Tender For Conservation And Development Work Of Gwalior Fort, Gwalior, Distt. Gwalior (M.P.), Cleaning Jungle Including Uprooting Of Rank Vegetation, Grass, Brush Wood, Trees & Saplings Of Girth Up To 30 Cm Measured At A Height Of Im Above Ground Level An, gwalior-Madhya Pradesh

Tender For Conservation And Development Work Of Gwalior Fort, Gwalior, Distt. Gwalior (M.P.), Cleaning jungle including uprooting of rank vegetation, grass, brush wood, trees & saplings of girth up to 30 cm measured at a height of Im above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. Scrapping and removing of white wash, distemper, oil paint, algae, etc from plain plaster and surfaces gently care to keep old designs intact. Stone consolidation-removing the loose/damaged stone and reconsolidating with new stone/reusable stone with lime mortar(1:3) wherever necessary Flush/Ruled/Struck or weathered lime pointing 1.2(1 Lime putty 2 Surkhi), On stonework Removal & refixing of stone chajja 50 to 75mm thick, stone used to be similar to the existing ones at the site, cutting in proper shape & providing interlocking keys in the new as well as old stone for proper bonding including finishing the edges in all respects in lime surkhi (1 lime putty 2 surkhi). Providing and laying lime concrete terracing on roofs with 20mm to 25mm nominal size brick aggregate and 50% lime mortar 1:2 (1 lime putty: 2 surkhi) rammed and finished with gur and belgiri treatment complete including rounding off junctions with parapet wall complete Removal of plant/ficus growth by pulling out root system embedded in masonry, cutting stem and branches carefully and safe disposal of cutted wood at designated dumping site including dismantling of necessary masonary whenever and wherever required and making good the same as directed by Engineer-in-charge etc. complete. Girth over 0.15 m to 0.30m Providing and laying Stone pitching work with stone size matching with the existing pitching laid in lime mortar 1:2 (1 lime: 2 sand) With dressed sand stone. Stone pitching i/e top surface smooth as per existing pattern. Red oxide plastering (up to 30cm height) with cement mortar 1:3(1 cement: 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor 18 mm thick. Repairing ornamental plaster works to match with the existing design using lime plaster (1 lime putty: 1 surkhi) 20mm thick plastering in lime mortar 1:2:1 (1 lime putty 2 Coarse sand: 1 surkhi) in two coats, base coat will be in 12mm thick and final coat will be in 8. mm thick including scaffolding preparation of Lime mortar mix for application of plastering, lime mortar to be mix with lime water which is to be applied with natural additives like jaggery, soapnut, bhel fruit, etc Including preparation of surface removing of dust and loose particles from the wall surface carefully and wetting the surface by help of water properly up to 4.5m hich and curine etc. complete, 50mm thick lime concrete flooring laid on existing base over the damaged floor up to 40mm average thickness, with brick aggregate size 25mm and 50% lime mortar 1:2 (1 lime putty 2 Surkhi) rammed and finished with lime putty complete Providing and laying lime concrete on floors with 20 mm nominal size brick aggregate and 50% lime mortar 1:3:6 (1 lime putty 3 surkhi 6 Coarse Sand) rammed and finished with gur and belgiri treatment. Removal of debries from the monument carefully without damaging the buried architectural parts/ remains of the monument and collect and stack all the intact parts at proper place for sorting of useful parts, study and refixing at the time of restoration of the monument as per direction of Engineer-In-Charge Local Archaeological Officer including 1.5m lift and 50m lead. 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of lime mortar 1:3 (1 lime: 3 coarse sand), including pointing with lime mortar 1:2 (1 lime 2 stone dust) with an admixture of pigment to match the shade of stone. Red sand stone Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling stone boulder/pitching floor laid in lime mortar i/e stacking of serviceable material and disposed of an serviceable material with in outside the monument etc. Providing & Fixing fine finished matching Stone Jali as per design/pattern matching with the existing and 50 mm to 75 mm thick. Using Dholpur Red sand stone Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete Providing and fixing in position MS dust bins made rounded shape with 18 gauge sheet fixing with ISMB 100 section pilliars i/e excavation for pillars, PCC ete complete in all respect as per instruction. Providing and fixing in position 100 mm thick rounded edge stone slab benches in fort campus resting in 2 nos of stone pilliars ic excavation for pillars, PCC etc complete in all respect bench size 1800x450mm and 450- 600mm height P/F Signage board made with angle iron 40x40x5mm 2.1m above Gl. and 0.60m below Gl. sheet of board 22 guage b/c painting, writing and fixing in ground with PCC M-15 with writing in Hindi and English. Cultural Board 1200x900 mm size Colour photography of before, during and other work in same angle/position, Photographs should be 7 x5 size in three sets and properly arrange and printed on Glossy sheet with spiral binding etc. complete

INR 10000 /-

INR 79423.0 /-

INR 79.42 Lakhs /-