tender for 10 Work In System Strengthening At Dpr Sl No 10 11 12 13 15 17 18 19 21 22 Under Eudd 1 Noida, DETAILS OF WORK AND QUANTITY AGAINST E-TENDER NO. 118/EUDC-I/2023-24/NOIDA (WORKS) FOR CARRYING OUT THE 10 NOS. WORK IN HEADSYSTEM STRENGTHENING / REPLACEMENT OF DAMAGED POLE / ACB / CABLE / CONDUCTOR AS PER DPR S.NO. 10,11,12,13,15,17,18,19,21,22 IN AREA OF EUDSD-IV, NOIDA UNDER EUDD-I, NOIDA IN THE JURIDICTION OF EUDC-I, NOIDA (BUSINESS PLAN F.Y. 2024-25 RS. 86.34 CRORE FOR NOIDA ZONE), 1 Cartage of following material from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to various points site of work including loading and unloading at both ends : - 2 LT XLPE cable Al. 3.5x240 Sq.mm. 3 LT XLPE cable Al. 3.5x400 Sq.mm. 4 Earthing Complete 5 ACSR Dog Conductor 6 ST Pole 13 Mtr. long SP-70 7 ST Pole 11 Mtr. long SP-55 8 ST Pole 9 Mtr. long 9 PCC Pole 8.5 Mtr. long 10 11 KV V-type cross arm 11 O/D jointing Kit 3.5x240 Sq.mm. LT PVC 12 Straight Through jointing Kit 3.5x240 Sq.mm. LT PVC 13 Cable LT ABC (3x120+1x95+1x16) Sq.mm. 14 3 Phase Distribution Box 15 Providing & fixing of following material of standard make / best quality for complete the work of pole structure at HT / LT line as per RESPO norms by the contractor at his own cost : - 16 Clamp with nut & bolts for ST Pole 17 Al. lug ling barrel, off size (LS) 240 Sq.mm. 18 LT Piercing connector for size 120/95 19 Suspension clamp with I-Hook. 20 Dead End clamp with I-Hook. 21 HDPE Socket suitable for HDPE pipe 110 mm dia. 22 RCC / Stone Route Marker yellow colour with proper marking. 23 Dismantling of following item from various site of work and carriage from work site to J.Es store / central store including loading & unloading at both ends. 24 ST Pole of size 11 Mtr. (Old & used) 25 ST Pole off size (Old & damaged) 26 LT ACB damaged (iron scrap) 27 Cable LT ABC (3x120+1x95+1x16) Sq.mm. 28 ACSR Dog Conductor damaged 29 Removal of conductor from both side spans of damaged pole and removal of H.T/L.T. line accessories from damaged pole. 30 Diggingof pit of damaged pole in Pakka road (Hard soil) with the help of road cutter/digging machine, Tractor etc. for dismantling the pole. 31 Erection of S.T. pole 13 Mtr. including fitting of all reqired accessories of HT/LT line as per RESPO schedule. 32 Erection of S.T. pole 11 Mtr. including fitting of all reqired accessories of HT/LT line as per RESPO schedule. 33 Erection of S.T. pole 9 Mtr. including fitting of all reqired accessories of LT line as per RESPO schedule. 34 Erection of PCC pole 8.5 Mtr. including fitting of all reqired accessories of LT line as per RESPO schedule. 35 Grouting & Concreting of each pole (In ratio of 1:4:8 in Cement, sand and Brick Ballast) in size 450mmx450mmx1800 mm as per RESPO schedule Complete in all respects. 36 Construction of Plinth in size 450x450x300 mm of each (0.880 Cu.m) pole above the ground level(In ratio of 1:3:6 in Cement, sand and Brick Ballast) as per RESPO schedule Complete in all respects. 37 Excavation of earth and driving of M.S. earthing rod of size 20x2500 mm in earth and jointing through G.I wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts etc. as per RESPO schedule Complete in all respects. 38 Re-laying and resagging of conductor in both side spans of erected pole in H.T/L.T line. 39 Fixing of O/D jointing Kit 3.5x240 Sq.mm. LT PVC. Complete in all respect 40 Fixing of Straight Through jointing Kit 3.5x240 Sq.mm. LT PVC. Complete in all respect 41 Fixing of 3 Phase Distribution Box Complete in all respect 42 Laying, Lifting and final Binding, Sagging of Cable LT ABC (3x120+1x95+1x16) Sq.mm. including fixing of all accessories as per RESPO schedule Complete in all respects. 43 Laying, Lifting and final Binding, Sagging of ACSR Dog Conductor including fixing of all accessories as per RESPO schedule Complete in all respects. 