|
| 1 | Taking down cement or cement lime plaster on brick walls incl racking out joints hacking for key scrubbing down with water etc and removing the debries outside the MOD land complete all as specified and as directed by Engr -in - Charge. |
| 2 | M&L for Brick work with subclass B bricks, staright or curved on plan exc 6.00 mtr mean radius, built in 1:4 cement mortar including dismantling complete all as specified and as directed by Engr-In-Charge. |
| 3 | M&L for rendering CM (1:6) 15 mm thick on other than fair faces of brick work or concrete surfaces etc includingfinished even and smooth without using extra cement up to four storey height bldg complete all as specified and directed by Engr In Charge. |
| 4 | M & L for rendering 10mm thick on ceiling in cement mortar 1:3 finished fair and even smooth without using extra cement complete all as specified and directed by Engr In Charge. |
| 5 | M&L for preparation ofnewly plastered or unplastered surface and applying two coats of distemper oil emulsion on walls over a coat of primer incl 3mm thick wall or ceiling care putty on walls complete all as specified and directed by Engr-In-Charge. |
| 6 | M&L for prepration ofold plastered or unplastered surfaces of walls and applying two coat of approved shade of oil emulsion distemper with 3mm thick elastomeric wall care putty on walls, including repairing of pot holes and cracks with putty, take it plaster where it required complete all as specified and directed by Engr-in-Charge. |
| 7 | M&L for preparation on old plastered or unplatered surfaces of walls and applying two coat of exterior Apex/weather coat over a coat of primer any tint (colour as approved by GE) over putty including preparation of surface of wall, band/chajja/balcony up to four storey height buildingcomplete all as specified and dircted by Engineer in charge. |
| 8 | Taking down Chowkats or frames with shutters (without taking off shutters from the frame) area exc 1.5 sqmand notn.exc 4.0 sqm (including make good with CM 1:4 and hold fast) complete all as specified and directed by Engr In Charge. |
| 9 | .All as per item No 8 above. Butnot exc 1.5 Sqm . |
| 10 | S&F aluminium powder coated any colour(minimum thickness of powder coating 50 micron) for doors, windows, partician, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified anddirected by Engineer-in-Charge. |
| 11 | S&F aluminium powder coated (minimum thickness of powder coating 50 micron) as in window and ventilator shutters, sliding type three track, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruberpacking, anodised aluminum snap beading screws etc complete all as specified and as directed by Engr-In-Charge. |
| 12 | S&F for powder coated aluminium doors shutters,( thickness of powder coating not less than 50 micron) alumonium section weighing 0.55 kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing , handels 2 Nos in each door , hinges, anodised aluminium snap beading screws etc. complete all specified and directed by engr-In-Charge. |
| 13 | S&F 12mm thick particle board prelaminated on both sides as in panel of door shutters partition wall, work stations including beading etc complete all as specified and directed by Engr-in-Charge. |
| 14 | S&F brass body Mortice lock, vertical type,size 100 mm 4 lever, incl escutcheon plate and two No keys fixed complete all as specified and directed by Engr-in-Charge. |
| 15 | Supply and fix sheet glass 5.5 mm thick of selected quality (tinted glass) exc. 0.5 sqm each fixed to aluminium frame work with necessary rubberbeading complete all as specified and directed by Engineer in Charge,. |
| 16 | S&F in repair aluminiumdeco grills confirming to DG-104 grade all as specified and directed by Engr-In-Charge. |
| 17 | S & F in repair aluminium extruded section door closer hydraulically operated designation No-03, universal type, suitable for door shutters of 851 to 1000mm width and of weight of 61 to 80 Kg complete all as specified and directed by Engr In Charge. |
| 18 | S & F in repair 140mm long floor door stopper of Almn alloy body and tongue with hard drawn steel spring complete all as specified and directed by Engr In Charge. |
| 19 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.complete all as specified and directed by Engr In Charge. |
| 20 | M&L for Glazed ceramic coloured tiles in vertical surface 300X 450X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchinclback plaster 10 mm thick in cm 1:4 complete all as specified and directed by Engr In Charge. |
| 21 | M&Lfor Virified Ceramic light shade tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match flooring( in any pattern) andjointed with neat cement slurry over 15 mm thickcement screed in CM 1:6 and pointed with coloured cement matching with surfaces of tiles as in floor complete all as specified and as directed by Engr-In-Charge. |
| 22 | All as pr item No 21 above as above but as on vertical surface of wall such as skirting/dado including 10mm thick cement plaster (1:4) as in backing coat of tiles complete all as specified and as directed |
