|
| 1 | Excavating over areas in Hard/de-nse soil,exc 1.5 m deep and getting out as directed. |
| 2 | M&L Rendering 10 mm thick cement plaster 1:6 on fair faces of brick work or concrete surface and rendering is to be finished even and smooth (without using extra lime or cement).as directed. |
| 3 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6.as directed. |
| 4 | M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) |
| 5 | M&L Formwork to sides of pillars,posts, struts, piers, columns circular on plan and stanchions as directed. |
| 6 | M&L for Mild steel TMT bars20 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.complete as directed. |
| 7 | M&L for Mild steel roundbars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.Gd.I, IS-432 (Part I) . |
| 8 | M&L for Reinforced cement concrete (nominal mix)(Type B1 1:2:420 mm graded concrete)Slabs supported on walls,beams and columns in floors,roofs, landings, blconies,canopies, deck slabs and inshelves and the like as directed. |
| 9 | M&L for Reinforced cement concrete (nominal mix)(Type B1 1:2:420 mm graded concrete) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete as directed. |
| 10 | M&L 3mm thick wall care putty on wall as directed. |
| 11 | M& L3mm thick wall care putty on ceiling as directed. |
| 12 | M&L for preparing new surfaces Preparing surfaces plastered or unplastered surfaces of walls and applying one coat and subsequent coat of ready mixed distemper oil emulsion, tinted. as directed. |
| 13 | M& L for Preparation of new plastered surfaces Washing, rubbing down and stopping of distempered and painted surfaces on ceiling andapplying one coat and subsequent coat of ready mixed distemper oil emulsion, tinted. as directed. |
| 14 | M&L Granite (of any type) work (table rubbed and polished) in steps, 20 mm thick jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite |
| 15 | S & F Joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) fe-290(Gde-E165) as directed. |
| 16 | M&L Painting of New orpreviously untreated steel surfaces of any description, not otherwise descri-bed, over 10cm width orgrith and red oxide andpainting with two coats aluminium paint .as directed. |