44 Fabrication & Fixing of 11 KV V-type X-arm 65x65x6mm. 45 Drilling of dia suitable for 110 mm dia by trench less method by horizontal boring machine at a depth of 1.5 mtrs below the ground level for laying of cable complete in all respects. 46 Providing of 06 Mtr long pieces of HDPE pipe (4 Kg / m2) 110 mm Dia PN 4 PE 63 (PVVNL approved) after inspection of competent committee at manufacturing site of the items with actual guarantee period. 47 Laying and interconnecting of above 06 Mtr long pieces of HDPE pipe 110mm Dia PN 4 PE 63 (PVVNL approved) in trench for laying of cable complete in all respects.. 48 Digging of pits of size 4 mtr x 4 mtr x 1.5 mtr for cable loop. 49 Road Restoration charges for hot mixed pakka road / CC road / kaccha road / mix soil/ normal soil/ soft & hard rack as it is when start of work as per authority norms. 50 Laying and pulling of LT Cable through HDPE pipe, DTs to ACBs to LT line, loop & riser complete in all respects. 51 Hi port test for LT XLPE cable. 52 Hoisting of cable on double pole structure through GI pipe 6 inch dia 3 mtr long fixed on pole structure including its jumpering complete with clamps, bolts and nuts. 53 Providing and installation ofLT ACB630 Amp. with cabinet / structure (L&T, HPL, Schneider, ABB, Hevells, PVVNL approved make) as per following specification with all relevant certificate :- 54 630 amp. 03 pole fixed manual ACB. 55 Red/yellow/blue light indication 56 ON & OFF Indication 57 Amp., Voltmeter& energy meter digital 58 Metering C.T 630/5A, 59 Panel fabrication of size 1250mm x 900mm x 600 mmmade of M.S sheet 14 gauge with powder coating with panel lock and key arrangement.(two nos). and additional locking arrangement seprately including providing hut type shape as per drg. 60 Fabrication ofaluminium bus-bar for each phases 61 Incoming size 425 mm x 50mmx12 mm (twin) 62 Out going size 720 mm x 50mm x 12 mm(twin) 63 Neutral size 900mmx50mmx12 mm. 64 Fabrication of pannel stand made of M.S Angle of size 900mm x 600mm x 500 mm as per drg. 65 Assembly of above ACB, Indicators, Meters, Metering CT & bus bar arrangment in the panel, fitting the panel on Stand with nut and boltswith wiringetc. & grouting inratio 1:4:8 with cement, coarse sand and brick blast. 66 Providing and fixing of aluminium bus bar of size 300mmx60mmx12 mm on L.T side of T/F. 67 Making all connections with ACB & Distribution T/F and commissioning the ACB complete in all respect. 68 PROVIDING AND INSTALLATION OF CHEMICAL EARTHING FOR ACB (WITH ALL MATERIAL AND LABOUR) AFTER INSTALLATION RESISTANCE SHOULD BE LESS THAN ONE OHM. AS PER FOLLOWING (The all material and labour shall be provided by the contractor with 12 month guarantee for resistance value less than one OHM.) :- 69 Providing of earth elctrode for chemical earthing Pipe in pipe typeproper hot deep galvanization dia 50 mm length 3 mtr- 32mm x 6mmterminal connection hole dia 8mm The cavity between the pipe & pipe is filled with conductive mixture - for hermetically filling inside the cavity i.e. between secondary conductor & primary conductor, crystalline compound is to be injected in the electrode assembly. It is a combination of high conductivity metal alloys, copper & aluminum power, conductive carbon / cement and bonding material etc the electrode should be sealed from both the ends. The outer pipe of the elctrode should be galavanized the characteristics of this compound is highly cnductive, non magnetic & non corrosive in G.I. Including providing of backfill compound each elctrode should be supplied with bags of 25 kg x 2 bfc compound (ground resistance enhancement powder 50 kgs each CPRI tested for ACB installed at 11/0.4 KV L.T. Substation. 70 Providing and fixing of GI strip of size 32 mm x 6 mm suitable for ACB installed at 11/0.4 KV L.T. Substation. 71 Providing and fixing of PVC Pit covers for above earthing electrode terminals.
