Tender For Supply Of Optics, Optomechanics, Light Safety Equipment, Optics Lab Consumables, Tiptilt Mirror, Ccd Camera, Light Sources And Lenslet Arrays, Berhampur-Odisha

Tender For Supply Of Optics, Optomechanics, Light Safety Equipment, Optics Lab Consumables, Tiptilt Mirror, Ccd Camera, Light Sources And Lenslet Arrays 1 Cage Assembly Rod, 6 Long, Ø6 mm, 4 Pack ● Ø6 mm Precision-Ground Stainless Steel ● 4-40 Removable Setscrew at Both Ends 6 2 Cage Assembly Rod, 12 Long, Ø6 mm ● Ø6 mm Precision-Ground Stainless Steel ● 4-40 Removable Setscrew at Both Ends 6 3 Cage Assembly Rod, 1/2 Long, Ø6 mm, 4 Pack ● Ø6 mm Precision-Ground Stainless Steel ● 4-40 Removable Setscrew at Both Ends 4 4 Cage Assembly Rod, 2 Long, Ø6 mm, 4 Pack ● Ø6 mm Precision-Ground Stainless Steel ● 4-40 Removable Setscrew at Both Ends 4 5 Cage Assembly Rod, 8 Long, Ø6 mm, 4 Pack ● Ø6 mm Precision-Ground Stainless Steel ● 4-40 Removable Setscrew at Both Ends 4 6 Cage Assembly Rod, 1/4 Long, Ø6 mm ● Ø6 mm Precision-Ground Stainless Steel ● 4-40 Removable Setscrew at Both Ends 12 7 Cage Assembly Rod, 4 Long, Ø6 mm, 4 Pack ● Ø6 mm Precision-Ground Stainless Steel ● 4-40 Removable Setscrew at Both Ends 3 8 Cage Assembly Rod, 1 Long, Ø6 mm, 4 Pack ● Ø6 mm Precision-Ground Stainless Steel ● 4-40 Removable Setscrew at Both Ends 4 9 30 mm Cage Mounting Bracket ● Compatible with 30 mm Cage Systems ● Brackets Offer Clearance for SM1 Lens Tubes 12 10 SM1-Threaded 30 mm Cage Plate, 0.35 Thick, 2 Retaining Rings, 8-32 Tap ● Post Mountable via 8-32 (M4) Tapped Hole ● 0.35 Thick ● Directly Mounts Optical Components Within a 30 mm Cage ● System Assembly 18 11 Internally SM1-Threaded End Cap ● black-anodized aluminum end caps used to seal off a Ø1 lens tube ● It has internal SM1 (1.035-40) threads to seal the end of an externally SM1-threaded lens tube 6 12 Ø1 Slip-On Post Clamp, 1/4-20 Tap, 1/4 Counterbore ● Clamping Feature Setscrew w/ 5/64 (2.0 mm) Hex ● Tapped Hole 1/4-20 4 13 5/64 (2 mm) Hex Key Thumbscrew, 4 Pack ● Red Anodized Adjustment Knob with Engraved Hex Size 1 14 Ø1 Slip-On Post Clamp, 8-32 Tap, 8-32 Threaded Stud ● Clamping Feature Setscrew w/ 5/64 (2.0 mm) Hex ● Tapped Hole 8-32 2 15 Ø1 Unthreaded Adapter for Ø11 mm Cylindrical Components ● Length 0.48 ● Smooth 1 (25.4 mm) Outer Diameter ● Two Setscrews Secure Collimator in Adapter 6 16 5 VDC, 2 A Regulated Power Supply with USB Type-A Port, 100/240 VAC ● 5 VDC Regulated Power Supply ● USB Type-A Port 2 17 SM1-Threaded Adapter for Ø11 mm, ≥0.35 (8.9 mm) Long Cylindrical Components ● External SM1 (1.035-40) Threads ● Setscrews Secure Component in Adapter ● Length 0.59 6 18 SM1 Lens Tube, 0.30 Thread Depth, SM1RR Retaining Ring, 5 Pack ● Stackable Design Enables Multi-Element Optical Systems ● SM1-Threaded (1.035-40) Bore Accepts Ø1 (Ø25.4 mm) Optics ● Internal Thread Depth 0.30 (7.6 mm) 3 19 Ø1/2 Optical Post, SS, 8-32 Setscrew, 1/4-20 Tap, L = 4, 5 Pack ● One 8-32 Tapped Hole on Top and One 1/4-20 Tapped ● Hole at Base ● Removable Double-Ended 8-32 Setscrew 1 20 SM1 Lens Tube, 2.00 Thread Depth, SM1RR Retaining Ring, 5 Pack ● Stackable Design Enables Multi-Element Optical Systems ● SM1-Threaded (1.035-40) Bore Accepts Ø1 (Ø25.4 mm) Optics ● Internal Thread Depth 2.00 (50.8 mm) 1 21 30 mm Cage Plate, Ø1.2 Double Bore for SM1 and CMount Lens Tubes ● Ø1.2 Bore Supports Outside Diameter of SM1 Lens Tubes and C-Mount Extension Tubes ● Compatible with 30 mm Cage Systems ● Nylon-Tipped Setscrew and Double Bore Securely Hold Lens Tubes ● Not Post Mountable 5 22 Externally SM1-Threaded End Cap ● Black-anodized aluminum end caps used to seal off a Ø1 lens tube. ● It has external SM1 threads to seal the end of an internally ● SM1-threaded lens tube 3 23 Extension Tube, Internal SM1 Threading of 3 Depth, External C-Mount Threading, One Retaining Ring Included ● SM1 Thread Depth 3.00 (76.2 mm) ● One Retaining Ring Included 9 24 Kinematic Mount with Vertical Drive, Ø1 Optics, 8-32 Taps ● Mounts Ø1 Optics ● Minimum Optic Thickness: 0.11 ● Total Angular Range of ±3° ● 0.25° per Revolution Adjustment ● Graduated Knobs with 50 Divisions per Revolution ● 8-32 Mounting Holes 2 25 Complete 1 x 1 Kinematic Base, Top and Bottom Plates, #8 Counterbores ● Ball and V-Groove Design Allows High-Precision Positioning ● Bottom Plate has a #8 Counterbore 3 26 4-40 Cap Screw and Hardware Kit for Mini-Series ● 4-40 SS Cap Screw, Thread Length: 3/16 Approx. Qty. 165 ● 4-40 SS Nut Approx. Qty. 200 ● 4-40 SS Cap Screw, Thread Length: 1/4 Approx. Qty. 135 ● #4 SS Washer, Outer Diameter: 0.313 Approx. Qty.350 ● 4-40 SS Cap Screw, Thread Length: 5/16 Approx. Qty. 135 ● 3/32 Hex Key for 4-40 Cap Screws Approx. Qty. 10 ● 4-40 SS Cap Screw, Thread Length: 3/8 Approx. Qty. 125 ● 0.050 Hex Key for 4-40 Setscrews Approx. Qty. 10 ● 4-40 SS Setscrew, 1/4 Long Approx. Qty. 190 1 27 Large Goniometer, 1.75 Distance to Point of Rotation, ±5° ● Distance to Point of Rotation from Top Surface 1.75 ● Rotation ±5° ● Accuracy 10 arcmin (0.167°) ● Load Capacity 1.0 lb (0.45 kg) ● Goniometer Dimensions (W x D x H) 1.50 x 1.50 x 0.75 ● Base Plate Dimensions (W x D x H) 1.50 x 2.50 x 0.20 ● Base Plate Mounting Features Two 1/4 Clearance Slots 1 28 Ø2 Manual Rotation Stage ● 360° Continuous Rotation ● Laser-Engraved Graduation Marks at 2° Increments and Witness Line ● Mounting Platform Height: 0.63 ● Four 1/4 Clearance Holes to Mount to Optical Tables or Breadboards 1 29 SM1 (1.035-40) Coupler, External Threads, 0.5 Long, Two Locking Rings ● Included Two Locking Rings ● Lens Tube Separation Range 0.22 - 0.34 ● Length 1.0 1 30 30 mm Cage System, XY Translating Mount for Ø1 Optics with Quick Release Plate ● Accepts Ø1.00 Optics ● ±1 mm Travel in X and Y via 3/16-100 Adjusters ● Drive 100 Threads per Inch (TPI) Adjusters ● Optic Mounting SM1 (1.035-40) Thread 3 31 30 mm Cage System, XY Translating Lens Mount for Ø1 Optics ● Accepts Ø1.00 (Ø25.4 mm) Optics up to 0.39 (10.0 mm) Thick ● ±1 mm Travel in X and Y via 3/16-100 Adjusters ● Drive 100 Threads per Inch (TPI) Adjusters ● Optic Mounting SM1 (1.035-40) Thread 1 32 1/2 Travel Manual Translation Stage for 30 mm Cage Systems ● Includes 1/2 (13 mm) Travel Micrometer with 0.001 (10 μm) per Graduation ● Precision Linear Ball Bearings ● Lockable Design 3 33 SM1 Lens Tube, 1.00 Thread Depth, One Retaining Ring Included ● Stackable Design Enables Multi-Element Optical Systems ● SM1-Threaded (1.035-40) Bore Accepts Ø1 (Ø25.4 mm) Optics ● Internal Thread Depth 1.00 (25.4 mm) 10 34 Ø1 Mounted Pinhole, 1000 ± 10 μm Pinhole Diameter, Stainless Steel ● Foil Material 300 Series Stainless Steel, ● Black-Oxide Conversion Coating ● Housing Material 6061-T6 Aluminum ● Pinhole Diameter 1 mm ● Foil Thickness 50 μm 2 35 SM1 Graduated Ring-Actuated Iris Diaphragm (Ø1.0 - Ø12.0 mm) ● SM1 (1.035-40) Threaded on Both Sides ● Ring-Controlled, Ø12.0 mm Max Aperture ● Black Spring Steel Leaves ● Locking Setscrew with 0.05 (1.3 mm) Hex 4 36 6-Axis Locking Kinematic Mount for Ø1 Optics ● Independent X, Y, and Continuous 360° Roll Adjustment ● Optic Cell Threading SM1 (1.035-40) ● Max Optic Thickness 0.57 (14.6 mm) ● Pitch/Yaw Adjust (Resolution) ±4° (5 mrad/rev) ● X/Y Adjust (Resolution) ±2 mm (254 μm/rev) ● Z Adjust (Resolution) ±3.2 mm (318 μm/rev) 1 37 Cage Rotation Mount for Ø1 Optics, SM1 Threaded, 8- 32 Tap ● 360° of Continuous Rotation, Lockable ● 2° Graduations on Dial, Labeled Every 20° ● Maximum Optic Thickness: 0.37 6 38 SMA Fiber Adapter Plate with External SM1 (1.035-40) Threads ● Threading External SM1 (1.035-40) ● Connector Type SMA 1 39 30 mm Removable Segment Cage Plate, 0.35 Thick, 8- 32 Mounting Holes ● Build Removable Cage Segments for 30 mm Cage Systems ● Accepts Ø6 mm Cage Rods ● Flexure Cam Lock Design Allows Cage Segment Removal ● SM1 (1.035-40) Internal Thread ● Two Retaining Rings Included 12 40 SM1 Retaining Ring for Ø1 Lens Tubes and Mounts ● Thread SM1 (1.035-40) ● Thickness 0.08 (2.0 mm) ● Clear Aperture Ø0.90 (Ø22.9 mm) 4 41 SM1 to M12 x 0.5 Lens Cell Adapter ● Adapter Type Thread-to-Thread Adapter ● External Threading SM1 (1.035-40) 4 42 Adapter with External C-Mount Threads and Internal SM1 Threads, 4.4 mm Spacer ● External Threads C-Mount (1.00-32) ● Internal Threads SM1 (1.035-40) 2 43 Ø3 Precision Kinematic Mirror Mount, 2 Adjusters ● Optics Secured in Double-Bored Hole with Nylon-Tipped Setscrew ● Thick Back Plate and Heavy-Duty Springs for Stability ● Fabricated from Black Anodized Aluminum ● Hardened Stainless Steel Inserts at Kinematic Contacts ● Reduce Wear ● Minimum Optic Thickness 0.28 (7.1 mm) ● Optical Axis Height 2.13 (54.1 mm) ● Adjuster Thread 1/4-80 2 44 Compact Rotation Stage with Fine Adjustment, 8-32 and 4-40 Taps ● Coarse Rotation Range 360°, Continuous ● Fine Adjustment Range ±6° ● Horizontal Load Capacity Overall: 25 lbs (11.4 kg) ● Fine Adjustment: 3.75 lbs (1.7 kg) ● Platform Diameter 1.00 (25.4 mm) ● Platform Height 0.75 (19.1 mm) ● Platform Mounting Holes 8-32 (1 Place) 4-40 (8 Places) ● Base Dimensions 1.50 x 1.50 (38.1 mm x 38.1 mm) 1 45 1.92 x 1.92 Kinematic Platform Mount ● Tapped Holes 6-32 (5 Places) ● Adjuster Thread 1/4-80 ● Angular Range ±4° 4 46 Ø35 mm Aperture, 30 mm Cage Plate, 0.35 Thick, 8-32 Tap ● Designed with the Largest Possible Clear Aperture (Ø35 mm) ● Compatible with 30 mm Cage Systems ● Nylon-Tipped Setscrew and Double Bore Securely Hold Lens Tubes ● Post Mountable with an 8-32 Tapped Hole 6 47 Rotation Mount for Ø1/2 Optics to Use with above stage ● Coarse Rotation: 360° Continuously Adjustable ● Graduations: 2° Increments ● Mount Ø1/2 Optics up to 7.3 mm (0.29) Thick ● Runout: <0.0001 (25 μm) Along Optical Axis ● Max. Clear Aperture: 0.43 ● Lockable Design 6 48 Compact Electronics Housing, In-Line BNC, Ø0.63 × 2.61 ● Ø0.63 × 2.61 In-Line BNC Feedthrough Housing ● Compatible with Off-the-Shelf Electronic Elements ● Accepts 10 mm x 15 mm PCB ● Male and Female BNC Connectors ● Blank Area to Label Custom Circuits 10 49 SM30 Retaining Ring for Ø30 mm Lens Tubes and Mounts ● Thread SM30 (M30.5 x 0.5) ● Thickness 0.08 (2.0 mm) ● Clear Aperture Ø1.10 (Ø27.9 mm) 10 50 Adapter with External SM1 Threads and Internal SM30 Threads, 0.29 Long ● External Threads SM1 (1.035-40) ● Internal Threads SM30 (M30.5 x 0.5) 6 51 FC/APC Fiber Adapter Plate with External SM05 (0.535- 40) Threads, Wide Key (2.2 