|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | M&L for digital Non- skid ceramic tiles, dark/light colour of size 1200x1200x10mm thick, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 20mm thick screed bed in CM 1:4, complete all specified and directed. |
| 3 | M&L for digital ceramic glazed tiles, in vertical surface of size 600x450x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile fixed over and including 10mm thick backing coat in CM 1:4, complete all as specified and directed. |
| 4 | Taking down chokats or frame with shutters (without taking off shutters from frame)n.exc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick work/stone work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without extra cost to the Govt.) and removing from site complete all as specified and directed. |
| 5 | Taking down chokats or frame with shutters (without taking off shutters from frame) exc 1.5sqm and n.exc 4.0sqm each including cutting holes for taking out hold fast or dismantling brick work/stone work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without extra cost to the Govt.) and removing from site complete all as specified and directed. |
| 6 | S&F powder coated aluminium anodised (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections/ 3 track and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. |
| 7 | S&F aluminium anodiseddoor shutters, powder coated of any colour (Thickness of powder coating not less than 50 micron) aluminium section weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles, hinges, anodised aluminum snap beading screws, handle, locking arrangement etc. complete all as specified and directed. |
| 8 | S&F aluminium anodised window and ventilator shutters powder coating of any colour (Thickness or powder coating not less than 50 micron, fixed/sliding type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handle, locking arrangement etc. complete all as specified |
| 9 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and as directed. |
| 10 | S&F 5.5mm thick sheet glass selected quality and glazing with aluminium beading in squares / rectengular in window/door shutter any size complete all as specified. |
| 11 | S&F 12mm thick toughned glass as in hinged door, partitions automatic door with necessary long solid fancy type handle, suitable hinges, locking arrangment, hydraulic floor spring as required complete all as specified and directed. |
| 12 | S&F 10mm thick toughned glass as in hinged door, partitions,automatic door complete all as specified and directed. |
| 13 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or with aluminium beading to aluminium joinery in pannels complete all as specified and directed. |
| 14 | S&F 6mm thick Non Asbestos fibre cement designer board /Pre Laminated self embossed texture designer board E-Board classic size 600x600mm, HPSC (High pressure steam cured)to be fixed or inserted to pre laminated GI frame work for seamless ceiling size 600mm x 600mm with main runner 38x24x0.9mm thick, cross tee 8.6x0.9mm and wall angle 19x19x0.9mm duly suspended with 6mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clipcomplete all as specified and directed. |
| 15 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 16 | S&F 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination with 5mm thick teak wood edging on one side, bottom and top and other side 10mm thick teak wood edging with rebate suitable for cup board shutter, pelmet box etc. and leaping treated with french polish complete all as specified and as directed. |
| 17 | S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap 30mm when open all as specified and directed. |
| 18 | S&F 2nd class hard wood, fancy type, plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads sectional area exc 13.0 Sqcm and n exc 25.0 Sqcm complete all as specified and directed. |
| 19 | S&F 40mm dia, cupboard knobs brass polished fixed with nut, screw and washer complete all as specified and directed. |
| 20 | S&F 100mm size brass handles, cast type, polished bright fixed with brass screws complete all as specified and directed. |
| 21 | S&F 25mm dia stainless steel drapery rod, heavy duty, fancy type with brackets & domes two in each door and window complete all as specified and directed. |
| 22 | Excavation in trenchess n.exc 1.5m wideand n.exc 1.5m in depth for foundation in hard/dense soils etc complete all as specified and directed |
| 23 | Returning, filling in(under floor), including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil all as specified and directed |
| 24 | Removing excavated soil n exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting pointcomplete all as specified and directed |
| 25 | M&L for 75mm thick PCC (1:4:8), Type D-2 (using 40mm graded crushed stone aggregates) as in sub base/levelling course etc. complete all as specified and as directed. |
| 26 | M&L for Endura coloured tiles of size 300mmx300mmx10mm thick, laid in floors etc, set & jointed in neat cementmixed with pigment to match the colour of tiles over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and directed. |
| 27 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed. |
| 28 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed. |
| 29 | S&F 3 layer PPR Polypropylene random copolymer concealed pipes of 16mmouter dia SDR7.4 (PN16) UV stabilied and antimicrobial fusion welded having thermal stability for hot & cold water supply inclduing all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors complete all as specified and directed |
