Tender For Supply And Installation Of 3 Seated Compacted Dual Desk At 5T Coleges, KUNDRA-Odisha

Tender For Supply And Installation Of 3 Seated Compacted Dual Desk At 5T Coleges 1. Dual Desk Frame Structure should be high quality cold rolled close annealed (CRCA) sheet and mild steel pipes and mild steel capsules. 2. Size 72 L*34w30Hight. 3. Frame should be made from 1.2mm thick ms sqare pipes, Ma round pipe and ms. capsule section pipe for better strength. Ms sheet must be 0.8 mm thickness. 4. Side panels are made of 1.25 mm CRCA Sheet width of 6 welded with 1.2 mm thick 25 mm OD round pipes for back support and seat support. 5. Front modesty/ panel made with 1.2mm thick. CR sheet and the book self must be made from the same CR sheet mater colour. e PVD CHROME Plated timicrobial powder coated colour of 6. The structure/ frame of oual minimum 60 microns with test certificate. 7. The structure joints must be welded and grinded properly for safety. 8. Four numbers heavy duty Nylon adjustable screw must be provided for floor protection and better balancing of dual desk. 9. Front modesty panel made of 1.25mm thick CR sheet with PVD coating/ chrome plating colour for better finishing. 10. All top edges HDMR tops must be finished with post forming/ 2mm PVC edge banding with rounded corner for safety of students. Dimension of Tops Desk top = 18mm HDMR board 70*16 Bench seat Book Self = 18 mm HD MR board 72*12 = 18 mm HDMR board 7010 Back rest = 18 mm HDMR board 708 installation of 3 seated compacted dual desk at 5T colleges 11. Dual Desk Frame Structure should be high quality cold rolled close annealed (CRCA) sheet and mild steel pipes and mild steel capsules, 12. Size 72 L*34w30Hight. 13. Frame should be made from 1.2mm thick mssqare pipes, Ma round pipe and mscapsule section pipe for better strength. Ms sheet must be 0.8 mm thickness. 14. Side panels are made of 1.25 mm CRCA Sheet width of 6 welded with 1.2 mm thick 25 mm OD round pipes for back support and seat support. 15. Front modesty/ panel made with 1.2mm thick CR sheet and the book self must be made from the same CR sheet material. Front panel/ modesty should be PVD/CHROME Plated colour. 16. The structure/ frame of dual desk must be antimicrobial powder coated colour of minimum 60 microns with test certificate. 17. The structure joints must be welded and grinded properly for safety. 18. Four numbers heavy duty Nylon adjustable screw must be provided for floor protection and better balancing of dual desk. 19. Front modesty panel made of 1.25mm thick CR sheet with PVD coating/ chrome plating colour for better finishing. 20. All top edges HDMR tops must be finished with post forming/ 2mm PVC edge banding with rounded corner for safety of students. Dimension of Tops Desk top = 18mm HDMR board 70 16 Bench seat = 18 mm HDMR board 72*12 Book Self = 18 mm HDMR board 7010 Back rest = 18 mm HDMR board 708

INR 6000 /-

INR 10000.0 /-

Refer document