|
| 1 | Dismantling G.C.I. or A.C. sheet roofing after carefully removing the bolts and nuts including stacking of the materials for reuse and removing the debris within 50m lead.i with supply of all labour, T&P, staging, scaffolding, etc. complete cleaning the debrises with all taxes, including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge. |
| 2 | Dismantlingbrick or stone masonry in lime or cement mortar above 3m height including stacking the useful materials for reuse and removing the debris within 50m cleaning the debrises with supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, testing charges, tollage, royalties, etc. complete but excluding GST & as per direction of Engineer-in-charge. |
| 3 | Removing old cement plaster from walls including raking out joints 12mm deep including stacking the useful materials for reuse and removing the debris within 50mwith supply of all labour, T&P, staging, scaffolding, etc. complete cleaning the debrises with all taxes, including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge. |
| 4 | Earth work in excavation in all kinds of soil with initial lead & liftwith dressing, leveling & compacting the foundation bed, breaking the clods to maximum 5cm to 7cm, disposing the material at a designated place and keeping the required quantities for back filling with cost of labour, T&P, tollage,transportation, loading at one end & unloading at other end, all taxes, excludingGST all complete as per the direction of Engineer-in-charge. |
| 5 | Filling in foundation and plinth with sweet sand including watering and ramming with cost of labour, T&P, tollage,transportation, loading at one end & unloading at other end, all taxes, excludingGST all complete as per the direction of Engineer-in-charge. |
| 6 | P.C.C(1:3:6) of using 40mm. & down C.B.G chips of approved quality in foundation & plinth including mixing hosting, laying to proper level & slope compacting, curing, watering charges etc. complete including cost & supply of all materials, labour, T&P, taxes, etc. complete but excluding cost of GST as directed by Engineer-in-charge. |
| 7 | Dry brick khoa rammed to 10Cm. thick using K.B. Brick, laying to proper level / slope, watering, ramming to receive A.S. Flooring including cost and supply of all materials,labour, T&P, taxes, etc. complete but excluding GST as per direction of Engineer-in-charge. |
| 8 | 25mm. thick A.S. flooring in cement concrete (1:2:4) at all floors & levels using 12mm. and down grade hardblack C.B granite chips of approved quality including mixing, hoisting, laying, compacting, curing, finished smooth to the exposed surface with a floating coat of cement punning, rounding the corners where found necessary including supply of all materials, labour, T&P, taxes, tollage, royalties, transportation charges, etc. complete but excluding GSTasdirected by Engineer-in-charge. (Repair work) |
| 9 | Brick work in Fly Ash Bricks of size 25cmx12cmx8cm having crushing strength not less than 75 Kg/Cm² to 99Kg/Cm² with C.M (1:6) includingsplay/cutting, racking out the joints curing, hoisting, staging at any heightwith cost and supply of all materials, labour, T&P, taxes, royalties, transportation charges, curing, testing charges etc. all complete but excluding GST as per direction of Engineer-in-charge. |
| 10 | 16 MM thick Cement plaster with cement mortar (1:6) proportion,over brick work including racking out the joints, finished smooth to the exposed surface, rounding the corners wherever found necessary including cost & supply of all materials, labour, T&P, staging,scaffolding, watering, curing, taxes, tollage, royalties, etc. complete but excluding cost of GST as per direction of Engineer-in-charge |
| 11 | 6 MM thick Cement plaster with cement mortar (1:4) proportion, over RCC work including racking out the joints, finished smooth to the exposed surface, rounding the corners wherever found necessary including cost & supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, tollage, royalties, etc. complete but excluding cost of GST as per direction of Engineer-in-charge . |
| 12 | Cement concrete (1:1.5:3) using 12mm to 20mm size C.B.G. chipsfor all floors, foundation & plinth etc. of approved quality mixing, hoisting, laying, compacting, curing withsupply of all materials, labour, T&P, taxes, tollage transportations, staging, scaffolding, curing, etc. all complete but excluding GST as per direction of Engineer-in-charge. |
| 13 | Supply Tor/TMT steel of Fe-500 confirming to IS-1786 including cutting, straightening, bending, binding & placing the grills in position for RCC works including binding the grills with binding wire of 18 to 20 gauge including cost of steel, all labour, materials, transportation charges, T&P, taxes, etc. all complete but excluding GST as per the direction of Engineer-in-charge. (NB: No payment shall be made for extra weight than theoretical co-efficient). |