mm) ● Connector Type FC/APC, 2.2 mm Wide Key ● Threading External SM05 (0.535-40) 9 52 SM30 Lens Tube, 1 Thread Depth, One Retaining Ring Included ● Internal Thread Depth 1.00 (25.4 mm) ● Stackable Design Enables Construction of Multi-Element Optical Systems ● SM30-Threaded (M30.5 x 0.5) Bore Accepts Ø30 mm Optics ● Compatible with All SM30-Threaded Components 6 53 30 mm Rotating Cage Segment Plate, Two SM1RR Retaining Rings Included, Imperial ● Rotates an Entire 30 mm Cage System Subassembly ● Around a Fixed SM1-Threaded Bore ● Post Mountable via 8-32 Tapped Hole ● Rotation Locked with Flexure Mechanism 1 54 Cage Rotation Mount for Ø1 Optics, SM1 Threaded, 8- 32 Tap ● 360° of Continuous Rotation, Lockable ● 2° Graduations on Dial, Labeled Every 20° ● Maximum Optic Thickness: 0.37 3 55 FC/APC Fiber Adapter Plate with External SM1 (1.035- 40) Threads, Wide Key (2.2 mm) ● Connector Type FC/APC, 2.2 mm Wide Key ● Threading External SM1 (1.035-40) 3 56 Blank 30 mm Cage Plate, 0.35 Thick, 8-32 Tap ● Ideal for Custom Machining to Mount Non-Standard Components ● Designed for 30 mm Cage System ● Post-Mountable via 8-32 Tapped Hole ● Black-Anodized Aluminum 2 57 SM05-Threaded 30 mm Cage Plate, 0.35 Thick, Two Retaining Rings, 8-32 Tap ● Directly Mounts Ø1/2 Optical Components Within a 30 mm ● Cage System Assembly ● 0.35 Thick ● Tapped with Our Standard SM05 Thread (0.535-40) ● Post Mountable via 8-32 Tapped Hole 3 58 Ø1/2 Universal Post Holder, Spring Loaded Locking Thumbscrew, L = 2 ● Base Swivels 360° for Mounting Convenience ● Post can Pass Through Base, Enabling Minimum Beam Height ● Magnets in Base Provide Holding Force Prior to Fastening to an Optical Table ● Spring-Loaded Hex Locking Thumbscrews for Positioning Ease 5 59 Ø1/2 Optical Post, SS, 8-32 Setscrew, 1/4-20 Tap, L = 2 ● One 8-32 Tapped Hole on Top and One 1/4-20 Tapped ● Hole at Base ● Removable Double-Ended 8-32 Setscrew 5 60 Ø3 Precision Kinematic Mirror Mount, 2 Adjusters ● Optics Secured in Double-Bored Hole with Nylon-Tipped Setscrew ● Thick Back Plate and Heavy-Duty Springs for Stability ● Fabricated from Black Anodized Aluminum ● Hardened Stainless Steel Inserts at Kinematic Contacts ● Reduce Wear ● Minimum Optic Thickness 0.28 ● Optical Axis Height 2.13 ● Angular Adjustment ±4º ● AdjusterThread 1/4-80 3 61 Fine Hex Adjuster, 1/4-80, 3/4 Long ● Adjusters Manufactured from 303 Stainless Steel ● 80 TPI Fine Adjustment 1 62 Small Goniometer with 1 Distance to Point of Rotation, ±10° ● Rotation ±10° ● Accuracy 10 arcmin (0.167°) ● Load Capacity 0.25 lbs (0.113 kg) ● Goniometer Dimensions (W x D x H) 1.00 x 1.00 x 0.50 ● Base Plate Dimensions (W x D x H) 1.00 x 1.85 x 0.20 ● Base Plate Mounting Features Two #4 Clearance Slots and ● One 8-32 Threaded Hole Below the Stage 2 63 Spanner Wrench for SM1-Threaded Retaining Rings, Graduated Scale with 0.02 (0.5 mm) Increments, Length = 3.88 ● Knurled Handle for Improved Grip ● Feature Engraved Scale 2 64 0.050 (1.3 mm) Hex Key Thumbscrew, 4 Pack ● Convenient Adjustment of Hex-Driven Actuators and Quick Component Assembly ● Red Anodized Adjustment Knob with Engraved Hex Size 2 65 Soft Jaw Pliers, Ø1/2 to Ø2.5 ● Ideal for Tightening and Loosening Ø1/2, Ø1, Ø30 mm, and Ø2 Lens Tubes ● Non-Marring, Smooth, Urethane Jaw Design ● Four Available Adjustment Positions 2 66 9/64 Hex Key Thumbscrew, 4 Pack ● Convenient Adjustment of Hex-Driven Actuators and Quick ● Component Assembly ● Red Anodized Adjustment Knob with Engraved Hex Size ● Replaceable Hex Tip 2 67 7-Piece Precision Screwdriver Set ● Superior Design for Maximum Control, Accuracy, and Durability ● Chrome-Molybdenum Vanadium Steel Blades ● Fast-Turning Swivel Caps with Cavity for Precision Centering ● No-Roll Handle Design 2 68 Digital Calipers ● Measurement Range 6.00 (150 mm) ● Resolution 10 μm (0.0005) ● Accuracy ±25.4 μm (±0.001) ● Contact Points Carbide-Tipped 1 69 Spanner Wrench for SM30-Threaded Retaining Rings, Length = 4.35 ● Individual Sizes for Standard Retaining Rings ● Knurled Handle for Improved Grip 2 70 Spanner Wrench for SM05-Threaded Retaining Rings, Graduated Scale with 0.02 (0.5 mm) Increments, Length = 3.88 ● Feature Engraved Scale ● Individual Sizes for Standard Retaining Rings ● Knurled Handle for Improved Grip 2 71 Spanner Wrench for SM1.5-Threaded Retaining Rings, Graduated Scale with 0.02 (0.5 mm) Increments, Length = 3.88 ● Feature Engraved Scale ● Individual Sizes for Standard Retaining Rings ● Knurled Handle for Improved Grip 2 72 Spanner Wrench for SM2-Threaded Retaining Rings, Length = 4.35 ● Length = 4.35 ● Individual Sizes for Standard Retaining Rings ● Knurled Handle for Improved Grip 2 73 30 mm Removable Cage Plate, Front and Back Plate, Internal SM1 Threading ● 30 mm Cage Compatible Back Plate ● Magnetically Coupled Mounting Carriage ● Accepts Ø1 (25.4 mm) Optics up to 0.20 (5.1 mm) Thick ● Back Plate and Mounting Carriage Have Internal SM1 Threading ● One Retaining Ring Included 2 74 SM1 Lens Tube, 3.00 Thread Depth, One Retaining Ring Included ● Stackable Design Enables Multi-Element Optical Systems ● SM1-Threaded (1.035-40) Bore Accepts Ø1 (Ø25.4 mm) Optics ● Internal Thread Depth 3.00 (76.2 mm) 3 75 f=19 mm, Ø1/2 Achromatic Doublet, SM05-Threaded Mount, ARC: 400- 700 nm ● AR Coating Range 400 - 700 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter Tolerance +0.00/-0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley) λ/4 ● Centration ≤3 arcmin ● Clear Aperture >90% of Diameter ● Damage Thresholdd Pulsed 0.5 J/cm2 (532 nm, 10 ns Pulse, 10 Hz, Ø0.566 mm) CW 300 W/cm (532 nm, Ø1.000 mm) ● Materials N-BAF10/N-SF6HT ● Mounting Thread SM05 (0.535-40) 2 76 f=19 mm, Ø1/2 Achromatic Doublet, SM05-Threaded Mount, ARC: 650- 1050 nm ● AR Coating Range 650 - 1050 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter Tolerance +0.00 / -0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley) λ/4 at 632.8 nm ● Centration <3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulse 5 J/cm2 (810 nm, 10 ns pulse, 10 Hz, 0.155 mm) CW 1000 W/cm (1070 nm, Ø0.971 mm) ● Materials N-BAF10/N-SF6HT ● Mounting Thread SM05 (0.535-40) 79 f=75 mm, Ø1 Achromatic Doublet, SM1-Threaded Mount, ARC: 400-700 nm ● AR Coating Range 400 - 700 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter Tolerance +0.00/-0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley)c λ/4 ● Centration ≤3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulsed 0.5 J/cm2 (532 nm, 10 ns Pulse, 10 Hz, Ø0.566 mm) ● CW 300 W/cm (532 nm, Ø1.000 mm) ● Operating Temperature -40 °C to 85 °C ● Lens Diameter (mm) 25.4 ● Mounting Thread SM1 (1.035-40) ● Materials N-BK7/SF5 2 80 ● f=75 mm, Ø1 Achromatic Doublet, SM1-Threaded Mount, ARC: 650- 1050 nm ● AR Coating Range 650 - 1050 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter 1 ● Diameter Tolerance +0.00 / -0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley) λ/4 at 632.8 nm ● Centration <3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulse 5 J/cm2 (810 nm, 10 ns pulse, 10 Hz, 0.155 mm) ● CW 1000 W/cm (1070 nm, Ø0.971 mm) ● Operating Temperature -40 °C to +85 °C ● Mounting Thread SM1 (1.035-40) ● Materials N-BAF10/N-SF6HT 2 81 f=80 mm, Ø1 Achromatic Doublet, SM1-Threaded Mount, ARC: 400-700 nm ● AR Coating Range 400 - 700 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter Tolerance +0.00/-0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley)c λ/4 ● Centration ≤3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulsed 0.5 J/cm2 (532 nm, 10 ns Pulse, 10 Hz, Ø0.566 mm) ● CW 300 W/cm (532 nm, Ø1.000 mm) ● Operating Temperature -40 °C to 85 °C ● Lens Diameter (mm) 25.4 ● Mounting Thread SM1 (1.035-40) ● Materials N-BK7/N-SF5 2 82 f=80 mm, Ø1 Achromatic Doublet, SM1-Threaded Mount, ARC: 650-1050 nm ● AR Coating Range 650 - 1050 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter 1 ● Diameter Tolerance +0.00 / -0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley) λ/4 at 632.8 nm ● Centration <3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulse 5 J/cm2 (810 nm, 10 ns pulse, 10 Hz, 0.155 mm) ● CW 1000 W/cm (1070 nm, Ø0.971 mm) ● Operating Temperature -40 °C to +85 °C ● Mounting Thread SM1 (1.035-40) ● Materials N-BAF10/N-SF6HT 83 f=100 mm, Ø1 Achromatic Doublet, SM1-Threaded Mount, ARC: 400-700 nm ● AR Coating Range 400 - 700 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter Tolerance +0.00/-0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley)c λ/4 ● Centration ≤3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulsed 0.5 J/cm2 (532 nm, 10 ns Pulse, 10 Hz, Ø0.566 mm) ● CW 300 W/cm (532 nm, Ø1.000 mm) ● Operating Temperature -40 °C to 85 °C ● Lens Diameter (mm) 25.4 ● Mounting Thread SM1 (1.035-40) ● Materials N-BK7/SF5 5 84 f=100 mm, Ø1 Achromatic Doublet, SM1-Threaded Mount, ARC: 650-1050 nm ● AR Coating Range 650 - 1050 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter 1 ● Diameter Tolerance +0.00 / -0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley) λ/4 at 632.8 nm ● Centration <3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulse 5 J/cm2 (810 nm, 10 ns pulse, 10 Hz, 0.155 mm) ● CW 1000 W/cm (1070 nm, Ø0.971 mm) ● Operating Temperature -40 °C to +85 °C ● Mounting Thread SM1 (1.035-40) ● Materials N-LAK22/N-SF6HT 5 85 f=125 mm, Ø1 Achromatic Doublet, SM1-Threaded Mount, ARC: 400-700 nm ● AR Coating Range 400 - 700 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter Tolerance +0.00/-0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley)c λ/4 ● Centration ≤3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulsed 0.5 J/cm2 (532 nm, 10 ns Pulse, 10 Hz, Ø0.566 mm) ● CW 300 W/cm (532 nm, Ø1.000 mm) ● Operating Temperature -40 °C to 85 °C ● Lens Diameter (mm) 25.4 ● Mounting Thread SM1 (1.035-40) ● Materials N-BK7/N-SF5 5 86 f=125 mm, Ø1 Achromatic Doublet, SM1-Threaded Mount, ARC: 650-1050 nm ● AR Coating Range 650 - 1050 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter 1 ● Diameter Tolerance +0.00 / -0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley) λ/4 at 632.8 nm ● Centration <3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulse 5 J/cm2 (810 nm, 10 ns pulse, 10 Hz, 0.155 mm) ● CW 1000 W/cm (1070 nm, Ø0.971 mm) ● Operating Temperature -40 °C to +85 °C ● Mounting Thread SM1 (1.035-40) ● Materials N-BK7/N-SF8 87 f=150 mm, Ø1 Achromatic Doublet, SM1-Threaded