| 23 | Material and labour for false ceilings using GI snap grid system with roll-formed out of hot dip galvanised steel caping (powder coated) main runner 38 x 24 mm , cross Tee 29 x 24 mm and wall angle 24 x 24 mm members suspended with 4mm dia GI wire, carry maximum load up to 8.10 Kg/Sqm with 4mm thick designer ceiling board , pre paintedGypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions size 595 x 595mmx 4mm thick any texture (Lake and Hill, oceaniccascade or Electra) as approved by GE all as per , at any height including dismantling complete all as specified and as directed by Engr-In-Charge. |
| 24 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of asbastos cement (corrugated or semi corrugated) sheeting in roof covering as specified and directed by Engr-in-charge. |
| 25 | S&F steel/work in tubular truses,purlins, rafters, struts, vertical members and similar work including special shape washers complete using ERW or induction butt welded tubes conforming to IS-1161-1979, grade St-240, Mild Steel plates complete all as specified and directed by Engr-in-charge. |
| 26 | M&L for preparation of new steel surfaces of any description, not other wise described, over 10 cm width or girth and applying two coats synthetic enamel paint over a coats of red oxide primeras specified and directed by Engr-in-charge. |
| 27 | Taking down steel tubing or removing from siteof 15mm borepipe all as specified and directed by Engineer-in-charge. |
| 28 | All as above item No 27but 20mm bore. |
| 29 | S&F for 15mm bore steel water tubing medium grade , galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors complete all as specified and directed by Engineer-in-charge. |
| 30 | All as per item No 29 bove but 20mm bore |
| 31 | Dismantling water tanks exc 500 but not exc 1000 ltrs capasity and removing to store complete all as specified and directed by Engr In Charge. |
| 32 | S&F Rotational moulded polyethylene 1000 Ltr water storage tanks triple layer as per IS (cylindrical vertical with closed top) hoisted and fixed in position including necessary fittings complete all as specified and as directed by Engr-in-Charge. |
| 33 | S &F for 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe orr brass errule and fixed complete all as specified and directed by Engr In Charge. |
| 34 | Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by Engr In Charge. |
| 35 | S&F for 75 mm dia pvc pipe Stack clamps out of 50 mm by 5mm flat iron and 16mm dia round iron stays,enlcuding bolts and nuts and securing ends of stays to wall or roof as percomplete all as complete all as specified and directed by Engr In Charge. |
| 36 | S&F for 110 mm dia pvc pipe Stack clamps out of 50 mm by 5mm flat iron and 16mm dia round iron stays,enlcuding bolts and nuts and securing ends of stays to wall or roof as per complete all as specified and directed by Engr In Charge. |
| 37 | S&F for PVC SWR bends 110 mm complete all as specified and directed by Engr In Charge. |
| 38 | S&F PVC SWR bends 75 mm complete all as specified and directed by Engr In Charge. |
| 39 | S&F for PVC (SWR) pipes 110 mm single socketed, in any length with solvent cement joints fixed to walls/laid in floors complete all as specified and directed by Engr In Charge. |
| 40 | All as per item No 39 above. But 75 mm dia.. |
| 41 | S&F for PVC SWR Junction piece 75 mmprovided with access door equal or unequal complete all as specified and directed by Engr In Charge. |
| 42 | S&F for 110 mm PVC SWR Junction single (Single T) provided with access door complete all as specified and directed by Engr In Charge. |
| 43 | S&F in repairs Vitreous China wash basin white of size 630x450mm including all fitting like iron angle,CP pillar tab swan neck, pvc connection, CP waste coupling 32mm size half threaded with 130mm height complete all as specified and as directed by Engineer-in-Charge. |
| 44 | S&F 5.5mm thick fancy looking mirror of selected quality glass, mounted on wall with wooden plugs with chromium plated brass screw and SS cap washers, including including moulding of edges with smoothly complete all as specified and as directed by Engr-in-charge. |
| 45 | S & F in repairs 15mm CP bib tap fancy type copper alloy with crutch or butterfly handle , screwed down, screwed for iron pipe etccomplete all as specified and directed by Engr In Charge. |
| 46 | S & F in repairs CP Soap dish of Make-AQN-7731 of Jaquar MARC/GEM/PARKO Or Equivalent complete all as specified and as directed by Engineer-in-Charge. |
| 47 | S&F in repairs 15mm bore two way angle valve chromium plated with wall flange and fancy type high pressure screwed down with CP flange complete all as specified and as directed by Engineer-in-Charge. |
| 48 | S&F in repairs PTMT grating round of 100mm dia (Miniumum wt 50gms) complete all as specified and as directed by Engineer-in-Charge. |
| 49 | S&F in reapirs PTMT grating with waste hole (Minimium wt 100 gms) complete all as specified and as directed by Engineer-in-Charge. |
| 50 | S&F in repair stainless steel sink without drainage board made out of 1mm thick sheet for kitchen or laboratory with plug, washer, waste pipe etc including cast iron brackets, connecting union over all size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete all as specified and directed by Engr In Charge. |
| 51 | S & F for repair 15 mm bore brass CP sink mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engr In Charge. |
| 52 | S&F in repairs stainless plate rack of size 900mmx750mmx250mm depth size made out of 0.75mm thick sheet complete all as specified and directed by Engr In Charge. |
