Providing Furniture For 200 Bed Rural Hospital And Trauma Care Centre At Manor Dist. Palghar. Construction Of Main Building , Item , Bravo Mid Back Chair - 1.Seat / Back Assembly: The Seat And Back Should Bemade Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood And Upholstered With .Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Should Bedesigned With Contoured Lumbar Support For Extra Comfort. The Seat Has Extra Thick Foam On Front Edge To Give Comfort To Popliteal Area. Back Size 47.5 Cm. ( W ) X58.0 Cm ( H ) Seat Size 47.0 Cm. ( W ) X 48.0 Cm. ( D ) 2.. High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density = 45±2 Kg / M3 And Hardness Load 16 ± 2 Kgffor 25% Compression. 3. Armrests :The One-Piece Armrests Should Beinjection Moulded From Black Co-Polymer Polypropylene. 4. Center Tilt Synchro Mechanism: The Mechanism Should Bedesigned With The Following Features: • 360° Revolving Type. • Upright-Position Locking • Tilt Tension Adjustment • Seat / Back Tilting Ratio Of 1:3. 5.Pneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 12.0 ±0.3Cm. 6.Telescopic Bellow Assemblythe Bellow Should Be3 Piece Telescopic Type And Injection Moulded In Black Polypropylene. 7.Pedestal Assembly:The Pedestal Should Beinjection Moulded In Black 33% Glass-Filled Nylon-66 And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be66.3 ±0.5Cm. Pitch-Center Dia. ( 76.3 ±1.0Cm With Castors ) . 8.Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Moulded In Black Nylon. , Work Table Of Size Shall Be1200 Widthx 600 Depth X 740 Height . The Top Shall Be Made From 25 Mm Thick Pre- Laminated Board . Allthe Edges Are Sealed With 2 Mm Thick Pvc Edge Band All Around . Side Panels Shall Be Made From 25 Mm Thick Pre- Laminated Paticle Board . All The Edges Are Sealed With 2 Mm Thick Pvc Edge Band On Theuser Side And 0.8 Mm On The Top And Bottom Side .The Side Panels Have 2 Glide Screws Each For Levelling Of The Desk. Modestypanel Shall Be Made From 18 Mm Thick Pre- Laminated Particle Board . All The Edges Are Sealed With 0.8 Mm Thick Pvc Edge Band All Around. Freestanding Pedestal Shall Be Made From 18 Mm Pre- Laminated Particle Board With A Combination Of 2 Mm And 0.8 Mm Pvc Edge Band On All The Exposed Surfaces As Per Requirement . The Drawers Are Provided With Suitable Slides For Smooth Operation . All The Pedestal Drawers Are Centrally Locked With A Single Key . , Storwel Plain- Storwel Plain Shall Have An Overall Size Of916mm ( W ) X486mm ( D ) X1981mm ( H ) With Welded Construction. It Should Have The Shelf Thickness Of 0.7 Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm ( High Yield Strength ) And All Other Components Shall Have A Thickness Of 0.9Mm. These Components Shall Be Made Of Crca ‘D’ Grade High Yield Strength As Per Is:513. The Storwel Plain Should Have A Mazak Handle And Three Way Locking Mechanism With Shooting Bolts. It Should Have A Height Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base. The Finishing Shall Include Epoxy Powder Coated To The Thickness Of 50 Microns ( + / - 10 ) . Plenty Of Colour Options And Shelving Options Shall Be Available. , 1 ) Seat Shell : The Seat Shell Should Bea Welded Assembly Of Seat, Back And Side Frame. The Seat And Back Should Bemade Of 0.12±0.013Cm Thk Cr Steel Sheet With Oblong Perforations.They Should Bewelded To Sideframe Of Size 3.2±0.05Cm X 0.5 ± 0.05 Cm Thk Hr Steel.The Welded Assembly Should Bepowder Coated ( Dft 40-60 Microns ) . The Seat Has A Front Water Fall Edge To Provide Popliteal Clearance For Comfortable Seating. It Also Has A Buttock Support Curve That Not Only Provides Rear Support But Also Prevents Small Children From Falling Through The Gap Between Seat And Back. Clean And Flat Surfaces Of Seat And Back Aids In Easy Maintenance. Seat Size : 47.8 Cm ( W ) X 44.6 Cm ( D ) Back Size : 41.6 Cm ( W ) X 23.0 Cm ( H ) 2 ) Understructure Assembly: Understructure Assembly Consshould Be Ts Of Connecting Beam And Leg Assembly Made Of M.S. E.R.W. Oblong Tube Of Size 7.5±0.03Cm X 2.5±0.03Cm X 0.2±0.016Cm Thk.The Welded Structure Assembly Should Bepowder Coated ( Dft 40-60 Microns ) .The Leg Assembly Should Befitted With Shoes And Levellers In Nylon. The Leg Structure Should Bedesigned With Minimal Should Be A Of Contact Close To Ground Providing Easy Access For Cleaning Purposes. The Shoes Fitted To Leg Assembly Help In Aligning The Structure For Back To Back Arrangements. Levellers Take Cshould Beof Uneven Flooring.Connecting Beam Should Befitted With Snap Locking End Cap.Lt Also Aids In Side-By-Side Understructure Alignment. 3 ) Arm Rest Assembly: Armrest Assembly Consshould Be Ts Of Armrest Frame And Armrest Pad . The Armrest Frame Should Bemade Up Of Size 3.175±0.05Cm X 0.47±0.027Cm Thk Hr Steel And It Should Bepowder Coated ( Dft 40-60 Microns ) . Armrest Pad Should Beinjection Molded In Nylon And Should Befitted Onto The Armrest Frame. Overall Dimensions Of Chair Seat Height - 44.1 Cm. Height - 78.5 Cm. Width & Depth Of Chair As - Width-114.5Cm And Depth-63.8 Cm. , The Seat Shell Should Bea Welded Assembly Of Seat, Back And Side Frame. The Seat And Back Should Bemade Of 0.12±0.013Cm Thk Cr Steel Sheet With Oblong Perforations.They Should Bewelded To Sideframe Of Size 3.2±0.05Cm X 0.5 ± 0.05 Cm Thk Hr Steel.The Welded Assembly Should Bepowder Coated ( Dft 40-60 Microns ) . The Seat Has A Front Water Fall Edge To Provide Popliteal Clearance For Comfortable Seating. It Also Has A Buttock Support Curve That Not Only Provides Rear Support But Also Prevents Small Children From Falling Through The Gap Between Seat And Back. Clean And Flat Surfaces Of Seat And Back Aids In Easy Maintenance. * Seat Size : 47.8 Cm ( W ) X 44.6 Cm ( D ) * Back Size : 41.6 Cm ( W ) X 23.0 Cm ( H ) Understructure Assembly Consshould Be Ts Of Connecting Beam And Leg Assembly Made Of M.S. E.R.W. Oblong Tube Of Size 7.5±0.03Cm X 2.5±0.03Cm X 0.2±0.016Cm Thk.The Welded Structure Assembly Should Bepowder Coated ( Dft 40-60 Microns ) .The Leg Assembly Should Befitted With Shoes And Levellers In Nylon. The Leg Structure Should Bedesigned With Minimal Should Be A Of Contact Close To Ground Providing Easy Access For Cleaning Purposes. The Shoes Fitted To Leg Assembly Help In Aligning The Structure For Back To Back Arrangements. Levellers Take Cshould Beof Uneven Flooring.Connecting Beam Should Befitted With Snap Locking End Cap.Lt Also Aids In Side-By-Side Understructure Alignment .Armrest Assembly Consshould Be Ts Of Armrest Frame And Armrest Pad . The Armrest Frame Should Bemade Up Of Size 3.175±0.05Cm X 0.47±0.027Cm Thk Hr Steel And It Should Bepowder Coated ( Dft 40-60 Microns ) . Armrest Pad Should Beinjection Molded In Nylon And Should Befitted Onto The Armrest Frame. Overall Dimensions Of Chair Seat Height - 44.1 Cm. Height - 78.5 Cm. Width & Depth Of Chair As- Width-169.5Cm And Depth-63.8 Cm. , 2 Door Personal Locker Unit - 2 Door Personal Locker Unit - Product Size - 375 ( W ) X 470 ( D ) X 1950* ( H ) *Height Including Leveler * Height Of Leveler Is 50Mm And Adjustment Possible Is 15Mm. Construction & Material - Aesthetically Appealing Completely Knock Down Construction.The Add-On Units Are Stack Widthwise To Form A Row Of Lockers. ( Note- Single Main Unit Should Not Be Offered.Minimum 1Main + 1Addon To Be Offered, Maximum 1Main + 4Addon To Be Offered ) Legs Fitted With Screw Type Leveler. Made From Combination Of Top Panel ( 0.5Mm Crca ) , Side Panel ( 0.5Mm Crca ) , Bottom Panel ( 0.5Mm Crca ) , Back Panel ( 0.5Mm Crca ) , Top Bottom Stiffener ( 1.2Mm Crca ) And End Cover ( 0.5Mm Crca ) . ** -Crca D Grade As Per Is-513 -Crca D Grade As Per Is-513 Doors ( Without Envelope Slot ) - Made From 0.6Mm Thick Crca ( D Grade, Is-513 ) Soft Closing Hinge. Door Size - For 2 Door Locker - 373 ( W ) X 18 ( T ) X 948 ( H ) Shelving -It Is A 10 Bend Panel Made Of 0.5Mm Thick Crca ( D Grade, Is-513 ) Uniformly Distributed Load Capacity Of Each Shelf Is 20Kg . 