}

Tender For Construction Of New Shed For Composting Yard At Vallipuram Village, Chengalpet District In Tamil Nadu, Chennai-Tamil Nadu

Government Departments has published Tender For Construction Of New Shed For Composting Yard At Vallipuram Village, Chengalpet District In Tamil Nadu. Submission Date for this Tender is 28-05-2024. Shed Construction Tenders in Chennai Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

43328185
Tender For Construction Of New Shed For Composting Yard At Vallipuram Village, Chengalpet District In Tamil Nadu
Open Tender
Indian
Tamil Nadu
Chennai
28-05-2024

Tender Details

Construction Of New Shed For Composting Yard At Vallipuram Village, Chengalpet District In Tamil Nadu , Surface Dressing Of The Ground Including Removing Vegetation And In Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead Upto 50M And Lift Upto1.5M.All Kinds Of Soil , Earth Work Inexcavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5M,Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed,With In A Lead Of 50M. All Kind Of Soil. , Filling Available Excavated Earth(Excluding Rock) Intrenches, Plinth, Sides Of Foundations Etc.Inlayers Not Exceeding 20 Cm In Depth,Consolidating Each Deposited Layer By Ramming And Watering, Lead Upto 50 M And Lift Upto1.5M. , Supplying And Filling In Foundation / Plinth / Basement With M Sand / Quarry Dust Under Floors, Including Watering, Ramming, Consolidating And Dressing Complete , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering- All Work Upto Plinth Level: 1:4:8(1 Cement : 4 Coarses And : 8 Graded Stone Aggregate 40Mm Nominal Size) , Providing And Laying In Position Ready Mixed Design Mix Cement Concrete For Reinforced Cement Concrete Work, Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolona / Ordinary Portland / Portland Slag Cement Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Work Ability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads: But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of Engineer-In-Charge For The Following Grade Of Concrete: (Note:-Extra Cement Upto 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cemenet Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement. Concrete Of M30 Grade With Minimum Cement Content Of 350 Kg/ Cum All Works From Foundation Upto Floor V Level. , Add For Using Extra Cement In The Items Of Design Mix Over And Above The Specified Cement Content Therein. , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form Work For All Rcc Works In All Levels. , Steel Reinforcement In All Levels For R.C.C. Works Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete In All Levels. Tmt Bars-Fe500d Grade. , Masonry Work With Fly Ash Solid Cement Concrete Blocks M10 Grade Using Cement Mortar 1:4 In All Levels. , Half Brick Masonry Work With Fly Ash Cement Concrete Blocks M10 Grade Using Cement Mortar 1:4 In All Levels , Structural Steel Work Riveted, Bolted Or Welded In Builtup Sections, Trusses And Framedwork, Including Cutting, Hoisting, Fixing In Position And Applying Two Coats Of Synthetic Enamel Paint Over A Priming Coat Of Approved Steel Primer (Zinc Chromate Yellow Primer)All Complete In All Levels , Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) 0.50Mm (+0.05%) Total Coated Thickness With Zinc Coating 120 Grams Per Sqm As Per Is:277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineerin-Charge. The Sheet Shall Be Fixed Using Selfdrilling / Self Tapping Screws Of Size (5.5X55mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal / Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. , Providing And Fixing 1Mm Thick M.S. Sheet Door With Frame Of 40X40x6 Mm Angle Iron And 3Mm M.S. Gusset Plates At The Junctions And Corners, All Necessary Fittings Complete, Including Applying A Priming Coat Of Approved , Providing And Fixing M.S. Grills Of Required Pattern Inframes Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Two Coats Of Synthetic Enamel Paint Over A Priming Coat With Approved Steel Primer (Zinc Chromate Yellow Primer) All Complete In All Levels , 12 Mm Cement Plaster Of Mix: 1:4 (1 Cement: 4 Fine Sand). , Cement Concrete Flooring 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Stone Aggregate) Finished With A Floating Coat Of Neat Cement, Including Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 40 Mm Thick With 20 Mm Nominal Size Stone Aggregate. , Finishing