Tender For Up-Gradation Work Of Tourism And Cultural Office At Collectorate Council In District-Firozabad, 1 Providing & fixing solid 3.0 m height panneling in frame work of 750 x 750 mm (horizontally and vertically) comprosong of 50x50 mm thicksoft wood sction with 12 mm thick plywood finished with 1 mm laminate over 6 mm plywood of matching laminate colour. All complete in direction of Architect/Engineer in charge. 2 Providing and Fixing of Acoustical Wall Panel with square edges made of fibre glass substrate 25mm thick, wrapped on the front side with an acoustically transparent fabric as per the approved shade (Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell). The panel shall be classified for Fire Class A, as per ASTM E-84. The Acoustical Wall Panel shall be of sizes 600x600mm (Nominal) or 600x1200mm (Nominal) and shall achieve an NRC of 0.85 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) with 50mm airgap as per ASTM C423 to be fixed to wall on a framework of wooden battens and using Wall panel Impalers (supplied by the manufacturer) or by using construction adhesives (as per the instructions laid down by the manufacturer). The wall panel shall be backed by a Manufacturing Test Certificate. The fibre glass substrate shall have a recycle content of 85%. 3 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mmthick 27 mm high having flanges of 20 mm and 30 mm long, theperimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills,diffusers, cutouts made with frame of perimeter channels suitablyfixed, all complete as per drawings, specification and direction ofthe Engineer in Charge but excluding the cost of painting with12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) 4 Finishing walls with 100% Premium acrylic emulsion paint having VOC loss than 50 gm/litre and UV resistence as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Trnted) with silicon additives. New work (Tow or more coats applies @ 1.43 litre 10 sqm Over and including priming coat of exterior primer applied @0.90 litre/10sqm 5 Providing and fixing 12mm thick frameless toughened glassdoor shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer in charge (Door handle, lock and stopper etc. to be paid separately) 6 Brick work with (non modular) bricks of class 150 in superstructure above plinth level upto floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 course sand) 7 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in grith and finished even and smooth no extra for mixing any additive. (1)1 cement : 6 coarse sand (a) Providing and fixing water proofing materials in cement mortar for plastring or in concrete work in the proportion recommended by the manufacturer. 8 Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10sqm 9 Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete 10 Providing and supply ofHigh Back chair,Mettalic PP Cushion Arm , Torsion Bar , Gas Lift , Metallic Powder Coated Metal Base,Leatherlite Tapestry (Geeken/ Featherlite/Modern or Equivalent) (GP 109) etc all complete in direction of Architect / Engineer in charge. 11 Providing and supply of Medium Back Chair, Injection Moulded Back, Mesh back, PP Arm,Swivel Tilt, Gas Lift, Nylon Base, Seat Cushion Fabric Tapestry & Cover (DERBY 2) etc all complete in direction of Architect / Engineer in charge. 12 Providing and supply of Visitor ChairMesh back, PP Arm,Swivel Tilt, Gas Lift, Nylon Base, Seat Cushion Fabric Tapestry & Cover (GA 550A) etc all complete in direction of Architect / Engineer in charge. 13 Providing and supply of 2 Seater Sofa With Wooden Frame, Chrome Plated Leg, Fabric Tapestry ,Size in mm - 1860 (L) X 760 (D) X 760 (H)(Geeken/ Featherlite or Equivalent-ROSEMOUNT 2 /Modern or Equivalent) 14 Providing and supply of 3 Seater Sofa With Wooden Frame, Chrome Plated Leg, Fabric Tapestry ,Size in mm - - 2400 (L) X 760 (D) X 760 (H)(Geeken/ Featherlite or Equivalent-ROSEMOUNT 3 /Modern or Equivalent) 15 Providing of 1200X600 MM Central Table , SS Pipe Frame Chrome Finish , PLPB Edge Banded Top , 18mm Thick , marino 10858 Colour (ADMIRE) (haffele/Doorset or equivalent) as per direction of Architect in charge . 16 Providing of 600X600 Corner Table 15mm PLPB Top, Annodize Aluminium Section frame (12500) (haffele/Doorset or equivalent/ Modern) as per direction of Architect in charge . 17 P & F of laser cut corian logo on rear wall with back lighting (1M X 1 M) etc all complete in direction of Architect / Engineer in charge. 18 Providing and Installation of Vertical Blinds in wiindows all complete in direction of Architect / Engineer in charge. 