Tender For Welcome Maintenance And Certain B/R Items To Offrs Md Accn In Area-Iv Of Age B/R (W) At Colaba, Mumbai-M&Lforpreparation of old decorated surfaces of wallsincluding brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescentsaltsandtrading oil, greasy spots and apply one coat of distemper oil emulsion on wallscomplete by an authorised applicator all as specified and directed. 2 All as per item No 1 mentionedhere-in-above butone coat of distemper on ceiling. 3 M&L for preparation of old painted wood or wood based surfaces,ofany description, not otherwisedescribedover 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. 4 M&Lfor french polishing on wooden surfaces of any description, width or girth including cleaning and preparing the surfaces including a coat of wood filler on old surfaces with one or more coats all as specified and directed. 5 M&Lfor preparation ofold painted steel surfaces of any description over 10 cm width orgirth, not otherwise described and applying one coat of syntheticenamel paint all as directed. 6 M&L for the prepration of wall including Complete removal of existing treatment and applying2.00 mm thick (average) wall careputty, rubbing with sand paper, formaking the wall surface to receivetwo coats of distemper oil emulsion over a coat of alkali resistant primingpaint all as specified and directed. 7 Taking downcement plaster ofany description from brickwallsurfaces including racking out joints and hacking for key, scrubbing down with water all as specified and directed. 8 M&L 15 mm thick cement plaster in CM (1:6) on brick work/ RCC wall and finish the surface fair and even without using extra cement all as specified and directed. 9 M&L 5 mm thickcement plaster in CM(1:3) on ceiling, surfaces finishedfair and even without using extra cement all as specified and directed. 10 M&L forpreparation of newly plastered ceilingsurfaces and applying two coats of OBD over a coat of primer all as specifieddirected. 11 M&L forpreparation of newly plastered wall surfaces and applying 2 mm thick (average) wall care putty, rubbing with sand paper and applyingtwo coats of distemper oil emulsion over a coat of alkali resistant primer all as specified and directed. 12 Taking up or down steel tubing and connection including cleaning for refixing or removed to store,15 mm dia boreall as specified and directed 13 Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia boreall as specified and directed 14 Fixing only old15 mm dia steel tubing including cleaningin positon(walls, ceiling and floor) all as specified and directed 15 Fixing only old20 mm dia steel tubing and including cleaningin positon(walls, ceiling and floor) all as specified and directed 16 S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors all as specified and directed 17 S&F GI tubing 20 mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors all as specified and directed 18 S&F in repairs vitreous China wash down water closet pan (pedestal pattern) white, includingtrap, connection to drain and flushing pipe including seat cover for pedstal pan all as specified & directed. 19 S&F in repairs vitreous China wash down water closet pan (Wall mounted ) white, including trap, connection to drain and flushing pipe including seat cover for pedstal pan all as specified & directed. 20 S&F in repairs vitreous China wash basin white, flat back, size 580X450 mm including cutting for pinning in ends of brackets all as specified & directed. 21 S&F in repairs 10 litre capacity PVC low level flushing cisternwith all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of suitable size all as specified & directed. 22 S&F in repairs 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified & directed. 23 S&F in repairs 15 mm bore fancy type concealed stop cock (regular body)cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified & directed. 24 S&F PVC connection 15mm size PTMT nuts of length 450 mm all as specified & directed. 25 S&F in repairs 15 mm bore fancy typetwo way bib taps long bodycast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule all as specified & directed. 26 M&L in repairs 15 mm bore fancy type wall mixer with 115 mm long bend pipe for connection to overhead shower (with bush and piston Divertor fittings) with aerator all as specified and directed. 27 S&Fin repairs 15mm nominal size, central hole basin mixture with U shaped round casted spout with 450mm long pipe connection with aerator as specified an directed. 28 M&L in repairs 15 mm borefancy type health faucet with SS hose all as specified and directed. 29 M&L in repairs fancy type CP Towel Rail 61 cm long all as specified and directed. 30 M&L in repairs CP Towel Ring all as specified and directed. 31 M&L in repairs CP soap dish all as specified and directed. 32 M&L in repairs CP toilet paper holder all as specified and directed. 33 M&L in repairsCP Towel Bracket (61 CM) long all as specified and directed. 34 S&F in repairs sheet glass corner shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long all as specified and directed. 35 S&F in repairs15 mm bore overhead rain shower, 200x200mm size,single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 305mmlong (light weight) square shape with wall flange all as specified & directed. 