3 Shelves For 2 Door Locker Without Envelope Slot Cam Lock - Oval Knob That Functions As A Handle - Click Action Mechanism - Key Removal In Locked And Unlocked Position - Zinc Alloy Die Cast Housingzinc Alloy Die Cast Housing Finish - Epoxy Polyester Powder Coated To The Thickness Of 50 Microns ( + / -10 Micron ) . , 4 Door Personal Locker Unit - 4 Door Personal Locker Unit - Product Size - 375 ( W ) X 470 ( D ) X 1950* ( H ) *Height Including Leveler * Height Of Leveler Is 50Mm And Adjustment Possible Is 15Mm. Construction & Material - Aesthetically Appealing Completely Knock Down Construction.The Add-On Units Are Stack Widthwise To Form A Row Of Lockers. ( Note- Single Main Unit Should Not Be Offered.Minimum 1Main + 1Addon To Be Offered, Maximum 1Main + 4Addon To Be Offered ) Legs Fitted With Screw Type Leveler. Made From Combination Of Top Panel ( 0.5Mm Crca ) , Side Panel ( 0.5Mm Crca ) , Bottom Panel ( 0.5Mm Crca ) , Back Panel ( 0.5Mm Crca ) , Top Bottom Stiffener ( 1.2Mm Crca ) And End Cover ( 0.5Mm Crca ) . ** -Crca D Grade As Per Is-513 -Crca D Grade As Per Is-513 Doors ( Without Envelope Slot ) - Made From 0.6Mm Thick Crca ( D Grade, Is-513 ) Soft Closing Hinge. Door Size -For 4 Door Locker - 373 ( W ) X 18 ( T ) X 473 ( H ) Shelves -It Is A 10 Bend Panel Made Of 0.5Mm Thick Crca ( D Grade, Is-513 ) Uniformly Distributed Load Capacity Of Each Shelf Is 20Kg . 3 Shelves For 4 Door Locker Without Envelope Slot Cam Lock - Oval Knob That Functions As A Handle - Click Action Mechanism - Key Removal In Locked And Unlocked Position - Zinc Alloy Die Cast Housingzinc Alloy Die Cast Housing Finish - Epoxy Polyester Powder Coated To The Thickness Of 50 Microns ( + / -10 Micron ) . , L43 Sofa 3 Seater- Back: ( W ) 52.0 Cm X ( H ) 59.0Cm X 6.0Cm ( T ) , Seat : ( W ) 52.0Cm X ( D ) 50.0Cm X 6.0Cm ( T ) , Overall Dimensions Of Chair Seat Height - 43.5 Cm. , Height - 78.5Cm , Width & Depth Of Chair As- Width-164.0Cm And Depth-70.0 Cm. Seat Size: 52.0Cm. ( W ) X 50.0Cm. ( D ) X 6.0Cm. ( T ) Backrest Assembly:The Backrest Assembly Should Beflexing Type And Consshould Be Ts Of A Fabricated Inner-Frame Assembly Insitu-Moulded With High Resilience ( Hr ) Polyurethane Foam Having Density = 45 +1- 2 Kg / M3 With Hardness Load 14 ± 2 Kgffor 25% Compression Of The Foam. The Complete Moulded Backrest Assembly Should Becovered With A Replaceable Fabric Upholstery Cover. *Back Size: 52.0Cm. ( W ) X 59.0Cm. ( H ) X 6.0Cm. ( T ) 5 ) Adj. Glides: The Adjustable Glide Should Beinjection Moulded In Black Nylon & Fitted To The Front End Of Side Frame Assembly Along With Abs Moulded Adjustable. , L-Shape Cabin Main Table 1500Mm X 750Mm . Side Table -900Mm X 450Mm , Cabin High Back Chair - Seat / Back Assembly: The Seat And Back Should Bemade Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood And Upholstered With .Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Should Bedesigned With Contoured Lumbar Support For Extra Comfort. The Seat Has Extra Thick Foam On Front Edge To Give Comfort To Popliteal Area. Back Size 47.5 Cm. ( W ) X 69.5 Cm ( H ) Seat Size 47.0 Cm. ( W ) X 48.0 Cm. ( D ) High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density = 45±2 Kg / M3 And Hardness Load 16 ± 2 Kgffor 25% Compression. Armrests :The One-Piece Armrests Should Beinjection Moulded From Black Co-Polymer Polypropylene. Center Tilt Synchro Mechanism: The Mechanism Should Bedesigned With The Following Features: • 360° Revolving Type. • Upright-Position Locking • Tilt Tension Adjustment • Seat / Back Tilting Ratio Of 1:3. Pneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 12.0 ±0.3Cm. Telescopic Bellow Assemblythe Bellow Should Be3 Piece Telescopic Type And Injection Moulded In Black Polypropylene. Pedestal Assembly:The Pedestal Should Beinjection Moulded In Black 33% Glass-Filled Nylon-66 And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be66.3 ±0.5Cm. Pitch-Center Dia. ( 76.3 ±1.0Cm With Castors ) . Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Moulded In Black Nylon. Overall Dimensions Of Chair Seat Height - Min 42.5 To Max 54.5Cm. Height - Min97.0 To Max 109.0Cm. Width & Depth Of Chair As Measured From Pedestal - Width-76.3 Cm And Depth-76.3 Cm. , Cabin Visitor Chair Seat / Back Assembly: The Seat And Back Should Bemade Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood And Upholstered With .Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Should Bedesigned With Contoured Lumbar Support For Extra Comfort. The Seat Has Extra Thick Foam On Front Edge To Give Comfort To Popliteal Area. Back Size 47.5 Cm. ( W ) X58.0 Cm ( H ) Seat Size 47.0 Cm. ( W ) X 48.0 Cm. ( D ) High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density = 45±2 Kg / M3 And Hardness Load 16 ± 2 Kgffor 25% Compression. Armrests :The One-Piece Armrests Should Beinjection Moulded From Black Co-Polymer Polypropylene. Tubular Frame: The Powder Coated ( Dft 40-60 Microns ) Tubular Frame Should Becantilever Type & Made Of 0 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. M.S. Er.W. Tube. Overall Dimensions Of Chair Seat Height - 46.5Cm. Height - 89.5Cm. Width & Depth Of Chair As Measured From Pedestal - Width-61.4 Cm And Depth-64.5 Cm. , Cafeteria Table - Time Out 4 Seater Pu Coated Size Shall Be1135 Width Mmx 1175 Depth Mmx 750 Height Mm. Top Shall Be 25 Mm Thick Base Material Shall Be 25 Mm Mdf Board . On Top Pu Painting Of Minimum 2H Hardness With 75% Glass As Per Color Chart .Combination Color Graphics On The Centre . Brown Laminate On Bottom Specially Profiled Edges For Comfort . The Understructure Shall Be Having Bend Pipe Structure Of Ms Powder Coated . Pipe Dia 38 Mm , 2 Mm Thick And It Shall Be Fitted With Top By Ss Machine Screws . Legs Shall Be Of Ms Powder Coated And 38 Mm Dia. Pipe Legs Are Fixed With Inderstructure And Table Top . Glide Shall Be Of Plastic Fixed At The Understructure To Prevent The Damage Of Table Top During Stacking . , Time Out 6 Seater Pu Coated Size Shall Be1734 Width Mmx 1175 Depth Mmx 750 Height Mm.Top Shall Be 25 Mm Thick Base Material Shall Be 25 Mm Mdf Board . On Top Pu Painting Of Minimum 2H Hardness With 75% Glass As Per Color Chart .Combination Color Graphics On The Centre . Brown Laminate On Bottom Specially Profiled Edges For Comfort . The Understructure Shall Be Having Bend Pipe Structure Of Ms Powder Coated . Pipe Dia 38 Mm , 2 Mm Thick And It Shall Be Fitted With Top By Ss Machine Screws . Legs Shall Be Of Ms Powder Coated And 38 Mm Dia. Pipe Legs Are Fixed With Inderstructure And Table Top . Glide Shall Be Of Plastic Fixed At The Understructure To Prevent The Damage Of Table Top During Stacking . , Cafeteria Chair - The Seat And Back Should Bemade Up Of Injection Moulded Indoor Grade Polypropylene Compound Seat Size : 52.5 Cm. ( W ) X 53.2 Cm. ( D ) Back Size : 51.6 Cm. ( W ) X 40.5 Cm. ( H ) The Powder Coated ( Dft 50±10 Microns ) Welded Tubular Frame Should Bemade From 0 2.22 ± 0.03 Cm X 0.16 ± 0.0128 Cm And 3.5 ± 0.03 Cm X 1.5 ± 0.03 Cm X 0.16 ± 0.0128 Cm Mserw Tube. The Shoes Should Bemade Of Indoor Grade Polypropylene Compound And Snap Fitted With Tubular Frame. Overall Dimensions Of Chair Seat Height - 45.0 Cm. Height - 84.5Cm. Width-52.5 Cm And Depth-55.8 Cm. , Storage Room - Optimizer Push Pull System On Rail Optimizer Plus-Pushpull ( 1200Mmw X 400Mmd X1980mmh ) Optz Plus Single Static1 -1No Optz Plus Single Last - 1No Optz Plus Twin Mobilesolid Back Panel- 3 Nos , Rectangular Workstation - 4Ft X 2 Ft Providing And Placing Wish Spine And Fin Based Modular Workstation, With Partition Thickness As 52.4 Mmthk And Ht - 1200 Including Powder Coated Aluminium Trims. Fin:Out Of 22.5 Mm Thk Panel Formed Out Of Blocks Which Are 18 Mm Thk Plb Boards Wrapped With Laminate Or Fabric At Intermediate Level. Top Block Finished In Fabric Magneticfinish. Bottom Block Is Finished In Metal Finish. Split Tiles On Main Spine: Combination Of Two Finishes For The Top Tiles On The User Side Shall Be Split Fabric Magnetic Along With Split White Board. Intermediate Blocks On Main Spine Intermediate Blocks Are Given In Fabric + Dl Finsh. Wire Management Through Main Spine- Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks. Half Screen With Frame - At Intermediate Position Between 2 People And At The End Above Worktop In Fabric Tackblefinsh. Legs - Metal Powder Coated Legs At The End And Shared Condition. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look. Worksurface - Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1350 Mm W X 600 Mm D. Pedestals With Or Without Legs - Wish Top Supporting Pedestal Flat Metal Front, Full Ht Free Standing Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Ht 3Dr = 2Box+1File. Cpu Trolley - With Castors Kbpt Withmousetray - Metal Note: All Partitions And Side Panels Have Levelling Screws For Adjustment In Case Of Uneven Floor To Take Care Of + / - 40 Mm Of Uneven Flooring. , Pentagonal Workstation - 5 Ft X 5Ft Penta Workstations - 1500 X 1500 X 600 Providing And Placing Wish Panel & Tile Based Modular Workstation, With Partition Thickness As 52.4 Mmthk And Ht -1200 Including Powder Coated Aluminium Trims. Fin:Out Of 22.5 Mm Thk Panel Formed Out Of Blocks Which Are 18 Mm Thk Plb Boards Wrapped With Laminate At Intermediate Level. Top Block Finished In Fabric Finish. Bottom Tile Is Finished In Metal Finish. Tiles On Main Spine: Combination Of Top Tiles Are Fabric Magneitc & White Board. Bottom Tiles - Plain Metal. Intermediate Blocks On Main Spine Intermediate Blocks Are Given In Dl + Dl Finsh. Wire Management Through Main Spine- Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks. Half Screen With Frame - At Intermediate Position Between 2 People And At The End Above Worktop In Frosted Glass Finsh. Legs -Metal Powder Coated Legs At The End And Shared Condition. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look. Worksurface - Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1500 Mm W1 X 1500 Mm W2 X 600 Mm D. Pedestals With Or Without Legs - Nova Pedestal Flat Metal Front, Full Ht Free Standing Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Ht 3Dr = 2Box+1File. Cpu Trolley - With Castors Kbpt With Mousetray -Metal Note: All Partitions And Side Panels Have Levelling Screws For Adjustment In Case Of Uneven Floor To Take Care Of + / - 40 Mm Of Uneven Flooring. , Single Bed For Staff ( Rest Room ) - Overall Size: Width - 2050.0 Mm Depth - 973.0 Mm Height - 720.0 Mm.Material :Headboard Panels Are Made Of 18 Mm Thick Prelaminated Particle Board.All The Exposed Edges Are Edge Banded With 2 Mm Thick Pvc Edge Banding.Bed Leg Frame Structure Consist Of Metal Frames Made Of M.S. 50X 25 Mm Box Section In 1.2 Thickness Internal Pipes Made Of 19 X 19 Mm Box Section In 0.9 Mm Thickness. Headboard Pipes Are Made Of 25 X 25 Mm Box Section In 0.9 Mm Thickness. Mattress Holding Bkt Is Made Of 0.6 Mm Crca Sheet.Hardware :The High Quality Hardware Used .Construction: Knock Down Construction.Packets: 1 Packet. Finish:18 Mm Thick Prelaminated Particle Board . Bed Leg Frame Structure Are Powder Coated In Thickness Of 50 Microns ( +-10 ) . Rest All Metals Are Powder Coated In Thickness Of 50 Microns ( +-10 ) . Certifications - Green Pro Certified , Single Mattress For Staff Bed - Mattress For Single Bedsize - 78 Inch. X 36 Inch X 4 Inch Thickness Thickness 50 Mm.Quilting Material-Pu Foam.Density Of Quilting Material ( ± 2 Kg / M3 ) -18 Kg / M3.Mattress Top-Box Type. Cover-Fabric Composition-Polyester.Mattress Cover-Printed , Pillow For Staff Bed- Pillow With Fabric Upholstered Having Size = 60Cm X 40Cm , Examination Table On Ratchet With No Storage: Overall Dimension-1830Mm Xw600mm X H 850 Mm. The Backrest Has Ratchet Mechanism For Tilting The Backrest. Leg Frames & Intermediate Frames Is Made Of Erw Tubes Having Section Of 30 X 30 Square Tubes With Thickness Of 1.6Mm. Nylon 6 Leg Shoes Is Given To Avoid Wear & Tear. Ms Sheet Metal Lying Surface Of Thickness 1.2Mm Is Used. Top Sheet Metal Panel Base Frame Of 25 X 25 Erw Square Tubes Of Thickness 1.6Mm Is Used. Ratchet Is Of Ms Strip With Section 40 X 4 To Provision The Backrest Tilt.All Ms Part Are Pre Treated And Powder Coated With Ral White Color & All Plastic Parts In Grey. Safe Working Load Is 135Kg. , Examination Table On Ratchet Mattress 30 Mm : Overall Dimension Should Be 1833 Mm ( L ) X 600 Mm ( W ) X 30 Mm ( H ) . The Examination Table Is Provided With40 Density 30Mm Thick Pu Foam Mattress Which Is Covered By Heavy Helium Material Which Is Water Proof, Flame Retardant, Vapour & X-Ray Permeable. The Zip & Stitches For The Mattress Cover Is Concealed. The Mattress Foam And Cover To Be Divided In 2 Sections. , Stretcher On Trolley: Overall Dimension Should Be 2005 Mm ( L ) X 666 Mm ( W ) X 827 Mm ( H ) . It Should Be Removable Stretcher On Trolley Mointed On Castors.. The Trolley Should Be Made Of 31.75 Mm & 25.5 Mm Dia 1.2 Mm Thick & 1.6 Mm Thick Erw Tube. The Casters Should Be 200 Mm Dia Diagonal Lockable Castors. Stretcher Understructure Should Be Made Of 25.4 Mm Dia 1.6 Mm Thick Erw Tube And The Top Should Be Made Of 1.2 Mm Thick Crca Sheet. The Stretcher Should Have Provision To Mount Iv Pole At Four Corners. The Product Should Be Pre Treated And Powder Coated With Epoxy Polyster Powder Coating.The Maximum Load Bearing Capacity Should Be 135 Kg , Rectangular Workstation - 4Ft X 2 Ft Providing And Placing Wish Spine And Fin Based Modular Workstation, With Partition Thickness As 52.4 Mmthk And Ht - 1200 Including Powder Coated Aluminium Trims. Fin:Out Of 22.5 Mm Thk Panel Formed Out Of Blocks Which Are 18 Mm Thk Plb Boards Wrapped With Laminate Or Fabric At Intermediate Level. Top Block Finished In Fabric Magneticfinish. Bottom Block Is Finished In Metal Finish. Split Tiles On Main Spine: Combination Of Two Finishes For The Top Tiles On The User Side Shall Be Split Fabric Magnetic Along With Split White Board. Intermediate Blocks On Main Spine Intermediate Blocks Are Given In Fabric + Dl Finsh. Wire Management Through Main Spine- Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks. Half Screen With Frame - At Intermediate Position Between 2 People And At The End Above Worktop In Fabric Tackblefinsh. Legs - Metal Powder Coated Legs At The End And Shared Condition. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look. Worksurface - Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1350 Mm W X 600 Mm D. Pedestals With Or Without Legs - Wish Top Supporting Pedestal Flat Metal Front, Full Ht Free Standing Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Ht 3Dr = 2Box+1File. Cpu Trolley - With Castors Kbpt Withmousetray - Metal Note: All Partitions And Side Panels Have Levelling Screws For Adjustment In Case Of Uneven Floor To Take Care Of + / - 40 Mm Of Uneven Flooring. , Pentagonal Workstation - 5 Ft X 5Ft Penta Workstations - 1500 X 1500 X 600 Providing And Placing Wish Panel & Tile Based Modular Workstation, With Partition Thickness As 52.4 Mmthk And Ht -1200 Including Powder Coated Aluminium Trims. Fin:Out Of 22.5 Mm Thk Panel Formed Out Of Blocks Which Are 18 Mm Thk Plb Boards Wrapped With Laminate At Intermediate Level. Top Block Finished In Fabric Finish. Bottom Tile Is Finished In Metal Finish. Tiles On Main Spine: Combination Of Top Tiles Are Fabric Magneitc & White Board. Bottom Tiles - Plain Metal. Intermediate Blocks On Main Spine Intermediate Blocks Are Given In Dl + Dl Finsh. Wire Management Through Main Spine- Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks. Half Screen With Frame - At Intermediate Position Between 2 People And At The End Above Worktop In Frosted Glass Finsh. Legs -Metal Powder Coated Legs At The End And Shared Condition. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look. Worksurface - Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1500 Mm W1 X 1500 Mm W2 X 600 Mm D. Pedestals With Or Without Legs - Nova Pedestal Flat Metal Front, Full Ht Free Standing Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Ht 3Dr = 2Box+1File. Cpu Trolley - With Castors Kbpt With Mousetray -Metal Note: All Partitions And Side Panels Have Levelling Screws For Adjustment In Case Of Uneven Floor To Take Care Of + / - 40 Mm Of Uneven Flooring. , Multipurpose Chair - The Seat And Back Should Bemade Up Of Injection Moulded Indoor Grade Polypropylene Compound Seat Size : 52.5 Cm. ( W ) X 53.2 Cm. ( D ) Back Size : 51.6 Cm. ( W ) X 40.5 Cm. ( H ) The Powder Coated ( Dft 50±10 Microns ) Welded Tubular Frame Should Bemade From 0 2.22 ± 0.03 Cm X 0.16 ± 0.0128 Cm And 3.5 ± 0.03 Cm X 1.5 ± 0.03 Cm X 0.16 ± 0.0128 Cm Mserw Tube. The Shoes Should Bemade Of Indoor Grade Polypropylene Compound And Snap Fitted With Tubular Frame. Overall Dimensions Of Chair Seat Height - 45.0 Cm. Height - 84.5Cm. Width-52.5 Cm And Depth-55.8 Cm. , Rectangular Workstation - 4Ft X 2 Ft Providing And Placing Wish Spine And Fin Based Modular Workstation, With Partition Thickness As 52.4 Mmthk And Ht - 1200 Including Powder Coated Aluminium Trims. Fin:Out Of 22.5 Mm Thk Panel Formed Out Of Blocks Which Are 18 Mm Thk Plb Boards Wrapped With Laminate Or Fabric At Intermediate Level. Top Block Finished In Fabric Magneticfinish. Bottom Block Is Finished In Metal Finish. Split Tiles On Main Spine: Combination Of Two Finishes For The Top Tiles On The User Side Shall Be Split Fabric Magnetic Along With Split White Board. Intermediate Blocks On Main Spine Intermediate Blocks Are Given In Fabric + Dl Finsh. Wire Management Through Main Spine- Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks. Half Screen With Frame - At Intermediate Position Between 2 People And At The End Above Worktop In Fabric Tackblefinsh. Legs - Metal Powder Coated Legs At The End And Shared Condition. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look. Worksurface - Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1350 Mm W X 600 Mm D. Pedestals With Or Without Legs - Wish Top Supporting Pedestal Flat Metal Front, Full Ht Free Standing Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Ht 3Dr = 2Box+1File. Cpu Trolley - With Castors Kbpt Withmousetray - Metal Note: All Partitions And Side Panels Have Levelling Screws For Adjustment In Case Of Uneven Floor To Take Care Of + / - 40 Mm Of Uneven Flooring. , Pentagonal Workstation - 5 Ft X 5Ft Penta Workstations - 1500 X 1500 X 600 Providing And Placing Wish Panel & Tile Based Modular Workstation, With Partition Thickness As 52.4 Mmthk And Ht -1200 Including Powder Coated Aluminium Trims. Fin:Out Of 22.5 Mm Thk Panel Formed Out Of Blocks Which Are 18 Mm Thk Plb Boards Wrapped With Laminate At Intermediate Level. Top Block Finished In Fabric Finish. Bottom Tile Is Finished In Metal Finish. Tiles On Main Spine: Combination Of Top Tiles Are Fabric Magneitc & White Board. Bottom Tiles - Plain Metal. Intermediate Blocks On Main Spine Intermediate Blocks Are Given In Dl + Dl Finsh. Wire Management Through Main Spine- Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks. Half Screen With Frame - At Intermediate Position Between 2 People And At The End Above Worktop In Frosted Glass Finsh. Legs -Metal Powder Coated Legs At The End And Shared Condition. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look. Worksurface - Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1500 Mm W1 X 1500 Mm W2 X 600 Mm D. Pedestals With Or Without Legs - Nova Pedestal Flat Metal Front, Full Ht Free Standing Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Ht 3Dr = 2Box+1File. Cpu Trolley - With Castors Kbpt With Mousetray -Metal Note: All Partitions And Side Panels Have Levelling Screws For Adjustment In Case Of Uneven Floor To Take Care Of + / - 40 Mm Of Uneven Flooring. , Acuprm Plus Xp 5Fmotorblomo Twcl: Fully Automatic Embedded Control Intensive Care Unit Bed. The Bedis Provided With 4 Nos Pp Moulded Side Boards With Full Coverage To Bed. These Side Boards Should Be Integrated With Drop Down Mechanism For Easy Operation. The Embedded Control Panels Are Placed: 4 No’S At The Head End Sideboards ( 2 For Attendant & 2 For Patient ) . Nurse Embedded Panel Should Have Features Like Height, Backrest, Leg Rest, Tr / Atr, Auto Contour, Under Bed Light ( Ubl ) , Cpr, Lock Function, Power And Battery Indicator, Single Touch Cardiac Chair And Emergency Head Low Position / Shock Position. Patient Embedded Panel Should Have Features Like Height, Backrest, Leg Rest, Auto Contour, Single Touch Cardiac Chair And Ubl. Pp Moulded Easily Removable Headboard And Leg-Board. Head Board And Foot Board Should Be With Metal Inserts To Mount It On Bed Frame. Removable Pp Head Board And Foot Board Should Have Cut Out , For Better Gripping. Bed With 3 Nos Removable Pp Lying Surface ( Pelvic, Upper Leg And Lower Leg Rest ) . Backrest Is X-Ray Permeable With Cassette Holder Made Of Compact Laminate. Bed Frame Should Be Made Of Ms Erwtube Of Size 50Mmx25mm Of 2 Mm Thick Supported With Erw Square Tube With 25 Mm X 25 Mm And 1.2 Mm Thick. Base Frame Made Of Ms Erw Tube Of Size 30Mmx60mm Of 2Mm Thick. Base Framehave Ground Clearance Of Greater Than 150 Mm To Avoid Any Obstruction During Bed Movement. Base Framehave Provision To Mount Oxygen Cylinder Cage As Optional Accessory. It Should Have Angle & Trendelenburg Indicator Guide. Bed With 4 Nos Tpe ( Thermoplastic Eleastomer ) Bumpers To Absorb Shock . Bed With Manual And Automatic Cpr Lever, Bed Is With Manual Dvt Position On Ratchet. The Bed Has Powder Coated Urine Bag Holder On Both Side Of The Bed For Ease Of Accessibility..All Metal Componentsare Pre-Treated With Zinc Phosphating In 7 Tank Process And Then Powder Coated With Epoxy Polyester Powder Coating. Technical Details: ·Overall Length: 2241Mm ·Overall Width :1050Mm ·Height Range: 430 Mm To 755 Mm Without Mattress. ·Trendelenburg: 0°-13.5° ( + / -1° ) ·Reverse Trendelenburg: 0°-13.5° ( + / -1° ) · Backrest Angle ( Max. ) : 0°-65° ( + / -5° ) ·Leg Rest Angle ( Max. ) : 0°-30° ( + / -5° ) · Castor Diameter: 125Mm · Under Bed Clearance: 150Mm ·Safe Working Load ( With Accessories ) : 215Kg The Bedprovidedwith 125Mm Plastic Injection Moulded Twin Wheel Castors. With Central And Directional Locking Facility. The Castors Are Provided With An Auxiliary Brake Made Of Ms Round Tube. It Has Accessories Like Urine Bag Holders; Electrical Details: . Classification: Class 1 · Electrical Shock Protection: Type B ·Liquid Ingress Protection: Actuators - Ipx4 ·Control Box - Ipx6 Washable: ·Battery ( Optional ) – Ipx6 ( Optional ) ·Batteries: Lead Acid Battery, Rechargeable, 1.2-Amp Hrs / 28.8Wh. . Bed Should Have The Liquid Ingress Protection As Per Ipx4. , Acura Mattress 100Mm : The Mattress Should Be Size- ( L ) 1950Mm* ( W ) 853Mm* ( H ) 100 Mm.The Mattress Is Provided With 40 Density 100 Mm Thick Pu Foam Mattress With Ridges For Easy Bending. It Is Covered By Heavy Helium Material Which Is Water Proof, Flame Retardant, Vapour & X-Ray Permeable With Bacteriostatic Properties. The Zip & Stitches For The Mattress Cover Is Concealed. , Aptis Over Bed Table Height Adjustable On Gas Lift With Membrane Top: Over Bed Table With Height Adjustale Feature.Overall Dimension Should Be ( L ) 896 Mm X ( W ) 395 Mm X ( H ) Adjustable From 800 Mm To 1083Mm .Table Top Height Can Be Adjusted With The Help Of Operating Lever Which Activates The Gas Spring. Base Frame Is Made Of Erw Round Tube With 50.8 Mm Dia And 1.6 Mm Thickness.Housing Is Made Of Aluminium Extruded Inner And Outer Tubes.Handle For Gas Spring Made Of Ms Sheet Metal Of Section 74 Mm X 115 Mm With 3 Mm Thick Handle With Crca Material Making Strong Lever And Have Provision Ofwider Area For Grip.Gas Spring Of Length 835 Mm And Stroke Of 293 Mm. Smooth Functioning Gas Spring With Adjustable Height And Consistent Motion During Operation. Effort Level To Push Downward = 14.5 ( -2Kg ) At Room Temp 29°C. Plain Top Made Of Membrane Pressed Mdf With Section 395 Mm X 896 Mm Of 18 Mm Thickness. Membrane Pressed Mdf Board Of Frosty White Shade On Top Surface And With Edge Lipping.Top: Mdf Top With Membrane Press , Should Giveanti Scratch Property With Good Surface Finish. Castors: High