|
| 1 | Excavating over areas in Hard/de-nse soil, n exc 1.5 m deep and getting out as directed. |
| 2 | M&L,for Hardcore(Broken stone or boulders) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface as directed. |
| 3 | M&LCementconcreteinfoundations, fillingandmass concrete Type B2 1:2:4 (40 mm graded aggregate) and as directed. |
| 4 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar all as directed. |
| 5 | M&L Brickwork with subclass \"B\" bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 as directed. |
| 6 | M&L Rendering 10 mm thick cement plaster 1:6 on fair faces of brick work or concrete surface and rendering is to be finished even and smooth (without using extra lime or cement) as directed. |
| 7 | M&L Flat Formwork square, rectangular, polygonal to sides of pillars, posts, struts, piers, columns and stanchionsas directed |
| 8 | S&F, Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding\" with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as directed |
| 9 | S&F Mild steel round bars 6mm to 8mm dia.Fe-410-W,(Gde.E-250),quality-A or Fe 290 (Gde -E-165), cut to\"length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mrn dia or securing with clips all as directed |
| 10 | M&L for Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in Columns, pillars, piers, posts and struts as directed |
| 11 | M&L for Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in Beams, cantilevers, ressummers, lintels over 1.5m span as directed |
| 12 | M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) |
| 13 | M&L Reinforced cement concrete (nominal, mix) in Slabs supported on walls,(Type B1 1:2:4 (20 mm graded aggregate) beams and columns in floors,roofs, landings, balconies,/anopies, deck slabs and in shelves and the like as directed. |
| 14 | S&F Anodised aluminium frame for doors, windows, ventilators with one or More rebates including joining cleat for fixing etc all as directed |
| 15 | S&F Sheet glass 6.3 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 .sq. m in each pane all as directed |
| 16 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges,ariodised aluminum snap beading screws etc with powder coating of colour (as directed) (Thickness or powder coating not less than 50 micron). complete all as specified. |
| 17 | S & F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 18 | S&F,Vitrified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as directed. |
| 19 | S&F,Vitrified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, o above for work on vertical surfaces such as skirting, dados and risers to steps etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match as directed. |
| 20 | M&L,Surface preparationof new wall surfaces,Priming plastered and other surfaces with one coat alkali resistant priming paint, and applying two coat. of Distempering walls with Ditto with distemper oil emulsion. as directed. |
| 21 | M&L for preparing old surfaces of walls and Distempering one coat andsubsequent coat with distemper dry, white or tinted, as directed. |
| 22 | M& L for Preparation ofold surfaces on ceiling onold decorated surfaces and applying one coat of White wash and subsequent coat.applying two coat of Distempering walls withdistemperdry,whiteortinted. subsequentcoat.as directed. |
| 23 | M&Lfor,Preparationofnew surfacesonceilingon decorated surfaces and applying one coat of White wash andandapplyingtwocoat ofDistemperingwallswith distemper dry, white or tinted subsequent coat.as directed. |
| 24 | M & L Glazed earthenware tiles 149mmx 149mm (or 152.4 mm x 152.4 mm) x 6 mm thick, in floors, etc,set and jointed in neat cement slurry and pointed in white or coloured cement to match as directed |
| 25 | M & L Glazed earthenware tiles 149mmx 149mm (or 152.4mm x 152.4mm) x 6mm thick, in floors, etc,set and jointed in neat cement slurry and pointed in white or coloured cement to match as directed |
| 26 | S &F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe- 290(Gde E - 165) |
| 27 | Demolition Roofs, floors (other than ground floors), beams, staircases,landing,chajjasandSimilarsuspendedwork cement concrete is reinforced (reinforcement cut as required to facilitate demolition) as directed. |
| 28 | S & F Anodised aluminium snap grid frame size 605X605 mm work for false ceiling all as specified and Hangers 6 mm dia. G.I.,(upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mrn dia. 40mm long complete all as specified. |
| 29 | S&F Perforated particle board/ tiles 12 mm thick for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber frameworkor with staples on snap grid as directed |
