|
| 1 | Taking down existing water proofing treatment of any thickness from the roof including cement mortar bedding , PCC tiles, padding concrete if any,up to the RCC slab,removing debris off the premises and cleaning the roof complete all as specified and as directed. |
| 2 | Cutting the V grooves on the terrace slab where ever cracks are observed and fill the grooves with Fosroc heavy duty non shrink grout Convextra GP2 , coving all the 90 degree angles , slab/wall junctions with Conbextra GP2 all as per manufacturer\"s instruction all as specified and as directed. |
| 3 | M&L providing a levelling course of cement concrete type B-0, 1:2:4, using 12.50 mm stoneaggregate,40 mm thickmaintains a slope towards the drain water pipes by adding a water proof admixture @ 250 ml per bag of cement all as specified and as directed.Note :-Admixture shall be measured and paid separately. |
| 4 | M&L for rendering plaster with CM 1:3, 10 mm thick mixed with water proofing admixture of Fosroc/Pidilite or equivalent , all as specified and as directed.Note :-Admixture shall be measured and paid separately. |
| 5 | M&L for applying oil based bitumen primer @ 0.25 kg/sqm, providing and laying 4 mm thick APP modified water proofing membrane weighing not less than 4kg/sqmhaving softening point not less than 140 degrees C, longitudinal tensile strength not less than 650 N/Sqcm, tearing strength of 180 N by torch application including min 10 cm side over lap and 15cm end lap, applying a coat of blown grade hot bitumen 85/25 over membrane @ 1.2 kg/sqm and finishing the surface with solar reflective bituminous aluminium paint @ 10 Kg /Sqm all as specified and as directed. |
| 6 | Supply only liquidwater proofing admixture, all as specified and as directed. |
| 7 | M&L for chip and remove all damaged and de bonded concrete and plaster from the RCC slabs by manually or mechanically so as to expose the corroded reinforcement bars, removingthe debris with in a lead of 100 meters as directed by Engineer-in-charge. |
| 8 | M&L for supply and application of Nitobond EP (Manufactured by M/s Fosroc chemicals India Ltd) epoxy bonding agent over the old concrete surface complete all as specified and all as directed by Engineer-in-charge. |
| 9 | M&L for supply and application of rust remover/converter (Rebaklense RR of M/s Fosroc Chemicals India Ltd. or equivalent) or Amandur ,(manufactured by GK technocom) over the corroded reinforcement bar where ever micro concreting is required and cleaning the same after application complete all as directed by Engineer-in-charge. |
| 10 | M&L for plastering with Nitobond SBR (Styrene butadin polymer bonding agent cum cement mortar/concrete modifier Manufactured by M/s Fosroc Chemicals India Ltdor equivalent) modified cement mortar (1:4) under the slab to an average thickness of 40 mm (applied in two layers not exceeding 20mm each) , including the cost of all materials rent of tools and labour charges etc complete all as directed by Engr-in-charge. |
| 11 | M&L for Providing additional reinforcement bars in place of more than 1/3 corroded reinforcement bars including the charges for cutting , bending, placing and fixing in position using Lok-Fix (Manufactured by M/s Fosroc Chemicals India Ltdor equivalent)complete Including the cost of steel bars. Complete all as directed by Engineer-in-charge. |
| 12 | M&L for providing and fixing of shear connectors of 8 mm dia inside 12 mm dia holes at 50 mm deep @ 500 mm C/C after cleaning the holes to remove the dust particles and fixing the shear connectors using Lokfix S ( Manufactured by M/s Fosroc chemicals India Ltdor equivalent) polyester resin anchor grout complete all as specified and directed by Engineer-in-charge. |
| 13 | Demolition of reinforced concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work all as specified and as directed. |
| 14 | Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pilasters, buttresses, etc.; vertical or to batter rough finished all as specified. |
| 15 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished all as specified. |
| 16 | Formwork to sides and soffits of floor or roof beams, beam hauntings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished all as specified. |
| 17 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished all as specified |
| 18 | M&L TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified. |
| 19 | ‘-Ditto-all as per item No 18but 6mm to 8mm dia for stirrupsall as specified and as directed. |