Walls With Water Proofing Cement Paint Of Required Shade: New Work (Two Or More Coats Applied @3.84Kg/10 Sqm Over A Coat Of Cement Primer) , Providing And Fixing Soil, Waste And Vent Pipes: Upvc Pipe 4Kg/ Sqcm Including All Fittings. (Prince/Finolex/Astral) , 75Mm Dia , 110Mm Dia , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. , 25 Mm Nominal Outer Dia Pipes , 40 Mm Nominal Outer Dia Pipes , Providing And Fixing Water Closet Squatting Pan (Indian Type W.C. Pan) 580X440mm With 100Mm Upvc P Or S Trap, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever) Conforming To Is:7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required , Providing And Fixing Wash Basin 550Mm X 400Mm With C.I. Brackets, 15Mm C.P. Brass Pillar Taps, 32Mm Pvc Waste Pipe Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is:733 And Is:1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E.At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rustfree, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws,All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately): For Fixed Portion. , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge. (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 4.0 Mm Thickness , Excavating Trenches Of Required Width For Pipes, Cables, Etc Including Excavation For Sockets, And Dressing Of Sides, Ramming Of Bottoms, Depth Upto 1.5M, Including Getting Out The Excavated Soil, And Then Returning The Soil As Required, In Layers Not Exceeding 20 Cm In Depth, Including Consolidating Each Deposited Layer By Ramming, Watering, Etc. And Disposing Of Surplus Excavated Soil As Directed, Within A Lead Of 50M: Pipes, Cables Etc. Exceeding 80Mm Dia.But Not Exceeding 300Mm Dia , Providing And Fixing Factory Made Single Extruded Wpc (Wood Polymer Composite) Solid Decorative Type Flush Door Shutterof Required Size Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade) Calcium Corporate And Natural Fibers (Wood Powder/Rice House/ Wheat Husk) And Non Toxic Additives (Maximum Toxicity Index Of 12 For 100Gms) Having Minimum Density Of 500Kg/ Cum And Screw With Drawned Strength Of 1800N (Face) X 900N (Edge) Minimum. Compressive Strength 50N/Mm2 And Resistance To Spread Of Flame Of Class A Category With Property Of Being Termite / Borer Proof. Water/Moisture Proof And Fire Retardant Wpc To Be Laminated With Pvc Fail Of Minimum Of 14 Microns Thick Of Approved Design Pasted With Hot Melt Adhesive On Both Faces Of Shutter And Fixing With Stainless Steel Butt Hinges Of Required Size With Necessary Full Body Threaded Star Headed Counter Sunk Ss Screws, All As Per Directions Of Engineering In Charge. 28Mm Thick. Including 3X2 Door Frames Including Ss Aldrop / Lock, Ss Tower Bolts & Ss Hinges Etc , Providing And Laying Ceramic Glazed Floor Tiles / Wall Tile Johnson / Kajaria / Somany For Rooms, Floors Of 300X300mm Or Higher Size And Minimum Thickness Of Approved Shade And Pattern In Flooring Over A Bed Plaster On 20Mm Thick Cement Mortar 1:4 (1 Cement: 4 Coarse Sand / M Sand) Including Pointing The Joint Swith White Cement And Matching Pigment Etc., Complete. , Providing And Fixing 100Mm Upvc Trap With Grating Or Nahani Trap , Providing And Fixing Square - Mouth S.W.Gully Trap Class Sp-1 Complete With C.I. Grating Brick Masonry Chamber With Water Tight C.I. Cover With Frame Of 300X300mm Size(Inside) The Weight Of Cover To Be Not Less Than 4.50 Kg And Frame To Be Not Less Than 2.70Kg As Per Standard Design: , Constructing Masonry Chamber 45X45x50cm, Inside With 100 Class Designation Flyash Concrete Block Work In Cement Mortar 1:5 (1 Cement : 5 Fine Sand / M Sand) For Sewer Intersection With Sfrc Cover With Fame, Finishing The Interior With Cement Mortar 1:3 Floating Coat With Cement Etc Complete. With Flyash Concrete Block Of Class Designation 100 , Electrical Work Including Materials, Fittings And Wiring With Labour Cost For The Following; Supply, Installation, Testing And Commissioning Of The Following As Per Latest Ecbc / Cea And Other Localbody Norms. 1) Led Tubelights - 15 Points 2) Plug Point 15Amps - 8 Points 3) Plug Points 5 Amps - 5 Points 4) 3 Phase Electrical Power Supply 5) Main Distribution Panels 6) Energy Meter - 1 No 7) Electrical Circuit Breakers 8)Supply Cables From Nearest Power Supply Source

Key Value

Document Fees
Refer document
EMD
INR 140000.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail