Tender For Roof Treatment Of Sub Division Office And Other Civil Works At 33/11 Kv S/S Masani Distt. Mathura., Cement concrete with 2cm gauge approved hard stone ballast, coarse sand and cement in proportion of 3:1.5:1 including supply of all materials, labour, side shuttering if required and T&P etc. required for proper completion of work (CSI No. 5.21) RCC work with cement, approved coarse sand and 2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3 in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P.. (CSI No. 5.23) First class brick work in 1:6 cement and coarse sand (F.M.1.8 to 2.5) mortar in foundation and plinth including supply of all materials, labour & T&P etc. required for proper completion of work. (CSI No. 6.01) First class brick work in 1:6 cement and coarse sand (F.M.1.8 to 2.5)mortar in Super structure of one and Half Brick thick including supply of all materials, labour & T&P etc. required for proper completion of work (CSI No. 6.01+6.07 +6.08) Supply and fixing of 32 mm thick single leaf flush door shutter (boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to I.S.2202 part-1 (1983) ISI marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts.locks,handles, springs and other fittings but excluding their supply including all materials, labour & T&P etc. required for proper completion of work. (CSI No. 8.57) Mild Steel or Iron work in heavy sizes such as trusses built up gates, door frames, record, racks roof work gates etc. wrought to required form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor. (CSI No. 9.01) TMT/Tor steel in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor) (CSI No. 9.03) Providing and fixing steel glazed window and ventilators of standard rolled Mann or Mahavir steel sections conforming to IS 7452-1974 as per drawing joints metered & welded with 100x14x3.15 mm holdfast embedded in cement concrete block 15x10x10 cm. Size of 1:3:6 proportion i.e. 1 part of cement 3 part of approved coarse sand & 6 part of graded stone (aggregated 20mm. Nominal size) S/F of glass panes of plain pin headed 4mm. Thick nuts glazing clips and special putty of approved make complete and including a cost of red oxide paint. The fabrication should conform to I.S.1038-1975. (Aluminum beading with rubber packing included). (CSI No. 9.17) Supply and fixing galvanised mosquito proof jali (16x24 gauge) with M.S. flat of 20 x 3 mm. size, on both sides screwed or welded to window or door frame. (CSI No. 9.18) 12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6), minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. (CSI No. 11.09) S/mixing approved water proofing compound (CICO, DR FIXIT etc) in cement mortar in plaster or concrete work in the proportion as recommended by the manufacturer. (CSI No. 11.15) 3 mm thick floating coat of neat cement finish including supply of all materials, labour and T&P etc. required for proper completion of the work.( cement consumption 0.044 bag/Sq.m.) (CSI No. 11.20) 4.0 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC (CSI No. 12.04) Supply and Laying 6 mm thick glazed tiles in skirting / dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and T&P etc. completion required for proper completion of the work. (CSI No. 12.12) Applying Birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work. (CSI No. 13.20) Painting or varnishing new iron work in small areas or new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mix paint Luxol or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950. (CSI No. 13.01) As in item 13.01 above but every coat after the first coat. (CSI No. 13.02) As in item 13.01 above but for every coat on previously painted old wood or iron work including its sand papering, rubbing and cleaning as required, for proper completion of work. (CSI No. 13.03) As in item 13.08 but for every coat after the first coat. (CSI No. 13.09) As in item 13.08 but for every coat on previously old oil bound distemper surface (CSI No. 13.10) Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metres. (CSI No. 15.01) Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer In-charge within a distance of 60 metres. (CSI No. 15.05) Finishing walls with water proof exterior emulsion paint of ACE (ASIAN) or equivalent brand on already well prepared new wall surfaces with one coat of primer (ICI) followed by two coats of ACE exterior empulsion paint to give an even shade including thorough washing with water including as per direction of E/l direction of including cost of all materials, labour, T&P etc requried for proper completion of the work (NSI) Dismantling existing plaster including disposal of refuse as directed by the Engineer-I/C within a distance of 60 M. (CSI No. 15.11) Scrapping old white or colour wash or distemper including disposal of refuse as directed by the Engineer-I/C within a distance of 60 M. (CSI No. 15.12) Renewing panes of 4 mm glass including supply of glass with putty and brads including supply of all materials, labour and t&P etc, required for proper completion of the work. (a) glass of 5 mm thick. (CSI No. 20.04) (1) Disposal of rubbish / debris out side the UPPCL area as per direction of Er/in- charge including cartage, labour and materials, T&P etc. required for proper completion of the work. (No. deduction for voids shall be made). (CSI No. 20.16) Supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete. (CSI No. 20.17) L drops 16 mm dia x 300 long. (A) Tower bolts 10 mm dia x 250 mm long. (B) M.S.handles 100 mm size (F) Providing and fixing PVC BALL FLOAT VALVE 15 mm dia, WITH BRASS & UNION COMPLETE, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.06a) Providing and fixing PVC CONNECTION PIPE, 300X15 with 2 brass units ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.09) Supply and fixing of Syntex or equivalent make water storage tank including all materials, labours, T&P etc required for proper completion of work. (CSI No. 26.12) Providing and fixing CP BRASS BIB COCK15 mm dia. HEAVY QUALITY ( 200gm) (L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16 b) Providing and fixing of 110 mm dia PVC pipe 6 Kg/Sq.cm for with special such as Tee, bend, socket, elbow etc including supply of all labour, material, T & P etc complete required for proper completion of work, (CSI No. 26.17) P/F 20 mm dia ISI approved CPVC pipes complete with special such as bend tee. socket, crosee, clamp etc earth work including filling the trenches etc required for proper completion of the work, the rate also includes concealed Gl fitting where required, cutting and making good the walls etc and all materials labour and T&P complete (CSI No. 26.20) P/F 25 mm dia ISI approved CPVC pipes complete with special such as bend tee. socket, crosee, clamp etc earth work including filling the trenches etc required for proper completion of the work, the rate also includes concealed Gl fitting where required, cutting and making good the walls etc and all materials labour and T&P complete (CSI No. 26.21) Providing and fixing first quality white glazed Orissa pattern W.C.Pan Hindware, Cera make. size 580 mm. (Hindware, Cera Make) with out P trap including supply of all materials, labour and T&P etc.complete. (CSI No. 27.01) Providing and fixing 450X300 mm wash hand basin of white glazed earthern ware first quality I.S.I. marked (Hindware, Cera make) including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.10) Providing and fixing 10 litres low level PVC flushing cistern, COMPLETE WITH ALL FITTINGS including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.12) Providing and fixing in position 32 mm, dia P.V.C. WASTE PIPE FOR WASH BASIN, including supply of all materials, labour and T&P etc.required for proper completion of the work. (CSI No. 27.14)