| 20 | M&L for RCC M30 design mix 20mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likeall as specified and as directed. |
| 21 | M&L for RCC M30 design mix 20mm graded aggregate in Columns, pillars, piers, posts and strutsall as specified and as directed. |
| 22 | M&L for RCC M30 design mix 20mm graded aggregate inBeams, cantilevers, bressummers, lintels over 1.5m spanall as specified and as directed. |
| 23 | M&L for RCC M30 design mix 20mm graded aggregate in Fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade, and the likeall as specified and as directed. |
| 24 | Taking down cement plaster of any description on walls including raking out joints, hacking for key scrubbing down with waterall as specified and as directed. |
| 25 | M&L for rendering plaster 15 mm thick in two coats (10 mm thick in cement mortar 1:4 and 5 mm thick in cement mortar 1:4) mixed withwater proofing compound) on other than fair faces of exterior brick work or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.(Note- water proofing compound shall be measured and paid separately) . |
| 26 | M&L for plastering in CM1:6, 10 mm thick on interior walls finished even and smooth w/o using extra cement all as specified and as directed. |
| 27 | M&L for 5mm thick plasteringin CM 1:3on ceiling finished even and smooth w/o using extra cement all as specified and as directed. |
| 28 | M&L for preparation ofold externalwall surfaces of wall byscrapping , washing , rubbing down and stopping of surfaces of wallcomplete all as specified. |
| 29 | M&L for two coats of Antifungal paint (Apex ultima Protek of Asian paint or Equivalent in approved Makes) over a coat of Exterior primer (Professional pack of Asian paints) over a coat of external wall care putty n.exc 2 mm thick on new or old prepared plastered external surfacesall as specified and as directed. Note : Height of the Bldg- G+3. |
| 30 | M&L preparation of newly plastered internal wall and applying two coats of distemper oil emulsion on wall over a coat of primer, plastered and other surfaces with alkali resistant priming paint completeall as specified and as directed. |
| 31 | M&L preparation of old internal wall and applying two coats of distemper oil emulsion on wall over a coat of primer, plastered and other surfaces with alkali resistant priming paint completeall as specified and as directed. |
| 32 | M&L preparation of oldsurfaces of ceiling by complete removal of existing treatment , and applying two coats of distemper oil emulsion on ceiling over a coat of primer, plastered and other surfaces with alkali resistant priming paint completeall as specified and as directed. |
| 33 | M&L preparation of newsurfaces of ceiling, and applying two coats of distemper oil emulsion on ceiling over a coat of primer, plastered and other surfaces with alkali resistant priming paint complete all as specified and as directed. |
| 34 | Dismantling in wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover filletsall as specified and as directed. |
| 35 | M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centreall as specified and as directed. |
| 36 | M&L for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire meshall as specified and as directed.(Fillets, metal frame work and G.I. wire mesh paid separately) |
| 37 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for, all as specified and as directed. |
| 38 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coveringsall as specified and as directed. |
| 39 | S&F steel work in tubular trusses, rafters and posts etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 (grade st-240)complete all as specified and as directed. |
| 40 | S & F structural steel in roof trusses (framed), trussed, purlins, rails and fastenings and heavy bracket framing including distance pieces, cleats etc of grade (F-290 Gd E-165) complete all as specified and as directed. |
| 41 | S&FPlates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Ditto, with riveted, bolted or welded attachmentall as specified and as directed. |
| 42 | Material and labour for preparation of new or previously untreated steel or iron surfaces, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 43 | S&F pre-painted galvalume aluminum zinc coatingGI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed. |
| 44 | S&F pre-painted galvalume aluminum zinc coatingGI based plainsheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/valley gutter, fixed with self tapping screws all as specified and as directed. |