| 14 | Providing rigid smooth leak proof centering & shuttering made ofsteel/ply, plank & bullah of approved quality for R.C.C. work for following structures and deshuttering, removing the same after due period with supply of all materials, labour, T&P,royalties, tollage, taxes if any excluding GST, etc. all complete for all floors / height as directed by Engineer-in-charge. |
| 15 | Roof slab, landing, projection Chajja upto 4.30 mtr. |
| 16 | Beam, column, girder |
| 17 | 25mm. (av) thick graded cement concrete in C.C.(1:2:2) using 12mm. to 6mm. size hard granite chips of approved quality including cleaning the roof top, washing, mixing, hoisting laying to proper level slope, gradient making rounding hunching at the corners, joints, finished smooth to exposed surface over 2 coats of WPC as water proofing course with cost and supply of all materials, labour, T&P, taxes, tollage transportations, curing, etc. all complete but excluding cost of GST as per direction of Engineer-in-charge. (New work) |
| 18 | Supplying, fitting, fixing Sal wood frame choukaths for doors, windows, ventilators, coaltaring two coats to wall side face of frame, fixing to position with required nos. of W.I. clamps of size 25cm to 30cm long, 35mm wide, 2mm to 3 mm thick in C.C(1:3:6) including cutting grooves in choukaths, jointing with adhesive solution fixing to proper position etc. all complete including cost and supply of all materials, labour, T&P, all taxes, transportation, staging, scaffolding etc. complete by excluding GST as directed by the Engineer-in-charge. NB: Sal wood frame for doors, windows & ventilatorswith all supplying, fitting & fixing. (For all floors) |
| 19 | Supply, fitting & fixing factory made 32mm thick single leaf seasoned piasal wood with anti-termite treated paneled door shutter having both side styled moulded having bottom rail of 200mm thick, top rail 100mm thick, middle lock rail 200mm thick alongwith straight vertical moulded style of 125mm width (total 2 pannels) &pannel should be 20mm thick piasal plank embaded 16mm to styles & rails with one no of aluminium aldrop of size 300mm x 16mm x 40mm, two nos of 150mm with 175mm x 40mm flat aluminium handles, 2 nos of 200mm x 10mm aluminium towerbolt & required numbers of wooden hinged cleats, fixing at position etc all complete, including cast of all materials, labour, loading & unloading charges all taxes, transportation charges, stacking at site store etc. all complete as per the directon of EIC. (Excluding cost of GST). NB: Size & design decided by the department as per the requirment at site. (For 1stfloors) |
| 20 | Supplying, fitting, fixing up AL window (sliding type) made up aluminum Section 9778 as window fram, section No. 4095, 4096 & 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending including locking arrangement including all fitting including supply of all labour, materials, scaffolding up to any height transportation charges T&P,all taxes etc. complete by excluding GST as directed by the Engineer-in-charge. |
| 21 | Supplying, fitting, fixing of Aluminium grill of approved qaulity for window & ventilator shutter providing rubber beading, aluminium U channels, angles, clips etc. including all fitting including supply of all labour, materials, scaffolding up to any height transportation charges T&P,all taxes etc. complete by excluding GST as directed by the Engineer-in-charge. |
| 22 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite)solid door / window / Ceosetory windows & other Frames/Chowkhat of size 50mm X 70mm with 0.75 Kg/cum density with all fittings and fixturesof stainless steelincluding cost of loading & un-loading charges, stacking at departmental stores with supply of all labour, materials like hinges, towe bolt, handle, aldrop etc. T&P, all taxes, transportation, etc. all complete as per direction of Engineer-in-charge (Excluding cost of GST) , |
| 23 | Providingand fixing factory made 18mm thicksingIe extrudedWPC (Wood Polymer Composite) solid board shutter with 0.75 Kg/cum density with all fittings and fixturesof stainless steelincluding cost of loading & un-loading charges, stacking at departmental stores with supply of all labour, materials like hinges, towe bolt, handle, aldrop etc. T&P, all taxes, transportation, etc. all complete as per direction of Engineer-in-charge (Excluding cost of GST) , |
| 24 | Supplying, fitting and fixing of M.S. grill gate including fabrication charges,with supply of labour and material,machinery, cost of fuel, electrode, gas, consumables hire and running charges of all kind of equipments,taxes,tollagesetc all complete but excluding GSTas per direction of Engineer-in-charge. |