| 30 | S&F 3 layer PPR Polypropylene random copolymer concealed pipes of 20mmouter dia SDR7.4 (PN16) UV stabilied and antimicrobial fusion welded having thermal stability for hot & cold water supply inclduing all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors complete all as specified and directed |
| 31 | S&Fin repair Wash Hand Basin (Vanity) long patern type of 78 cm x 48 cm including all fittingswith decorative cabinet with Door/ Shutter and 02 No drawers complete all as specified and directed. |
| 32 | S&Fin repair Vitreous Chinawash down water closet one piece pan (Pedestal pattern), white/ coloured (including all fittings, fixing bolts, flushing cistern, jet spray and flush pipe) completeall as specified and directed.Make : Jaquar Cat part No - Lys-Wht-38851S300UFSMN or tecnocommercially equivalent inKohler/ Neycer / Roca. |
| 33 | S&Ftubular holder (liquid Soap container) CP complete all as specified and directed . Make :-Jaquar Cat Part No. AKP-CHR-35741P or technocommerically equivalent make/model as approved by GE. |
| 34 | S&F single towel rail 600mm long complete all as specified and directed.Make :- Jaquar Cat Part No AKP-CHR-35711PS or technocommercially equivalent make/model as approved by GE. |
| 35 | S&F angular stop cock fancy type CP complete all as specified and directed.Make :- Jaquar Cat Part No KUP-CHR-35053PM or technocommercially equivalent make/model as approved by GE. |
| 36 | S&F toilet paper holder of stainless steel fixed to wall with chromium plated CP brass screw complete all as specified and directed Make:- Jaquar Cat Part No -AKP-CHR-35753PS or technocommercially equivalent make/model as approved by GE. |
| 37 | S&F glass shelf 600mm long 125mm wide of CP completeall as specified and directed.Make :- JaquarCat Part No ACN-CHR-1171N or techno commercially equivalent make/model as approved by GE. |
| 38 | S&F corner glass shelf ,three set type, of size 300x300mm (lower), 225x225mm (medium) & 150x150mm (upper) fixed with Cp brass scews, complete all as specified and directed. Make :- Jaquar Cat Part No ACN-CHR-1173 or technocommercially equivalent make/model as aproved by GE. |
| 39 | S&F 5.5mm thick, 900mmx600mm bevelled edge mirror of slected quality glass, mounted on wall with steel plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 40 | S&F CP Jet sparay including CP flexible pipe for EWC fixed complete all as specified and directed. |
| 41 | M&L for brickwork with old size sub class \"B\" bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and directed. |
| 42 | M&L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 43 | M&L for rendering 15mm thick in CM (1:4) on other than faces of brick work or concrete surfaces finished even and fair complete all as specified and directed. |
| 44 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of suitable primer complete all specified and directed. |
| 45 | M&L for preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed. |
| 46 | M&L for 18-20mm thick Granite (of any type) in steps, jambs, pillars, window- cills, cooking platforms and like including rounding edges, laid over and including 15mm thick bedding layer in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified & directed. |
| 47 | S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed. |
| 48 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed. |
| 49 | S&F 110mm bore PVC (SWR) branch piece single equal or unequal complete all as specified and directed. |
| 50 | S&F 75mm bore PVC (SWR) branch piece single equal or unequal complete all as specified and directed. |
| 51 | S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed. |
| 52 | S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed. |
| 53 | S&F PVC (SWR) \"S\"trap 110mm bore complete all as specified and directed. |
| 54 | S&F PVC (SWR) vent cowl any radius 110mm bore complete all as specified and directed. |
| 55 | Dismantling of cast iron or reinforced concrete drain pipes of dia 100/150mm, jointed in cement mortar and taking out of trenches/wall surface includig fittings, if required complete allspecified and directed. |
| 56 | S&F 500 litres capacity rotational moulded polye-thylene water storage tanks three layers (cylindrical vertical with closed top) hoisted and fixed in position including brass float valve all as specified in SSR Part Iincluding dismantling old unserviceable water tanks complete all as specified and directed. |
| 57 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed. |
| 58 | Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 59 | S&F 3mm thick sheet glass ordinary quality and glazing with aluminium beads in squares exceeding 0.50 Sqm in each pane complete all as specified. |
| 60 | S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed. |
| 61 | M&L for rendering 10mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even and fair complete all as specified and directed. |
| 62 | Taking down carefully existing old burn out/unserviceable copper/aluminium point wiring any type (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing old materials tfrom site and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 63 | M&L for point wiring with PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire of size 1.5 Sqmm (Nominal area) drawn through concealed in wall with heavy dutyISI markedPVC conduit of suitable size 20mm dia or PVC casing capping of suitable size over wall surfaces along with its allconnected fittings/ accessories including providing of modular type pressed steel terminal sunken boxe 1.2mm thick or PVC flush type box dully fixed concealed in wall and covered top with modular type back and face plate frame mounting switches, sockets, regulators etc and also using /drawing 1.5 sqmm PVC insulated FRLS wire, 1100 Volt grade with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making good to all disturbed surfaces of wall/ceiling and floor area of wiring system and to match the existing surface of wall/floor/ceiling etc. complete all as specified and directed for following:- |
