Tender For Infrastructure Works For Svastik And Ihtks Division At 1St Floor At Sv Road.; 1 Demolishing brick work manually including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar 2 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 2.1 Of area 3 sq. metres and below 2.2 Of area beyond 3 sq. Metres 3 Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. 4 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 5 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. 6 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 7 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) 8 Extra for providing and placing in position 2 Nos 6mm dia. M.S. Bars at every third course of half brick masonry. 9 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) 10 6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand) 11 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 12 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. Complete 13 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 14 Providing and fixing Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 18 mm thick confirming to IS:14587 medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I (exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand. 15 Providing & fixing Float glass panes of nominal thickness 4 mm(weight not less than 10kg/sqm) fixed with wooden fillets (polished &painted) complete. 16 Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 16.1 (a) 100x58x1.90 mm 16.2 (a) 75x47x1.70 mm 17 Providingand Fixing GI Fastener 100x8 mm for properly fixing overhead cabinets to the wallls 18 Providing and fixing 50 mm special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 19 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Double strip (horizontal type) 20 Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineerin- charge. 21 Providing & Fixing 1.0 mm thick decorative high pressure laminated sheet of plain /wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. (1.5mm thick) 22 Providing and fixing 100 mm bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 23 Providing and laying Double charge Vitrified tiles in floor of size 1000 x 1000 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 24 Providing and laying Double charge Vitrified tiles in floor of size 1000 x 1000 mm(thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints. 25 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. 26 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. 27 For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron). 28 For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron). 29 Providing and fixing 12 mm thick Pre-laminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge. 30 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) 31 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mmthickness 32 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.Upto 5mm depth and 5 mm width 33 Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 34 Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 100x63x3.2 mm 35 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 35.1 (a) 100x10 mm 35.2 (b) 250x10 mm 36 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250 x16mm 37 Providing & Fixing roller blinds made up from vinyl coated fibreglass with fade resistant polymer to ensure complete opaquity with zero light transmittance having suitable coating on exterior (blackout quality of MAC or equivalent make) , including all fixtures and fittings complete in all respect as per design and instructions of the Engineer-in-charge including removal of old blinds. 38 Providing and fixing 6mm thick Pinup Board with backing support and suitable cloth shade all complete as per direction of Engineer-in-charge. 39 Providing and fixing 6mm thick writing Board with backing complete as per direction of Engineer-in-charge. 40 S/fixing Frosted glass films on glass partitions/doors any design copmlete as per direction of Engineer-in- Charge 41 Providing & fixing Signages (stainless steel) 3 mm thick S.S. Plate with engraving of letters completed as per direction of Engineer-In-Charge 42 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Make:- Polycab/Havells/RR Kabel 42.1 2 X 2.5 sq. mm + 1 X 2.5 sq mm earth wire 42.2 2 X 4 sq mm + 1 X 4 sq mm earth wire 42.3 2 X 6 sq. mm + 1 X 6 sq. mm earth wire 43 Supplying & drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. Make:-Legrand 43.1 1 run of cable 44 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.Make:-Delton/Polycab/Havells 44.1 2- Pair 45 Testing and Punching of Cat-6 cable in the existing RJ-45 wall sockets and network switches. 46 Testing and Punching of telephone wire cable in the existing RJ-11 wall sockets and MDF box. 47 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Make:-Legrand Myrius/Havells Crabtree/ABB 47.1 5/6 amp switch 47.2 3pin 5/6 socket outlet 47.3 Telephone socket outlet 48 Supplying and fixing following size/ modules GI box alongwith modular base and cover plate for modular switches in recess etc. as required. Make:-Legrand Myrius/Havells Crabtree/ABB 48.1 6 module (200 mmX 75 mm) 48.2 8 module (125 mmX 125 mm) 49 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. Make:-Legrand Myrius/Havells Crabtree/ ABB 50 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. Make:-Legrand Myrius/Havells Crabtree/ABB 51 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. 52 Supplying,installation,testing and commissioning of RJ 11 double telephone socket with shutter legrand make alongwith metal flush /PVC boxes legrand make and modular white plates legrand make on surface/ recess/ table trunking trench as required. Make:- Legrand Myrius 53 Supplying,installation ,testing and commissioning of modular type legrand make internet point RJ 45 (Information outlet) with shutter with modular metal/PVC box and plate in floor/ DLP/ Work Station or wall including cutting/ chasing etc complete as required. Make:- Legrand Myrius 54 Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts C curve DP MCB complete with connections, testing and commissioning etc. as required.Make:- Legrand 55 Supply & fixing of suitable size unbreakable box deep on surface or in recess or in DLP with suitable size modular plate cover in the front including providing and fixing 3 Nos 6 Amps modular type socket outlet with 1 no. 16 Amps modular type switch and suitable blanking plate connections, painting etc. complete as required. Make:- Legrand Myrius/Havells Crabtree/ABB 56 Supply & fixing of suitable size unbreakable box deep on surface or in recess or in DLP with suitable size modular plate cover in the front including providing and fixing 2 Nos 6/16 Amps modular type socket outlet with 2 nos 16 Amps modular type switch, connections, painting etc. complete as required. Make:- Legrand Myrius/Havells Crabtree/ABB 57 Supply andf ixing of following sizes of PVC conduit along with accessories in surface/recess/table trench including cutting the wall and making good the same incase of recessed conduit as required. Make:- Setia/AKG 57.1 25 mm 57.2 32 mm 57.3 40 mm 58 Supplying and fixing of DLP Plastic Trunking 150 mm X 50 mm with separator and other complete accessories in all respect in the existing surface/ Aluminium & Glass Partition/ wooden table etc as required. Make- Legrand 59 Supply and fixing of PVC channel 20mm (W)X12 mm (D) along with accessories in surface/recess/chisseling of ceiling/ cutting the wall and making good the same incase of recessed channel as required. Make:- Setia/AKG 60 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make:- Legrand 60.1 Single Pole 61 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. Make:- Legrand 61.1 8 way (4 + 24), Double door 62 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.Make:- Legrand 62.1 125 A, 36kA, FPMCCB 63 Supply & fixing of one number metal one way enclosures of DPX3 250 MCCB enclosure having no. of modules 3P & 4P on surface with drilling holes and making connections etc alongwith providing and fixing of 160 A, 36kA breaking capacity, DPX 160 FP MCCB with thermomagnetic release and terminal spreaders in enclosure including drilling holes in enclosures, making connections, etc. as required. Make:- Legrand 64 Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required. Make:- Legrand 65 SSupplying and fixing following rating miniature circuit breaker c series in the existing MCB DB complete with connections, testing and commissioning etc as required. Make:Legrand 65.1 MCB 40 Amp SP 240 V 66 Supplying, installation, testing & commissioning of elegantly designed sleek surface mounted pressure die-cast aluminium luminaire 18 W (Fixture size: Ø 175 mm, Height 35 mm) in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver. as required including all needed materials for completing the work. Make:- Havells/ Philips 67 Supplying, installation, testing & commissioning of aesthetically designed LED flat panel for surface / suspended mounting 36 W fixture size(LxWXH) in (600x600x70) mm which provides soft light and glare free symmetrical illumination with complete electronic driver as required including all needed materials for completing the work.Make: Havells/ Philips 68 Supply, Installation, Testing and Commissioning of wall mounted fan having 400 mm sweep, 1350 RPM, 65m3/min, 50 W, 50 Hz frequency including all materials needed for completing the work. Make:-Havells/Orient/Atomberg 69 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. Make:-Legrand 70 Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 70.1 300 mm width X 62.5 mm depth X 2.0 mm thickness 71 Painting with synthetic enamel paint of approved brand and manufacture of required color to give an even shade: 71.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture 72 Dismatling of existing light fittings, wires,armoured cables, switch plates, distribution boards, MCBs, MCCBs, earthing wires, metal boxes, ceiling fan, exhaust fan, window/ split airconditioning etc complete as required and deposite the same to the engineer incharge. 73 Supplying of one number ISI marked following sizes aluminium conductor XLPE insulated armoured power cable of 1.1 KV grade as required. Make: Polycab/Havells/ RR Kabel 73.1 4 core X 50 sqmm 74 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aliminium conductor cable of 1.1 KV grade as required.Make: Dowells 74.1 4 X 50 sq. mm (35 mm) 75 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required. 75.1 Above 35 sq. mm and upto 95 sq. mm (clamped with 25X3mm MS flat clamp) 76 P/F 10 SWG Dia wire on surface or in recess for loop earthing as reqd. 77 Supply ,installation, testing and commissioning of cordless remote control window type energy efficient air conditioners of cooling capacity of 24,000 BTU/Hr. (2.0TR) consisting of hermetic sealed rotary type compresser,air cooled copper condenser, fan motor, DX cooling coil,filters, controls like timers,auto restart , temperature control sensor,Air swing etc., cabling, wiring and first charge of referigerant and oil etc., suitable for single phase ,230 V, 50Hz, power supply with minimum 2-star rating or above with a warrantee of one year of complete AC unit & 5 years of compressor. Make- Blue Star/ Hitachi/ Carrier . 78 Supply ,installation, testing and commissioning of inverter type split air conditioner unit of 24000BTU/Hr (2.0 TR) cooling capacity each comprising an outdoor unit consisting of hermetic compresser rotary type, air cooled copper condenser, condenser fan, expansion device ,etc .and indoor unit consisting of centrifugal fan ,fan motor , DX cooling coil, outer casing ,filters ,control etc. both interconnected with copper refrigerent pipe (up-to 3m included in cost),cabling ,wiring, insulation and first charge of refrigerent and oil etc , suitable for single phase ,230V,50HZ., power supply, Make- Carrier/ Hitachi/ Mitsubushi & Minimum 5- star rating. All masonary work such as supports for any equipment , opening of hole in the wall etc. included and making the good. 79 Supply and fixing of MS steel stand suitable for 2.0 TR outdoor units duly painted to be installed at roof top /floor. 80 Supply and fixing of suitable size copper refrigerent pipe with proper insulation along with control cum transmission cable of 4core X 2.5 sqmm copper conductor PVC insulated cable for interconection of outdoor units and indoor units along with. All piping and wire inside the rooms is under the chizzled wall and outside the room shall be properly clamped along the wall. 81 Supply and fixing of 25/32mm dia CPVC/ PVC AC water drain pipe with bends, reducers, tees, support stand etc. as required to complete the work. 82 Supply and making chizzling work for fixing of copper referigerent pipe and drain pipe complete as required.. 83 Supply ,installation, testing and commissioning of single phase auto cut voltage stabiliser, copper winding with time delay relay etc. complete in all respect with a warrantee of minimum one year as following details:-Capacity-5KVA, input-170V to 250V,50Hz, output-220V to 240V, 50Hz 84 Dismantling of GI AC ducts and supporting Iron members etc. buy back the dismantled existing GI AC ducts and supporting iron members and old reinforced bars from brick walls etc. taking out of NISCAIR building premises including loading unloading and transportation etc. complete. The weight of the material will be ascertained on the basis of loaded vehicle and the tare weight of the vehicle after weighing the same at weigh bridge.