Mount, ARC: 400-700 nm ● AR Coating Range 400 - 700 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter Tolerance +0.00/-0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley)c λ/4 ● Centration ≤3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulsed 0.5 J/cm2 (532 nm, 10 ns Pulse, 10 Hz, Ø0.566 mm) ● CW 300 W/cm (532 nm, Ø1.000 mm) ● Operating Temperature -40 °C to 85 °C ● Lens Diameter (mm) 25.4 ● Mounting Thread SM1 (1.035-40) ● Materials N-BK7/SF5 5 88 f=150 mm, Ø1 Achromatic Doublet, SM1-Threaded Mount, ARC: 650-1050 nm ● AR Coating Range 650 - 1050 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter 1 ● Diameter Tolerance +0.00 / -0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley) λ/4 at 632.8 nm ● Centration <3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulse 5 J/cm2 (810 nm, 10 ns pulse, 10 Hz, 0.155 mm) ● CW 1000 W/cm (1070 nm, Ø0.971 mm) ● Operating Temperature -40 °C to +85 °C ● Mounting Thread SM1 (1.035-40) ● Materials N-LAK22/N-SF6HT 5 89 f=200 mm, Ø1 Achromatic Doublet, SM1-Threaded Mount, ARC: 400-700 nm ● AR Coating Range 400 - 700 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter Tolerance +0.00/-0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley)c λ/4 ● Centration ≤3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulsed 0.5 J/cm2 (532 nm, 10 ns Pulse, 10 Hz, Ø0.566 mm) ● CW 300 W/cm (532 nm, Ø1.000 mm) ● Operating Temperature -40 °C to 85 °C ● Lens Diameter (mm) 25.4 ● Mounting Thread SM1 (1.035-40) ● Materials N-SSK5/LAFN7 5 90 f=200 mm, Ø1 Achromatic Doublet, SM1-Threaded Mount, ARC: 650-1050 nm ● AR Coating Range 650 - 1050 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter 1 ● Diameter Tolerance +0.00 / -0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley) λ/4 at 632.8 nm ● Centration <3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulse 5 J/cm2 (810 nm, 10 ns pulse, 10 Hz, 0.155 mm) ● CW 1000 W/cm (1070 nm, Ø0.971 mm) ● Operating Temperature -40 °C to +85 °C ● Mounting Thread SM1 (1.035-40) ● Materials N-LAK22/N-SF10 91 f=250 mm, Ø1 Achromatic Doublet, SM1-Threaded Mount, ARC: 400-700 nm ● AR Coating Range 400 - 700 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter Tolerance +0.00/-0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley)c λ/4 ● Centration ≤3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulsed 0.5 J/cm2 (532 nm, 10 ns Pulse, 10 Hz, Ø0.566 mm) ● CW 300 W/cm (532 nm, Ø1.000 mm) ● Operating Temperature -40 °C to 85 °C ● Lens Diameter (mm) 25.4 ● Mounting Thread SM1 (1.035-40) ● Materials N-BK7/SF2 5 92 f=250 mm, Ø1 Achromatic Doublet, SM1-Threaded Mount, ARC: 650-1050 nm ● AR Coating Range 650 - 1050 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter 1 ● Diameter Tolerance +0.00 / -0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley) λ/4 at 632.8 nm ● Centration <3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulse 5 J/cm2 (810 nm, 10 ns pulse, 10 Hz, 0.155 mm) ● CW 1000 W/cm (1070 nm, Ø0.971 mm) ● Operating Temperature -40 °C to +85 °C ● Mounting Thread SM1 (1.035-40) ● Materials SF5/N-SF6HT 5 93 Ø1 Protected Silver Mirror, 10 Pack ● Thickness 6.0 mm (0.24) ● Thickness Tolerance ±0.2 mm ● Reflectance (Average) >97% for 450 nm - 2 μm, >95% for 2-20 μm ● Substrate Fused Silica ● Surface Flatness (Peak to Valley) λ/10 @ 633 nm ● Surface Quality 40-20 Scratch-Dig ● Parallelism <3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulsed 0.225 J/cm2 (800 nm, 99 fs, 1 kHz, Ø0.167 mm) 1 J/cm2 (1064 nm, 10 ns, 10 Hz, Ø1.010 mm) CW: 500 W/cm (1.07 μm, Ø0.974 mm) 1500 W/cm (10.6 μm, Ø0.339 mm) 2 94 Box with 10 Reflective ND Filters, Ø25 mm, SM1 Mounted, 350 - 1100 nm ● Included Optical Densities 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 1.0, 2.0, 3.0, 4.0 ● Inconel Coated Ø25 mm SM1 Mounted Filters ● Substrate N-BK7 ● Front Surface Coating Inconel ● Spectral Range 350 - 1100 nm ● Unmounted Optic Diameter Ø25.0 +0.00/-0.20 mm ● Unmounted Optic Thickness 1.0 ± 0.10 mm (unmounted) ● Clear Aperture 90% of Optic Diameter ● Surface Quality 40-20 Scratch-Dig ● Surface Flatness <2λ ● Parallelism <3 arcsec 2 95 Compact Laser Module with USB Connector, 520 nm, 0.9 mW (Typ.) ● Output Power (Typical) 0.90 mW ● Laser Safety Class Class 2 ● Beam Shape Round, Ø3 mm (Typical) at 5 cm ● Housing Dimensions Ø11.0 mm x 60.2 mm 1 96 Compact Laser Module with USB Connector, 635 nm, 0.9 mW (Typ.) ● Wavelength (Typical) 635 nm ● Output Power (Typical) 0.90 mW ● Laser Safety Class Class 2 ● Beam Shape Round, Ø3 mm (Typical) at 5 cm ● Housing Dimensions Ø11.0 mm x 60.2 mm 97 16 mm Cage-Cube-Mounted Polarizing Beamsplitter Cube, 620-1000 nm, 8- 32 Tap ● Ports 4 Ports with SM05 (0.535-40) Threading ● Beamsplitter Material N-SF1 ● Extinction Ratio TP:TS > 1000:1 ● Transmission Efficiency TP > 90% ● Reflection Efficiency RS, avg > 95% ● Transmitted Beam Deviation 0° ± 5 arcmin ● Reflected Beam Deviation 90° ± 20 arcmin ● Clear Aperture Ø12.50 mm ● Transmitted Wavefront Error <λ/4 at 633 nm over Ø12.50 mm ● Surface Quality 40-20 Scratch-Dig 2 98 30 mm Cage Cube-Mounted Pellicle Beamsplitter, 45:55 (R:T), 700 - 900 nm ● Ports 4, all SM1 Threaded (1.035-40) ● Membrane Material Nitrocellulose ● Housing Material Engraved Black Anodized Aluminum ● Temperature Range -40 to 70 °C ● Index of Refraction 1.5 at 550 nm ● Surface Quality 40-20 Scratch-Dig ● Transmitted Wavefront Error 0.5λ (Typical) ● Reflected Wavefront Error 1λ (Typical) 2 99 Cube-Mounted Pellicle Beamsplitter, 8:92 (R:T), Uncoated, 400 - 2400 nm ● Ports 4, all SM1 Threaded (1.035-40) ● Membrane Material Nitrocellulose ● Housing Material Engraved Black Anodized Aluminum ● Temperature Range -40 to 70 °C ● Index of Refraction 1.5 at 550 nm ● Surface Quality 40-20 Scratch-Dig ● Transmitted Wavefront Error 0.5λ (Typical) ● Reflected Wavefront Error 1λ (Typical) 2 100 Ø25.0 mm Unmounted Linear Polarizer, 550 - 1500 nm ● Laser Damage Threshold 1 W/cm2 Continuous Block ● 5 W/cm2 Continuous Pass ● Thickness (T) 2.0 ± 0.2 mm Clear Aperture Ø22.9 mm (Ø0.90) 2 101 Fabry-Perot Benchtop Laser Source, 637 nm, 8.0 mW, FC/PC ● Minimum Full Output Power 8.0 mW ● Setpoint Resolution 0.01 mW ● Laser Class 3B ● Numerical Aperture 0.10 - 0.14 ● Output Fiber Connector FC/PC, Wide 2.1 mm Key ● Compatible ● Power Stability 15 min: ±0.05 dB, 24 hr: ±0.1 dB (After 1 hr Warm-Up at 25 ± 10 °C Ambient) ● Display Accuracy ±10% ● Adjustment Range ~0 mW to Full Power ● Input Power 115 VAC / 230 VAC (Switch Selectable) 50 - 60 Hz ● Modulation Input 0 - 5 V = 0 - Full Power, DC or Sine Wave Input Only ● Operating Temperature 15 to 35 °C ● Storage Temperature 0 to 50 °C 1 102 Infrared Viewer, 350 - 1300 nm ● Spectral Sensitivity 350 - 1300 nm ● Resolution (Center) 60 LP/mm ● Field of View 40° ● Magnification 1X ● Objective Lens F1.4/25 mm ● Adjustable Iris Included ● Focus <0.1 m to Infinity ● Charging Port 5 V Micro-USB ● Non-Uniformity of Screen <20% ● Non-Uniformity of Response <15% ● Distortion of Image <18% ● Battery Life (Continuous) 50 hours ● Weight 0.4 kg ● Dimensions 153.0 mm - 157.1 mm x 172.9 mm x 51.0 mm (6.02 - 6.18 x 6.81 x 2.01) ● Temperature Range -10 °C to 40 °C ● Mounting Thread 1/4-20 Internal Thread 103 Compact Power and Energy Meter Console, Digital 4 LCD ● Display Type Graphical LCD 320 x 240 pixels, LED Backlight ● Display Screens Numerical, Bar Graph, Line Graph, Statistics, Simulated Analog Needle ● Viewing Area 81.4 mm x 61.0 mm ● (3.20 x 2.40) ● Refresh Rate 20 Hz ● Audio 1x Speaker ● Sensor Interface ● Time Constant Correction <1 s ● AD Converter 16 bit ● Trigger (Pulse Measurements, Pyroelectric Sensors) Adjustable, 0.1 - 100% ● Connector DB9F, Left Side ● Sensor Temperature Control Thermistor ● Temperature Range -10 to 80 °C ● Analog Outputs ● Signal Amplified Input Signal (Not Corrected) ● Voltage Range 0 to 2 V ● Accuracy ±3% ● Bandwidth Up to 100 kHz, Dependent on Sensor and Settings ● Connector SMA, Left Side ● Dimensions and Mounting ● Dimensions (L x W x H) 180 mm x 105 mm x 38 mm ● (7.09 x 4.13 x 1.50) ● Weight <0.5 kg (<1.1 lb) ● Mounting Options Kickstand; 1/4-20 Post Thread ● Operating Temperature 0 to 40 °C ● Storage Temperature -40 to 70 °C 1 104 Standard Photodiode Power Sensor, Si, 400 - 1100 nm, 50 nW - 50 mW ● Aperture Size Ø9.5 mm ● Head Temperature Measurement NTC Thermistor 4.7 kΩ ● Housing Dimensions Ø30.5 mm x 12.7 mm ● Active Detector Area 9.7 mm x 9.7 mm ● Cable Length 1.5 m ● Mounting Thread Universal 8-32 / M4 Tap, Post Not Included ● Aperture Thread External SM1 (1.035-40) ● Linearity ±0.5% 1 105 Nexus Breadboard, 30 x 48 x 2.4, 1/4-20 Mounting Holes ● Breadboard Thickness 60 mm (2.4) ● Top Skin Flatness ±0.1 mm (±0.004) Over Any 600 mm x 600 mm Area ● Construction Symmetrical Isotropic Construction in All Axes ● Top and Bottom Plates 5 mm (0.20) Thick Stainless Steel, 4003 Grade Working Surface ● Core Construction High-Density Plated Steel Honeycomb, 0.26 mm Thick ● Damping Proprietary Optimized Broadband Damping ● Side Panels Rigid Steel Box Section ● Side Trim Finish Matte Black Linoleum, 2 mm Inset from Table Surface ● Top Surface Finish Machined Matte Finish ● Threads and Spacing 1/4-20 Tapped Holes on 1 Centers ● Distance from Edge to First Holes 0.5 from Table Edge on all Sides ● Maximum Screw Depth 55 mm (2.1) [13.5 mm (0.53) for Outer Border Holes] 1 106 Clamping Fork, 1.24 Counterbored Slot, Universal ● Clamping Fork Secures Pedestal-Style Mount to a Breadboard or Optical Table ● 1.24 (31.5 mm) Long Counterbored Slot ● Swivel Fork 360° to Select Most Convenient Mounting Hole 1 107 1/4-20 Cap Screw and Hardware Kit Includes: ● 1/4-20 SS* Cap Screw, Thread Length: 3/8 Qty. 65 ● 1/4-20 SS* Cap Screw, Thread Length: 2 Qty. 35 ● 1/4-20 SS* Cap Screw, Thread Length: 5/8 Qty. 95 ● 8-32 SS* Setscrew, 1/2 Qty. 220 ● 1/4-20 SS* Cap Screw, Thread Length: 3/4 Qty. 83 ● 1/4-20 SS* Setscrew, 1/2 Long Qty. 120 ● 1/4-20 SS* Cap Screw, Thread Length: 1 Qty. 66 ● 1/4-20 SS* Setscrew, 3/4 Long Qty. 83 ● 1/4-20 SS* Cap Screw, Thread Length: 1 1/4 Qty. 52 ● 1/4-20 SS* Nut Qty. 80 ● 1/4-20 SS* Cap Screw, Thread Length: 1 1/2 Qty. 46 ● 1/4 SS* Washer, Outer Diameter: 0.500 Qty. 220 2 108 Ø1 Pedestal Pillar Post, 1/4-20 Taps, L = 3 ● Solid Stainless Steel Construction ● Precision Ground to Ø1 (Ø25.0 mm) ● Stackable via 1/4-20 (M6) Tapped Holes on Both Ends 4 109 Ø1 Pedestal