19 Providing and Installation of Acrylic Signage with lettering and Backlit in Exterior wall all complete in direction of Architect / Engineer in charge. 20 Providing and Installation of storage rack 900X450X2100 with wooden storage, particel and MDG structure and side glass door as per direction of Architect in charge, (GEEKEN storage 10/ haffele/Doorset or equivalent/ Modern) 21 Providing and Installation of storage rack/pigeon hole 900x450x750 with pigeon hol, particel and MDG structure as per direction of Architect in charge, (STORAGE 6 / Featherlite/Modern or Equivalent) 22 Providing and Installation of Conference Table, Particle board and MDF top,(Without Flip-Up Box) W4500 X D1500 X H750etc all complete in direction of architect in charge. CONFERENCE 5 MEBMRANE MODULAR CONFERENCE TABLE (Geeken/ Featherlite/Modern or Equivalent) 23 Providing ofExecutive Table, PLPB Top or Flaper Box, Extruded aluminium Profile W1800XD1750X750 as per direction of Architect in charge .(Geeken/ Featherlite/Modern or Equivalent) (Evoke) 24 Providing ofExecutive Table, PLPB Top or Flaper Box, Extruded aluminium Profile W1800XD1750X750 as per direction of Architect in charge .(Geeken/ Featherlite/Modern or Equivalent) (NUMERO 6) 25 Providing ofExecutive Table, PLPB Top or Flaper Box, Extruded aluminium Profile W1800XD1750X750 as per direction of Architect in charge .(Geeken/ Featherlite/Modern or Equivalent) (NUMERO 7) 26 Supply Installation Testing & Commisionning of Passive 2 way bass reflex,TRANSDUCER COMPLEMENTS: LF 1 x 4 woofer POWER TAPS 100V - 2.5W, 5W, 10W, 20W (Make -Bose , Sonodyne , Bosch ) 27 Supply Installation Testing & Commisionning of Mixer Amplifiers, now featuring 2 channels of priority VOX muting, integrated tone generator, OUTPUT POWER PER CHANNEL -250 watt, FREQUENCY RESPONSE - 40Hz - 20kHz, OUTPUT MODE - 4 Ohm- 100V , THD+N < 0.2%, INPUT CHANNELS - 4 MIC or Line, SIGNAL TO NOISE RATIO > 80dB, INPUT SENSITIVITY -MIC: 1.2mV - Line: 160mV (Make - Bose , Sonodyne , Bosch) 28 Mixer & MicrophoneSupply Installation Testing & Commisionning of 6 channel mixer (Make - Yamaha , Sonodyne , JBL ) 29 Supply Installation Testing & Commisionning of Sonodyne wireless microphones dual channel with one hand held & one lapel mike , carrier freq range 865-867MHz, S/N ratio > 105dB, Freq response 40 to 18000 Hz, sensitivity-105dB, working distance > 150 feet (Make - Shure , Sonodyne , Bosch ) 30 Supply Installation Testing & Commisionning ofBosch Gooseneck microphone condenser type unidirectional with flexible stem, phantom powered, voltage range 12- 48 Volts, sensitivity 2.5 mV/pascal, Freq 100 to 16000 Hz, output impedance < 200 Ohms. With Ahuja small stand Range(250ft) in optimal conditions Modultion : GFSK with TDMA, voltage 3.7 . (Make - Shure , Sonodyne , Bosch ) 31 Cables & Accessoories :-Supply Installation Testing & Commisionning of 2 core sheilded microphone wire. MICROPHONE CABLE 2 CORE +SHIELDED 19/0.12 OFC+ PVC 2C + COTTON YARN 06 MM (Make - Crystal , felcon , belden 32 Supply Installation Testing & Commisionning of 2 core x 1.5 sq mm speaker wire (Make - oxycraft , felcon , delden ) 33 Supply Installation Testing & Commisionning Misc Connectors , Microphone Connectors Boxes , Patch cables for entire installation 34 Supply Installation Testing & Commisionning of 18U Equipment for backend system for Equipment Rack (Make - Comrack , Valrack , Legrand ) 35 Video Projection System :-Supply Installation Testing & Commisionning of Laser Projector,WUXGA resolution (1,920x1,200) , 5000 ANSI Lumenns ,Contrast Ratio 3,000,000:1, Zoom , Focus &Lens Shift , (Make - Sony , Epson , LG ) 36 Supply, Installation testing & commissioning of 150 diagonal motorized screen with aspect ratio of 16:9, complete with all standard accessories as per the tender specification (Make - Liberty , Suvira , Prima ) 37 Supply Installation Testing & Commisionning of HDMI PLATE 38 Supply Installation Testing & Commisionning of HDMI Switch (2x1) (Make - Aten , Milestone , Kramer ) 39 Supply Installation Testing & Commisionning of HDMI WIRE ( 1 M) 40 Supply Installation Testing & Commisionning of HDMI WIRE ( 5 M) 41 Supply Installation Testing & Commisionning of HDMI WIRE ( 15 M) 42 Supply Installation Testing & Commisionning of Audio Embader (Make - Aten , Milestone , Kramer ) 43 Supply Installation Testing & Commisionning of Projector Lift (Make - Liberty , Suvira , Prima ) 44 ELECTRICALWiring point for light with 1.5 sq.mmFRLSH PVC insulated multistrand single core copper conductorcable in PVC conduit pipe Partly concealed in the wall and