Tender For Addition/Alteration To Certain Otm Accommodation At Afac Coimbatore; 1 Surface excavation not exceeding30 cm deep and averaging 15cm deep and getting out in hard and dense soil all as specified and directed. 2 Excavation in trenchesnot exceeding 1.5 m wide and n.exc. 1.5 m deep and getting out in hard/dense soil for laying of UG cables or for errection of pole complete all as specified and directed. 3 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed. 4 Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed. 5 M&L for broken stone or boulder hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete in all respect as specified. 6 M&L forsand cushioning under floor or in foundation including watering and consolidation for laying of interlocking pavour blocks, .all as specified and directed. 7 M & L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mmincluding excavating channel along the wall and rodding etc. complete all as specified and as directed.. 8 M&L for PCC 1:2:4 type B0 (using 12.50 mm graded agrregate) for padding concrete over the roof slab complete all as specified and directed. 9 M&L for cement concrete type B1 1:2:4 (20 mm graded aggregate) as in bed plate, copings and the for fixing angle pot etc on walls including weathering, slightly rounded or chamfered angles including form work complete as directed. 10 M&L for reinforced cement concrete 1:1.5:3 type A-1 (nominal mix)(using 20mm graded crushedstone aggregate) as inBeams, cantilevers, bressummers, lintels over 1.5m span completeall as specified and as directed 11 M&L for Pre- cast cement concrete type C1 1:3:6 (20 mm graded stone aggregate) block masonrywith solid blocks exc 10 cm in width and setting in cement mortar 1:4 complete,all as specified & directed. 12 M & L Formwork to sides and soffits of floor or roof beams, beam haunching, girders bressummers, lintels, cantilevers, shelves incl supports, overhangs, etc also splays between floors and beams etc for fair finished surfaces, complete all as specified and directed. 13 Taking down shutters of any description notexceeding 1 Sqm each all as specified and directed. 14 Taking down chowkhats or frames with shutters (without taking off the shutters from the frames) size not exceeding 1.50 Sqm all as specified and directed. 15 Taking down chokhats or frames with shutters (without taking off the shutters from the frames) size exceeding 1.50 sqm but not exceeding 4 Sqm, all as specified and directed. 16 S & F for Second class hard wood with plain, framed, panelled shutters 35mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, all as specified and directed. 17 S & F for Second class hard wood Glazed and skeleton shutters 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars),but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, all as specified and directed. 18 S & F for Second class hard wood with plain, solid,straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, all as specified and directed. 19 M & L for second class hardwood plain fillets. square,rectangular or triangular in section,wrought, secured with nails or brads; sectional area exceeding 13 and not exceeding 25 Sqm, all as specified and directed. 20 S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suplying and fixing in opening as per specification and drawing etc complete all as specified and as directed. 21 S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tube for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC C channel having PVC sheet strip of 20mm width stuck in side with solvent cement for stiles and plain colour PVC sheet for top rial, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement , suppling & fixing in the frame at site as per specification & drawing etc complete all as specified and as directed. 22 S & F Butt hinges medium weight cold rolled mild steel, and fixed 75 mm size, all as specified and as directed. 23 S & F Butt hinges medium weight cold rolled mild steel, and fixed 100 mm size, all as specified and as directed. 24 S & F Extruded aluminium alloy handles fabricated type anodised size 100 mm, all as specified and as directed. 25 S&F 150mm long Extruded aluminium alloy handles, fabricated type, anodised butt hinges, heavy weight, coldrolled mild steel and all asspecified and directed 26 S&F 200mm longAluminium anodised barrel towers bolts of extruded section and all asspecified and directed 27 S&F300mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections or cast aluminum alloycomplete and all asspecified and directed 28 S & F Floor door stopper 140mmlong with cover plate of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor, all as specified and as directed. 29 S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless stell wire staples, all as specified and as directed. 30 S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of apperture 1.40 mm and fixed withstainless steel wire staples, all as specified and as directed. 31 M&L for TMTbars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified and as directed. 32 M&L for TMTbars 6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified and as directed. 