36 S&F in repairs SS grating round 125mm size of anti- cockroach, anti-clog, anti faul all as specified and directed. 37 S&F in repairs 15 mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettered HOT or COLD with long screwed sunk and fly nuts all as specified & directed. 38 S&F in repairs5.50 mm thick of size600X450 mm bevelled edge mirror of selected quality glass and fixed to walls using hidden studs all as specified and directed 39 S& F in repairs water closet seat cover any coloured pattern with flat bottom and mild steel chromium plated or aluminium hinging devices all as specified and directed. 40 S&F in repairs sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarft wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm,bowl size 410 mm x 330mm x 160mm all as specified and directed. 41 M&L in repairs 75 mm dia PVC(SWR) multi floor trap with grating including jointing with solvent cement all as specified and directed. 42 S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples all as specified and directed. 43 Hacking out old broken glass (any thicknesss, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and directed. 44 M&L sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 sqm each pane 3 mm thick all as specified and directed. 45 M&L figured glass pin headed ordinary quality and glazing with oil putty in square n. exc 0.50 sqm each pane 3 mm thick all as specified and directed. 46 Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises out side MD land. 47 M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specified and directed. 48 M&L Screed bed or bedding layer of mortar 15 mm thick in (1:6)for laying floor finishes like tiles all as specified and directed. 49 M&L rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed. 50 M&L glazed tiles digital coloured ceramic tiles 300x450x7/600x300x7mm thick in vertical surfaces such as skirting and dados, set and jointed in neat cement slurry and pointed in coloured cement to match the shades of the tiles all as specified and directed. 51 M&LVitrified light shade coloured Ceramic tiles 10 mm thick (Square/rectangular) polished area of each tile not exc 0.36 sqmin floorsset and jointed in neat cement slurry and pointed in white or coloured cement to matchthe shades of the tilesall as specified and directed. 52 M&LVitrifiedlight shade coloured Ceramic tiles 10 mm thick (Square/rectangular) polished, area of each tile not exc 0.36 sqmin vertical surfaces such as skirtingsand dadosset and jointed in neat cement slurry and pointed in white or coloured cement to matchthe shades of the tiles all as specified and directed. 53 M&L Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 sqm but not exc 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specified and directed. 54 M&L Hi-Gloss digital ceramic tiles in vertical surface of size 600mm x 1200mm x 8 to 10 thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specified and directed. Note : The above item will be executed by applying tile adhesive of approved make and as per manufactureinstruction. 55 S&F in repairs 20 mm dia decorative type curtain rods SSand all other connected works all as specified and directed.Make & Sample As approved By GE). 56 S&F in repairs 20 mm dia decorative type curtain Bracketsof SS alloy, including fixing in position and all other connected works all as specified and directed. 57 S&Fstainless steel kitchen plate rack made out of 0.63mm thick stainless steel sheetof size 750x600mm includingscrews all as specified and directed. 58 S&F in repairs 100 mm butt hinges medium weight cold rolled stainless steel all as specified and directed 59 S&F 100 mm butt hinges medium weight cold rolled stainless steel all as specified and directed 60 S&F100 mm butt hinges medium weight cold rolled mild steel all as specified and directed 61 S&F in repairs 75 mm butt hinges medium weight cold rolled stainless steel all as specified and directed 62 S&F in repairs 75 mm butt hinges medium weight cold rolled mild steel all as specified and directed 63 S&F in repairs aluminium anodised 200 mm barrel tower bolts of extruded section all as specified and directed. 64 S&Faluminium anodised 200 mm barrel tower bolts of extruded section all as specified and directed. 65 S&F in repairs aluminium anodised 75 mm barrel tower bolts of extruded section all as specified and directed. 66 S&Faluminium anodised 75 mm barrel tower bolts of extruded section all as specified and directed. 67 S&F in repairs aluminium handle 150 mm cast type anodised all as specified and directed 68 S&F aluminium handle 150 mm cast type anodised all as specified and directed 69 S&F in repairs aluminium handle 75 mm cast type anodised all as specified and directed 70 S&F aluminium handle 75 mm cast type anodised all as specified and directed 71 S&F in repairs300 mmlongAluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed. 72 S&F 300 mmlongAluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed. 73 Resecuring or easing & adjusting, without taking down shutters of any description area exc 1.00 sqm but not exc 2.00 sqm all as specified and directed. 