| 45 | Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles to store andrubbish off the premisesall as specified and as directed. |
| 46 | M&L 10 mm thick screed bedding layers in cement mortar 1:4 for laying floor finishes tiles all as specified and as directed . |
| 47 | M&L Joint free non skid ceramic colouredtiles 7 to 8mthick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchall as specified and as directed. |
| 48 | M&L Non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchall as specified and as directed. |
| 49 | M& L rendering plaster 10 mm thick in CM 1:3 on brick or concrete surfaces , finished fair and even .for receiving wall tilesall as specified and as directed. |
| 50 | M&L for glazed ceramic tiles, coloured of size300 x 400/450 x 7 mm thick as in dado/skirting and riser to steps and jointed in neat cement slurry and pointed in white or coloured cement to match completeall as specified and as directed. |
| 51 | M&L 20 mm thick screed bedding layers in cement mortar 1:4 for laying granite/chequered tile in stairs/parapetall as specified and as directed. |
| 52 | M & L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete asall as specified and as directed. |
| 53 | M&L for rounding to edges of stone slab one edge , such as in steps , cooking platforms , and similar situationsall as specified and as directed. |
| 54 | M&L for chequered cement tiles, 30 cm x30 cmx25mm thick, set, jointed and pointed with neat cement slurry in floors fixedwith white cement and pigments all as specified and as directed. (Note : Colour and pattern and sizeto be approved byGE. |
| 55 | Taking down chowkats or frames not exc. 1.5 Sqm each with shutters (without taking off shutters from the frame)all as specified and as directed. |
| 56 | Taking down old unserviceable aluminium doors or framesexc. 1.5 Sqm not exc 4sqm each with shutters (without taking off shutters from the frame)all as specified and as directed. |
| 57 | Taking down old unserviceablealuminium windows with frame and grills completeall as specified and as directed. |
| 58 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails . MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail & bottom rail on either side & as gap insert for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the M s frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement ,supplying & fixing in the frame at site as per specification & drawing all as specified and as directed. |
| 59 | S&F solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specification & drawingall as specified and as directed. |
| 60 | Supply and fix Aluminium windows casement type (34 mm Series)powder coated aluminium sections with and including 5 mm thick plain sheet glass/frosted glass panes of openable typewith rubber lining, Casement type (34 mm Series) sections for mosquito proofing windows with aluminium alloy wire cloth , 0.45 mm nominal dia of wire and average width of aperture 1.40 mm in three panes divided with mullion section sash bars and aluminium standard decco grills 10 mm thick, fixed in with 1.3 mm thick standard aluminium \"F\" channels etc complete with following sections of HINDALCO or equivalentall as specified and as directed.Note:- The rates are inclussive of SS friction hinges grade 304(Eye Max) for aluminium windows , jointing cleats, rubber beading, \"U\" channels, handles, locking arrangements etc. complete.(a) \"H\"frame 44.50 x 34.00 x 2.00 mm Section No 2082(b)\"Z\" shutter 34.00 x 44.50 x 2.00 mm Section No 4124(c)Mullion 57.00 x 34.00 x 25.00 mmSection No 9139 |
| 61 | M&L for powder coated aluminium frame , shutters & sections for doors , windows , ventilators ,Cup boards ,including necessary rubber beading, locking arrangements etc. completeall as specified and as directed. |
| 62 | S&F in repairsdoor closer aluminium (extruded section) body hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixedall as specified and as directed. |
| 63 | S&F extruded aluminium alloy handles, fabricated type anodised 100 mm size complete all as specifiedall as specified and as directed. |
| 64 | S&F butt hinges 100 mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised C-21, all as specified and as directed. |
| 65 | S&F aluminium anodised barrel tower bolts of extruded section 150 mm sizeall as specified and as directed. |
| 66 | M&L for preparation of new or old steel surfaces over 10cm width or girth and applying two coat of VX polymer based anti corrosive pain over a coat of anti corrosive primer completeall as specified and as directed. |