33 S & F MS hold fast for doors and windows etc, complete all as specified and directed. 34 M&L Mild steel framed work such as grills ,grating etc with ends of bars shouldered or riveted, or forged into spikes conforming to Fe 290-Gde -E-165,complete all as specified and directed. 35 S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc to FE 410-W (Gde-E-250) quality -A,complete all as specified and directed. 36 M&L for mild steel work in fencing posts and struts including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 37 Supply & fix 610 mm dia CONSEC-ZAL super Razor punched Barb Tape (SRBT) Aluminium base helix coil with and including necessary GI fixing clips for securing complete all as specified and as directed with following specifications :- (i) Dia of coil (unstretcherd)- 610 mm (ii) No.of circles -51 turn per coil (iii) Weight of each coil with hessain pack- 8.50 Kg (+0.50Kg) (iv) Coverage per coil- 8 RM (v) Central core wire - Made from 2.60 mm dia GI-HTSS wire as per IS-4454 galvanised as per IS-2629 (vi) Razor punched strip Razer punched tape is CONSEC-ZAL stell comprising of aluminium base with zinc alloy@150 gm/Sqm conforming to ASTM-A 792/A-792M with additional primer treated of Epoxy/ polyuretherane and final paint top coat of calicified green shade (BSL-139) by Hot dipping process all as specified and as directed. Note- Runing lenght of the wall shall be measured for the payment purpose. 38 Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) 39 S & F Pre - painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of any color having tensile stregth of 550 Mpa as in roof covering fixed to walls fixed with self tapping screws,complete all as specified and directed. . 40 M & L for anodised aluminium frame for aluminium cabin/partitions with one or more rebates including joining cleats for fixing and fixing to floor etc,complete all as specified and directed. 41 S & F Anodised aluminium door shutters, aluminium section weighing minimum0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc, complete all as specified and directed. 42 S & F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing minimum 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. 43 S&F Anodised aluminium snap grid frame work size of grid 605 x 605mm for false ceiling, complete all as specified and directed. 44 S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed. 45 M & L for 12mm Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid, complete all as specified and directed.(Note - Frame work for ceiling shall be measured and paid separately). 46 M & L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS - 15658-2006 of 80mm thickness , M-40 Grade with grey cement and pigment etc all as specified and as directed. 47 M & LChequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors,all as specified and as directed. 48 M & L for 100 mm thick PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub-bases, all as specified and as directed. 49 M&L 25 mm thick cement concrete type B-0,1:2:4 (12.5 mm graded aggregate) as in sub base of floors without extra cement, all as specified and as directed. 50 M & L for 100 mm thick PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) as in floors finishing surface even and smooth without using extra cement and making impression of expanded metal using spike rolling,all as specified and directed. 51 M & L for 75 mm thick Cement concrete type C1, 1:3:6 (using 20mm graded stone aggregate)as in Plinth protection including necessary form work as require,all as specified and directed.. 52 Dismantling floors, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises, all as specified and as directed. 53 M&L Virified Ceramic tiles as light shade 10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cementslurry and pointed in white or coloured cement to match the surface. 54 M&L Virified Ceramic tiles as dark shade 10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cementslurry and pointed in white or coloured cement to match the surface, all as specified and as directed. .. 55 M&L Virified Ceramic tiles as dark shade 10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces,set and jointed in neat cementslurry and pointed in white or coloured cement to match the surface, all as specified and as directed. . 56 M & L Non-skid coloured ceramic floor tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, all as specified and as directed. . 57 M & L Glazed coloured ceramic tilesin vertical surface 350x250x7mm/450x350x7mm thickset and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, all as specified and as directed. . 58 M&L for Screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes, all as specified and as directed. . 59 M&L for Screed bed or bedding layer of mortar 20 mm thick in CM 1:4 for laying floor finishes,all as specified & directed. 60 M&L for 10 mm thick rendering on fair faces of brick work or concrete surfaces with CM 1:4as in backing coat of skirting /dado all as specified and directed. 61 M & Lfor rendering in CM 1:6,10mm thick on fair faces brick or concrete surfaces finished even and smooth without using extra cement, all as specified and directed. 