74 Taking down shutters of any description area n exc. 1.00 sqm each all as specified and directed. 75 Taking down shutters of any description area exc. 1.00 sqm but n.exc. 2.00 sqm each all as specified and directed. 76 Taking down shutters of any description area exc. 2.00 sqm each all as specified and directed. 77 Taking down Chowkhats or frames with shutters area exc 1.50 sqm but n exc 4.00 sqm each all as specified and directed.. 78 Taking Shutters of any description area n exc 1 sq. m each all as specified and directed. 79 S&F 18 to19 mm thick HDHMR board, prelaminated one side with decorative choice lamination & other side high glossy acrylic sheet of 3mm thick, exterior grade, fixed with screws to frame work as in cup borad & kitchen cabinet shutters and all other similar works all as specified and directed. 80 S&F 18 to19 mm thick HDHMR board, prelaminated on both side, exterior grade,fixed with screws to frame work as in cup borad & kitchen cabinet shutters and all other similar works all as specified and directed. M 81 S&F of Partial overlay / fully overlay hydraulic self closing concealed hinges having size 103mm x 64mm finish of nickel/silver all as specified and directed by Engg-in-charge. 82 S&F stainless steel cabinet / drawers handle having a length of 200mm of any shape all as specified and directed. 83 S&F Factory made 35 mm thick 2nd hard wood plain framed panelled shutters (any panel) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS :1003(Part-I) kiln seasoned and chemically pressure treated all as specified and directed. 84 S&F 2nd class hard wood 35mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securinggauge,etc sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) and fitted to chowkhats all as specified and directed. 85 S&F 2nd Class hard wood Glazed and skelton shutter 30mm thick open rebated and prepared to receive glass, gauge etc with sash bars divided into square with plain chemfered or rounded mitred and rebated sash bars any member as in windows ventilator styles and rails provided as per SSRpart -I Sector 8 clause 8.24 (b) all as specified and directed. 86 S&F 30mm thick flush shutter, solid core construction with block board core and ply wood face panel, commercial type on both side all as specified and directed. 87 M&L for preparation of newwood or wood based surfaces, ofany description, not otherwisedescribed over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed. 88 S&F 2nd class hard wood plain, solid, straight chowkhat and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joint all as specified and directed. 89 M&Lpreparation of wood and wood base materials, new or old, of any description and girth, not otherwise described, and treating ends of posts, back of chowkhats, etc. area tarred exc 0.1 sq m but n. exc. 0.5 sq m each all as specified and directed. 90 M&L preparation of wood and wood base materials,new or old, of any description and girth, not otherwise described, andtreating small articles such as holdfasts,end of posts,backs of chowkhats, etc area n. exc. 0.1 sq m each complete all as specified. 91 M&L PCC 1:3:6, type C1 (using 20 mm graded crushed stone aggregate)as in bed blocks for hold fast including necesssary formwork all as specified and directed. 92 S&F mild steel flat iron as in hold fast clamps articles conforming to FE 410 -O or FE 310-O all as specified and directed. 93 M&L machine Grinding/rubbing/polishing to Terrazzo tile surfaces to mirror finish all as specified and directed. 94 S&F PVC 3D Decorative varrious pattern modern style5-6 mm thick water proofing wall paper before complete removal of existing treatment by scrapping with mechanical wall sander having cart part Truecare series H-01 with variable speed control 1500-2700 RPM(having mechanical vaccum mechanism)sanding pad of 180 mmhaving dia of 7/9 to make the surface free from dust, loose paint etc. by skilled labour fixing on wall usingtop guard glue adhesive fixedall as specified & Directed.Note:- Wall paper shall be as approved by GE . 95 S&F in repairs to 9 feet pulley operated cloth drying system, aluminium anodised 20mm dia pipes, channel assembly, locking system to hide rope knot, ropes 4 mm dia HDPE double core & fitting material all as specified and directed. 96 S&F solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed all as specified and directed. 97 S&Ffactory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top andbottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile C channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturers instructions and drawings as shown in SSR Part-I 2009 complete all as specified. 98 S&F powder coated aluminium frame of any colour (minimum thickness of powder coating 50 micron)for doors/windows/ ventilators with one or more rebates including joining cleat for fixing all as specified and directed. 99 M&L5.5 mm thick sheet glass, ordinary quality and glazing with aluminium beads and rubber gaskitin square exc area 0.5 sqm in each pane frosted on one side all as specified and directed. 100 M&L in repairs to 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium beads and rubber gaskitin square area exc 0.5 sqm all as specified and directed. 