Endurance Anti-Static, Plastic Injection Molded Castors Are Provided Of Ø50mm. All Metal Parts Should Be Pre Treated And Powder Coated With Epoxy Polyster..Max Safe Working Load: 20 Kg Udl. Goods Aresupplied In Knocked Down Construction To Reduce Carbon Emission. , Infusion Pole Assly Adjustable With 2 Hooks: Fixed Tube Assembly Of Ss 304 Tube With Dia. 31.75Mm And 1.6Mm Thickness. Heavy Duty Height Adjustable Iv Pole With Ss 304 Make Mounting On Bed. It Has Glossy Mirror Finish. The Maximum Sale Working Load Is 3Kg Per Hook For Saline Bag. 9Kg Including Syringe Pump 7 Infusion Pump, Device Mounted On Fixed Tube. Hook Arm Arm Pcd Dia. 366Mm And The Overall Height Is From 855 Mm To 1358Mm. The Knob Is Made Up Of Nylon With Threaded Stem. , Aptis Locker With One Drawer & Cabinet: The Bedside Locker Has Single Drawer And Cabinet With Lock And With Plastic Molded Handle. There Is Space Between Plastic Top And The Cabinet To Keep The General Items For The Frequent Use. Cabinet Is Provisionided With Lock To Keep The Valuable Items For The Safety. Overall Dimensions Should Be 490Mmw X 410Mm D X 941Mm H Corner Tube Made Of Erw Round Tube With Section 25.4 Mm Dia Of 1.2 Mm Thickness Cabinet Made Of Crca Sheet Of 0.8 Mm Thick Provided With Lock. ( 470 Mm X 410 Mm X 382 Mm ) Top Made Of Abs Of 2.2 Mm Thick. Top Has Recessed And Contoured Shape For Better Aesthetic And Usability. Plastic Molded Knob Is Provisionided With Matt Finish And Dome Shaped For Better Grip. Plastic Molded Castors With 50 Mm Dia Placed In Diagonal Locking Arrangement. Ral White, Plastic Parts In Grey. 5 Kg Udl On Both The Tops And 10 Kg In The Cabinet. All Metal Componentsare Pre Treated With Zinc Phosphating In 7 Tank Process And Then Powder Coated With Anti Microbialepoxy Polyester Powder Coatingto Fulfill The Requirements For Bacterial Protection Against At Least 2 Commonly Found Bacteria In Hospital Environment [ Gram Positive And Gram Negative ] . Goods Are Supplied In Knocked Down Construction To Reduce Carbon Emission. , Staff Chair - Bravo Mid Back Chair - 1.Seat / Back Assembly: The Seat And Back Should Bemade Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood And Upholstered With .Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Should Bedesigned With Contoured Lumbar Support For Extra Comfort. The Seat Has Extra Thick Foam On Front Edge To Give Comfort To Popliteal Area Back Size 47.5 Cm. ( W ) X58.0 Cm ( H ) Seat Size 47.0 Cm. ( W ) X 48.0 Cm. ( D ) 2.. High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density = 45±2 Kg / M3 And Hardness Load 16 ± 2 Kgffor 25% Compression. 3. Armrests :The One-Piece Armrests Should Beinjection Moulded From Black Co-Polymer Polypropylene. 4. Center Tilt Synchro Mechanism: The Mechanism Should Bedesigned With The Following Features: • 360° Revolving Type. • Upright-Position Locking • Tilt Tension Adjustment • Seat / Back Tilting Ratio Of 1:3. 5.Pneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 12.0 ±0.3Cm. 6.Telescopic Bellow Assemblythe Bellow Should Be3 Piece Telescopic Type And Injection Moulded In Black Polypropylene. 7.Pedestal Assembly:The Pedestal Should Beinjection Moulded In Black 33% Glass-Filled Nylon-66 And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be66.3 ±0.5Cm. Pitch-Center Dia. ( 76.3 ±1.0Cm With Castors ) . 8.Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Moulded In Black Nylon. , Rectangular Workstation - 4Ft X 2 Ft Providing And Placing Wish Spine And Fin Based Modular Workstation, With Partition Thickness As 52.4 Mmthk And Ht - 1200 Including Powder Coated Aluminium Trims. Fin:Out Of 22.5 Mm Thk Panel Formed Out Of Blocks Which Are 18 Mm Thk Plb Boards Wrapped With Laminate Or Fabric At Intermediate Level. Top Block Finished In Fabric Magneticfinish. Bottom Block Is Finished In Metal Finish. Split Tiles On Main Spine: Combination Of Two Finishes For The Top Tiles On The User Side Shall Be Split Fabric Magnetic Along With Split White Board. Intermediate Blocks On Main Spine Intermediate Blocks Are Given In Fabric + Dl Finsh. Wire Management Through Main Spine- Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks. Half Screen With Frame - At Intermediate Position Between 2 People And At The End Above Worktop In Fabric Tackblefinsh. Legs - Metal Powder Coated Legs At The End And Shared Condition. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look. Worksurface - Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1350 Mm W X 600 Mm D. Pedestals With Or Without Legs - Wish Top Supporting Pedestal Flat Metal Front, Full Ht Free Standing Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Ht 3Dr = 2Box+1File. Cpu Trolley - With Castors Kbpt Withmousetray - Metal Note: All Partitions And Side Panels Have Levelling Screws For Adjustment In Case Of Uneven Floor To Take Care Of + / - 40 Mm Of Uneven Flooring. , Pentagonal Workstation - 5 Ft X 5Ft Penta Workstations - 1500 X 1500 X 600 Providing And Placing Wish Panel & Tile Based Modular Workstation, With Partition Thickness As 52.4 Mmthk And Ht -1200 Including Powder Coated Aluminium Trims. Fin:Out Of 22.5 Mm Thk Panel Formed Out Of Blocks Which Are 18 Mm Thk Plb Boards Wrapped With Laminate At Intermediate Level. Top Block Finished In Fabric Finish. Bottom Tile Is Finished In Metal Finish. Tiles On Main Spine: Combination Of Top Tiles Are Fabric Magneitc & White Board. Bottom Tiles - Plain Metal. Intermediate Blocks On Main Spine Intermediate Blocks Are Given In Dl + Dl Finsh. Wire Management Through Main Spine- Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks. Half Screen With Frame - At Intermediate Position Between 2 People And At The End Above Worktop In Frosted Glass Finsh. Legs -Metal Powder Coated Legs At The End And Shared Condition. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look. Worksurface - Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1500 Mm W1 X 1500 Mm W2 X 600 Mm D. Pedestals With Or Without Legs - Nova Pedestal Flat Metal Front, Full Ht Free Standing Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Ht 3Dr = 2Box+1File. Cpu Trolley - With Castors Kbpt With Mousetray -Metal Note: All Partitions And Side Panels Have Levelling Screws For Adjustment In Case Of Uneven Floor To Take Care Of + / - 40 Mm Of Uneven Flooring. , Fully Motorised Icu Bed With Remote Control Panels Five Electric Operated Features Are Backrest, Leg Rest , High-Low, Trendelenburg, Reverse Trendelenburg ( Only One Handset Will Be Provided ) . The Bed Is Provided With 4 Nos Pp Side Boards With Full Coverage To Bed. These Side Boards Should Be Integrated With Drop Down Mechanism For Easy Operation. Pp Moulded Easily Removable Headboard And Leg-Board. Head Board And Foot Board Should Be With Metal Inserts To Mount It On Bed Frame. Removable Pp Head Board And Foot Board Should Have Cut Out , For Better Gripping. Bed With 3 Nos Removable Pp Lying Surface ( Pelvic, Upper Leg And Lower Leg Rest ) . Backrest Is X-Ray Permeable With Cassette Holder Made Of Compact Laminate. Bed Frame Should Be Made Of Ms Erwtube Of Size 50Mmx25mm Of 2 Mm Thick Supported With Erw Square Tube With 25 Mm X 25 Mm And 1.2 Mm Thick. Base Frame Made Of Ms Erw Tube Of Size 30Mmx60mm Of 2Mm Thick. Base Framehave Ground Clearance Of Greater Than 150 Mm To Avoid Any Obstruction During Bed Movement. Base Frame Have Provision To Mount Oxygen Cylinder Cage As Optional Accessory. It Should Have Angle & Trendelenburg Indicator Guide. Bed With 4 Nos Tpe ( Thermoplastic Eleastomer ) Bumpers To Absorb Shock . Bed With Manual And Automatic Cpr Lever, Bed Is With Manual Dvt Position On Ratchet. The Bed Has Powder Coated Urine Bag Holder On Both Side Of The Bed For Ease Of Accessibility. All Metal Components Are Pre-Treated With Zinc Phosphating In 7 Tank Process And Then Powder Coated With Epoxy Polyester Powder Coating. Technical Details: ·Overall Length: 2241Mm ·Overall Width: 1050Mm ·Height Range: 440 Mm To 770 Mm Without Mattress. ·Trendelenburg: 0°-13.5° ( + / -1° ) ·Reverse