62 Flush pointing in CM 1:4 to random rubble masonry, uncoursed or brought upto courses all as specified and directed. 63 Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbling down with water, etc all as specified and directed. 64 M & L for 5mm thick rendering in cement mortar 1:3, on fair faces of concrete surfaces on ceiling, finished even & smooth without using extra cement, complete all as specified & directed. 65 M & L for 15mm thick rendering in cement mortar 1:4,on fair faces brick or concrete surfaces finished even and smooth without using extra cement, all as specified & directed. 66 Raking out joints/ pointing to brick tiles 20cm by 20cm laid flat as in floors, roofs, ceilings, chajjas, etc. and flush pointing in CM 1:3,all as specified and directed. 67 Raking out joints/ pointing work built in cement mortar to random rubble or polygonal rubble uncoursed or brought up to coursesall as specified and directed. 68 M & L for prepation of old treated wall surfaces and applying one coat of oil bound distemper all as specified and directed. 69 M&L for preparation of old surface and applying one coat of white wash on ceiling surface, all as specified and directed . 70 M & L preparation of old treated wallsurfaces and applying one coat of cement base paintof approved shade all as specified and as directed. 71 M & L preparation of old treated wallsurfaces and applying two coat with acrylic smooth exterior paint of approved shade,all as specified and as directed. 72 M & L prepation of newly plastered wall surfaces, applying3mm thick wall care putty and applyingtwo coats of distemper oil emulsion over over a coat of primerall as specified and as directed. 73 M & L for complete removal of existing treatment of wall, apply 3mm thick wall care putty, one coat of (chalk whiting) primer and two coat of oil bound distemper all as specified and as directed. 74 M & L for preparation of newlyplastered surfaces and applying threecoats of white washon ceiling surface all as specified & directed. 75 M&L for Preparation ofnew plastered surfaces of walls and applying two coats of exterior emulsion paint over a coat of primer,all as specified and directed .. 76 M & L for complete removal of existing treatment of wall, and applyingtwo coats with cement base paint of approved shade over and including one coat of exterior primer all as specified and as directed. 77 Preparation of old painted wooden surfaces of any description over 10cm width or girth and applying onecoat of synthetic enamel paint all as specified and as directed. 78 M&L forPreparation of oldsteel surface and applying one coat of synthetic enamel paint all as specified and as directed. 79 Preparation of new wood or wood based surfaces over 10 cm width or girth and applying twocoats of synthetic enamel paint over a coat of pink primer,all as specified and directed . 80 M & L for preparingnew steel and iron surfaces of any description over 10 cm in width or girth, priming with red oxide and applying two coats of synthetic enamel paint over a coat of red oxide primer 81 M & L for preparingnew steel and iron surfaces of any description n.exc 10 cm in width or girth, priming with red oxide and applying two coats of synthetic enamel paint over a coat of red oxide primer 82 Hacking out old broken glass (any thickness, size, quality or description) from wooden frames of stone, concrete or brick surrounds, glazed with putty or fixed with beads,all as specified and directed . 83 S&F Sheet glass, ordinary quality 4mm thick and glazing with oil putty or fixed with beads in square not exceeding 0.5 sqm in each pane,all as specified and directed . 84 M & L for sheet glass 5.5mm thickordinary quality and glazing with rebates/aluminium beading exceeding 0.5 sqm in each pane,all as specified and directed . 85 Supply only4mm sheet glass, ordinary quality ,not exceeding0.5 sqm in each glass, all as specified and directed. 86 Taking up or down 15 mm bore steel tubing and connections, and removing to store, complete all as specified and directed. 87 Taking up or down 20 mm bore steel tubing and connections, and removing to store, complete all as specified and directed. 88 Supplyng and laying of CPVC pipes outer diameter 50 mm SDR 11 & plain CPVC SDR 11 fitting all fitting such as union, elbow, socket, reducer, tee etcfixing on wall / ceiling or laying in floors/trenches laid under road/path/hard standing or fixed with wallcomplete all as specified and directed. 89 Supplyng and laying of CPVC pipes outer diameter 25 mm SDR 11 & plain CPVC SDR 11 fitting all fitting such as union, elbow, socket, reducer, tee etcfixing on wall / ceiling or laying in floors/trenches laid under road/path/hard standing or fixed with wallcomplete all as specified and directed. 90 S&F16 mm dia 3- layer PP-R Polyproperlene random copolymer) concealed pipes SDR 7.4 (PN 16) UV stablized andantimicobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polyproplene random fittings fixed to walls, ceiling or in floors etc,complete all as specified and directed. 91 S&F20 mm dia 3- layer PP-R Polyproperlene random copolymer) concealed pipes SDR 7.4 (PN 16) UV stablized andantimicobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polyproplene random fittings fixed to walls, ceiling or in floors etc,complete all as specified and directed. 