partly Laid in slab along with the reinforcement before concreting,complete with 1.5sqmm. FRLSH PVC insulated multistrand single core copper conductorcable as earth continuity wire , GP box, piano type switch & ceiling rose /angle/batten holder on 3mm thick , phenolic laminated backalite sheet etc.complete in all respect as directed including matching colour wash. 45 Wiring point for plug with 1.5 sq.mmFRLSH PVC insulated multistrand single core copper conductorcable in PVC conduit pipe Partly concealed in the wall and partly Laid in slabalong with the reinforcement before concreting ,complete with 1.5sqmm. FRLSH PVC insulated multistrand single core copper conductorcable as earth continuity wire , GP box, piano type switch & socket etc.complete in all respect, as directed, including matching colour wash. 46 Supply fixing & concealing ofPVC conduit in the wall including cutting of brick laying of conduit & fixing it with MS hooks & then plastering.with cement, sand,mortar finished to the level,with matching colour wash including cost of proper thrading of conduit and providing necessary socket ,bend & chucknuts,as directed by engineer incharge with the supply ofmaterial labour and T&P required for proper completion of work. Size 20 mm dia(2 mm) thick PVC Conduit 47 Wiring point for plug point with 5 Amp flush type switch and 3 pin socket and earth continuity wire of 1.5 sq.mm. FRLSH PVC insulated multi strand copper conductor cable. (drawn through existing concealed PVC conduit) and ceiling rose/angle/batten holder fixed with 3mm thick phenolic laminated backalite sheet with brass machine screws and cup washers mounted over existing M.S. switch board box/ junction box with supply of all material, labour & T&P etc. required for proper completion of the work as directed at site by the Engineer in charge. 48 Add for light /fan point with moduler type switch in place of piano type switch. 49 Add for plug point with moduler type switch in place of piano type switch. 50 Supply & wiring of submains with 2 nos.2.5 sq.mmFRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC conduit partly concealed in wall and partly laid in slabalong with the reinforcement before concreting, with1 no. 1.5 sqmm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire including matching colour wash etc.complete in all respect. 51 Supply & wiring of submains with 2 nos.4 sq.mmFRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, with 1 no. 2.5 sqmm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire including matching colour wash etc.complete in all respect. 52 Supply & wiring of submains with 2 nos.6 sq.mmFRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting, with 1 no. 4 sqmm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire including matching colour wash etc.complete in all respect. 53 Supply & fixing of recess mounting round 15 to 18 watt LED down Lighter having Powder coated die cast aluminium housing with heat sink , diffuser /reflector and driver set complete in all respect. 54 Aesthetically designed LED linear fixture suitable for suspended down type with housing made of high quality extruded aluminium alloy including die-cast aluminium end cap. These series are also available with seamless continuous lighting system ensuring no visible dark spot or light leakages(Philips/Havells/Panasonic) as per design approved by architect incharge. 55 Supply and Installation of 5M LED Strip of 24W Output with 20000 hours and 3000K & 6500K(LED STRIP SKYCOVE 5M CDL WITH DRIVER) 56 Supply of ceilling fans with fan motor of A.C. Permanent insulation, capacitor rating conforming BEE 5 Star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volts,50 Hz, 1-Ph AC the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system.BEE 5 Star rated-1200 mm sweep 57 Supplying, erection, connecting, testing and commissioning of 450 mm Wall Fancomplete in all respect. 58 Supply and fixing of 40 Amp. TP MCB (10 KA) C Curve. 59 Supply and fixing of 63 Amp. TP MCB (10 KA) C Curve. 60 Supply and fixing of surface/Flush mounting 6 ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. 61 Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects. 62 Supply and fixing of power plug with 20A/250V flush type Moduler switch and 5 Pin 20A/250V flush type universal Moduler socket in suitable Conceled MS Box including supply of all material, labour,T&P etc.required for proper completion of work. 63 Supplyfixingofelectronic fan regulator (Modular) 120-280 V. ISImarked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work. 64 G.S.T Extra as per applicable