Pillar Post, 1/4-20 Taps, L = 0.5 ● Solid Stainless Steel Construction ● Precision Ground to Ø1 (Ø25.0 mm) ● Stackable via 1/4-20 (M6) Tapped Holes on Both Ends 110 8-32 Cap Screw and Hardware Kit ● 8-32 SS* Cap Screw, Thread Length: 1/4 Approx. Qty. 100 ● 8-32 SS* Cap Screw, Thread Length: 1 1/4 Approx. Qty. 21 ● 8-32 SS* Cap Screw, Thread Length: 3/8 Approx. Qty. 70 ● 8-32 SS* Cap Screw, Thread Length: 1 1/2 Approx. Qty. 33 ● 8-32 SS* Cap Screw, Thread Length: 1/2 Approx. Qty. 55 ● 8-32 SS* Nut Approx. Qty. 125 ● 8-32 SS* Cap Screw, Thread Length: 3/4 Approx. Qty. 38 ● #8 SS* Washer, Outer Diameter: 0.375 Approx. Qty. 260 ● 8-32 SS* Cap Screw, Thread Length: 1 Approx. Qty. 35 2 111 Ø1 Pedestal Pillar Post, 1/4-20 Taps, L = 2 ● Solid Stainless Steel Construction ● Precision Ground to Ø1 (Ø25.0 mm) ● Stackable via 1/4-20 (M6) Tapped Holes on Both Ends 7 112 Ø1 Pillar Post, 8-32 Taps, L = 4 ● Directly Mount Optomechanical Components ● 8-32 Tapped Hole on Both Ends 3 113 Ø1 Pedestal Pillar Post, 8-32 Taps, L = 6 ● Solid Stainless Steel Construction ● Precision Ground to Ø1 (Ø25.0 mm) ● Stackable via 8-32 (M4) Tapped Holes on Both Ends 10 114 Kinematic Mirror Mount for Ø1 Optics ● Mounts Ø1 Optics at Least 0.12 (3 mm) Thick ● Optic Held with a Nylon-Tipped Setscrew ● Angular Range: ±4° ● Resolution: 8 mrad (0.5°) per Revolution ● Two Counterbored #8 (M4) Through Holes Allow for Left- or Right- Handed Orientation ● 5/64 (2.0 mm) Hex Sockets in Lead Screws Accessible With or Without Knobs Removed 2 115 Adapter with External 8-32 Threads and External 1/4-20 Threads ● Thread A (External): 8-32 ● Thread B (External): 1/4-20 ● Length C: 0.57 (14.5 mm) ● Machined from 303 Stainless Steel ● Adapt One Common Thread Standard to Another ● Ideal for Mounting Posts 10 116 Ø1 Pedestal Pillar Post, 8-32 Taps, L = 4 ● Solid Stainless Steel Construction ● Precision Ground to Ø1 (Ø25.0 mm) ● Stackable via 8-32 (M4) Tapped Holes on Both Ends 6 117 Ø1 Pillar Post, 8-32 Taps, L = 0.5 8-32 Tapped Hole on Both Ends 13 118 8-32 Stainless Steel Setscrew with Hex on Both Ends, 1/2 Long, 10 Pack ● Length: 1/2 (12.7 mm) ● Type: Double-Ended ● Hex: 5/64 (Both Ends) ● Material: 300 Series Stainless Steel 2 119 Ø1 Pedestal Pillar Post, 1/4-20 Taps, L = 1 ● Solid Stainless Steel Construction ● Precision Ground to Ø1 (Ø25.0 mm) ● Stackable via 1/4-20 (M6) Tapped Holes on Both Ends ● The 1/4-20 (M6) thread allows for easy integration of Ø1 post extensions and spacers. 7 120 1/2 XYZ Translation Stage with Standard Micrometers, 1/4- 20 Taps ● Actuators: 148-811ST Micrometer ● Resolution: 0.025 Translation per Revolution ● Travel: 0.50 ● Engraving: 0.001 (25.4 μm) per Division ● Taps: Top: 1/4-20 (Qty. 7) ● Bottom: 1/4-20 (Qty. 7) and 8-32 (Qty. 4) ● Barrel Size: Ø3/8 (Ø9.5 mm) ● Preconfigured, 3-Axis, Right-Handed XYZ Translators 2 121 Compact Variable Height Clamp, 1/4-20 Tapped Table clamp uses two cap screws: one in the 1/4-20 tapped hole to adapt the clamp to virtually any height and another in the slotted hole to secure the clamp to the table. 20 122 Ø1 Pillar Post, 8-32 Taps, L = 1 ● 8-32 Tapped Hole on Both Ends ● These pillar posts are machined from nonmagnetic 303 stainless steel 5 123 Ø3 Precision Kinematic Mirror Mount, 2 Adjusters ● Optic Diameter: 3 or 75.0 mm ● Minimum Optic Thickness: 0.28 (7.1 mm) ● Optical Axis Height: 2.13 (54.1 mm) ● Angular Adjustment: ±4o ● Number of Adjusters: 2 ● Type of Adjusters: Removable Knobs ● Adjuster Thread: 1/4-80 ● Mounting: #8 (M4) Counterbored Holes, 4 Places ● Optics Secured in Double-Bored Hole with Nylon-Tipped Setscrew ● Thick Back Plate and Heavy-Duty Springs for Stability ● Fabricated from Black Anodized Aluminum 5 124 Ø1 Kinematic Mirror Mount, 2 Differential Adjusters, 1 1/4- 80 Adjuster ● Optic Diameter: 1 or 25.0 mm ● Minimum Optic Thickness: 0.16 (4.1 mm) ● Coarse Angular Adjustment: ±4o ● Adjuster Thread: 1/4-80 / M3 x 0.40 / M3 x 0.375 ● Coarse Resolution: 8.3 mrad/rev ● Resolution Using Differential Mechanism: 660 μrad/rev ● (136 arcsec/rev) ● Minimum Incremental Movement: 2.91 μrad (0.6 arcsec) ● Mounting Style: #8 (M4) Counterbored Holes, 2 Places ● Angular Range with Differential Mechanism: ±1.5° ● Optics Secured in Double Bored Hole with Nylon-Tipped Setscrew ● Thick Back Plate and Heavy-Duty Springs for Stability ● Fabricated from Black Anodized Aluminum 2 125 Ø1 Clear-Edge Kinematic Mirror Mount, 2 Adjusters ● Ø1 Optics Between 0.10 and 0.25 Thick ● Angular Adjustment: ±4° ● Resolution: 8.3 mrad/rev ● Two #8 (M4) Counterbores Allow Left- and Right-Handed Post Mounting 2 126 Adapter with Internal 8-32 Threads and External 1/4-20 Threads, 0.38 Length 10 127 Ø1 Pillar Post, 8-32 Taps, L = 3 8-32 Tapped Hole on Both Ends 3 128 Ø4 Precision Kinematic Mirror Mount, 2 Adjusters ● Optic Diameter: 4 ● Minimum Optic Thickness: 0.28 (7.1 mm) ● Optical Axis Height: 2.85 (72.4 mm) ● Angular Adjustment: ±4o ● Number of Adjusters: 2 ● Type of Adjusters: Removable Knobs ● Adjuster Thread: 1/4-80 ● Mounting: #8 (M4) Counterbored Holes, 4 Places ● Optics Secured in Double-Bored Hole with Nylon-Tipped Setscrew ● Thick Back Plate and Heavy-Duty Springs for Stability ● Fabricated from Black Anodized Aluminum ● Hardened Stainless Steel Inserts at Kinematic Contacts Reduce Wear 2 129 Screw-On Cable Straps (Qty. 15) Screw-On Straps for Cable Routing on Optical Tables or Breadboards 2 130 Optical Grade Cotton-Tipped Applicators, 100 Per Pack ● 6 Wood Stick Disposable Applicators with Cotton Tips (100 per Pack) ● Appropriate for Cleaning Connectors or Optics 10 131 Kimwipes®, 280 Kimwipes per Box, 12 Boxes Per Case ● 4.4 x 8.4 (11.2 cm x 21.3 cm), Durable, Absorbent, Extra Low Lint Sheets ● Ideal for Cleaning Connectors between Polishing Steps 2 132 Lens Tissues, 25 Sheets per Booklet, 50 Booklets in a Closeable Box ● Extremely Soft, Premium Grade Sheets ● Single Sheet Dimension: 4.9 x 2.9 (124 x 73 mm) 1 133 20-Piece Balldriver and Hex Key Kit with Stand, Imperial ● Facilitates Organization ● Convenient Stand Included 2 134 Adjustable Spanner Wrench ● Diameter Range from 0.12 to 2.89 (3.0 mm to 73.4 mm) ● Self-Centering, One-Handed Diameter Adjustment Mechanism ● Replaceable Stainless Steel Blades 1 135 11-Piece Color-Coded Hex Key Set, Imperial ● Color Coded for Easily Distinguishable Sizes ● Exposed Ends for Usual Hex Key Fit ● 90 degree Bend, Black Oxide Finish ● Engraved Holder Included 2 136 Ø25 mm Post Spacer and 1/4-20 Setscrew Kit ● Solid Stainless Steel Construction ● Large Diameter Relief Cut on Top and Bottom of Spacers for Additional Mounting Stability Includes: ● Ø25 mm Post Spacer, 1 mm Thick Qty. 5 Ø25 mm Post Spacer, 7 mm Thick Qty. 1 ● Ø25 mm Post Spacer, 2 mm Thick Qty. 5 Ø25 mm Post Spacer, 8 mm Thick Qty. 1 ● Ø25 mm Post Spacer, 3 mm Thick Qty. 5 Ø25 mm Post Spacer, 9 mm Thick Qty. 1 ● Ø25 mm Post Spacer, 4 mm Thick Qty. 5 Ø25 mm Post Spacer, 10 mm Thick Qty.5 ● Ø25 mm Post Spacer, 5 mm Thick Qty. 5 1/4-20 Setscrew, 7/8 Long Qty. 25 ● Ø25 mm Post Spacer, 6 mm Thick Qty. 1 1/4-20 Setscrew, 1 Long Qty. 25 1 137 High-dynamics tip/tilt platform, 35 mrad, strain gauge sensors, D-sub connector, incl. mirror Ø 12.5 mm ● Active axes θX, θY ● Integrated sensor SGS ● Tip/tilt angle, closed loop (static motion at 0 to 120 V) ±17.5 mrad ● Resolution, open loop 0.1 μrad ● Resolution, closed loop 1.0 μrad ● Linearity 0.05 (unidirectional) % ● Repeatability 1 (bidirectional) μrad ● Resonant frequency, under load, with Ø 12.5 mm × 3 mm quartz glass mirror 1.6 kHz ● Gap between the center of rotation and platform surface 3.3 mm ● Drive properties ● Ceramic type PICMA® P-885 ● Electrical capacitance per axis 6.2 μF ● Operating temperature range -20 to 80 °C ● Material platform Titanium ● Mass (with cable and connector) 325 g ● Cable length 2 m ● Sensor/voltage connection Sub-D 37 (m) 1 138 Digital multi-channel piezo controller, 3 axes, -30 to 130 V, strain gauge sensors, D-sub 37 socket, analog inputs Axes: 3 Processor: DSP 32/64- bit, floating point, 375 MHz Sampling rate, servo-control 25 kHz Sensor: Sensor type Strain gauge, piezoresistive sensors Sensor resolution 20 at 1 kSPS oversampling bit Sensor bandwidth (-3 dB) 6 kHz max. Sensor channels 3 Amplifier Output voltage -30 to 130 V Amplifier channels 4 Amplifier bandwidth 6.5 kHz Interface and operation Interface / communication Ethernet, USB, RS-232, serial SPI high- speed interface Piezo / sensor connection Sub- D Special Command set PI General Command Set (GCS) Linearization 4th order polynomials, DDL (Dynamic Digital Linearization) Miscellaneous Overtemp protection Max. 71 °C, deactivation of the piezo voltage output Dimensions 263 × 89 × 302 mm Mass 3 kg approx. Operating voltage 24 VDC from external power supply (included) CCD Camera: (Quantity 01) 1. CCD Sensor 1.1. Sensor Type: Scientific Interline CCD (Monochrome) 1.2. CCD Array: 1360 x 1024 1.3. Pixel Size: 6.45μm x 6.45μm 1.4. Sensor Dimensions: 8.8mm x 6.6mm (11mm diagonal) 1.5. Peak Quantum Efficiency: 75% at 600nm 1.6. Full Well Capacity: >11,000e- single pixel 2. Camera 2.1. Digital Output: 14-bit with 50MHz readout 2.2. Digitization Rate: USB3: 50MHz high frame rate 2.3. Read Noise (typical): <5.5e- RMS with 50MHz readout 2.4. Frame Rate: 22 fps (full resolution) 31 fps (binned 2x2) 2.5. Exposure Time Range: 25μs - 5 sec 2.6. Supported Binning Modes: 1x1, 2x2, 4x4, 6x6, 8x8, 12x12, 16x16 2.7. Dark Current Rate (typical): 0.036 e/p/s at +15oC regulated 2.8. Sensor Cooling: 0oC stabilized at 22oC ambient Thermoelectric cooling with convection 2.9. Intelligent Quantification Features: DPC- Defective Pixel Correction 3. Interfacing 3.1. Computer Platforms/ Operating Systems: Windows 7 (64 bit), Windows 8 (64 bit), Windows 10 (64 bit), Windows 11. 