| 53 | Taking out of APP modified water proofing membrane including mud puska complete on roof surface and surface properly cleaned by wire brushcomplete all as specified and as directed by Engineer-in-Charge. |
| 54 | M&Lfor 15 mm thick screed bed or bedding layer of cement mortar 1:4 with liquid water proofing compound as pr manufacturer instructions complete all as specified and directed by Engineer-in-Charge. |
| 55 | M&L for preparation of plastered/concrete surfaces of roof and applying the under mentioned course of roof treatement complete all as specified and directed by Engineer-in-Charge.:-(a) Surface shall be throughly wire brushed, cleaned, washed, dried up properly and apply evenly a bituminuous primer coat conforming to IS @0.4 ltr /Sqm over concrete / plastered roof surface.(b) Applying evenly a tack coat of bitumen 85/25 grade @1.20 kg/ sqm.(c) Laying of 3mm thick APP membrane sheet (min weight 3 Kg/Sqm) consistingof a core of 160 gms/Sqm polyster non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method. APP membrane will normally be laid in length at right angle to the direction of slope. The over lap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves etc.(d) Membrane bonded completely to the substrate & the over laps are then scaled/fused by flame.Note:- This treatement shall be done by the approved authorized applicators and guarantee of treatement shall be minimum 10 years complete all as specified and directed by Engr In Charge. |
| 56 | M&L for PCC 1:2:4type B1 using 20mm graded aggregate mixed withwater proofing compound as per manufacturer instructions laid 40 mm avg thickness as in padding over roof slabs for providing proper slope to the concrete padding, surface finished even and smoothwithout using extra cement complete all as specified and directed by Engr In Charge. |
| 57 | M&L for preparation of plastered/concrete surfaces of roof and applying Painting with two coats of water proofing paint with aluminium finish complete all as specified and directed by Engineer-in-Charge. . |
| 58 | Demolition reinforced cement concrete of roofs,floors(otherthan ground floors), beams, staircases, landing, chajjas, RCC Jali and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and directed by Engineer-in-Charge. |
| 59 | M&L for RCC M-25(Nominal mix) using 20 mm graded aggregate as in slab, shelves, cover etc complete all as specified and directed by Engr-In-Charge. |
| 60 | M & L for formwork to chullah hoods, chajjas, slab, col, beam, trough and similar items including edges finished rough surfaces of concrete complete all as specified and directed by Engr-In-Charge. |
| 61 | S& F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire(annealed) not less than 0.9mm dia complete all as specified. |
| 62 | M & L for removing building materials etc.(other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of 1 km, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed by Engineer-in-Charge. |
| 63 | S&Fin repair Modular partition workstation with 45mm thick with per-laminated top of 25mm thick as per colour approved with metal powder coated legs, . Workstation having glass/fabric/white board prating on the top of the table, with three mobile pedestal, keyboard and CPU trolley. Overall size for per seat 1200x600x1200mm.(single seater) In each workstation. Including 02 Nos Power Socket(5/15 Amps) in each seat required for extension for PC/UPS connectivity with reqd wire complete as approved by GE. |
| 64 | S&Fin repair Modular partition workstation with 45mm thick with per-laminated top of 25mm thick as per colour approved with metal powder coated legs, . Workstation having glass/fabric/white board prating on the top of the table, with three mobile pedestal, keyboard and CPU trolley. Overall size for per seat 1200x600x1200mm.(double seaters) In each workstation.Including 02 Nos Power Socket(5/15 Amps) in each seat required for extension for PC/UPS connectivity with reqd wire complete as approved by GE. |
| 65 | S&Fin repair Modular partition workstation with 45mm thick with per-laminated top of 25mm thick as per color approved with metal powder coated legs, . Workstation having glass/fabric/white board prating on the top of the table, with three mobile pedestal, keyboard and CPU trolley. Overall size for per seat 1200x600x1200mm.(Four seaters) In each workstation.Including 02 Nos Power Socket(5/15 Amps) in each seatrequired for extension for PC/UPS connectivity with reqd wire complete as approved by GE. |
| 66 | S&Fin repair Modular partition workstation with 45mm thick with per-laminated top of 25mm thick as per color approved with metal powder coated legs, . Workstation having glass/fabric/white board prating on the top of the table, with three mobile pedestal, keyboard and CPU trolley. Overall size for per seat 1200x600x1200mm.(Six seaters) In each workstation. Including 02 Nos Power Socket(5/15 Amps) in each seatrequired for extension for PC/UPS connectivity with reqd wire complete as approved by GE. |
| 67 | M&L for preparation ofnewly plastered or unplastered surface and applying two coats of distemper oil emulsion on walls over a coat of primer incl 3mm thick wall care putty on walls complete all as specified and directed by Engr-In-Charge. |