| 25 | Finishing the wall surface byapplying two coat Arcylic wall putty water baseof approved quality on plaster surface area includingcleaning, brushing, removing the flakes sand papering the same for smooth surfaceincludingsupply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc.all complete but excluding GST as per direction of Engineer-in-charge. |
| 26 | Painting two coat with acrylic base plastic emulsion paint of approved quality shade including scraping, cleaning, washing the old paint with scraper filling the holes with plaster of paris preparing the surface by sand papering, applying paint uniformly including cost and supply of allmaterials, labour, T&P, all taxes, transportation charges, staging,scaffolding, etc. complete but excluding cost of GST as per direction ofEngineer-in-charge. |
| 27 | one coat Priming with water bond cement primer to the newly plaster surface of the exterior Wall or over the exisitng putty surface of the interior wall of approved make & shade to make an even finished surface in all heights with all scaffolding and staging including cost and supply of all materials, labour, T&P, all taxes, transportation charges etc. complete but excluding cost of GST as per direction of Engineer-incharge. |
| 28 | Exterior painting two coats to wall surface with acrylic based weather coat paint of approved quality & shade having resistance to Fungus, Fading, including scraping, cleaning, brushing, washing the old paint, with bio wash, removing the flakes applying uniformly two coats including supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc.all complete but excluding GST as per direction of Engineer-in-charge. |
| 29 | Painting one coats with approved quality & shade enamel paint on old iron work over one coat of red oxide primer including scraping, cleaning,the old paint surface sand papering, filling the holes with wax putty etc. all complete including cost and supply of all materials, labour,T&P, all taxes, transportation charges, staging, scaffolding, etc. all complete but excluding cost of GST as per direction of Engineer-incharge. |
| 30 | Painting one coats with approved quality & shade enamel wood paint on old wood work over one coat of primer including scraping, cleaning,the old paint surface sand papering, filling the holes with wax putty etc.all complete including cost and supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc. all complete but excluding cost of GST as per direction of Engineer-in-charge. |
| 31 | Painting and writing of figures and letters in different size upto 120 mm height with Supply of all labour, materials, T&P,taxes, etc. complete but excluding GST as directed by Engineer in charge. |
| 32 | Supplying fitting fixing of Vitrified floor tiles ( premimum Quality 600 x600 mm size)in floors, treads or steps and landing on 20 mm thick bed of cement mortar 1:4(1cement: 4 sand) jointed with white cement including rubbing and cleaning complete including supply of all labour materialtaxes tollage etc all complete but excluding GST as per direction of Engineer in charge.( New work) |
| 33 | Supplyingfittingfixingof6.5mmto6.7mmthickceramicwalltiles( premimum Quality 200 x300 mm or 200 x200 mm size)as approved by EIC in floors, treads or steps and landing on 12mm thick bed of cement mortar1:3(1cement:3sand)jointedwithneat cementslury mixed withpigmenttomatchtheshadesofthetilesincludingrubbingand cleaningcomplete includingsupplyofalllabourmaterialtaxestollage etc all complete but excluding GST as per direction of Engineer-in-charge. |
| 34 | Supply of Un-Skilled labour with T&Pfor cleaning of existing walls,periphery and other misc works with supply of all labour, T&P,staging,scaffolding,etc. but excluding cost of GST as per direction of Engineer-in-charge. |
| 35 | Supplying all materials, labour, T&P for cutting holes through brick & Rcc work including good to the same cement mortar(1:4) & leak proof to the damaged portion for taking C-PVC pipes & fittings at any height & any levels with cost & supply of all materials, labour,T&P, tollage, royalties, staging, scaffolding, all transportation charges, all taxes excluding GSTetc. all complete as directedby the Engineer- in- charge . |
| 36 | Supplying of following PH materials of good quality with ISI markwith all transportation loading & unloading at both ends with all taxes, tollage, royalty etc. Complete & deposited in the section store as per direction Engineer-in- harge.(Excluding GST) |
| 37 | Porcelain hand wash basin(16\" x 22\") |
| 38 | 15mm dia C.P Pillarcock |
| 39 | 32 mm CP waste |
| 40 | 32mm PVC Waste pipe |
| 41 | 15mmConnection pipe (PVC/CP) |
| 42 | 5mm thick bevelleged plate glass mirror24\" x 18\" size with masonite board and mirror screw. |
| 43 | 10 ltr capacity PVC low level cistern |
| 44 | Soap Holder |
| 45 | 150mm/100 mm dia C.I/CP. Grattings |
| 46 | 15mm dia C.Pstopcock |