| 64 | One light/fan point controlled by one way switch 5 Amp |
| 65 | One 3/5 pin socket outlet, 5 Amps on same board |
| 66 | One 3/5 pin socket outlet, 5 Amps on independent board |
| 67 | All as per Sl item No. 63 above but using single runs of PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire of size 2.5 Sqmm (Nominal area) power point wiring system with controlled by one wayswitch fixed on independent board and also providing of 2.5 sqmm PVC insulated FRLS wire, 1100 Volt grade with multistranded copper conductor wire used as continuous earth wire complete all as specified and directed. |
| 68 | All as per Sl item No. 63 above but using single runs of PVC insulated FRLS wire, 1100volt grade with multistranded copper conductor wire of size 4.0 Sqmm (Nominal area) power point wiring system with controlled by one wayswitch fixed on independent boardand also providing of 4.0 sqmm PVC insulated FRLS wire, 1100 Volt grade with multistranded copper conductorwire used as continuous earth wire complete all as specified and directed. |
| 69 | S&F modular type switch 5/6 Amps 230 Volts, one module for one way switching system complete as specified and directed. |
| 70 | S&F modular type socket 5/6 Amps 230 Volts, 3/5 pin type combined two module complete as specified and directed. |
| 71 | S&F modular type switch 15/16 Amps 230 Volts, one module for one way switching system complete as specified and directed. |
| 72 | S&F modular type socket 15/16 Amps 230 Volts, 3/5 pin type combined two module complete as specified and directed. |
| 73 | S&F ceiling rosethree terminals type made out ofpolycarbonate, isolated body completeall as specified and directed. |
| 74 | S&F wall mounted slim batten typedecorative integrated design LED tube light fitting of rating capacity 1 x 20W/ 22W with eletronic driver and fitting extruded body made of aluminum housing with high quality polycarbonate diffuser with long lifeenergy saving and required fitting used in both warm/white type coluor set complete including providing of suitable type of flat fexible two / three core cable for electric connection including taking down old fitting complete all as specified and directed. Make : Philips model No - BN021LED22S 6500K /4000K PSU GR, Havells modelNo.-LUMILINEPLUSNEOBS22WLED865SPCSSIND & Crompton model No-CCS-100-20-65-HL2-DP-NWH. |
| 75 | S&F recessed/ceiling concealed mounted flate unique square slim pannel integrated design LED luminaire light pannel type fitting of size 2\"x2\" of rating capacity 36W/40W decorative type with high performane LEDs andeletronic driver and extruded body made of aluminum housing with mounting slot and fully difused long life energy saving and required fitting used in both warm/white type coluor set including making extra cutting of existing hole side work of ceiling surface (if reqired at site) for setting and fixing ofnew fitting and also providing of suitable type of flat fexible two / three core cable for electric connection including taking down old fitting complete all as specified and directed. Make : Philips model No - RC375B LED 36S 865/840 PSU W60L60 52 WH/ Havells modelNo.-VENUSNE02X2PLR36WLED865 PRALMOD & Crompton model No-CCR-127-36-57-SL-NWH. |
| 76 | S&F ventilating exhaust fan made out of mild steel body complete with louvers and shutter operational of size 250mm sweep suitable to work on 230 Volts 50 Hz, 1200 RPM, coper winding including making of suitable type /size of hole on wall and fixing compete with nut, bolt etc including taking down existing fan and deposited in AGE E/M store yard all as specified and directed. |
| 77 | S&F electric water heater storage type steel body with inner tank of storage capacity 50 ltr, BEE5 star rating and heating element upto 2 KW and providing all connecting accessories and electricalconnection including taking down existing water heater and deposited in AGE E/M store yard complete all as specified and directed. |
| 78 | S&F in repair/replacement sheet metal enclosure duly powder coated with double pole and neutral enclosure with having a two pin and earth plug socket base& metal plug top and having mounting channel and complete with one MCB SPN 20 Amp and making all necessary electrical connection and dully fixed surface on wall or concealed in wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface all as required at site complete all as specified and as directed. |
| 79 | S&F in replacement sheet metal enclosure duly powder coated & framing work with locking arrangement and having double door, made out of iron clad, suitable of rating of size/type of distribution boardTPN 4 way 415 volt 3 Phase 50C/s with IP-43 1K-09protection suitable for MCCB incommer and MCB as outgoing having suitable rating of copper bus bar and suitable size of common neutral and earth link and also making all necessary electrical connection and dully fixed surface on wall or concealed in wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface complete all as specified and as directed. |
| 80 | S&F in replacement sheet metal enclosure duly powder coated with locking arrangement and having double door, distribution boardSPN 12 way having suitable rating of copper bus bar 200 Amps and suitable size of common neutral and earth link and also making all necessary electrical connection and dully fixed surface on wall or concealed in wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface complete all as specified and as directed. |