| 67 | S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and waste pipes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mmall as specified and as directed. |
| 68 | S & Fin repairsvitreous china wash down water closet (Pedestalpattern) whitewith \"P\" trap complete including plastic seat cover whiteclosed pattern with flat bottom,and cover with plastic hingescompleteall as specified and as directed. |
| 69 | S&F in repair Vitreous China valve less, syphonic action type, flushing cistern 10 ltrs, low level, white, with inlet, ball valve, float and handle including bracketsall as specified and as directed. |
| 70 | S&F in repairs vitreous china wash basin, white flat back, counter type, size 550 X 400 mm excluding taps, fixed to wall by anchor bolts, waste coupling, waste pipe etcall as specified and as directed. |
| 71 | S & F 32 mmbrass chromium plated bottle traps for washbasins with inlet and outletscrewed for pipe or connectionsincluding necessary packing, union and cap and fixed completeall as specified and as directed. |
| 72 | S&F in repair PVC connections , 15 mm sizewith PTMT nuts of length 600mmall as specified and as directed. |
| 73 | S&F in repairs fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixedall as specified and as directed. |
| 74 | S&F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass with(frameless) all as specified and as directed. , Make : Modi Guard or equivalent. |
| 75 | S&F in repairs Stainless steel soap dish fixed with SS screwsall as specified and as directed. |
| 76 | S&F in repairs Toilet paper holder SS fixed in repairscomplete all as specified and as directedall as specified and as directed. |
| 77 | S& fix in repairs Towel rail chromium plated SS, fixed in repairs complete 600mm longall as specified and as directed. |
| 78 | S&F in repair 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cementall as specified and as directed. |
| 79 | Taking down carefully copper/ aluminium point wiring (light, fan socket or power) complete, including fixture and fittings such as switches, ceiling roses, Pendants, regulators, sockets,lightfittings etc, removing materials to store for keeping in safe custodyor for taking credit (credit for above items should be made as per conditions separately) and making good the disturbed portion/ surface of wall/ floor/ ceiling etc by using cement mortar and colour/ white wash to match with the existing surface/location complete all as specified and as directed. |
| 80 | Taking down existing unserviceable sub main wiring/service wire from batten/conduit of any size including earth wire and removing from site complete all as specified and as directed |
| 81 | M&L for Point wiring with copper conductor, single core, PVC insulated, unsheathed stranded FRLS cable (IS 694), including PVC insulated copper multi-stranded conductor cable, unsheathed, of size 1.5 sqmm andone single core earth continuity multi-stranded conductor size 1.50 sqmm green in colour to common earth and connecting to earth dolly with copper crimp of suitable size and including PVC non-metallic rigid conduit with conduit accessories concealed in walls/ Ceiling / floor etc., including GI metal box 1.6mm thick with cover plate for fixing modular switches/ sockets/ fan regulators etc, complete all as specified for One light/ceiling fan/exhaust fan point controlled by one switch |
| 82 | -Ditto- as per Item No 81 but one socket outlet 3 pin 5 Amp Independent |
| 83 | -Ditto- as per Item No 81 but one socket outlet 3 pin 5 amp on Same board. |
| 84 | -Ditto- all as per item No 81 above but for 3/5 pin socket outlet 5/15 Amps, independent with 2.5 Sqmm single core PVC insulated unsheathed 1100 Volts grade multi stranded copper conductor FRLS complete with 1.50 Sqmm stranded copper conductor PVC insulated unsheathed earth wire and connecting to earth dolly complete all as specified and as directed. |
| 85 | M & L for submain wiring with two runsingle core PVC insulated unsheathed cable 1100 volts, grade having strandedcopper conductor of 4 sqmm nominal cross sectional area FRLS drawn through PVC casing and capping including one run of single core PVC insulated unsheathed copper conductor of size4 Sqmm for earth continuity conductor connected to earth dolly complete all as specified and as directed. Note :- I. Two runs of Copper Conductor of PVC insulated unsheathed 4 Sqmm and one run of size 4 Sqmm PVC insulated unsheathed copper wire & PVC casing capping will be measured as a single length. |
| 86 | M & L for submain wiring with two runsingle core PVC insulated unsheathed cable 1100 volts, grade having strandedcopper conductor of 6 sqmm nominal cross sectional area FRLS drawn through PVC casing and capping including one run of single core PVC insulated unsheathed copper conductor of size 6 Sqmm for earth continuity conductor connected to earth dolly complete all as specified and as directed. Note :- I. Two runs of Copper Conductor of PVC insulated unsheathed 6 Sqmm and one run of size 6 Sqmm PVC insulated unsheathed copper wire & PVC casing caping will be measured as a single length. |
| 87 | Supply and fix modular switch, one way, 06 Amps, one module complete all as specified & directed. |
| 88 | Supply and fix modular socket, 06 Amps, 02/03 pin combined, two module complete all as specified & directed. |
| 89 | Supply and fix modular Switch socket outlet multipurpose 3/2 pin, 5 amp andcontrolled by one switchcomplete all as specified & directed. |
| 90 | Supply and fix modular Switch socket outlet multipurpose 3 pin, 15 amp and one pin, 5 amp controlled by one switchcomplete all as specified & directed. |
| 91 | S&F Bell push modular type 5/6 Amps single pole 230 Volts AC for operating Bell/buzzer, including necessary connection complete all as specified and as directed. |
| 92 | S & F ceiling rose surface type bakelite 65x50 mm two to three terminal suitable for 230 Volts AC 6 Amps, complete all as specified and as directed. |
| 93 | S & F lamp holder, PVC/Polycarbonate type with back plate suitable forbatten fitting complete all as specified and as directed. |
| 94 | S & F bell ding dong, AC 230 Volt single pole, including necessary connection complete all as specified and as directed. |
| 95 | Supply and fix modular ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, 02 module 230 volts, 120 watts, duly ISI marked complete all as specified & directed. |
| 96 | S & F MCB ,SP 06 to 32 Amps C series 10 KA breaking capacity 240 Volts all as specified & directed.. |
| 97 | S & F MCB ,SPN 40 to 63 Amps C series 10 KA breaking capacity 240 Volts all as specified & directed.. |
| 98 | S&F PVC rectangular block for mounting, switches, sockets, fan regulators etc. with 3 mm thick plastic laminated sheet cover of size 200 mm x 150 mm x 50 mm deepall as specified & directed. |
| 99 | S&F PVC rectangular block for mounting, switches, sockets, fan regulators etc. with 3 mm thick plastic laminated sheet cover of size 175 mm x 100 mm x 50 mm deepall as specified & directed. |
| 100 | S & Fin renewal ofdistribution board sheet metal enclosure factory made fixed flush with wallsuitable for mounting isolators & MCB\"s etc.240 Volts, 200 Amps rated bus bar capacity SPN 8 way single doorcomplete all as specified and as directed. |
| 101 | S & F in renewal distribution board,double door type sheet metal enclosure factory made fixed flush with wall suitable for mounting MCB\"s & isolators 415 Volts 200 Amp rated bus bar with front openable TPN cover suitable for TP & N 04 way complete all as specified and directed |
| 102 | Supply and laying 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape or overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4 mm dia GIsuspension wire, 2 core cable 10 Sqmm stranded aluminium conductor cable flat or circular complete all as specified and as directed. |
| 103 | Supply and Fixing in renewal of sheet metal enclosure single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20AMPs complete all as specified & directed. |
| 104 | Supply and fixingin renewal of LED 10 wattsuitable for fixing in Normal pendent/Batten Holder 230 Voltcomplete all as specified and as directed. |
| 105 | S&F Decorative ultra slim linear LED lighting fixture with extruded AI, heat sink, environmental friendly, energy efficient 18 watt LED light fitting 4\" long including LED Tube suitable for the fitting with all arrangements and accessories, internally pre wired and including connecting with twin core twisted flexible copper conductor cable with suitable size upto ceiling rose complete all as specified anddirected by Engr- in - Charge. |
| 106 | S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed |
| 107 | M&L for earthing complete with GI earth plate electrode 60cm x 60cm x 6mm thick buried in ground vertically to a depth not less than 2.25 meters below ground level with the top edge of earth plate not less than 1.5 meters below ground level connected to galvanised iron earth wire 4mm dia by means of bolts, nuts, check nuts, washers made out of galvanised iron steel all as shown in electrical plate No 3 of SSR Part I and earth wire protected by galvanised pipe light grade 15mm bore and connected to LT panel/ pole through test point including necessary earth work and excavation in any type of soil, GI light grade 15mm bore watering pipe with funnel and wire brush, PCC 1:2:4 type B1 chamber with 20mm thick RCC 1:2:4 type B1 , cover slab with 6mm dia MS bars at 100mm c/c both ways with MS hook 6mm dia etc complete all as specified and directed and testing on complete |
| 108 | Taking downto ceiling fan/exhaust fan of any type, any capacity at any height and in any position and handover/deposited to MES storeas per direction of Engr in Charge |
| 109 | Supply and fix in renewal of BLDC ceiling fan of 1200 mm sweep, 220 - 240 volts, AC, 50 Hz including wireless remote and hanging with fan hook, down rod (length as per site requirement) and connecting up with provision of 3 core copper flexible cable of size 1.5 Sqmm from ceiling rose to fan complete all as specified and directed |
| 110 | Supply andFixing mirror light fitting composite 2x12 watt LED with Epoxy white powder coated CRCA sheet steel housing with clear/ opal acrylic diffuser including connecting flexible wire from ceiling rose to fitting , two no CFL lamp 18 Watt complete all as directed by Eng.-in-charge. Make ; HavellsCat No LHEWEBP6PL1W012 or equivalent makes in Appx’C’. |
| 111 | Supply and fixing TV plugCo-axial socket modular type including fixing accessories complete all as specified and directed |
| 112 | Supply and fixing two pin telephone socket modular type including modular plate and necessary cable connection all as specified and directed . |
| 113 | S and fix LED down lighter surface mounted 20 watt operating with 230v AC including fixing accessories complete all as specified and directed |
| 114 | S and fix LED down lighter recess mounted 15 watt operating with 230v AC including fixing accessories complete all as specified and directed |
| 115 | Supply and fix exhaust Ventilation fan of 200 mm sweep made of PVC body complete with louver and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to ventilation fan forconnection and making suitable size ofhole to existing brick wall for mounting fan complete all as specifiedand as directed.(Note : Cost of opening wall for fixing exhaust fan is deemed to be includedin overall rate quoted). |
| 116 | Disconnecting & taking down/out unserviceable LT Cable of any sizefrom Trenches, Floors, Walls, GI Pipes, etc. including Serviceable Cables, Bricks, etc. complete all as specified and as directed. |
| 117 | Excavation in trenches n exc 1.5m wide and n exc 1.5m depthfor laying of cable, erection of poles in soft loose soil all as specified and directed by Engr in charge |
| 118 | Removing excavated soil to a distance not exceeding 50 meterandnot exceeding 1.5 meter above the starting point,and depositing where directed complete all as specified and directed |
| 119 | M&L riddle sand in trenches for protection of UG Cables (below, above and around the UG Cable laid) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 180mm thickness, complete all as specified and as directed.NOTE : For the purpose of Payment, Punned thickness of riddle Sand Cushioning only will be Measured. |
| 120 | Material and labour for burnt bricks subclass B laid in trenches for cable protection all as specified and as directed. |
| 121 | Returning filling in excavated soil in trenches, watering and well ramming in layers n exc 25 cm complete all as specified. |
| 122 | Supply , layingand testingcable XLPE insulated, screened, PVC bedded, galvanised steel striporwire armoured, electric power cables (heavy duty)1100 volts , gradewith multistranded aluminium conductor, of size 50 sq. mm3.5 corecomplete all as specified and directed by Engr-In-Charge. |
| 123 | Supply , layingand testingcable XLPE insulated, screened, PVC bedded, galvanisedsteel striporwire armoured, electric power cables (heavy duty)1100 volts , gradewithstranded aluminium conductor, of size 25 sq. mm 3.5 corecomplete all as specified and directed by Engr-In-Charge. |
| 124 | Supply , layingand testingcable XLPE insulated, screened, PVC bedded, galvanised steel striporwire armoured, electric power cables (heavy duty) , 1100 volts , gradewithstranded aluminium conductor, of size16 sq. mm4 corecomplete all as specified and directed by Engr-In-Charge. |
| 125 | Supply , layingand testingcable XLPE insulated, screened, PVC bedded, galvanisedsteel striporwire armoured, electric power cables (heavy duty)1100 volts , gradewithstranded aluminium conductor, of size 10 sq. mm2 corecomplete all as specified and directed by Engr-In-Charge. |
| 126 | M&L Galvanised Steel Tubing Pipe 50mm bore (dia), light grade with Bend, laid in Trenches or under Roads/ Flooring/ Culverts and/or fixing to Electric Poles with suitable size Mild Steel Flat Iron Clamps, Bolts, Nuts, Washers, etc., complete all as specified and as directed. |
| 127 | Supply andfixing in renewal Energy saving IP65 LED flood light 70 watt luminaire with high poweras light source complete with all accessories including necessary electrical connections including taking down old unserviceable light fittings complete all as specified and as directed. |
| 128 | M&L Galvanised Steel Tubing Pipe 80mm bore (dia), light grade with Bend, laid in Trenches or under Roads/ Flooring/ Culverts and/or fixing to Electric Poles with suitable size Mild Steel Flat Iron Clamps, Bolts, Nuts, Washers, etc., complete all as specified and as directed. |
| 129 | Taking out old unsv GI pipe 15 mm bore with all connecting accessories complete from wall/ floor as as specified |
| 130 | Taking out old unsv GI pipe 25 mm bore with all connecting accessories complete from wall/ floor as as specified and as directed. |
| 131 | Taking out old unsv GI pipe 50 mm bore with all connecting accessories complete from wall/ floor as as specified and as directed. |
| 132 | S&F CPVC pipes, SDR 11, 15 mm outer dia of pressure rating 6kgf/sqcm conforming to IS-15778 with all CPVC fittings with such as brass elbow ,Tee, bends, unions ,sockets ,Threaded Adaptor and end pieces etc fixed to walls / ceilingwith clampsin Shafts/ductscompleteall as specified and as directed. |
| 133 | S&F CPVC pipes, SDR 11, 25 mm outer dia of pressure rating 6kgf/sqcm conforming to IS-15778 with all CPVC fittings with such as brass elbow ,Tee, bends, unions ,sockets ,Threaded Adaptor and end pieces etc fixed to walls / ceilingwith clampsin Shafts/ductscompleteall as specified and as directed. |
| 134 | S&F CPVC pipes, SDR 11, 50 mm outer dia of pressure rating 6kgf/sqcm conforming to IS-15778 with all CPVC fittings with such as brass elbow ,Tee, bends, unions ,sockets ,Threaded adaptor and end pieces etc fixed to walls / ceilingwith clampsin Shafts/ductscompleteall as specified and as directed. |
| 135 | S&F 1000 ltr capacity rotational moulded polythene water storage tank cylindrical vertical with closed top, hoistedthree layer and fixed including taking out old tank, all as specified and directed |
| 136 | S&F in repair 15mm dia brass, chromium plated mixer tap for mixing hot & cold water, screwed down, suitable for CPVC pipe complete all as specified and directed by Eng.-in-charge. |
| 137 | Supply and fix in repair 15 mm bore bib tap long body half turn, cast copper alloy chromium platedwith crutchor butterfly handle, complete all as specified and as directed. |
| 138 | Supply and fix in repair 20mm Stop cock, cast copper alloy chromium plated fancy type with long shank and cupcrutch or butterfly handle suitable for CPVC pipes complete all as specified and as directed. |
| 139 | Supply and fix 25 mm Stop valves, cast copper alloy chromium plated fancy type with long shank and cupcrutch or butterfly handle suitable for CPVC pipes complete all as specified and as directed. |
| 140 | Supply and fix 50 mm Stop valves, cast copper alloy chromium plated fancy type with long shank and cupcrutch or butterfly handle suitable for CPVC pipes complete all as specified and as directed. |
| 141 | S&F in repairHealth faucet suitable for ABS Body chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete suitable for working pressures of high rise buildings all as specified and as directed. |
| 142 | S&F in repairhalf/quarter turn 15 mm dia Angle cock, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down high pressure with crutch or butterfly handle, screwed both ends iron pipe suitable for CPVC pipes including taking down old cock, all as specified and complete |
| 143 | M&L Rewindingof electric water pump cap of 1 HP, of any make/type a with super enamelled copper wire of appropriate gauge and number of turns as existing to obtain the specified and satisfactory RPM as per manufactures specification, including replacement of all insulationmaterials, varnishing, heating, drying, assembling of stater/rotor, connection & testing complete. |
| 144 | Supply and fixing shower rose 125 mm size with 300 mm long arm chromium plated with swivel joints suitable for fixing to 15mm pipe or union all as specified and complete |