92 M & L for PVC (SWR) multi floor trap of 75mm dia with grating including jointing with solvent cement etc, complete all as specified and directed. 93 S & F in repairs 110mm dia PVC (SWR) pipe single sockted in any length with rubber ring joints fixed to wallwith clamp, complete all as specified and directed. 94 S&F 110mm radius PVC (SWR) branch piece, single (single Y) equal or unequal, complete all as specified and directed. 95 M & L 75mm dia for PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed. 96 S & F in repairs75mm dia PVC (SWR) pipe single sockted in any length with rubber ring joints fixed to wallwith clamp, complete all as specified and directed. 97 S&F 75mm radius PVC (SWR) bends, complete all as specified and directed. 98 S&F75mm radius PVC (SWR) branch piece, single (single Y) equal or unequal, complete all as specified and directed. 99 S & F 50mm diaUnplasticised PVC pipe of pressure rating 10 kgf /cm2 fixed complete to walls, ceiling or in floors,complete all as specified and directed. 100 S & F PVC (SWR) pipe 75mm diasingle sockted in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed. 101 S & F PVC (SWR) pipe 110mm diasingle sockted in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. 102 S&F PVC (SWR) bends 110mm radius, complete all as specified and directed. 103 M & L for PVC (SWR) gullytrap of 125/110mm diaincludingsetting jointing with solvent cement, complete all as specified and directed. 104 S&F in repairs Bib taps, brass chromium plated fancy type with cruch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore, complete all as specified and directed. 105 S&F 20mm bore Gun-metal , globe or gate valve, with iron wheel head, screwed both ends for iron pipe fixed complete all as specified and directed. 106 S&F brass chromium plated health faucet with hand held and spring operated control valve with PVC flexible pipe connection of suitable length as directed fixed to 15 mm bore pipe, complete all as specified and directed. 107 S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white including seat cover and flush pipe etc complete all as per specified and as directed. 108 S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 Ltrs capacity , low level , white, with inlet , ball valve, float and handle including brackets and flush pipe etc complete all as specified and as direted. 109 S& F in repair Vitreous China wash basin, white, flat back, size 450x300mm excluding taps, waste, chain and plug and porcelain stopper but including brackets including 32mmPTMT waste coupling complete all as specifed and directed. 110 S & F 110mm bore PVC (SWR) vent cowl, complete all as specified and directed. 111 S & F PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as specified and directed. 112 S&F CPVC ball valve 50 mm for CPVC pipe SDR 11 complete all as specified and directed. 113 S&F CPVC ball valve 25 mm for CPVC pipe SDR 11 complete all as specified and directed. 114 S&F in repairs chromium plated angle valves, cast copper alloy, screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed. 15 mm size, complete all as specified and directed. 115 S&F in repairs Pillar taps fancy type cast copper alloy,with capstain head, chromium plated screwed down high pressure, with long shanks and fly nuts screwed for iron pipe and fixed 15 mm bore, complete all as specified and directed. 116 S&F 600mm x 450mm bevelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed towooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. 117 S&F sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connection union to pipe, overall size 915X460mm & bowl size 410mmX330mmX160mm complete all as specified and directed. 118 S&F 25 mm dia SS drapery rod , including brackets, decorative knobs at both ends & curtain rings 8 Nos (minimum) completeall as speccified and directed. 119 Disconnecting existings HDPE water tank exceeding 500 & not exceeding 1000 ltr capacity, setting a side (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and refixing in position. (Cleaning repairings, etc. measured separately), all as speccified and directed. 120 Cleaning and removing all scale and dirt etc, from HDPE tank exc 500 & n exc 1000 ltr capacity and from mouths of circulating pipes,all as speccified and directed. 121 Dismantling of HDPE water tank exc 500 & n exc 1000 ltr capacity and removing to store, all as speccified and directed. 122 S&F moulded polyethylene 1000 ltr water tank storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. 123 S&F in repairs 25 mm Ball brass valves, high pressure, with polythene float and flynut cimplete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. 124 M&L for cutting and screwing existing pipes 40 to 50 mm for alterations or additions and making connection / inserting suitable size tee and sockets for branch connection from main water line or lengthening screw on pipe to form connector complete all as specified and directed. 125 Removal of Plants/ Shrubs grown on walls/ slabs/beams by making holes or demolition of concrete etc and including applying suitable chemical for killing the roots of Plants, filling of holes with concreteand making good complete all as specified and directed. 