3.2. Digital Interface: USB3.0 3.3. Triggering I/O Signals: Trigger In, Expose Out, End-of-Frame, Shutter Out 3.4. Supported Triggering Modes: Trigger First, Strobe, Bulb 4. Mechanical 4.1. Optical Interface: 1”, C-mount optical format 4.2. Mounting Hole Thread Size: 1/4” - 20 thread, 4 sides 4.3. Camera Dimensions: 98.4mm x 76mm x 76mm (length x width x height) 4.4. Weight: 1.55lb, 0.72kg 4.5. Power Requirement: 7.5V DC, 2.5A 1 SLD Light Source ● Center wavelength (nm) 795 ± 5 ● Spectral width, FWHM (nm) Min. 13 Typ. 15 ● Output power, SM (mW) Min. 15.0 Typ. 20.0 1 2 Light Source ● Output power, Pop, ex SM fiber, 12.0 mW typ. ● Forward current at Pop, 200 mA typ. ● Central wavelength at Pop, 840 nm typ ● Spectrum width at Pop, FWHM, 25 nm typ. ● Slow / fast polarization ratio (PM modules) at Pop, 10 dB typ. ● SLD forward voltage at Pop, 2.6 V ● Operating temperature at Pop, -20 °C to +65°C ● Cooler current, 2.5 A 1 3 Array of refractive positive orthogonal microlenses ● Material fused silica ● Pitch P=240um ● Radius R=4.0mm ● Focus F=8.75mm (at 633nm) (a) Size: diameter D=10mm x 1mm ( 5 Qty.) (b) Size: diameter D=10mm x 3mm (5 Qty.) 01 Optical Grade cotton-tipped applicators, 100 per pack 10 02 Screw-on cable straps (quantity 15) 02 03 Lens tissues, 25 sheets per booklet, 50 booklet in a box 1 Cage Assembly Rod, 6 Long, Ø6 mm, 4 Pack ● Ø6 mm Precision-Ground Stainless Steel ● 4-40 Removable Setscrew at Both Ends 6 2 Cage Assembly Rod, 12 Long, Ø6 mm ● Ø6 mm Precision-Ground Stainless Steel ● 4-40 Removable Setscrew at Both Ends 6 3 Cage Assembly Rod, 1/2 Long, Ø6 mm, 4 Pack ● Ø6 mm Precision-Ground Stainless Steel ● 4-40 Removable Setscrew at Both Ends 4 4 Cage Assembly Rod, 2 Long, Ø6 mm, 4 Pack ● Ø6 mm Precision-Ground Stainless Steel ● 4-40 Removable Setscrew at Both Ends 4 5 Cage Assembly Rod, 8 Long, Ø6 mm, 4 Pack ● Ø6 mm Precision-Ground Stainless Steel ● 4-40 Removable Setscrew at Both Ends 4 6 Cage Assembly Rod, 1/4 Long, Ø6 mm ● Ø6 mm Precision-Ground Stainless Steel ● 4-40 Removable Setscrew at Both Ends 12 7 Cage Assembly Rod, 4 Long, Ø6 mm, 4 Pack ● Ø6 mm Precision-Ground Stainless Steel ● 4-40 Removable Setscrew at Both Ends 3 8 Cage Assembly Rod, 1 Long, Ø6 mm, 4 Pack ● Ø6 mm Precision-Ground Stainless Steel ● 4-40 Removable Setscrew at Both Ends 4 9 30 mm Cage Mounting Bracket ● Compatible with 30 mm Cage Systems ● Brackets Offer Clearance for SM1 Lens Tubes 12 10 SM1-Threaded 30 mm Cage Plate, 0.35 Thick, 2 Retaining Rings, 8-32 Tap ● Post Mountable via 8-32 (M4) Tapped Hole ● 0.35 Thick ● Directly Mounts Optical Components Within a 30 mm Cage ● System Assembly 18 11 Internally SM1-Threaded End Cap ● black-anodized aluminum end caps used to seal off a Ø1 lens tube ● It has internal SM1 (1.035-40) threads to seal the end of an externally SM1-threaded lens tube 6 12 Ø1 Slip-On Post Clamp, 1/4-20 Tap, 1/4 Counterbore ● Clamping Feature Setscrew w/ 5/64 (2.0 mm) Hex ● Tapped Hole 1/4-20 4 13 5/64 (2 mm) Hex Key Thumbscrew, 4 Pack ● Red Anodized Adjustment Knob with Engraved Hex Size 1 14 Ø1 Slip-On Post Clamp, 8-32 Tap, 8-32 Threaded Stud ● Clamping Feature Setscrew w/ 5/64 (2.0 mm) Hex ● Tapped Hole 8-32 2 15 Ø1 Unthreaded Adapter for Ø11 mm Cylindrical Components ● Length 0.48 ● Smooth 1 (25.4 mm) Outer Diameter ● Two Setscrews Secure Collimator in Adapter 6 16 5 VDC, 2 A Regulated Power Supply with USB Type-A Port, 100/240 VAC ● 5 VDC Regulated Power Supply ● USB Type-A Port 2 17 SM1-Threaded Adapter for Ø11 mm, ≥0.35 (8.9 mm) Long Cylindrical Components ● External SM1 (1.035-40) Threads ● Setscrews Secure Component in Adapter ● Length 0.59 6 18 SM1 Lens Tube, 0.30 Thread Depth, SM1RR Retaining Ring, 5 Pack ● Stackable Design Enables Multi-Element Optical Systems ● SM1-Threaded (1.035-40) Bore Accepts Ø1 (Ø25.4 mm) Optics ● Internal Thread Depth 0.30 (7.6 mm) 3 19 Ø1/2 Optical Post, SS, 8-32 Setscrew, 1/4-20 Tap, L = 4, 5 Pack ● One 8-32 Tapped Hole on Top and One 1/4- 20 Tapped ● Hole at Base ● Removable Double-Ended 8-32 Setscrew 1 20 SM1 Lens Tube, 2.00 Thread Depth, SM1RR Retaining Ring, 5 Pack ● Stackable Design Enables Multi-Element Optical Systems ● SM1-Threaded (1.035-40) Bore Accepts Ø1 (Ø25.4 mm) Optics ● Internal Thread Depth 2.00 (50.8 mm) 1 21 30 mm Cage Plate, Ø1.2 Double Bore for SM1 and CMount Lens Tubes ● Ø1.2 Bore Supports Outside Diameter of SM1 Lens Tubes and C-Mount Extension Tubes ● Compatible with 30 mm Cage Systems ● Nylon-Tipped Setscrew and Double Bore Securely Hold Lens Tubes ● Not Post Mountable 5 22 Externally SM1-Threaded End Cap ● Black-anodized aluminum end caps used to seal off a Ø1 lens tube. ● It has external SM1 threads to seal the end of an internally ● SM1-threaded lens tube 3 23 Extension Tube, Internal SM1 Threading of 3 Depth, External C-Mount Threading, One Retaining Ring Included ● SM1 Thread Depth 3.00 (76.2 mm) ● One Retaining Ring Included 9 24 Kinematic Mount with Vertical Drive, Ø1 Optics, 8-32 Taps ● Mounts Ø1 Optics ● Minimum Optic Thickness: 0.11 ● Total Angular Range of ±3° ● 0.25° per Revolution Adjustment ● Graduated Knobs with 50 Divisions per Revolution ● 8-32 Mounting Holes 25 Complete 1 x 1 Kinematic Base, Top and Bottom Plates, #8 Counterbores ● Ball and V-Groove Design Allows High- Precision Positioning ● Bottom Plate has a #8 Counterbore 3 26 4-40 Cap Screw and Hardware Kit for Mini-Series ● 4-40 SS Cap Screw, Thread Length: 3/16 Approx. Qty. 165 ● 4-40 SS Nut Approx. Qty. 200 ● 4-40 SS Cap Screw, Thread Length: 1/4 Approx. Qty. 135 ● #4 SS Washer, Outer Diameter: 0.313 Approx. Qty.350 ● 4-40 SS Cap Screw, Thread Length: 5/16 Approx. Qty. 135 ● 3/32 Hex Key for 4-40 Cap Screws Approx. Qty. 10 ● 4-40 SS Cap Screw, Thread Length: 3/8 Approx. Qty. 125 ● 0.050 Hex Key for 4-40 Setscrews Approx. Qty. 10 ● 4-40 SS Setscrew, 1/4 Long Approx. Qty. 190 1 27 Large Goniometer, 1.75 Distance to Point of Rotation, ±5° ● Distance to Point of Rotation from Top Surface 1.75 ● Rotation ±5° ● Accuracy 10 arcmin (0.167°) ● Load Capacity 1.0 lb (0.45 kg) ● Goniometer Dimensions (W x D x H) 1.50 x 1.50 x 0.75 ● Base Plate Dimensions (W x D x H) 1.50 x 2.50 x 0.20 ● Base Plate Mounting Features Two 1/4 Clearance Slots 1 28 Ø2 Manual Rotation Stage ● 360° Continuous Rotation ● Laser-Engraved Graduation Marks at 2° Increments and Witness Line ● Mounting Platform Height: 0.63 ● Four 1/4 Clearance Holes to Mount to Optical Tables or Breadboards 1 29 SM1 (1.035-40) Coupler, External Threads, 0.5 Long, Two Locking Rings ● Included Two Locking Rings ● Lens Tube Separation Range 0.22 - 0.34 ● Length 1.0 1 30 30 mm Cage System, XY Translating Mount for Ø1 Optics with Quick Release Plate ● Accepts Ø1.00 Optics ● ±1 mm Travel in X and Y via 3/16-100 Adjusters ● Drive 100 Threads per Inch (TPI) Adjusters ● Optic Mounting SM1 (1.035-40) Thread 31 30 mm Cage System, XY Translating Lens Mount for Ø1 Optics ● Accepts Ø1.00 (Ø25.4 mm) Optics up to 0.39 (10.0 mm) Thick ● ±1 mm Travel in X and Y via 3/16-100 Adjusters ● Drive 100 Threads per Inch (TPI) Adjusters ● Optic Mounting SM1 (1.035-40) Thread 1 32 1/2 Travel Manual Translation Stage for 30 mm Cage Systems ● Includes 1/2 (13 mm) Travel Micrometer with 0.001 (10 μm) per Graduation ● Precision Linear Ball Bearings ● Lockable Design 3 33 SM1 Lens Tube, 1.00 Thread Depth, One Retaining Ring Included ● Stackable Design Enables Multi-Element Optical Systems ● SM1-Threaded (1.035-40) Bore Accepts Ø1 (Ø25.4 mm) Optics ● Internal Thread Depth 1.00 (25.4 mm) 10 34 Ø1 Mounted Pinhole, 1000 ± 10 μm Pinhole Diameter, Stainless Steel ● Foil Material 300 Series Stainless Steel, ● Black-Oxide Conversion Coating ● Housing Material 6061-T6 Aluminum ● Pinhole Diameter 1 mm ● Foil Thickness 50 μm 2 35 SM1 Graduated Ring-Actuated Iris Diaphragm (Ø1.0 - Ø12.0 mm) ● SM1 (1.035-40) Threaded on Both Sides ● Ring-Controlled, Ø12.0 mm Max Aperture ● Black Spring Steel Leaves ● Locking Setscrew with 0.05 (1.3 mm) Hex 4 36 6-Axis Locking Kinematic Mount for Ø1 Optics ● Independent X, Y, and Continuous 360° Roll Adjustment ● Optic Cell Threading SM1 (1.035-40) ● Max Optic Thickness 0.57 (14.6 mm) ● Pitch/Yaw Adjust (Resolution) ±4° (5 mrad/rev) ● X/Y Adjust (Resolution) ±2 mm (254 μm/rev) ● Z Adjust (Resolution) ±3.2 mm (318 μm/rev) 1 37 Cage Rotation Mount for Ø1 Optics, SM1 Threaded, 8- 32 Tap ● 360° of Continuous Rotation, Lockable ● 2° Graduations on Dial, Labeled Every 20° ● Maximum Optic Thickness: 0.37 6 38 SMA Fiber Adapter Plate with External SM1 (1.035-40) Threads ● Threading External SM1 (1.035-40) ● Connector Type SMA 1 39 30 mm Removable Segment Cage Plate, 0.35 Thick, 8- 32 Mounting Holes ● Build Removable Cage Segments for 30 mm Cage Systems ● Accepts Ø6 mm Cage Rods ● Flexure Cam Lock Design Allows Cage Segment Removal ● SM1 (1.035-40) Internal Thread ● Two Retaining Rings Included 40 SM1 Retaining Ring for Ø1 Lens Tubes and Mounts ● Thread SM1 (1.035-40) ● Thickness 0.08 (2.0 mm) ● Clear Aperture Ø0.90 (Ø22.9 mm) 4 41 SM1 to M12 x 0.5 Lens Cell Adapter ● Adapter Type Thread-to-Thread Adapter ● External Threading SM1 (1.035-40) 4 42 Adapter with External C-Mount Threads and Internal SM1 Threads, 4.4 mm Spacer ● External Threads C-Mount (1.00-32) ● Internal Threads SM1 (1.035-40) 2 43 Ø3 Precision Kinematic Mirror Mount, 2 Adjusters ● Optics Secured in Double-Bored Hole with Nylon-Tipped Setscrew ● Thick Back Plate and Heavy-Duty Springs for Stability ● Fabricated from Black Anodized Aluminum ● Hardened Stainless Steel Inserts at Kinematic Contacts ● Reduce Wear ● Minimum Optic Thickness 0.28 (7.1 mm) ● Optical Axis Height 2.13 (54.1 mm) ● Adjuster Thread 1/4-80 2 44 Compact Rotation Stage with Fine Adjustment, 8-32 and 4-40 Taps ● Coarse Rotation Range 360°, Continuous ● Fine Adjustment Range ±6° ● Horizontal Load Capacity Overall: 25 lbs (11.4 kg) ● Fine Adjustment: 3.75 lbs (1.7 kg) ● Platform Diameter 1.00 (25.4 mm) ● Platform Height 0.75 (19.1 mm) ● Platform Mounting Holes 8-32 (1 Place) 4-40 (8 Places) ● Base Dimensions 1.50 x 1.50 (38.1 mm x 38.1 mm) 1 45 1.92 x 1.92 Kinematic Platform Mount ● Tapped Holes 6-32 (5 Places) ● Adjuster Thread 1/4-80 ● Angular Range ±4° 4 46 Ø35 mm Aperture, 30 mm Cage Plate, 0.35 Thick, 8-32 Tap ● Designed with the Largest Possible Clear Aperture (Ø35 mm) ● Compatible with 30 mm Cage Systems ● Nylon-Tipped Setscrew and Double Bore Securely Hold Lens Tubes ● Post Mountable with an 8-32 Tapped Hole 6 47 Rotation Mount for Ø1/2 Optics to Use with above stage ● Coarse Rotation: 360° Continuously Adjustable ● Graduations: 2° Increments ● Mount Ø1/2 Optics up to 7.3 mm (0.29) Thick ● Runout: <0.0001 (25 μm) Along Optical Axis ● Max. Clear Aperture: 0.43 ● Lockable Design 6 48 Compact Electronics Housing, In-Line BNC, Ø0.63 × 2.61 ● Ø0.63 × 2.61 In-Line BNC Feedthrough Housing ● Compatible with Off-the-Shelf Electronic Elements ● Accepts 10 mm x 15 mm PCB ● Male and Female BNC Connectors ● Blank Area to Label Custom