| 81 | S&F MCB SPN 40 to 63 Amps, 230 Volts, 50 Hz AC supply suitable for \"C\" series, 10 KA breaking capacity complete all as specified and directed. |
| 82 | S&F MCB SP 6 to 32 Amps, 240 Volts, 50 Hz AC supply suitable for \"C\" series, 10 KA breaking capacity complete all as specified and directed. |
| 83 | M&L for sub main wiring system with two runs PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire of size2x10Sqmm and one run of 1x10 Sqmm (Nominal area) (ISI Marked) as in earth wire any type any length drawn through in heavy dutyISI markedPVC Casing capping / PVC conduit of suitable size along with its all fittingsand connected accessories and duly fixed concealed on wall or surface on wall including taking down old sub main wiring and making good the disturbed wall surface complete all as specified and as directed.Note:- 3 runs of 10sqmm wire and one run of PVC cassing capping/conduit shall be measured and 1.0 RM. |
| 84 | S&F MCCB TPN 160Amps, 415 Volts, breaking capacity 36KA, 50 Hz AC , adjustable type complete all as specified and directed. |
| 85 | Supplying and laying 1100 volts grade LT XLPE insulated, armoured heavy duty, electric cablecross sectional area 95sqmm 3.5 core, aluminium conductor and making electric connection including taking down of old cable complete all as specified and directed. |
| 86 | Excavation in trenches/ under road/ PCC path/hard standing not exc. 1.5 m wide and n. exc. 1.5m depthfor laying of pipe / cable in soft/loosesoil and getting out complete all as specified and directed. |
| 87 | M&L for Sand cushioning for under ground cable provided with a layers ofsand before laying cable and sand after laying and stretching the cable complete all as specified and directed. |
| 88 | M&L for brick covering width equal to length of brick for mechanical protection to cable with well burnt sub class \"B\" bricks laid dry flat acomplete all as specified and directed. |
| 89 | Supply, fixing and laying GI pipe 50mm bore light grade for cable protection passing through under road, floor fixed to pole/ wall complete all as specified and directed. |
| 90 | M&L for earthing, complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (Earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connecting to the galvanised iron earth lead wire of 4mm dia by means of bolts, nuts, check nuts and washers of galavanised iron and earth strip protected by provision of GI light grade pipe 20 mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and with 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate common salt and charcoal filling test point made out of 40mm/6mm flat iron with fixing arrangement funnel wire mesh and earth work in hard dense soil returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electrical plate No 03 of SSR-2009 Part-I and connecting to earth test point complete all as specified and directed. |
| 91 | Supply, fixing, commissioning and testing of star rated wall mounted split AC, invertor based with cooling and heating function and digital inverter type complete set of hi wall split type iindoor and outdoor complete set of air conditioner unit with cardless remote control and full filling of initial refrigent gas alongwith having inbuilt heating and cooling arrangement and digital inverter twin rotary of rating capacity 2.0TR and suitable for operation of 230Volt 50Hz single phase electric supply including provn of MS stand & bracket for fixing of outdoor and indoor unit system and also providing of both type /size sunction and discharge coper refrigerant piping attachment system of any length and duly both connected it from outdoor unit to indoor unit system alongwith duly overleft it by nitrile insulation, with insulation taping work and suitable drain pipe line system upto ground level for dropping out the water outside from evaporator unit and making electric connection with three core copper cable of suitable size and making hole on wall / roof and making good all disturbed surface as per existingcomplete all as specified and directed. |
| 92 | Supply, fixing, commissioning and testing of wall mounting hanging based automatic digital operation based voltage stabilizer with copper winding based unit of single phase naturally air cooled indoor type with having digital display and suitable for operation on single phase AC supply and with having designed voltage for input & output voltage 90 volt to 230 volt with accuracy +2.5% and having low and high voltage cut low voltage cut off 90 (-) 5 volts high voltage cut off 230 V (+5) Volts along with start time delay system with time delay adjustable from 30 second to 1.5 minutes system complete unit set of rating capacity 5 KVA complete system all as specified and directed. |
| 93 | M&L for sub main wiring system with two runs PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire of size2x6Sqmm and one run of 1x6 Sqmm (Nominal area) (ISI Marked) as in earth wire any type any length drawn through in heavy dutyISI markedPVC Casing capping / PVC conduit of suitable size along with its all fittingsand connected accessories and duly fixed concealed on wall or surface on wall and making electrical connection complete all as specified and as directed.Note:- 3 runs of 6sqmm wire and one run of PVC cassing capping/conduit shall be measured and 1.0 RM. |
| 94 | S&F sheet metal enclosure duly powder coated with double pole and neutral enclosure with having a two pin and earth plug socket base& metal plug top and having mounting channel and complete with one MCB SPN 20 Amp and making all necessary electrical connection and dully fixed surface on wall or concealed in wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface all as required at site complete all as specified and as directed. |