126 Taking down existing roof treatment including clay tiles, screed bed , APP membrane etc on top of roof slab and cleaning with wire brushe and washing with water complete , including removal and dispose off the debris all as specified . 127 Chipping/removing loose concrete in cloumns/beams/ chajjas/roof slab etc. up to reinforcement bars without damaging the reinforcement, removing all the loose material and to make all the exposedsurface free from dust and all impurities etc complete allspecified and directed. 128 Removing corrosion of steel reinforcement by mechanical means like wire brushing, chipping to remove loose rust and then applying rust removal solution - Reebaklens RR of Fosroc (or equivalent product of Sika/Bostic India Ltd) by using brush application, leaving the surface for at least 15 to 30 minutes, then removing loose materials by scrubbing or with brush and applying anti corrosive coating to reinforcement Nitozinc primer of Fosroc (or equivalent product of Sika/Bostic India Ltd), all as recommended by product manufacturer. 129 Providing and applying one coat of structural grade epoxy coat by brush of approved make ang mixing of two components as per recommendation of manufacturer for procuct - Nitobond EP of FOSROCK/ Sikdur 32LP/ equivalent in Bostic India Ltd .NOTE -Application shall be provided not more than 5 hours before application of micro concrete/polymer mortar etc complete all as specified by the manufacturer. 130 Providing and applying 40 mm thick (In four layers of each 10mm thick) Shrinkage controlled, polymer modified, fibre reinforced cementitious repair mortar Renderoc SP 40 of Fosroc / plastocrete plus of Sika / equivalent in Bostic India ltd, mixed with water in a water & powder in ratio as recommended by manufacturer and applying on roof slab/Chajjas/Beams/Parapet walls etc.(Note:- Quoted rate is deemed to be inclusive of provideing scaffolding for working in patches upto a height of 15 Mtr complete all as specified and directed) 131 Supply and application of single component, seamless, spray applied, hybrid elastomeric PU based material ie Nitoproof 725 product of make - Fosroc chemicals(or product sikalastic 590 of make - Sika India Pvt Ltd or equivalentin make - Bostic India ltd) over a coat of primer i.e product Nitoproof WB primer of make - Fosroc chemicals (or product Diluted sikalastic 590 of make - Sika India Pvt Ltd or equivalent in make - Bostic India ltd), all as recommended by manufacturer and as specified & directed. 132 Note:-(i) Average minimum DFTof PU based material shall be 1mm and shall be applied by using a Graco pump.(ii) PU based material shall process the following properties :-Solids by volume - 65%, Tensile strength ASTM D412 - 1.75Mpa, Density - 1.3 g/ml, Elongation ASTM D-412 - 350%, Adhesion to substrate concrete - 1.9Mpa, Resistance to water - 10m pressure.(iii) Rate are deemed to be include for cleaning and preparation of surface to receive PU water proofing system including filling of cracks with cementitious repair mortars i.e product Renderoc CS of make - Fosrock chemicals (or equivalent product in make - Sika India Pvt Ltd / Bostic India ltd).(iii) Work shall be got carried out by authorised applicator of the manufacturer and it shall be got approved by the GE before progressing the work.(iv) 10 years guarantee shall be provided and security amount @ 5% of quoted amount shall be deposited by the bidder.. 133 M&L for Hydraulically pressed burnt clay tile plain of size 200x200x19-20mm thick,machine made laid over & including cement mortar screed 15mm thick in CM 1:6 mixed with water proofing compound and jointed and pointed in CM 1:3 mixed with 5% crude oil by weight of cement, complete all as specified and directed. 134 Taking down old unserviceable point wiring (light, fan socket or power) complete, including fixture and fittings such as switches,ceiling rose, pendents, regulators,sockets, light fittings etc, and making good disturbed surface of walls floors etc. all as specified & directed. 135 Taking down old unserviceable submain wiring of any size including GI/copper earth continuity conductor in PVC conduit on wall/roof and making good to disturbed surfaces all as directed. 136 Taking down Ceiling/Wall mountedfan sealing cable end, dismantling blades from fan and keeping in safe custodyfor reuse at site andmaking good disturbed surfaces, complete all as specified and as directed. 137 Refixingonly Ceiling fan with and including carrying out cleaning servicing, oiling and greasing of ceiling fans and connecting up including provision of cable from celling rose/ connector to fan all as specified and as directed. 138 M&L forcleaning all dust and providing one coat of painting to Ceiling fan complete, in situ with synthetic enamal paint by spraying including filling cavities with filler, all as specified and as directed. 139 Taking down exhaust fan, sealing cable end, dismantling blades from fan and keeping in safe custodyfor reuse at site andmaking good disturbed surfaces complete all as specified and as directed. 140 Refixingonly exhaust fan and connecting up including provision of cable from celling rose/ connectorto fan all as specified and as directed. 141 M& L for cleaning all dust and providing one coat off painting toexhaust fan complete, in situ with synthetic enamal paint by spraying including filling cavities with filler, all as specified and as directed. 142 Disconnecting electric connection and taking down main switch/SPN DB/TPN DBof any size and making good/levelling the disturbed surfaces of wall to match with existing surface, all as specified and as directed. 143 M&L for concealed Point wiring one light point controlled by one, one way switch complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistrandedcopper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit concealed with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc all as specified and as directed. (Note: Cutting chases and making good in wall / floor will be Measured and paid seperately) 144 All as per item No 142 above but one ceiling/exhaust fan point controlled by one, one way switch. 145 All as per item No 142 above but one light point controlled by two 2 way swithch. 146 All as per item No 142 abovebut one05 Amps socket outlet pointon same board. 147 All as per item No 142 above but oneswitch socket outlet point 5 Amps on independent board. 148 All as per item No. 142 above but with copper conductor cable FRLS, 2.5 Sqmm for one 3 pin socket outlet, 15 Amps and including 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board. 149 S&F Switch Modular 6A single pole, one way, 1 module complete all as specified and as directed. 150 S&F Switch Modular 6A single pole, two way, 1 module complete all as specified and as directed. 151 S&F Switch Modular 16A single pole, one way, 1 module complete all as specified and as directed. 152 S&F Modular Modular Bell Push 6A 1 Modulecomplete all as specified and as directed. 153 S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed. 154 S&F socket Modular 6/16A 2/3 pin combined 2 module complete all as specified and as directed. 155 S&F Modular fan regulator step type 120 W, 2 module complete all as specified and as directed. 156 S &F modular white cover plate with frame 1 module, complete all as specified and as directed. 157 S &F modular white cover plate with frame 2 module, complete all as specified and as directed. 158 S &F modular white cover plate with frame 3 module, complete all as specified and as directed. 159 S &F modular white cover plate with frame 6 module, complete all as specified and as directed. 160 S &F modular metal flush box 1/2 module, complete all as specified and as directed. 161 S &F modular metal flush box 3 module, complete all as specified and as directed. 162 S &F modular metal flush box 6 module, complete all as specified and as directed. 163 Supply and fixing LED lights fitting 1 x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose completeall as specified and as directed.. 164 Supply and fixing LED lights fitting 2 x 22W, 220V,AC suitable twin LED lightbox type with down rod,driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose completeall as specified and as directed.. 165 Supply and fixing recessed mounted pressure die-cast aluminium luminaire in powder coated wite finish in round profileLED lights fitting 1 x 12W, 220V,ACwith driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose completeall as specified and as directed.. 166 Supply and fixing LED light fitting mirror type withhigh out put diffuser 2 feet, 10 watt 220 V ACdecorative type with driver holder and LED lampincluding connecting up with three core flexiblecopper conductor cable of suitable size completeall as specified and as directed.. 167 S & F Call Bell Ding Dong AC 230 V single polecomplete connecting up withflexible copperconductor cable of suitable size,all as specified and as directed.. 168 Supply and fix MCB DB, TPN, 4 ways, Double door, 415 volt, isolated neutral bar with IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 completeall as specified and as directed. 169 Supply and fix MCB DB, SPN, 8 ways, double door, 240 volt, Isolated neutral bar with IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 completeall as specified and as directed. 170 Supply and fix MCB SP 6 to 32 Amps, 240Volts, 10 KA, B Curve completeall as specified and as directed. 171 Supply and fixing SPN 32 Amp rating 240 V, 10 KA C curve miniature circuit breaker (MCB) complete all as specified and as directed. 172 Supply and fixing MCCB 3 Pole , 415 V, Adjustable type,160 Amps with breaking capacity 36 KA complete all as specified and as directed. 173 Supply and fixing TPN/FP 40 to 100Amp rating 415 V, 10 KA B curve miniature circuit breaker (MCB) complete all as specified and as directed. 174 Supply and fixing TPN/FP TPN 16 To 32 AMP rating 415 V, 10 KA B curve miniature circuit breaker (MCB) complete all as specified and as directed. 175 Supply and fix ceiling rose surface type bakelite 65 x 50mm with three terminals, all as specified and as directed.. 176 M&L for concealed Sub main wiring by making recess in wall/surface complete with 4 runs of 10 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 10 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories suface/concealed in wall/Ceiling etcfrom Main DB to MCB DB all as specified and as directed.