101 S&F in repairs door/ cupboard lock brass 6 lever multipurpose lock of size 100mm. make Godrej. Product code 9350 or equivalent as approved by GE. 102 S&F in repairs Stainless Steel Double Bowl Kitchen Sink made of stainless steel 1 mm thick 304 grade kitchen or laboratory with plugs, washers and waste pipe including bedding in cement morter to dwarfwall or including fixing cantilever brackets and connecting union to pipe all as specified and directed. 103 S&F as in repairs 15 mm bore fancy type sink cock (wall mounted) with 150mm (6)long swivel spout, wall flange and provision for WP connection,cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule all as specified and directed. 104 S&F in repairs stainless Steel 304 Grade Dual Folding Towel Rack for Bathroom/Towel Stand/Hanger/Bathroom Accessories (24 Inch-Chrome) all as specified and directed. 105 S&F magnetic catcher suitable for kitchen cabinet shutter all as specified and directed 106 S&F mirror cabinet PTMT of 400mm x 500 mmwith megnetic locking arrangements fixed with and inclduling chromium plated brass screws and PVC rawl plugs all as specified and directed. 107 S&F stainless steel peg set of six suitable size of length all as specified and directed. 108 M&L for plastering 15-20 mm thick (Average) epoxy basedPolymer modified cement mortar in two coats, 15mm base coat and subsequent finishing coat with and including curing as per manufacturers instructions all as specified and as directed by Engr-in-Charge. 109 M&L forPVC Wall Lining consisting of 5mm thickt wood grain printed PVC sheetinclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing including PVC fillets of width 35mm fixing to the wall to make PVC frame all as specified and directed. 110 M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing all as specified and directed. 111 M&L for complete removal of existing treatment andapplying Two or more coats of 100% elastomeric acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and directed. 112 S&F tumbler holder -Gold bright PVD all as specified and as directed . 113 S&F Grab bar of stainless steel 300 mm long of make Jaquar Cat Part No AHS-CHR-1501 or equivalent of Kholer all as specified and directed. 114 Demolition of stone slabs and tiles of any description or thickness in floors, aprons, dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site all as specified & directed. 115 M&LGranite (of any type and colour) 18 mm thick machine cut , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid in floors/Jambs/WHB conters and all other similar worksin approved design over 20 mm thick screed bedin cement mortar 1:4 all as specified and directed. 116 S&F in repairs Mortice night latch, size 65 mm, mild steel, 4 levers all as specified and directed. 117 S&F in repairs of stainless steel cabinet / drawers handle having a length of 250mm and shape all as specified and directed. 118 S&F in repairs of stainless steel modular thali-plate basket SS 304, of size 520x485x200mm, heavy duty and grade steel with finish of zinc, corrosion resistance telescopic drawer soft closing channel having weighing capacity of 25 kgall as specified and directed. 119 S&F in repairs of stainless steel modular perforated cutlery basket SS 304 size of 52 x 48.5 x 10 cm with heavy duty and grade steel with finish of zinc, corrosion resistance telescopic drawer soft closingchannel having weighing capacity of 25 kgall as specified and directed. 120 S&F in repairs of stainless steel glass tray plate tray having length of 610mm,corrosion resistance telescopic drawer soft closingchannelall as specified and directed. 121 S&F in repairs of stainless steel triple cutlery inserts having length of 500mmwith telescopic drawer soft closing channel having weighing capacity of 6 kg all as specified and directed. 122 S&F in repairs of stainless steel 304 grade, size 180x515x485mm pull out detergent rack having two shelves spaces with telescope drawer channel having weighing capacity of 6 kg all as specified and directed. 123 S&F in repairs of stainless steel grain trolley SS 304 having size of 525x485x350mm, with heavy duty and grade steel with finish of zinc, corrosion resistance soft closing telescopic drawer channel having weighing capacity of 25 kg all as specified and directed. 124 S&F in repairs of stainless steel slim Ergo single square rail 550mm anthracite finish with heavy duty and grade steel with finish of zinc, corrosion resistance telescopic soft closingdrawer channel having weighing capacity of 25 kg all as specified and directed. 125 S&F for joist, channel, angle, or tee sections, or MS Flats fixed independantly without connecting plates, etc. Fe 410-W (Gde-E- 250) quality- A (cut to ordinary lengths i.e within 20mm of length indicated) as in frame work for Galvalume / CGI chajjas all as specified and directed. 126 M&L for preparation ofnew steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide, zinc primer all as specified and directed. 127 S&F in repairs wash basin/kitchen sink collapsible waste pipe outlet upto Nahni trap all as specified and directed. 128 S&F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
