Tender For Making Shed For Water Cooler And Ro System In Various Locations Including Academic Area At Iit Delhi., delhi-Delhi

Tender For Making Shed For Water Cooler And Ro System In Various Locations Including Academic Area At Iit Delhi. ; 1 Providing And Fixing Isi Marked Is : 1341 Oxidised M.S. Pressed Butt Hinges With Necessary Screws Etc. Complete. ( Copper Oxidized As Per Is: 1378 ) 2 100X58x1.90 Mm 3 Providing And Fixing Isi Marked Oxidised M.S. Sliding Door Bolts With Nuts And Screws Etc. Complete : ( Copper Oxidized As Per Is: 1378 ) 4 250X16 Mm 5 Providing And Fixing Isi Marked Oxidised M.S. Handles Conforming To Is:4992 With Necessary Screws Etc. Complete : ( Copper Oxidized As Per Is: 1378 ) 6 100 Mm 7 Steel Work In Built Up Tubular ( Round, Square Or Rectangular Hollow Tubes Etc. ) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. 8 Hot Finished Welded Type Tubes 9 Providing And Fixing Expandable Fastener Of Specified Size ( 12Mm Dia X 100Mm Long ) With Necessary Sleeve, Nuts & Bolts And L- Shape Clamp Bracket Of Size 50Mmx40mm Of 6Mm Thickness. 10 Providing And Fixing Precoated Galvanised Iron Profile Sheets ( Size, Shape And Pitchof Corrugationasapprovedbyengineer-In-Charge ) Of Totalcoated Thickness 0.50Mm ( Base Metal Of Minimum 0.45Mm Thickness With Total Coating Thickness Of 0.05Mm ) With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet Andpolyester Top Coat 15-18 Microns.Sheet Shouldhave Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In- Charge. The Sheet Shall Be Fixed Using Self Drilling / Self Tapping Screws Of Size ( 5.5X 55 Mm ) With Epdm Seal, Complete Upto Any Pitch In Horizontal / Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 11 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : 12 Two Or More Coats On New Work 13 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : 14 One Or More Coats On Old Work

Refer document

INR 36287.0 /-

INR 18.14 Lakhs /-