| 47 | 15mm dia C.P angle stopcock |
| 48 | 15mm long body C.P. Bib cock |
| 49 | Long Flush bend for Cistern |
| 50 | Health faucet |
| 51 | C.P two way bib cock (Jaquar/plaza) |
| 52 | Commode (s-trap)EWC/AWC with cover |
| 53 | 1000 ltrs Capacity (PVC-3 core ) |
| 54 | Labour charges for fitting & fixing of IWC/ EWC/AWC/OWC holes in brick/ conc. work,making flooringwith CC(1:2:4) and neat cement finish with supply of fitting & materials with socket & screw joints including cutting threads to pipe, pipes to length including earth work excavation of all types of soil, required scaffolding & refilling the trench after the work & fixing of pipe line in wall with clamps of providing light barriers with supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST) |
| 55 | Labour charges for fitting ,fixing of low level cistern to all floors with all lead and lift with supply of screw,plug, washer,white cement etc all complete as per specificationwith supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST) |
| 56 | fixing of wash basin with hole for pillar tap, fixing of racket,making hole etc all complete with supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST) |
| 57 | Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specification.with supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST) |
| 58 | Fixing of bib cock /pillar cock /stop cock / towelrail/ring as per specificationwith supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST) |
| 59 | Labour charges for Installationof 1000ltr capacity PVC water storage tank of different sizesincluding fitting ,fixing of pipes , bibcocks , valves , stop cocks and other necessary fitings for water supply purposewith transportation , loading , unloading ,supply of all labour, T&P, taxes excluding GST etc. complete as directed by the Engineer-In Charge. |
| 60 | Supply of PVC pipes (Sch-80) of different dia.with ISI mark & specification including transportation, all taxes, tollage, & disposing the materials in site office store with stacking including supplying of all labour, T&P etc complete as per direction of Engineer-in-charge(Excluding GST) |
| 61 | 15mm UPVC Pipe |
| 62 | 25mm UPVC Pipe |
| 63 | 40mm UPVC Pipe |
| 64 | Supply of U-PVC fittings of different dia. of medium quality as per ISI mark & specification including transportation, all taxes, tollage, & disposing the materials in site office store with stacking including supplying of all labour, T&P etc complete as per direction of Engineer-in-charge(Excluding GST) |
| 65 | 15mm Dia. U-PVC union |
| 66 | 25mm Dia. U-PVC union |
| 67 | 15mm Dia. U-PVC elbow |
| 68 | 25mm Dia. U-PVC elbow |
| 69 | 40mm Dia. U-PVC elbow |
| 70 | 15mm Dia. U-PVC tee |
| 71 | 25mm Dia. U-PVC tee |
| 72 | 40mm Dia. U-PVC tee |
| 73 | 15mm Dia. U-PVCsocket |
| 74 | 25mm Dia. U-PVC socket |
| 75 | 40mm Dia. U-PVC socket |
| 76 | 15mm PVC Ball Valve |
| 77 | 25mm PVC Ball Valve |
| 78 | 40mm PVC Ball Valve |
| 79 | Thread tape |
| 80 | Labour charges for layingof PVC pipes and other PH materials laid on wall or under graund including dismantling , cutting holes in brick/ conc. Work supply of fitting & materials with socketand screw joints including cuttingthreads to pipe, pipes to length including eachworkexcavation of all types of soil,required scaffolding & refilling the trench afterthework andfixing of pipeline in wall with clamps of providing light barriers withsupply ofall labour ,T&P taxes etcall complete as per direction of Engineer in charge(Excluding GST) |
| 81 | Layingof 15mm to 25mm dia pipe |
| 82 | Laing of 40mm to 50mm dia pipe |
| 83 | Supplying, Fitting & Fixing the following PVC pipes and fittings of different dia with ISI mark(Supreme) including loading and unloading at both ends with all cost of materials,labours,T&P,,taxes,royalties etc.Allcomplete as per direction of engineering in charge. (Excluding GST) |
| 84 | 110mmPVC Pipe |
| 85 | 110mm PVC door bend |
| 86 | 110mm PVC plain bend |
| 87 | 110mm PVC P trap |
| 88 | 110mm PVC Cowl |
| 89 | 110mm PVC Clamp |
| 90 | Dismantling and removing R.C.C. columns, beams, slab, staircase landing, lintels including stacking the useful materialsand removing the debris within 50m with supply of all labour, T&P, staging,scaffolding, etc. complete cleaning the debrises with all taxes, including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge.(for ground Floor) |
| 91 | Engagement of following machineries for cleaning the debris after dimolishing the damaged building ,cleaning & levelling of soroundings...etc including hire & running charges of machineries, fuel , lubricants , operator expenses , T & P , safety of operator,tollage, all taxes excluding GSTetc.all complete as directed by the Engineer-in-charge.(N.B : No idle charges shall be paid ) |
| 92 | Hydraulic Excavator of 1 cum capacity |
| 93 | Tractor |
