Tender For Beautification Of Building Work Of Dog Park Near Medical Chauraha In Prayagraj Under Smart City Mission, 1 Civil Work 2 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily Size of Tile 1000 x 1000 mm Flooring 3 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete skirting 4 Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50grams/ litre of approved brand and manufacture, including applyingadditional coats wherever required to achieve even shade and colour. Internal Painting 5 Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) 6 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) 1 Class Teak Wood 7 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well-matched teak 3 ply veneering. With vertical grains or cross bands and face veneers on both faces of shutters 25 mm thick 8 Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary screws etc. complete : 125x90x4.00 mm 9 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :250x10 mm 10 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16 mm 11 Providing and fixing aluminium hanging floor door stopper, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete 12 Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels 13 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all omplete as per the architectural drawings with 18 mm thick stone slab cover 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge 14 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door ±1mm), with wall thiframe to be Jointed with galvanized brackets and stainless steel scrjoints mitred and Plastic welded. The hinge side vertical of the framesews,ckness 2.0 mm (± 0.2 mm), corners of the door reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineerin-chargeExtruded section profile size 42x50 mm For Main Door Frame 15 Providing and fixing factory made uPVC white colour casement/casements fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weatherproof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made 16 casement window with double rebate frame with two side hung panel on outside and two side wire mesh panel on outside and on inside on French false mullion on SS304 Friction hinge on as per size and weight on sash multipoint locking system zinc alloy powder coated handles with shoot bolt and fly screen panel{ Using R3 Series with frame and 110 & above x 45 and aboveand glaze sash 65mm x 55 and abovefrench sash mullion 55 mm above x 60 mm and above } Window Glaze with wire mesh 17 Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mmmodule which includes providing and fixing C wall angle of size20x30x20 mm made of 0.5 mm thick pre painted steel along theperimeter of the room with help of nylon sleeves and wooden screwsat 300 mm centre to centre, suspending the main C carrier of size10x38x10 mm made of G.I steel 0.7 mm thick from the soffit withhelp of soffit cleat 37x27x25x1.6 mm, raw plugs of size 38x12 mmand C carrier suspension clip and main carrier bracket at 1000 mmc/c. Inverted triangle shaped Spring Tee having height of 24 mm andwidth of 34 mm made of Gl steel 0.45 mm thick is then fixed to themain C carrier and in direction perpendicular to it at 600 mm centreswith help of suspension brackets. Wherever the mainC carrier andspring T have to join, C carrier and spring T connectors have to beused. All sections to be galvanized @ 120 grams/sqm (both sideinclusive), fixing with clip in tiles into spring T with 18 GI Metal Ceiling Clip in plain Beveled edge global whitecolor tiles of size 600x600 and 0.5 mm thick with 25mm height, made of G I sheet having galvanizing of 100gms/ sqm (both sides inclusive) and 20% perforationarea with 1.8 mm dia holes and having NRC of 0.5, electrostatically polyester powder coated of thickness60 microns (minimum), including factory painted after bending and perforation 19 Providing and fixing partition up to ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of120 gms/sqm(both side inclusive), consisting of floor and ceiling channel50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed tothe floor and ceiling at the spacing of 610 mm centre to centre withdash fastener of 12.5 mm dia meter 50 mm length or suitable anchorfastener or metal screws with nylon plugs and the studs 48 mm widehaving one flange of 34 mm and other flange 36 mm and 0.50 mm thickfixed vertically within flanges of floor and ceiling channel and placed ata spacing of 610 mm centre to centre by 6 mm dia bolts and nuts,including fixing of studs along both ends of partition fixed flush to wallwith suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisherand two coats of primer suitable for board as per manufacturesspecification and direction of engineer in charge all complete. 75mm overall thickness partition with 12.5 mm thick doubleskin tapered edged plain Gypsum plaster board conformingto IS: 2095: (part I): 2011 (Board with BIS certification marks 20 Steel work in built up section round square hollow tubes including cutting hoisting , fixing positioning , applying primer 21 S& filling in plinthwith sand under floors including watering ramming, consolidating and dressing (all including) Completed. 22 1:4:8 (1cement:4Coaurse sand zone : 40mm nominal size ) 23 P&L 60 mm thk faciory made CC interlocking paver block of M30 grade 24 Providing / supplying fixing including fittings of SS Handle {Stainless Steel Toughened Glass Handle, For Door 12MMSS 304 } 25 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom. Pivot & double acting hydraulic floor spring type fixing arrangement and making. Necessary holes etc. for fixing required door fittings, all complete as per direction. Of Engineer-in-charge (Door handle, lock, and stopper etc.to be paid separately). 26 Providing and Fixing ofNatural stone/ ceramic Glose wallcladding of approved colouro and size with cement mortar of 1:4 including arragement of scafolding materail in all hightmake Earthstona 20 mm thick 27 Providing / supplying fixing of ACP Wall cladding including fixing with necessary fitting screws /washer bolts 28 Providing Supply placing of Double Seater Sofa Velvet Loveseat Two Seater Sofa 29 Providing supplying of single seater sofa of type Velvet Designer Single Seater Sofa Chair 30 Table 1800x750x750 side table 900 wide x 600 D X 750 H , Three drawer padastal 390 w x435 D X624 H , Top of made 36 mm thick PLPB with 2 mm thick edge bending under structure MS frame 40 x20x1.6 , legs of sq.pipe 50mm , 16 guage , modesty 18 mm prelam board , three drawer padastal in combination of 12 mm in 18 mm prelam particle board legs of table using prim quality pvc leveller , all metal component epoxy powder coated . 31 Visitor Chair Made Of Good Quality Products MSPL Standard Models . Seat Plywood Made Of 12mm Hot Pressed . Upholstery PVC Structure Moulded With Prime Quality High Stretch Knitted Polyester Fabric . Seat & Back Are Firmly Connected To The Base . Chair Max Height . Base Seat 60mm Thick Moulded With PU Foam &Back Seat 60mm Thick Moulded With HD Foam . Arm Rest Fitted To The Seat With Armrest Connecting Brackets . Armrest Should Be Injection Moulded From Black Nylon. 32 Providing , supplying of GRC jali including fixing with all necessary accessories 33 Providing , fixing , ecovinyl with lamination including necessary design as per engineer incharge . 34 Provind ,supplyung of material andmaking of3D Wall Painting as per instruction of engineer incharge 35 Electrical Work 36 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 37 Supplying and drawing 3 x 1.5 sq. mm of FRLS PVC insulated copper conductor, single core cable in the existing surface/ PVC conduit as required. 38 Wiring for light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 39 Wiring forfan point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 40 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. 41 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, C curve including connections, painting etc. as required. 42 Supplying and drawing 1 x 1.5 sq. mm of FRLS PVC insulated copper conductor, single core cable in the existing surface/ PVC conduit as required. 43 Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit concealed in wall, complete with one No. 2.5 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earth contuiity wire drawn in conduitincluding matching colour wash etc., complete in all respect. 44 Supply and wiring of submain with two number 10 sq.mm.FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable in 25 mm dia heavy duty (2mm thick) PVC conduitconcealed in wall, complete with one No.6 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduitetc. complete in all respect. 45 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 46 Supply and fixing of recess/surface mounting square 24 to 32 Watt LED Down Lighter having Powder coated die cast aluminium housing with extended heat sink, diffuser/ Reflector and driver set complete in all respects. 47 Supply & fixing ornamental 60W LED Post top light made of die cast aluminium IP65 CRI >70 with SPD and efficacy more than 90 lumens per watt including all standard specifications with 5 mtr Cast Iron Pole of approved make (top dia 60mm, Bottom dia 114 mm and base plate 10mm thick) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P complete in all respect as per drawing. 48 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 49 2 X 16 sq. mm (22mm) 50 3-1/2 X 25 sq. mm (28mm)