Trendelenburg: 0°-13.5° ( + / -1° ) · Backrest Angle ( Max. ) : 0°-65° ( + / -5° ) ·Leg Rest Angle ( Max. ) : 0°-30° ( + / -5° ) ·Castor Diameter: 125Mm ·Under Bed Clearance: 150Mm ·Safe Working Load ( With Accessories ) : 200Kg The Bedprovidedwith 125Mm Plastic Injection Moulded Twin Wheel Castors With Diagonal Locking Facility. It Has Accessories Like Urine Bag Holders; Electrical Details: . Classification: Class 1 · Electrical Shock Protection: Type B · Liquid Ingress Protection: Actuators - Ipx4 · Control Box - Ipx6 Washable: · Battery ( Optional ) – Ipx6 ( Optional ) · Batteries: Lead Acid Battery, Rechargeable, 1.2-Amp Hrs / 28.8Wh.Bed Should Have The Liquid Ingress Protection As Per Ipx4. , Oxygen Cylinder Trolley: Ms Oxygen Cylinder Trolley Suitable For B Type Oxygen Cylinder. The Overall Dimension Should Be 410 Mm ( L ) X 375 Mm ( W ) X 1112 Mm ( H ) . The Main Frame Should Made Of 25.4 Mm Dia 1.6 Mm Thick Erw Tube With 10 Mm Dia Ms Made Locking Rod To Keep The Cylinder Position During Transit.The Trolley Should Be Provided With 100 Mm Dia 25 Mm Thick Pu Wheel For Longer Durability. Ldpe Made Leg Bush Should Be Provided On The Legs. Max Load Bearing Capacity Should Be 50 Kg. , Aptis Locker With Cabinet Only : Thebedside Locker Have Cabinet With Lock And With Plastic Molded Handle. There Is Space Between Plastic Top And The Cabinet To Keep The General Items For The Frequent Use. Cabinet Is Provisionided With Lock To Keep The Valuable Items For The Safety. Overall Dimensions Should Be 404Mm W X 402Mm D X 835Mm H Corner Tube Made Of Erw Round Tube With Section 25.4 Mm Dia Of 1.2 Mm Thickness Cabinet Made Of Crca Sheet Of 0.8 Mm Thick Provided With Lock. ( 470 Mm X 410 Mm X 382 Mm ) Top Made Of Abs Of 2.2 Mm Thick. Top Has Recessed And Contoured Shape For Better Aesthetic And Usability. Plastic Molded Knob Is Provisionided With Matt Finish And Dome Shaped For Better Grip. Plastic Molded Castors With 50 Mm Dia Placed In Diagonal Locking Arrangement. Ral White, Plastic Parts In Grey. 5 Kg Udl On Both The Tops And 10 Kg In The Cabinet. All Metal Components Are Pre Treated With Zinc Phosphating In 7 Tank Process And Then Powder Coated With Anti Microbialepoxy Polyester Powder Coatingto Fulfill The Requirements For Bacterial Protection Against At Least 2 Commonly Found Bacteria In Hospital Environment [ Gram Positive And Gram Negative ] . Goods Are Supplied In Knocked Down Construction To Reduce Carbon Emission. , Chrysalis Nova Activ Iccu With Cpr &Twin Wheel Central Locking Castors: 1. 7 Function Bed, 6 Embedded Control Panel + 1 Act Panel Intensive Care Unit Bed With Back Rest Up Down, Knee Rest Up-Down, Trendelenburg And Reverse Trendelenburg, Hi-Low Position, Lateral Tilt Controlled Through Electro Mechanical Actuators Operated Using Soft Touch Control Panel. 2. The Embedded Control Panels Are Placed: 4 No’S At The Head Boards And 2 No’S At The Leg Boards. Nurse Embedded Panel Should Have Features Like Backrest, Leg-Rest, High-Low, Tr / Atr, Auto Cpr, Single Button Cardiac Chair Position, Shock Position, Auto-Contour Andlocking Features. Patient Embedded Panel Should Have Features Like Backrest, Leg-Rest, High-Low. 3. The Digital Attendant Control Touch Panel Mounted On Leg-Board Can Be Used To Operate Functions Such As Backrest, Leg-Rest, High-Low, Tr / Atr, Auto Cpr, Single Button Cardiac Chair Position, Shock Position, Lateral Tilt, Auto-Contour , Weight Measurement, Under Bed Light, Out Of Bed Alarm & Locking Features. The Lateral Tilt Feature Can Only Be Operated When The Sideboards Are Up / Engagged To Prevent Patient Fall, When The Lateral Tilt Orientation Is Shifting From Right To Left / Left To Right There Should Be A Pause Of 4 Seconds And Beep Sound As A Safety Feature. 4. Base Frame Is Made Of 30Mmx 60Mm 2Mm Thick Ms Crca Rectangular Tube With The Bed Frame Of 50X 25Mm And 40 X20mm, 2Mm Thick Ms Crca Rectangular Tube. 5. The Embedded Control Panel Iccu Bed Has Four Section Lying Surface With Abs Vacuum Formed With Antimicrobial Property Which Should Be Easily Removable, Washable To Maintain Hygiene With Integrated Mattress Retainer. 6. The Bed Has Four Numbers Of Pp Moulded Side Boards With Embedded Control Panels ( 2 No’S For Patient And 4 No’S For Attendant ) And Drop-Down Mechanism, Completely Collapsible , 7.The Side Boards Should Be Air Mattress Comaptible And Height Of The Side Boards Should Be More Than 400 Mm 8. There Are 4 Nos Of Bumpers Given At The Four Corners Made Up Of Tpe ( Thermo Plastic Elastomer ) With Excellent Shock Absorbing Property. 9. There Are Two Nos Of Cpr Lever, One At Either Side Of The Bed For Quick Release Of The Back Rest During Emergencies. 10. In Order To Achieve The Deep Vein Thrombosis ( Dvt ) Position, The Lower Leg Rest Portion Of The Bed Frame Has The Provision Of A Ms Zinc Plated Ratchet. The Ratchet Is Adjustable In Five Different Positions. 11. Technical Details: · Overall Length: <2200Mm · Overall Length ( With Extended ) : <2380Mm · Overall Width :1010Mm · Height Range: 500 Mm To 860 Mm Without Mattress. · Trendelenburg: 0°-15° ( + / -1° ) · Reverse Trendelenburg: 0°-15° ( + / -1° ) ·Backrest Angle ( Max. ) : 0°-66° ( + / -5° ) · Leg Rest Angle ( Max. ) : 0°-24° ( + / -5° ) · Lateral Tilt: 0-17° ( + / -2° ) · Castor Diameter: 125Mm · Under Bed Clearance: 150Mm · Safe Working Load ( With Accessories ) : 250Kg 12. The Bed Shoud Have Single Button Auto Contour, Single Button Shock Position And Single Button Cardiac Chair Position On Embedded Panels. 13. The Bed Has A Double Auto Regression Feature During Backrest Operation To Minimize Abdominal Pressure Of The Patient. 14. The Head Board And Leg Board Are Of With 3Mm Wall Thickness. The Head Board, Leg Board & Side Boards Has Provision For Colour Stickers & Made Of Moulded Pp With Antibacterial Additives. Both The Head & Leg Board Are Removable Without Locking Mechanism For Ease Of Use During Emergency. 15. There Are Four Nos Of Nylon Moulded Patient Lifting Pole Holders And Heavy Duty Saline Stand Holders Provided At The Four Corners Of The Bed. 16. The Bed Is Provided With 125Mm Plastic Injection Moulded Twin Wheel Castors With Central And Directional Locking Facility. The Castors Are Providedwith An Auxiliary Brake Made Of Ms Round Tube. 17. It Has Accessories Like Urine Bag Holders; Ms Chrome Plated Linen Tray And Provisions For Bed Extension Up To 180Mm. 19. Electrical Details: . Classification: Class 1 · Electrical Shock Protection: Type B · Liquid Ingress Protection: Actuators - Ipx4 · Control Box - Ipx6 Washable: · Battery ( Optional ) – Ipx6 · Battery Type ( Optional ) : Lead Acid Battery, Rechargeable, 1.2-Amp Hrs / 28.8Wh. 20. All The Ms Parts Are Treated With Seven Pre-Treatment Procedures With Zinc Phosphate And Powder Coated With Antimicrobial And Thermosetting Epoxy Polyester To Control The Bacterial Growth. 21. Bed Is Provided With Telescopic Heavy-Duty Iv Pole. This Ss Made Iv Pole Is Of Ms Frame And Ss Made Saline Stand Which Can Be Fitted On The Bed. 22. The Bed Has Provision For Patient Retainers. 23. Ingress Protection Of Bed Should Be Ipx4. 24. The Bed Should Have Weight Measurement System Consisting Of 4 Numbers Shear Beam Load Cells & Linak® Scale System Compatible With Linak® Open-Bus Platform. The Weight Management System Should Have The Following Features: 1 ) Measuring Range: 0 To A Max 250 Kg Load On Application ( Swl ) 2 ) Safety Key- Magnetic Safe Key To Activate Act For Weight Management, Trend / Anti-Trend, Lateral Tilt, Cardiac Chair Position & Out Of Bed Alarm. 