|
| 1 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. including carriage of materials within all leads and lifts. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10sqm on plan) including getting out and disposal of excavated earth complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge - All work up to plinth level:- 1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20mm nominal size) complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge. |
| 5 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 6 | Providing and fixing HDF decorative laminate core board German flooring AC4 class 32, 7mm thick placed over cushion of 2mm thick expended polethene foam plus 100Microne thick polethene sheet under lay No. 045 Beech West including border of required shade and colour complete in all respect upto all floor levels as per direction of Engineer in charge including carriage of material in all leads and lifts. |
| 7 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately):- 2nd class deodar wood. |
| 8 | Providing and fixing 19mm thick commercial board in shelves/box for cup board with butt joints and fixing with nails and screws etc complete including carriage of materials within all leads and lifts |
| 9 | Providing and fixing 9 mm thick commercial ply of standred quality of approved shade and colour in paneling and wall lining with butt jointing and nails (Frame work for base to be measured and paid for separately) including carriage of materials within all leads and lifts. |
| 10 | Providing and fixing 12mm thick pine wood plank of approved shade and colour in ceiling including mitring at junctions, butt jointing and nails complete (frame work for base to be measured and paid for separately)including carriage of material within all leads and lifts. |
| 11 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality:- 1.0 mm thick complete including carriage of materials within all leads and lifts. |
| 12 | Providing and fixing 35mm thick panelled glazed or panelled and glazed shutters for doors windows and clerestory windows Including black enamelled iron butt hinges with necessary screws etc. complete including carriage of materials within all leads and lifts in 2nd class deodar wood. |
| 13 | Providing and fixing galvanised M.S. wire gauge of I.S. gauge designation No. 140g to doors, window and clerestory windows with wire of dia 0.71mm instead of I.S. gauge designation No. 85g with wire of dia 0.56mm including carriage of materials within all leads and lifts. |
| 14 | Providing and laying granite stone of approved shade in flooring 20mm (average) thickness base of cement mortar 1:3 (1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete in 20mm thick including carriage of materials within all leads and lifts. |
| 15 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete including carriage of materials within all leads and lifts. |
| 16 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete including carriage of materials within all leads and lifts:- Hot finished welded type tubes. |
| 17 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.60 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 18 | Providing precoated Tata Liner sheet in wall lining/ ceiling including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.40 mm thick with zinc coating not less than |
| 19 | Providing and fixing M.S. BP Sheet 2mm thick in eaves board/ facia/ soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in charge (Base members of steel work shall be measured and paid separtely) including carriage of materials within all leads and lifts. |
| 20 | Polishing two or more coats with PU polish of required shade on New wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including carriage of materials in all leads and lifts. |
| 21 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 5.0 mm thick glass panes completeincluding carriage of materials within all leads and lifts. |
| 22 | Polishing one or more coats with PU polish of required shade on old wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including carriage of materials in all leads and lifts. |
| 23 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade one or more coats on old work complete including carriage of materials within all leads and lifts. |
| 24 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coatof approved brand and manufactureincluding carriage of materials within all leads and lifts. |
| 25 | Painting steel work with Deluxe Multi Surface Paint of required shade. Two or more coatof approved brand and manufactureincluding carriage of materials within all leads and lifts. |
| 26 | Finishing walls with Acrylic Smooth exterior paint of required shade complete including carriage of materials within all leads and lifts:- Old work (One or more coat applied complete including carriage of materials in all leads and lifts. |
| 27 | Removing dry or oil bound distemper water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete including carriage of materials in all leads and lifts. |
| 28 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of materials within all leads and lifts. |
| 29 | Providing and laying vitrified floor tiles of450mm X 450mm sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete . |
| 30 | Providing and laying vitrified tiles of 450mm X 450mm sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. |
| 31 | Dismantling steel work in single sections including dismembering and stacking the materials within all leads and lifts, carriage of material as per direction of Engineer-in-charge:- Channels, angles, tees and flats andincluding dismembering. |
| 32 | Refixing of old M.S. welded mesh 25mm X 25mm X 3mm thick as per approveddesigncomplete by welding with electrical plant complete including applyingpriming coat of red lead paint as per HP.PWD. Specification 1990 Volume-I and including carriage of materials upto all leads and lifts by mechanical means and manual labour and as directed by the Engineer in Charge.(labour rate) |
| 33 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50m initial lead, for all leads including all lifts involved complete including carriage of materials within all leads and lifts. |
| 34 | Cuting & Refixing of steel work .In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete including carriage of materials within all leads and lifts.(Labour Rate) |
| 35 | Providing and fixing high pressure PVC (Finolex) type-B spigot and socket, waste and ventilating pipes including collar and clamps ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:-(i) 110mm dia. |
| 36 | Providing and fixing PVC (Finolex) plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- 110mm nominal size. |
| 37 | Providing and fixing PVC (Finolex) collar ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- 110mm nominal size. |
| 38 | Providing and Fixng 150mm size M.S heavy duty hinges ISI marked anodised complete including carriage of materials within all leads and lifts |
| 39 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete as per direction of Engineer-in- charge including carriage of materials within all leads and lifts.size 400x16mm. |
| 40 | Providing and fixing ISI marked oxidised M.S. tower bolts with nuts and screws etc. complete as per direction of Engineer-in- charge including carriage of materials within all leads and lifts.size 300x10mm. |
