ63AV16all complete as per drawing, specification and directionas approved by Engineer -in-Charge. 246 PA SYSTEM WORK 247 Supply, Installation, testing and commissioning of DSP, studio-grade discrete preamps, 24bit Processor, 4 mic/line inputs with AEC, built-in usb for conferencing. Make - Clearone 248 VIDEO CONFERENCING SYSTEM WORK 249 Supply, Installation, testing and commissioning of professional-grade PTZ camera with 20x optical zoom lens, H.264/H.265 streaming, USB network, RS485 and RS232 interfaces to control and 1080p60 HDMI video Make - Clearone 250 Supply, Installation, testing and commissioning of 2x8 Presentation Switcher HDMI Matrix. Make - Milestone 251 Supply, Installation, testing and commissioning of 1X4 Presentation Switcher HDMI Matrix. Make - Milestone 252 Supply, Installation, testing and commissioning of Ipad Docking Case with charging port accessory for Iport Base Station. Make - Iport 253 Supply, Installation, testing and commissioning of 1X4 USB Hub Matrix. Make - Quantum 254 Supply, Installation, testing and commissioning of TPC-IPAD Controller App License. Make - AMX 255 IP TELEPHONE SYSTEM WORK 256 Supply, Installation, testing and commissioning of Enterprise Portable WiFi sip Phone, Unified Firmware, extended battery. Make - Grandstream 257 TOILET WORK 258 Providing and fixing of Wash Basin With Half Pedestal as per the approveddesign all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent 259 GST Extra as applicable