Circuits 49 SM30 Retaining Ring for Ø30 mm Lens Tubes and Mounts ● Thread SM30 (M30.5 x 0.5) ● Thickness 0.08 (2.0 mm) ● Clear Aperture Ø1.10 (Ø27.9 mm) 10 50 Adapter with External SM1 Threads and Internal SM30 Threads, 0.29 Long ● External Threads SM1 (1.035-40) ● Internal Threads SM30 (M30.5 x 0.5) 6 51 FC/APC Fiber Adapter Plate with External SM05 (0.535- 40) Threads, Wide Key (2.2 mm) ● Connector Type FC/APC, 2.2 mm Wide Key ● Threading External SM05 (0.535-40) 9 52 SM30 Lens Tube, 1 Thread Depth, One Retaining Ring Included ● Internal Thread Depth 1.00 (25.4 mm) ● Stackable Design Enables Construction of Multi-Element Optical Systems ● SM30-Threaded (M30.5 x 0.5) Bore Accepts Ø30 mm Optics ● Compatible with All SM30-Threaded Components 6 53 30 mm Rotating Cage Segment Plate, Two SM1RR Retaining Rings Included, Imperial ● Rotates an Entire 30 mm Cage System Subassembly ● Around a Fixed SM1-Threaded Bore ● Post Mountable via 8-32 Tapped Hole ● Rotation Locked with Flexure Mechanism 1 54 Cage Rotation Mount for Ø1 Optics, SM1 Threaded, 8- 32 Tap ● 360° of Continuous Rotation, Lockable ● 2° Graduations on Dial, Labeled Every 20° ● Maximum Optic Thickness: 0.37 3 55 FC/APC Fiber Adapter Plate with External SM1 (1.035- 40) Threads, Wide Key (2.2 mm) ● Connector Type FC/APC, 2.2 mm Wide Key ● Threading External SM1 (1.035-40) 3 56 Blank 30 mm Cage Plate, 0.35 Thick, 8-32 Tap ● Ideal for Custom Machining to Mount Non- Standard Components ● Designed for 30 mm Cage System ● Post-Mountable via 8-32 Tapped Hole ● Black-Anodized Aluminum 2 57 SM05-Threaded 30 mm Cage Plate, 0.35 Thick, Two Retaining Rings, 8-32 Tap ● Directly Mounts Ø1/2 Optical Components Within a 30 mm ● Cage System Assembly ● 0.35 Thick ● Tapped with Our Standard SM05 Thread (0.535-40) ● Post Mountable via 8-32 Tapped Hole 3 58 Ø1/2 Universal Post Holder, Spring Loaded Locking Thumbscrew, L = 2 ● Base Swivels 360° for Mounting Convenience ● Post can Pass Through Base, Enabling Minimum Beam Height ● Magnets in Base Provide Holding Force Prior to Fastening to an Optical Table ● Spring-Loaded Hex Locking Thumbscrews for Positioning Ease 59 Ø1/2 Optical Post, SS, 8-32 Setscrew, 1/4-20 Tap, L = 2 ● One 8-32 Tapped Hole on Top and One 1/4- 20 Tapped ● Hole at Base ● Removable Double-Ended 8-32 Setscrew 5 60 Ø3 Precision Kinematic Mirror Mount, 2 Adjusters ● Optics Secured in Double-Bored Hole with Nylon-Tipped Setscrew ● Thick Back Plate and Heavy-Duty Springs for Stability ● Fabricated from Black Anodized Aluminum ● Hardened Stainless Steel Inserts at Kinematic Contacts ● Reduce Wear ● Minimum Optic Thickness 0.28 ● Optical Axis Height 2.13 ● Angular Adjustment ±4º ● AdjusterThread 1/4-80 3 61 Fine Hex Adjuster, 1/4-80, 3/4 Long ● Adjusters Manufactured from 303 Stainless Steel ● 80 TPI Fine Adjustment 1 62 Small Goniometer with 1 Distance to Point of Rotation, ±10° ● Rotation ±10° ● Accuracy 10 arcmin (0.167°) ● Load Capacity 0.25 lbs (0.113 kg) ● Goniometer Dimensions (W x D x H) 1.00 x 1.00 x 0.50 ● Base Plate Dimensions (W x D x H) 1.00 x 1.85 x 0.20 ● Base Plate Mounting Features Two #4 Clearance Slots and ● One 8-32 Threaded Hole Below the Stage 2 63 Spanner Wrench for SM1-Threaded Retaining Rings, Graduated Scale with 0.02 (0.5 mm) Increments, Length = 3.88 ● Knurled Handle for Improved Grip ● Feature Engraved Scale 2 64 0.050 (1.3 mm) Hex Key Thumbscrew, 4 Pack ● Convenient Adjustment of Hex-Driven Actuators and Quick Component Assembly ● Red Anodized Adjustment Knob with Engraved Hex Size 2 65 Soft Jaw Pliers, Ø1/2 to Ø2.5 ● Ideal for Tightening and Loosening Ø1/2, Ø1, Ø30 mm, and Ø2 Lens Tubes ● Non-Marring, Smooth, Urethane Jaw Design ● Four Available Adjustment Positions 2 66 9/64 Hex Key Thumbscrew, 4 Pack ● Convenient Adjustment of Hex-Driven Actuators and Quick ● Component Assembly ● Red Anodized Adjustment Knob with Engraved Hex Size ● Replaceable Hex Tip 2 67 7-Piece Precision Screwdriver Set ● Superior Design for Maximum Control, Accuracy, and Durability ● Chrome-Molybdenum Vanadium Steel Blades ● Fast-Turning Swivel Caps with Cavity for Precision Centering ● No-Roll Handle Design 2 68 Digital Calipers ● Measurement Range 6.00 (150 mm) ● Resolution 10 μm (0.0005) ● Accuracy ±25.4 μm (±0.001) ● Contact Points Carbide-Tipped 69 Spanner Wrench for SM30-Threaded Retaining Rings, Length = 4.35 ● Individual Sizes for Standard Retaining Rings ● Knurled Handle for Improved Grip 2 70 Spanner Wrench for SM05-Threaded Retaining Rings, Graduated Scale with 0.02 (0.5 mm) Increments, Length = 3.88 ● Feature Engraved Scale ● Individual Sizes for Standard Retaining Rings ● Knurled Handle for Improved Grip 2 71 Spanner Wrench for SM1.5-Threaded Retaining Rings, Graduated Scale with 0.02 (0.5 mm) Increments, Length = 3.88 ● Feature Engraved Scale ● Individual Sizes for Standard Retaining Rings ● Knurled Handle for Improved Grip 2 72 Spanner Wrench for SM2-Threaded Retaining Rings, Length = 4.35 ● Length = 4.35 ● Individual Sizes for Standard Retaining Rings ● Knurled Handle for Improved Grip 2 73 30 mm Removable Cage Plate, Front and Back Plate, Internal SM1 Threading ● 30 mm Cage Compatible Back Plate ● Magnetically Coupled Mounting Carriage ● Accepts Ø1 (25.4 mm) Optics up to 0.20 (5.1 mm) Thick ● Back Plate and Mounting Carriage Have Internal SM1 Threading ● One Retaining Ring Included 2 74 SM1 Lens Tube, 3.00 Thread Depth, One Retaining Ring Included ● Stackable Design Enables Multi-Element Optical Systems ● SM1-Threaded (1.035-40) Bore Accepts Ø1 (Ø25.4 mm) Optics ● Internal Thread Depth 3.00 (76.2 mm) 3 75 f=19 mm, Ø1/2 Achromatic Doublet, SM05- Threaded Mount, ARC: 400-700 nm ● AR Coating Range 400 - 700 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter Tolerance +0.00/-0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley) λ/4 ● Centration ≤3 arcmin ● Clear Aperture >90% of Diameter ● Damage Thresholdd Pulsed 0.5 J/cm2 (532 nm, 10 ns Pulse, 10 Hz, Ø0.566 mm) CW 300 W/cm (532 nm, Ø1.000 mm) ● Materials N-BAF10/N-SF6HT ● Mounting Thread SM05 (0.535-40) 76 f=19 mm, Ø1/2 Achromatic Doublet, SM05- Threaded Mount, ARC: 650-1050 nm ● AR Coating Range 650 - 1050 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter Tolerance +0.00 / -0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley) λ/4 at 632.8 nm ● Centration <3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulse 5 J/cm2 (810 nm, 10 ns pulse, 10 Hz, 0.155 mm) CW 1000 W/cm (1070 nm, Ø0.971 mm) ● Materials N-BAF10/N-SF6HT ● Mounting Thread SM05 (0.535-40) 2 77 f=50 mm, Ø1 Achromatic Doublet, SM1- Threaded Mount, ARC: 400-700 nm ● AR Coating Range 400 - 700 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter Tolerance +0.00/-0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley)c λ/4 ● Centration ≤3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulsed 0.5 J/cm2 (532 nm, 10 ns Pulse, 10 Hz, Ø0.566 mm) ● CW 300 W/cm (532 nm, Ø1.000 mm) ● Operating Temperature -40 °C to 85 °C ● Lens Diameter (mm) 25.4 ● Mounting Thread SM1 (1.035-40) ● Materials N-BAF10/N-SF10 2 78 f=50 mm, Ø1 Achromatic Doublet, SM1- Threaded Mount, ARC: 650-1050 nm ● AR Coating Range 650 - 1050 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter 1 ● Diameter Tolerance +0.00 / -0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley) λ/4 at 632.8 nm ● Centration <3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulse 5 J/cm2 (810 nm, 10 ns pulse, 10 Hz, 0.155 mm) ● CW 1000 W/cm (1070 nm, Ø0.971 mm) ● Operating Temperature -40 °C to +85 °C ● Mounting Thread SM1 (1.035-40) ● Materials N-LAK22/N-SF6HT 2 79 f=75 mm, Ø1 Achromatic Doublet, SM1- Threaded Mount, ARC: 400-700 nm ● AR Coating Range 400 - 700 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter Tolerance +0.00/-0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley)c λ/4 ● Centration ≤3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulsed 0.5 J/cm2 (532 nm, 10 ns Pulse, 10 Hz, Ø0.566 mm) ● CW 300 W/cm (532 nm, Ø1.000 mm) ● Operating Temperature -40 °C to 85 °C ● Lens Diameter (mm) 25.4 ● Mounting Thread SM1 (1.035-40) ● Materials N-BK7/SF5 80 ● f=75 mm, Ø1 Achromatic Doublet, SM1- Threaded Mount, ARC: 650-1050 nm ● AR Coating Range 650 - 1050 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter 1 ● Diameter Tolerance +0.00 / -0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley) λ/4 at 632.8 nm ● Centration <3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulse 5 J/cm2 (810 nm, 10 ns pulse, 10 Hz, 0.155 mm) ● CW 1000 W/cm (1070 nm, Ø0.971 mm) ● Operating Temperature -40 °C to +85 °C ● Mounting Thread SM1 (1.035-40) ● Materials N-BAF10/N-SF6HT 2 81 f=80 mm, Ø1 Achromatic Doublet, SM1- Threaded Mount, ARC: 400-700 nm ● AR Coating Range 400 - 700 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter Tolerance +0.00/-0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley)c λ/4 ● Centration ≤3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulsed 0.5 J/cm2 (532 nm, 10 ns Pulse, 10 Hz, Ø0.566 mm) ● CW 300 W/cm (532 nm, Ø1.000 mm) ● Operating Temperature -40 °C to 85 °C ● Lens Diameter (mm) 25.4 ● Mounting Thread SM1 (1.035-40) ● Materials N-BK7/N-SF5 2 82 f=80 mm, Ø1 Achromatic Doublet, SM1- Threaded Mount, ARC: 650-1050 nm ● AR Coating Range 650 - 1050 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter 1 ● Diameter Tolerance +0.00 / -0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley) λ/4 at 632.8 nm ● Centration <3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulse 5 J/cm2 (810 nm, 10 ns pulse, 10 Hz, 0.155 mm) ● CW 1000 W/cm (1070 nm, Ø0.971 mm) ● Operating Temperature -40 °C to +85 °C ● Mounting Thread SM1 (1.035-40) ● Materials N-BAF10/N-SF6HT 2 83 f=100 mm, Ø1 Achromatic Doublet, SM1- Threaded Mount, ARC: 400-700 nm ● AR Coating Range 400 - 700 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter Tolerance +0.00/-0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley)c λ/4 ● Centration ≤3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulsed 0.5 J/cm2 (532 nm, 10 ns Pulse, 10 Hz, Ø0.566 mm) ● CW 300 W/cm (532 nm, Ø1.000 mm) ● Operating Temperature -40 °C to 85 °C ● Lens Diameter (mm) 25.4 ● Mounting Thread SM1 (1.035-40) ● Materials N-BK7/SF5 84 f=100 mm, Ø1 Achromatic Doublet, SM1- Threaded Mount, ARC: 650-1050 nm ● AR Coating Range 650 - 1050 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter 1 ● Diameter Tolerance +0.00 / -0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley) λ/4 at 632.8 nm ● Centration <3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulse 5 J/cm2 (810 nm, 10 ns pulse, 10 Hz, 0.155 mm) ● CW 1000 W/cm (1070 nm, Ø0.971 mm) ● Operating Temperature -40 °C to +85 °C ● Mounting Thread SM1 (1.035-40) ● Materials N-LAK22/N-SF6HT 5 85 f=125 mm, Ø1 Achromatic Doublet, SM1- Threaded Mount, ARC: 400-700 nm ● AR Coating Range 400 - 700 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter Tolerance +0.00/-0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley)c λ/4 ● Centration ≤3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulsed 0.5 J/cm2 (532 nm, 10 ns Pulse, 10 Hz, Ø0.566 mm) ● CW 300 W/cm (532 nm, Ø1.000 mm) ● Operating Temperature -40 °C to 85 °C ● Lens Diameter (mm) 25.4 ● Mounting Thread SM1 (1.035-40) ● Materials N-BK7/N-SF5 5 86 f=125 mm, Ø1 Achromatic Doublet, SM1- Threaded Mount, ARC: 650-1050 nm ● AR Coating Range 650 - 1050 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter 1 ● Diameter Tolerance +0.00 / -0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley) λ/4 at 632.8 nm ● Centration <3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulse 5 J/cm2 (810 nm, 10 ns pulse, 10 Hz, 0.155 mm) ● CW 1000 W/cm (1070 nm, Ø0.971 mm) ● Operating Temperature -40 °C to +85 °C ● Mounting Thread SM1 (1.035-40) ● Materials N-BK7/N-SF8 5 87 f=150 mm, Ø1 Achromatic Doublet, SM1- Threaded Mount, ARC: 400-700 nm ● AR Coating Range 400 - 700 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter Tolerance +0.00/-0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley)c λ/4 ● Centration ≤3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulsed 0.5 J/cm2 (532 nm, 10 ns Pulse, 10 Hz, Ø0.566 mm) ● CW 300 W/cm (532 nm, Ø1.000 mm) ● Operating Temperature -40 °C to 85 °C ● Lens Diameter (mm) 25.4 ● Mounting Thread SM1 (1.035-40) ● Materials N-BK7/SF5 88 f=150 mm, Ø1 Achromatic Doublet, SM1- Threaded Mount, ARC: 650-1050 nm ● AR Coating Range 650 - 1050 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter 1 ● Diameter Tolerance +0.00 / -0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley) λ/4 at 632.8 nm ● Centration <3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulse 5 J/cm2 (810 nm, 10 ns pulse, 10 Hz, 0.155 mm) ● CW 1000 W/cm (1070 nm, Ø0.971 mm) ● Operating Temperature -40 °C to +85 °C ● Mounting Thread SM1 (1.035-40) ● Materials N-LAK22/N-SF6HT 5 89 f=200 mm, Ø1 Achromatic Doublet, SM1- Threaded Mount, ARC: 400-700 nm ● AR Coating Range 400 - 700 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter Tolerance +0.00/-0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley)c λ/4 ● Centration ≤3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulsed 0.5 J/cm2 (532 nm, 10 ns Pulse, 10 Hz, Ø0.566 mm) ● CW 300 W/cm (532 nm, Ø1.000 mm) ● Operating Temperature -40 °C to 85 °C ● Lens Diameter (mm) 25.4 ● Mounting Thread SM1 (1.035-40) ● Materials N-SSK5/LAFN7 5 90 f=200 mm, Ø1 Achromatic Doublet, SM1- Threaded Mount, ARC: 650-1050 nm ● AR Coating Range 650 - 1050 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter 1 ● Diameter Tolerance +0.00 / -0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley) λ/4 at 632.8 nm ● Centration <3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulse 5 J/cm2 (810 nm, 10 ns pulse, 10 Hz, 0.155 mm) ● CW 1000 W/cm (1070 nm, Ø0.971 mm) ● Operating Temperature -40 °C to +85 °C ● Mounting Thread SM1 (1.035-40) ● Materials N-LAK22/N-SF10 5 91 f=250 mm, Ø1 Achromatic Doublet, SM1- Threaded Mount, ARC: 400-700 nm ● AR Coating Range 400 - 700 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter Tolerance +0.00/-0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley)c λ/4 ● Centration ≤3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulsed 0.5 J/cm2 (532 nm, 10 ns Pulse, 10 Hz, Ø0.566 mm) ● CW 300 W/cm (532 nm, Ø1.000 mm) ● Operating Temperature -40 °C to 85 °C ● Lens Diameter (mm) 25.4 ● Mounting Thread SM1 (1.035-40) ● Materials N-BK7/SF2 92 f=250 mm, Ø1 Achromatic Doublet, SM1- Threaded Mount, ARC: 650-1050 nm ● AR Coating Range 650 - 1050 nm ● Reflectance Over AR Coating Range (0° AOI) Ravg < 0.5% ● Diameter 1 ● Diameter Tolerance +0.00 / -0.10 mm ● Focal Length Tolerance ±1% ● Surface Quality 40-20 Scratch-Dig ● Spherical Surface Power 3λ/2 ● Spherical Surface Irregularity (Peak to Valley) λ/4 at 632.8 nm ● Centration <3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulse 5 J/cm2 (810 nm, 10 ns pulse, 10 Hz, 0.155 mm) ● CW 1000 W/cm (1070 nm, Ø0.971 mm) ● Operating Temperature -40 °C to +85 °C ● Mounting Thread SM1 (1.035-40) ● Materials SF5/N-SF6HT 5 93 Ø1 Protected Silver Mirror, 10 Pack ● Thickness 6.0 mm (0.24) ● Thickness Tolerance ±0.2 mm ● Reflectance (Average) >97% for 450 nm - 2 μm, >95% for 2-20 μm ● Substrate Fused Silica ● Surface Flatness (Peak to Valley) λ/10 @ 633 nm ● Surface Quality 40-20 Scratch-Dig ● Parallelism <3 arcmin ● Clear Aperture >90% of Diameter ● Damage Threshold Pulsed 0.225 J/cm2 (800 nm, 99 fs, 1 kHz, Ø0.167 mm) 1 J/cm2 (1064 nm, 10 ns, 10 Hz, Ø1.010 mm) CW: 500 W/cm (1.07 μm, Ø0.974 mm) 1500 W/cm (10.6 μm, Ø0.339 mm) 2 94 Box with 10 Reflective ND Filters, Ø25 mm, SM1 Mounted, 350 - 1100 nm ● Included Optical Densities 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 1.0, 2.0, 3.0, 4.0 ● Inconel Coated Ø25 mm SM1 Mounted Filters ● Substrate N-BK7 ● Front Surface Coating Inconel ● Spectral Range 350 - 1100 nm ● Unmounted Optic Diameter Ø25.0 +0.00/- 0.20 mm ● Unmounted Optic Thickness 1.0 ± 0.10 mm (unmounted) ● Clear Aperture 90% of Optic Diameter ● Surface Quality 40-20 Scratch-Dig ● Surface Flatness <2λ ● Parallelism <3 arcsec 2 95 Compact Laser Module with USB Connector, 520 nm, 0.9 mW (Typ.) ● Output Power (Typical) 0.90 mW ● Laser Safety Class Class 2 ● Beam Shape Round, Ø3 mm (Typical) at 5 cm ● Housing Dimensions Ø11.0 mm x 60.2 mm 1 96 Compact Laser Module with USB Connector, 635 nm, 0.9 mW (Typ.) ● Wavelength (Typical) 635 nm ● Output Power (Typical) 0.90 mW ● Laser Safety Class Class 2 ● Beam Shape Round, Ø3 mm (Typical) at 5 cm ● Housing Dimensions Ø11.0 mm x 60.2 mm 97 16 mm Cage-Cube-Mounted Polarizing Beamsplitter Cube, 620-1000 nm, 8-32 Tap ● Ports 4 Ports with SM05 (0.535-40) Threading ● Beamsplitter Material N-SF1 ● Extinction Ratio TP:TS > 1000:1 ● Transmission Efficiency TP > 90% ● Reflection Efficiency RS, avg > 95% ● Transmitted Beam Deviation 0° ± 5 arcmin ● Reflected Beam Deviation 90° ± 20 arcmin ● Clear Aperture Ø12.50 mm ● Transmitted Wavefront Error <λ/4 at 633 nm over Ø12.50 mm ● Surface Quality 40-20 Scratch-Dig 2 98 30 mm Cage Cube-Mounted Pellicle Beamsplitter, 45:55 (R:T), 700 - 900 nm ● Ports 4, all SM1 Threaded (1.035-40) ● Membrane Material Nitrocellulose ● Housing Material Engraved Black Anodized Aluminum ● Temperature Range -40 to 70 °C ● Index of Refraction 1.5 at 550 nm ● Surface Quality 40-20 Scratch-Dig ● Transmitted Wavefront Error 0.5λ (Typical) ● Reflected Wavefront Error 1λ (Typical) 2 99 Cube-Mounted Pellicle Beamsplitter, 8:92 (R:T), Uncoated, 400 - 2400 nm ● Ports 4, all SM1 Threaded (1.035-40) ● Membrane Material Nitrocellulose ● Housing Material Engraved Black Anodized Aluminum ● Temperature Range -40 to 70 °C ● Index of Refraction 1.5 at 550 nm ● Surface Quality 40-20 Scratch-Dig ● Transmitted Wavefront Error 0.5λ (Typical) ● Reflected Wavefront Error 1λ (Typical) 2 100 Ø25.0 mm Unmounted Linear Polarizer, 550 - 1500 nm ● Laser Damage Threshold 1 W/cm2 Continuous Block ● 5 W/cm2 Continuous Pass ● Thickness (T) 2.0 ± 0.2 mm Clear Aperture Ø22.9 mm (Ø0.90) 2 101 Fabry-Perot Benchtop Laser Source, 637 nm, 8.0 mW, FC/PC ● Minimum Full Output Power 8.0 mW ● Setpoint Resolution 0.01 mW ● Laser Class 3B ● Numerical Aperture 0.10 - 0.14 ● Output Fiber Connector FC/PC, Wide 2.1 mm Key ● Compatible ● Power Stability 15 min: ±0.05 dB, 24 hr: ±0.1 dB (After 1 hr Warm-Up at 25 ± 10 °C Ambient) ● Display Accuracy ±10% ● Adjustment Range ~0 mW to Full Power ● Input Power 115 VAC / 230 VAC (Switch Selectable) 50 - 60 Hz ● Modulation Input 0 - 5 V = 0 - Full Power, DC or Sine Wave Input Only ● Operating Temperature 15 to 35 °C ● Storage Temperature 0 to 50 °C 1 102 Infrared Viewer, 350 - 1300 nm ● Spectral Sensitivity 350 - 1300 nm ● Resolution (Center) 60 LP/mm ● Field of View 40° ● Magnification 1X ● Objective Lens F1.4/25 mm ● Adjustable Iris Included ● Focus <0.1 m to Infinity ● Charging Port 5 V Micro-USB ● Non-Uniformity of Screen <20% ● Non-Uniformity of Response <15% ● Distortion of Image <18% ● Battery Life (Continuous) 50 hours ● Weight 0.4 kg ● Dimensions 153.0 mm - 157.1 mm x 172.9 mm x 51.0 mm (6.02 - 6.18 x 6.81 x 2.01) ● Temperature Range -10 °C to 40 °C ● Mounting Thread 1/4-20 Internal Thread 103 Compact Power and Energy Meter Console, Digital 4 LCD ● Display Type Graphical LCD 320 x 240 pixels, LED Backlight ● Display Screens Numerical, Bar Graph, Line Graph, Statistics, Simulated Analog Needle ● Viewing Area 81.4 mm x 61.0 mm ● (3.20 x 2.40) ● Refresh Rate 20 Hz ● Audio 1x Speaker ● Sensor Interface ● Time Constant Correction <1 s ● AD Converter 16 bit ● Trigger (Pulse Measurements, Pyroelectric Sensors) Adjustable, 0.1 - 100% ● Connector DB9F, Left Side ● Sensor Temperature Control Thermistor ● Temperature Range -10 to 80 °C ● Analog Outputs ● Signal Amplified Input Signal (Not Corrected) ● Voltage Range 0 to 2 V ● Accuracy ±3% ● Bandwidth Up to 100 kHz, Dependent on Sensor and Settings ● Connector SMA, Left Side ● Dimensions and Mounting ● Dimensions (L x W x H) 180 mm x 105 mm x 38 mm ● (7.09 x 4.13 x 1.50) ● Weight <0.5 kg (<1.1 lb) ● Mounting Options Kickstand; 1/4-20 Post Thread ● Operating Temperature 0 to 40 °C ● Storage Temperature -40 to 70 °C 1 104 Standard Photodiode Power Sensor, Si, 400 - 1100 nm, 50 nW - 50 mW ● Aperture Size Ø9.5 mm ● Head Temperature Measurement NTC Thermistor 4.7 kΩ ● Housing Dimensions Ø30.5 mm x 12.7 mm ● Active Detector Area 9.7 mm x 9.7 mm ● Cable Length 1.5 m ● Mounting Thread Universal 8-32 / M4 Tap, Post Not Included ● Aperture Thread External SM1 (1.035-40) ● Linearity ±0.5% 1 105 Nexus Breadboard, 30 x 48 x 2.4, 1/4-20 Mounting Holes ● Breadboard Thickness 60 mm (2.4) ● Top Skin Flatness ±0.1 mm (±0.004) Over Any 600 mm x 600 mm Area ● Construction Symmetrical Isotropic Construction in All Axes ● Top and Bottom Plates 5 mm (0.20) Thick Stainless Steel, 4003 Grade Working Surface ● Core Construction High-Density Plated Steel Honeycomb, 0.26 mm Thick ● Damping Proprietary Optimized Broadband Damping ● Side Panels Rigid Steel Box Section ● Side Trim Finish Matte Black Linoleum, 2 mm Inset from Table Surface ● Top Surface Finish Machined Matte Finish ● Threads and Spacing 1/4-20 Tapped Holes on 1 Centers ● Distance from Edge to First Holes 0.5 from Table Edge on all Sides ● Maximum Screw Depth 55 mm (2.1) [13.5 mm (0.53) for Outer Border Holes] 1 106 Clamping Fork, 1.24 Counterbored Slot, Universal ● Clamping Fork Secures Pedestal-Style Mount to a Breadboard or Optical Table ● 1.24 (31.5 mm) Long Counterbored Slot ● Swivel Fork 360° to Select Most Convenient Mounting Hole 110 8-32 Cap Screw and Hardware Kit ● 8-32 SS* Cap Screw, Thread Length: 1/4 Approx. Qty. 100 ● 8-32 SS* Cap Screw, Thread Length: 1 1/4 Approx. Qty. 21 ● 8-32 SS* Cap Screw, Thread Length: 3/8 Approx. Qty. 70 ● 8-32 SS* Cap Screw, Thread Length: 1 1/2 Approx. Qty. 33 ● 8-32 SS* Cap Screw, Thread Length: 1/2 Approx. Qty. 55 ● 8-32 SS* Nut Approx. Qty. 125 ● 8-32 SS* Cap Screw, Thread Length: 3/4 Approx. Qty. 38 ● #8 SS* Washer, Outer Diameter: 0.375 Approx. Qty. 260 ● 8-32 SS* Cap Screw, Thread Length: 1 Approx. Qty. 35 2 111 Ø1 Pedestal Pillar Post, 1/4-20 Taps, L = 2 ● Solid Stainless Steel Construction ● Precision Ground to Ø1 (Ø25.0 mm) ● Stackable via 1/4-20 (M6) Tapped Holes on Both Ends 7 112 Ø1 Pillar Post, 8-32 Taps, L = 4 ● Directly Mount Optomechanical Components ● 8-32 Tapped Hole on Both Ends 3 113 Ø1 Pedestal Pillar Post, 8-32 Taps, L = 6 ● Solid Stainless Steel Construction ● Precision Ground to Ø1 (Ø25.0 mm) ● Stackable via 8-32 (M4) Tapped Holes on Both Ends 10 114 Kinematic Mirror Mount for Ø1 Optics ● Mounts Ø1 Optics at Least 0.12 (3 mm) Thick ● Optic Held with a Nylon-Tipped Setscrew ● Angular Range: ±4° ● Resolution: 8 mrad (0.5°) per Revolution ● Two Counterbored #8 (M4) Through Holes Allow for Left- or Right- Handed Orientation ● 5/64 (2.0 mm) Hex Sockets in Lead Screws Accessible With or Without Knobs Removed 2 115 Adapter with External 8-32 Threads and External 1/4-20 Threads ● Thread A (External): 8-32 ● Thread B (External): 1/4-20 ● Length C: 0.57 (14.5 mm) ● Machined from 303 Stainless Steel ● Adapt One Common Thread Standard to Another ● Ideal for Mounting Posts 10 116 Ø1 Pedestal Pillar Post, 8-32 Taps, L = 4 ● Solid Stainless Steel Construction ● Precision Ground to Ø1 (Ø25.0 mm) ● Stackable via 8-32 (M4) Tapped Holes on Both Ends 6 117 Ø1 Pillar Post, 8-32 Taps, L = 0.5 8-32 Tapped Hole on Both Ends 13 118 8-32 Stainless Steel Setscrew with Hex on Both Ends, 1/2 Long, 10 Pack ● Length: 1/2 (12.7 mm) ● Type: Double-Ended ● Hex: 5/64 (Both Ends) ● Material: 300 Series Stainless Steel 2 119 Ø1 Pedestal Pillar Post, 1/4-20 Taps, L = 1 ● Solid Stainless Steel Construction ● Precision Ground to Ø1 (Ø25.0 mm) ● Stackable via 1/4-20 (M6) Tapped Holes on Both Ends ● The 1/4-20 (M6) thread allows for easy integration of Ø1 post extensions and spacers. 7 120 1/2 XYZ Translation Stage with Standard Micrometers, 1/4- 20 Taps ● Actuators: 148-811ST Micrometer ● Resolution: 0.025 Translation per Revolution ● Travel: 0.50 ● Engraving: 0.001 (25.4 μm) per Division ● Taps: Top: 1/4-20 (Qty. 7) ● Bottom: 1/4-20 (Qty. 7) and 8-32 (Qty. 4) ● Barrel Size: Ø3/8 (Ø9.5 mm) ● Preconfigured, 3-Axis, Right-Handed XYZ Translators 2 121 Compact Variable Height Clamp, 1/4-20 Tapped Table clamp uses two cap screws: one in the 1/4- 20 tapped hole to adapt the clamp to virtually any height and another in the slotted hole to secure the clamp to the table. 20 122 Ø1 Pillar Post, 8-32 Taps, L = 1 ● 8-32 Tapped Hole on Both Ends ● These pillar posts are machined from nonmagnetic 303 stainless steel 5 123 Ø3 Precision Kinematic Mirror Mount, 2 Adjusters ● Optic Diameter: 3 or 75.0 mm ● Minimum Optic Thickness: 0.28 (7.1 mm) ● Optical Axis Height: 2.13 (54.1 mm) ● Angular Adjustment: ±4o ● Number of Adjusters: 2 ● Type of Adjusters: Removable Knobs ● Adjuster Thread: 1/4-80 ● Mounting: #8 (M4) Counterbored Holes, 4 Places ● Optics Secured in Double-Bored Hole with Nylon-Tipped Setscrew ● Thick Back Plate and Heavy-Duty Springs for Stability ● Fabricated from Black Anodized Aluminum 124 Ø1 Kinematic Mirror Mount, 2 Differential Adjusters, 1 1/4- 80 Adjuster ● Optic Diameter: 1 or 25.0 mm ● Minimum Optic Thickness: 0.16 (4.1 mm) ● Coarse Angular Adjustment: ±4o ● Adjuster Thread: 1/4-80 / M3 x 0.40 / M3 x 0.375 ● Coarse Resolution: 8.3 mrad/rev ● Resolution Using Differential Mechanism: 660 μrad/rev ● (136 arcsec/rev) ● Minimum Incremental Movement: 2.91 μrad (0.6 arcsec) ● Mounting Style: #8 (M4) Counterbored Holes, 2 Places ● Angular Range with Differential Mechanism: ±1.5° ● Optics Secured in Double Bored Hole with Nylon-Tipped Setscrew ● Thick Back Plate and Heavy-Duty Springs for Stability ● Fabricated from Black Anodized Aluminum 2 125 Ø1 Clear-Edge Kinematic Mirror Mount, 2 Adjusters ● Ø1 Optics Between 0.10 and 0.25 Thick ● Angular Adjustment: ±4° ● Resolution: 8.3 mrad/rev ● Two #8 (M4) Counterbores Allow Left- and Right-Handed Post Mounting 2 126 Adapter with Internal 8-32 Threads and External 1/4-20 Threads, 0.38 Length 10 127 Ø1 Pillar Post, 8-32 Taps, L = 3 8-32 Tapped Hole on Both Ends 3 128 Ø4 Precision Kinematic Mirror Mount, 2 Adjusters ● Optic Diameter: 4 ● Minimum Optic Thickness: 0.28 (7.1 mm) ● Optical Axis Height: 2.85 (72.4 mm) ● Angular Adjustment: ±4o ● Number of Adjusters: 2 ● Type of Adjusters: Removable Knobs ● Adjuster Thread: 1/4-80 ● Mounting: #8 (M4) Counterbored Holes, 4 Places ● Optics Secured in Double-Bored Hole with Nylon-Tipped Setscrew ● Thick Back Plate and Heavy-Duty Springs for Stability ● Fabricated from Black Anodized Aluminum ● Hardened Stainless Steel Inserts at Kinematic Contacts Reduce Wear 2 129 Screw-On Cable Straps (Qty. 15) Screw-On Straps for Cable Routing on Optical Tables or Breadboards 2 130 Optical Grade Cotton-Tipped Applicators, 100 Per Pack ● 6 Wood Stick Disposable Applicators with Cotton Tips (100 per Pack) ● Appropriate for Cleaning Connectors or Optics 10 131 Kimwipes®, 280 Kimwipes per Box, 12 Boxes Per Case ● 4.4 x 8.4 (11.2 cm x 21.3 cm), Durable, Absorbent, Extra Low Lint Sheets ● Ideal for Cleaning Connectors between Polishing Steps 2 132 Lens Tissues, 25 Sheets per Booklet, 50 Booklets in a Closeable Box ● Extremely Soft, Premium Grade Sheets ● Single Sheet Dimension: 4.9 x 2.9 (124 x 73 mm) 1 133 20-Piece Balldriver and Hex Key Kit with Stand, Imperial ● Facilitates Organization ● Convenient Stand Included 2 134 Adjustable Spanner Wrench ● Diameter Range from 0.12 to 2.89 (3.0 mm to 73.4 mm) ● Self-Centering, One-Handed Diameter Adjustment Mechanism ● Replaceable Stainless Steel Blades 1 135 11-Piece Color-Coded Hex Key Set, Imperial ● Color Coded for Easily Distinguishable Sizes ● Exposed Ends for Usual Hex Key Fit ● 90 degree Bend, Black Oxide Finish ● Engraved Holder Included 2 136 Ø25 mm Post Spacer and 1/4-20 Setscrew Kit ● Solid Stainless Steel Construction ● Large Diameter Relief Cut on Top and Bottom of Spacers for Additional Mounting Stability Includes: ● Ø25 mm Post Spacer, 1 mm Thick Qty. 5 Ø25 mm Post Spacer, 7 mm Thick Qty. 1 ● Ø25 mm Post Spacer, 2 mm Thick Qty. 5 Ø25 mm Post Spacer, 8 mm Thick Qty. 1 ● Ø25 mm Post Spacer, 3 mm Thick Qty. 5 Ø25 mm Post Spacer, 9 mm Thick Qty. 1 ● Ø25 mm Post Spacer, 4 mm Thick Qty. 5 Ø25 mm Post Spacer, 10 mm Thick Qty.5 ● Ø25 mm Post Spacer, 5 mm Thick Qty. 5 1/4-20 Setscrew, 7/8 Long Qty. 25 ● Ø25 mm Post Spacer, 6 mm Thick Qty. 1 1/4-20 Setscrew, 1 Long Qty. 25 1 137 High-dynamics tip/tilt platform, 35 mrad, strain gauge sensors, D-sub connector, incl. mirror Ø 12.5 mm ● Active axes θX, θY ● Integrated sensor SGS ● Tip/tilt angle, closed loop (static motion at 0 to 120 V) ±17.5 mrad ● Resolution, open loop 0.1 μrad ● Resolution, closed loop 1.0 μrad ● Linearity 0.05 (unidirectional) % ● Repeatability 1 (bidirectional) μrad ● Resonant frequency, under load, with Ø 12.5 mm × 3 mm quartz glass mirror 1.6 kHz ● Gap between the center of rotation and platform surface 3.3 mm ● Drive properties ● Ceramic type PICMA® P-885 ● Electrical capacitance per axis 6.2 μF ● Operating temperature range -20 to 80 °C ● Material platform Titanium ● Mass (with cable and connector) 325 g ● Cable length 2 m ● Sensor/voltage connection Sub-D 37 (m) 138 Digital multi-channel piezo controller, 3 axes, - 30 to 130 V, strain gauge sensors, D-sub 37 socket, analog inputs Axes 3 Processor DSP 32/64- bit, floating point, 375 MHz Sampling rate, servo-control 25 kHz Sensor Sensor type Strain gauge, piezoresistive sensors Sensor resolution 20 at 1 kSPS oversampling bit Sensor bandwidth (-3 dB) 6 kHz max. Sensor channels 3 Amplifier Output voltage -30 to 130 V Amplifier channels 4 Amplifier bandwidth 6.5 kHz Interface and operation Interface / communication Ethernet, USB, RS-232, serial SPI high- speed interface Piezo / sensor connection Sub- D Special Command set PI General Command Set (GCS) Linearization 4th order polynomials, DDL (Dynamic Digital Linearization) Miscellaneous Overtemp protection Max. 71 °C, deactivation of the piezo voltage output Dimensions 263 × 89 × 302 mm Mass 3 kg approx. Operating voltage 24 VDC from external power supply (included) 1 CCD Camera: (Quantity 01) 1 SLD Light Source ● Center wavelength (nm) 795 ± 5 ● Spectral width, FWHM (nm) Min. 13 Typ. 15 ● Output power, SM (mW) Min. 15.0 Typ. 20.0 1 2 Light Source ● Output power, Pop, ex SM fiber, 12.0 mW typ. ● Forward current at Pop, 200 mA typ. ● Central wavelength at Pop, 840 nm typ ● Spectrum width at Pop, FWHM, 25 nm typ. ● Slow / fast polarization ratio (PM modules) at Pop, 10 dB typ. ● SLD forward voltage at Pop, 2.6 V ● Operating temperature at Pop, -20 °C to +65°C ● Cooler current, 2.5 A 1 3 Array of refractive positive orthogonal microlenses ● Material fused silica ● Pitch P=240um ● Radius R=4.0mm ● Focus F=8.75mm (at 633nm) (a) Size: diameter D=10mm x 1mm ( 5 Qty.) (b) Size: diameter D=10mm x 3mm (5 Qty.) 01 Optical Grade cotton-tipped applicators, 100 per pack 10 02 Screw-on cable straps (quantity 15) 02 03 Lens tissues, 25 sheets per booklet, 50 booklet in a box 01

Refer document

INR 250000.0 /-

INR 1.04 Crore /-