3 ) Accuracy Adjustment: 100 Or 500 Gm Of Measured Weight 4 ) Auto Compensation Feature 5 ) Reset / Zero Adjustment ( To Omit Weight Of Mattress ) = 50 Kg 6 ) Out Of Bed Detection / Alarm Feature For Patient Leaving The Bed. 7 ) Weight Unit Selection: Kg / Lbs. , Chrysalis Mattress: The Bed Is Provided With 40 Density 100 Mm Thick Pu Foam Mattress Which Iscovered By Heavy Helium Material Which Is Water Proof, Flame Retardant, Vapour & X-Ray Permeable. The Zip & Stitches For The Mattress Cover Isconcealed. The Mattress Should Be Size- 1900 Mm ( L ) X 840 Mm ( W ) X 100Mm ( H ) . , Chrysalis Mattress Extension: The Bed Is Provided With 40 Density 100 Mm Thick Pu Foam Mattress Which Iscovered By Heavy Helium Material Which Is Water Proof, Flame Retardant, Vapour & X-Ray Permeable. The Zip & Stitches For The Mattress Cover Isconcealed. The Mattress Should Be Size-1900 Mm ( L ) X 840 Mm ( W ) X 100Mm ( H ) . , Aptis Locker With Two Drawer & Cabinet: Thebedside Lockerhas Two Drawer And Cabinet With Lock And With Plastic Molded Handle. . Cabinet Is Provided With Lock To Keep The Valuable Items For The Safety. Overall Dimensions Should Be 490Mmw X 410Mm D X 941Mm H Corner Tube Made Of Erw Round Tube With Section 25.4 Mm Dia Of 1.2 Mm Thickness Cabinet Made Of Crca Sheet Of 0.8 Mm Thick Provisionided With Lock. ( 470 Mm X 410 Mm X 382 Mm ) Top Made Of Abs Of 2.2 Mm Thick. Top Has Recessed And Contoured Shape For Better Aesthetic And Usability. Plastic Molded Knob Is Provisionided With Matt Finish And Dome Shaped For Better Grip. Plastic Molded Castors With 50 Mm Dia Placed In Diagonal Locking Arrangement. Ral White, Plastic Parts In Grey. 5 Kg Udl On Both The Tops And 10 Kg In The Cabinet. All Metal Componentsare Pre Treated With Zinc Phosphating In 7 Tank Process And Then Powder Coated With Anti Microbialepoxy Polyester Powder Coatingto Fulfill The Requirements For Bacterial Protection Against At Least 2 Commonly Found Bacteria In Hospital Environment [ Gram Positive And Gram Negative ] . Goods Are Supplied In Knocked Down Construction To Reduce Carbon Emission. , Rectangular Workstation - 4Ft X 2 Ft Providing And Placing Wish Spine And Fin Based Modular Workstation, With Partition Thickness As 52.4 Mmthk And Ht - 1200 Including Powder Coated Aluminium Trims. Fin:Out Of 22.5 Mm Thk Panel Formed Out Of Blocks Which Are 18 Mm Thk Plb Boards Wrapped With Laminate Or Fabric At Intermediate Level. Top Block Finished In Fabric Magneticfinish. Bottom Block Is Finished In Metal Finish. Split Tiles On Main Spine: Combination Of Two Finishes For The Top Tiles On The User Side Shall Be Split Fabric Magnetic Along With Split White Board. Intermediate Blocks On Main Spine Intermediate Blocks Are Given In Fabric + Dl Finsh. Wire Management Through Main Spine- Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks. Half Screen With Frame - At Intermediate Position Between 2 People And At The End Above Worktop In Fabric Tackblefinsh. Legs - Metal Powder Coated Legs At The End And Shared Condition. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look. Worksurface - Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1350 Mm W X 600 Mm D. Pedestals With Or Without Legs - Wish Top Supporting Pedestal Flat Metal Front, Full Ht Free Standing Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Ht 3Dr = 2Box+1File. Cpu Trolley - With Castors Kbpt Withmousetray - Metal Note: All Partitions And Side Panels Have Levelling Screws For Adjustment In Case Of Uneven Floor To Take Care Of + / - 40 Mm Of Uneven Flooring. , Pentagonal Workstation - 5 Ft X 5Ft Penta Workstations - 1500 X 1500 X 600 Providing And Placing Wish Panel & Tile Based Modular Workstation, With Partition Thickness As 52.4 Mmthk And Ht -1200 Including Powder Coated Aluminium Trims. Fin:Out Of 22.5 Mm Thk Panel Formed Out Of Blocks Which Are 18 Mm Thk Plb Boards Wrapped With Laminate At Intermediate Level. Top Block Finished In Fabric Finish. Bottom Tile Is Finished In Metal Finish. Tiles On Main Spine: Combination Of Top Tiles Are Fabric Magneitc & White Board. Bottom Tiles - Plain Metal. Intermediate Blocks On Main Spine Intermediate Blocks Are Given In Dl + Dl Finsh. Wire Management Through Main Spine- Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks. Half Screen With Frame - At Intermediate Position Between 2 People And At The End Above Worktop In Frosted Glass Finsh. Legs -Metal Powder Coated Legs At The End And Shared Condition. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look. Worksurface - Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1500 Mm W1 X 1500 Mm W2 X 600 Mm D. Pedestals With Or Without Legs - Nova Pedestal Flat Metal Front, Full Ht Free Standing Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Ht 3Dr = 2Box+1File. Cpu Trolley - With Castors Kbpt With Mousetray -Metal Note: All Partitions And Side Panels Have Levelling Screws For Adjustment In Case Of Uneven Floor To Take Care Of + / - 40 Mm Of Uneven Flooring. , Acura Prime Motorized 5Function Xp With Pp Sideboards And Head / Foot Boards: Fully Motorised Icu Bed With Remote Control Panels Five Electric Operated Features Are Backrest, Leg Rest , High-Low, Trendelenburg, Reverse Trendelenburg ( Only One Handset Will Be Provided ) . The Bed Is Provided With 4 Nos Pp Side Boards With Full Coverage To Bed. These Side Boards Should Be Integrated With Drop Down Mechanism For Easy Operation. Pp Moulded Easily Removable Headboard And Leg-Board. Head Board And Foot Board Should Be With Metal Inserts To Mount It On Bed Frame. Removable Pp Head Board And Foot Board Should Have Cut Out , For Better Gripping. Bed With 3 Nos Removable Pp Lying Surface ( Pelvic, Upper Leg And Lower Leg Rest ) . Backrest Is X-Ray Permeable With Cassette Holder Made Of Compact Laminate. Bed Frame Should Be Made Of Ms Erwtube Of Size 50Mmx25mm Of 2 Mm Thick Supported With Erw Square Tube With 25 Mm X 25 Mm And 1.2 Mm Thick. Base Frame Made Of Ms Erw Tube Of Size 30Mmx60mm Of 2Mm Thick. Base Framehave Ground Clearance Of Greater Than 150 Mm To Avoid Any Obstruction During Bed Movement. Base Frame Have Provision To Mount Oxygen Cylinder Cage As Optional Accessory. It Should Have Angle & Trendelenburg Indicator Guide. Bed With 4 Nos Tpe ( Thermoplastic Eleastomer ) Bumpers To Absorb Shock . Bed With Manual And Automatic Cpr Lever, Bed Is With Manual Dvt Position On Ratchet. The Bed Has Powder Coated Urine Bag Holder On Both Side Of The Bed For Ease Of Accessibility. All Metal Components Are Pre-Treated With Zinc Phosphating In 7 Tank Process And Then Powder Coated With Epoxy Polyester Powder Coating. Technical Details: ·Overall Length: 2241Mm ·Overall Width: 1050Mm ·Height Range: 440 Mm To 770 Mm Without Mattress. ·Trendelenburg: 0°-13.5° ( + / -1° ) ·Reverse Trendelenburg: 0°-13.5° ( + / -1° ) · Backrest Angle ( Max. ) : 0°-65° ( + / -5° ) ·Leg Rest Angle ( Max. ) : 0°-30° ( + / -5° ) ·Castor Diameter: 125Mm ·Under Bed Clearance: 150Mm ·Safe Working Load ( With Accessories ) : 200Kg The Bedprovidedwith 125Mm Plastic Injection Moulded Twin Wheel Castors With Diagonal Locking Facility. It Has Accessories Like Urine Bag Holders; Electrical Details: . Classification: Class 1 · Electrical Shock Protection: Type B · Liquid Ingress Protection: Actuators - Ipx4 · Control Box - Ipx6 Washable: · Battery ( Optional ) – Ipx6 ( Optional ) · Batteries: Lead Acid Battery, Rechargeable, 1.2-Amp Hrs / 28.8Wh.Bed Should Have The Liquid Ingress Protection As Per Ipx4. , Oxygen Cylinder Case Is Fitted At Base Frame On Head Side Of Icu Bed And Provides The Safe Housing To Oxygen Cylinder. ( L ) 840 Mm X ( W ) 213 Mm X ( H ) 165 Mm. , Rectangular Workstation - 4Ft X 2 Ft Providing And Placing Wish Spine And Fin Based Modular Workstation, With Partition Thickness As 52.4 Mmthk And Ht - 1200 Including Powder Coated Aluminium Trims. Fin:Out Of 22.5 Mm Thk Panel Formed Out Of Blocks Which Are 18 Mm Thk Plb Boards Wrapped With Laminate Or Fabric At Intermediate Level. Top Block Finished In Fabric Magneticfinish. Bottom Block Is Finished In Metal Finish. Split Tiles On Main Spine: Combination Of Two Finishes For The Top Tiles On The User Side Shall Be Split Fabric Magnetic Along With Split White Board. Intermediate Blocks On Main Spine Intermediate Blocks Are Given In Fabric + Dl Finsh. Wire Management Through Main Spine- Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks. Half Screen With Frame - At Intermediate Position Between 2 People And At The End Above Worktop In Fabric Tackblefinsh. Legs - Metal Powder Coated Legs At The End And Shared Condition. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look. Worksurface - Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1350 Mm W X 600 Mm D. Pedestals With Or Without Legs - Wish Top Supporting Pedestal Flat Metal Front, Full Ht Free Standing Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Ht 3Dr = 2Box+1File. Cpu Trolley - With Castors Kbpt Withmousetray - Metal Note: All Partitions And Side Panels Have Levelling Screws For Adjustment In Case Of Uneven Floor To Take Care Of + / - 40 Mm Of Uneven Flooring. , Pentagonal Workstation - 5 Ft X 5Ft Penta Workstations - 1500 X 1500 X 600 Providing And Placing Wish Panel & Tile Based Modular Workstation, With Partition Thickness As 52.4 Mmthk And Ht -1200 Including Powder Coated Aluminium Trims. Fin:Out Of 22.5 Mm Thk Panel Formed Out Of Blocks Which Are 18 Mm Thk Plb Boards Wrapped With Laminate At Intermediate Level. Top Block Finished In Fabric Finish. Bottom Tile Is Finished In Metal Finish. Tiles On Main Spine: Combination Of Top Tiles Are Fabric Magneitc & White Board. Bottom Tiles - Plain Metal. Intermediate Blocks On Main Spine Intermediate Blocks Are Given In Dl + Dl Finsh. Wire Management Through Main Spine- Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks. Half Screen With Frame - At Intermediate Position Between 2 People And At The End Above Worktop In Frosted Glass Finsh. Legs -Metal Powder Coated Legs At The End And Shared Condition. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look. Worksurface - Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1500 Mm W1 X 1500 Mm W2 X 600 Mm D. Pedestals With Or Without Legs - Nova Pedestal Flat Metal Front, Full Ht Free Standing Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Ht 3Dr = 2Box+1File. Cpu Trolley - With Castors Kbpt With Mousetray -Metal Note: All Partitions And Side Panels Have Levelling Screws For Adjustment In Case Of Uneven Floor To Take Care Of + / - 40 Mm Of Uneven Flooring. , Seat Assembly: The Seat Assembly Is Made Of Polyurethane Foam Moulded With M.S. Tubular Frame Insert Which Is Upholstered With Foam Laminated Fabric. The Insert Is Tubular Frame Made Of Ø1.9 ±0.02Cm X 0.16 ±0.013Cm Thk Ms. E.R.W Round Tube With Flexible Support Straps Running Across The Length And Width Of The Frame.The Seat Has An Auto-Tipup Feature Making It Stay In Upright Position When Not In Use Enabling Clear Row Passage. * Approx. Seat Size : 45.5Cm ( W ) X 46.5Cm ( D ) . 2. Backrest Assembly: The Back Assembly Has A Flexi Back Mechanism. It Is Made Of Polyurethane Foam Moulded With M.S. Tubular Frame Insert, Upholstered With Foam Laminated Fabric And Has A Plastic Back Cover. The Insert Is A Tubular Frame Made Of Ø1.9 ±0.02Cm X 0.16 ±0.013Cm Thk M.S.E.R.W Round Tube With Flexible Support Straps Running Across The Length And Width Of The Frame. * Approx. Back Size : Mid Back- 45.5Cm ( W ) X 70.4Cm ( H ) . 3. High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Is Moulded With Density = 45 + / -3 Kg / M³. 4. Side Panel / Aisle Panel:The Chair Rests On The Ground On Two Side Panels Fabricated Using 8.0±0.03Cm X 4.0±0.03Cm X 0.12±0.0096Cm And 5.0±0.03Cm X 2.5±0.03Cm X 0.12±0.0096Cm M.S. Erw Tubes Which Are Co2- Argon Welded. The Side Panel Frame Is Grouted To The Floor Using 2 Nos. Of Anchors For Each Panel Through M.S. Bush Which Are Welded To 5.0±0.03Cm X 2.5±0.03Cm X 0.12±0.0096Cm Tube. The Anchor Bolts Are Covered With Polypropylene Foundation Bolt Cover. 5. Pp Armrest With Cup Holder : The Armrest Is Made Up Of Compounded Polypropylene. The Armrest Is Fitted With The Side Panel. 6. Powder Coating: Steel Components Are Epoxy Polyester Powder Coated ( Dft 40-60 Microns ) . 7. Flooring Pre - Requisite : The Auditorium Chair Is Designed To Get Mounted / Grouted On Floors With Flooring Specification As Mentioned In Flooring Pre-Requisite. , Acura Prime Motorized 5Function Xp With Pp Sideboards And Head / Foot Boards: Fully Motorised Icu Bed With Remote Control Panels Five Electric Operated Features Are Backrest, Leg Rest , High-Low, Trendelenburg, Reverse Trendelenburg ( Only One Handset Will Be Provided ) . The Bed Is Provided With 4 Nos Pp Side Boards With Full Coverage To Bed. These Side Boards Should Be Integrated With Drop Down Mechanism For Easy Operation. Pp Moulded Easily Removable Headboard And Leg-Board. Head Board And Foot Board Should Be With Metal Inserts To Mount It On Bed Frame. Removable Pp Head Board And Foot Board Should Have Cut Out , For Better Gripping. Bed With 3 Nos Removable Pp Lying Surface ( Pelvic, Upper Leg And Lower Leg Rest ) . Backrest Is X-Ray Permeable With Cassette Holder Made Of Compact Laminate. Bed Frame Should Be Made Of Ms Erwtube Of Size 50Mmx25mm Of 2 Mm Thick Supported With Erw Square Tube With 25 Mm X 25 Mm And 1.2 Mm Thick. Base Frame Made Of Ms Erw Tube Of Size 30Mmx60mm Of 2Mm Thick. Base Framehave Ground Clearance Of Greater Than 150 Mm To Avoid Any Obstruction During Bed Movement. Base Frame Have Provision To Mount Oxygen Cylinder Cage As Optional Accessory. It Should Have Angle & Trendelenburg Indicator Guide. Bed With 4 Nos Tpe ( Thermoplastic Eleastomer ) Bumpers To Absorb Shock . Bed With Manual And Automatic Cpr Lever, Bed Is With Manual Dvt Position On Ratchet. The Bed Has Powder Coated Urine Bag Holder On Both Side Of The Bed For Ease Of Accessibility. All Metal Components Are Pre-Treated With Zinc Phosphating In 7 Tank Process And Then Powder Coated With Epoxy Polyester Powder Coating. Technical Details: ·Overall Length: 2241Mm ·Overall Width: 1050Mm ·Height Range: 440 Mm To 770 Mm Without Mattress. ·Trendelenburg: 0°-13.5° ( + / -1° ) ·Reverse Trendelenburg: 0°-13.5° ( + / -1° ) · Backrest Angle ( Max. ) : 0°-65° ( + / -5° ) ·Leg Rest Angle ( Max. ) : 0°-30° ( + / -5° ) ·Castor Diameter: 125Mm ·Under Bed Clearance: 150Mm ·Safe Working Load ( With Accessories ) : 200Kg The Bedprovidedwith 125Mm Plastic Injection Moulded Twin Wheel Castors With Diagonal Locking Facility. It Has Accessories Like Urine Bag Holders; Electrical Details: . Classification: Class 1 · Electrical Shock Protection: Type B · Liquid Ingress Protection: Actuators - Ipx4 · Control Box - Ipx6 Washable: · Battery ( Optional ) – Ipx6 ( Optional ) · Batteries: Lead Acid Battery, Rechargeable, 1.2-Amp Hrs / 28.8Wh.Bed Should Have The Liquid Ingress Protection As Per Ipx4. , Document Holder: Overall Sizes ( L ) 464 Mm X ( W ) 137 Mm X ( H ) 344 Mm. Wire Mesh Made Of Ms Rod Of Dia 6Mm & Front Cover Ms Sheet Of Thickness 0.6Mm. Product Should Be Pre Treated And Powder Coated With Epoxy Polyster Powder Coating , Over Bed Table With Height Adjustale Feature.Overall Dimension Should Be ( L ) 896 Mm X ( W ) 395 Mm X ( H ) Adjustable From 800 Mm To 1083Mm .Table Top Height Can Be Adjusted With The Help Of Operating Lever Which Activates The Gas Spring. Base Frame Is Made Of Erw Round Tube With 50.8 Mm Dia And 1.6 Mm Thickness.Housing Is Made Of Aluminium Extruded Inner And Outer Tubes.Handle For Gas Spring Made Of Ms Sheet Metal Of Section 74 Mm X 115 Mm With 3 Mm Thick Handle With Crca Material Making Strong Lever And Have Provision Ofwider Area For Grip.Gas Spring Of Length 835 Mm And Stroke Of 293 Mm. Smooth Functioning Gas Spring With Adjustable Height And Consistent Motion During Operation. Effort Level To Push Downward = 14.5 ( -2Kg ) At Room Temp 29°C. Plain Top Made Of Membrane Pressed Mdf With Section 395 Mm X 896 Mm Of 18 Mm Thickness. Membrane Pressed Mdf Board Of Frosty White Shade On Top Surface And With Edge Lipping.Top: Mdf Top With Membrane Press , Should Giveanti Scratch Property With Good Surface Finish. Castors: High Endurance Anti-Static, Plastic Injection Molded Castors Are Provided Of Ø50mm. All Metal Parts Should Be Pre Treated And Powder Coated With Epoxy Polyster..Max Safe Working Load: 20 Kg Udl. Goods Aresupplied In Knocked Down Construction To Reduce Carbon Emission.