(Note - 4 runs of 10 sqmm, + 1 run of 10 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length) 177 M&L for concealed Sub main wiring by making recess in wall/surface complete with 2 runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories suface/concealed in wall/Ceiling etcfrom Main DB to MCB DB all as specified and as directed.(Note - 2 runs of 6 sqmm, + 1 run of 6 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length) 178 M&L for concealed Sub main wiring by making recess in wall/surface complete with 2 runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories suface/concealed in wall/Ceiling etcfrom Main DB to MCB DB all as specified and as directed.(Note - 2 runs of 4 sqmm, + 1 run of 4 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length) 179 M&L Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 M below ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt , earth lead GI wire 4mm dia ( 8 SWG) connectd to GI earth plate elcectrode by means of bolts, nuts, check nuts, washers of galvanised iron, thimbles and other end of earth wire connected to main switch board/ feedar pillar and protected by galvanised iron pipe medium grade 15mm bore and20mm bore medium grade GI pipewith funnel and wire mesh for watering including necessaryexcavation and earth works. PCC Chamber in cement concrete 1:2:4 type B-1 & RCC cover and all as shown in Electrical Plate No. 3 of SSR( Part-I) of 2009.(NOTEThe unit rate includes earthing wire, and protection pipe upto 7.5 metre) 180 M& L for making opening for fixing of Exhaust fan of size 300 mm sweep,making good the disturbed surface with cement mortar 1:3,complete all as specified and as directed. 181 Supply and fix exhaust fan, steel body, AC single Phase,230V of size 300msweep with blades, frame and louvers, complete all as specified and as directed. 182 Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring etc., and making good, cutting not exceeding 10 cm girth,all as specified and as directed. 183 S&F wall mounted fan of sweep 400 mm Speed 1350 RPM easy oscillating and tiltingand providing high air delivery, all as specified and as directed. 184 Supply and fixing LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessoriesprewired and including connecting up with three core flexible copper conductor cable with suitable, all as specified and as directed. 185 Supply and fix building security light 45 Watt, new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening separate driver compartment with IP66 protection and impact resistance of IK07 with 10KV built in surge protection device complete with and including suitable size GI bracket and fixing accessories such as clamps, nuts, bolts , washers etc. all as per Cat No. ENDURASUNDOWNSL45WLED765PASYBOTG of make -Havellsor Equivelent in other makes. 186 M&L for riddled earth filling in trenches above and below the cable as in cable protection, all as specified and as directed.(Note:- Punned thickness shall be mesured and paid) 187 Taking out old unserviceable underground cable of various sizes,all as specified and as directed. 188 M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, multi stranded, 1100 volts grade, cross-sectional area 70 Sqmm, 3.5 core with and including making connection by using necessary thimbles complete all as specified and directed 189 Supply and laid well burnt bricks sub-class B crushing strengh not less than 75 Kg per sqcm, for cable protection, brick shall be laid dry flat as width of brick eqals to the length of cable and the gap between two adjacent brick shall not exceed 10 mm, complete all as specified and as directed. 190 M&L for GI pipe 80 mm dia light grade with all fittings for cable protection laid under road/path/hard standing or fixed with wall/pole etc all as specified and as directed. 191 M&L for cutting of existing bituminous road/path/hard standing 0.30 mtr wide and 0.30 mtr thick for laying cable protection pipe 80 mm dia under the road/path/hard satnding at a depth not less than 60 CM below the normal ground level, returning filling soil and making good the disturbed surface of road/path/hardstanding by using cement concrete mortar 1:3:6 type C2, using 40 mm graded stone aggregatecomplete all as specified and directed. 192 Demolition ofbrick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles, all as specified and directed. 193 Demolition ofCement concretein below or above ground level and paving not exceeding 15 cm thickness, all as specified and directed. 194 Dismantling wrought iron or mild steel work of any description not otherwise provided for,all as specified and directed. 195 Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings,all as specified and directed. 196 Removing buildingmaterialout side the campus including loading and unloading etc., to a distance exceeding 5 Km but not exceeding 10Km out side the MD land ( Ministry of Defence), all as specified and directed.(NOTE - Responsibility regarding place of deposition and obtaining permission from concern authoritieswill be of contractor) .
