Tender For Construction Extension To Abi Incubation Facility 09Mt X 05Mt ( Sheet Roof Structure ) Under Abi Project At Icar-Iihr H’Ghatta. ; 1 Civil Works – I 2 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means Over Areas ( Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan ) Including Getting Out Anddisposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-Incharge. All Kinds Of Soil 3 For Wall Foundation 4 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:5:10 ( 1 Cement : 5 Coarse Sand ( Zone- Iii ) Derived From Natural Sources : 10 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources ) For Wall Foundation, Flooring And Plinth Protection, Column Footing Base 5 Random Rubble Masonry With Hard Stone In Foundation And Plinth Including Levelling Up With Cement Concrete 1:6:12 ( 1 Cement : 6 Coarse Sand : 12 Graded Stone Aggregate 20 Mm Nominal Size ) Upto Plinth Level With Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 6 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For 7 For Chajja 8 For Lintel 9 Plinth Beam 10 Drain Slab 11 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level And Above Plinth Level , Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More, 12 Lintel, Chajja 13 For Plinth Beam, Drain Slab 14 Providing And Constructing Concrete Block Masonry Using 150X200x400 Mm Solid Core Compact Concrete Block ( Grade C - 50Kg / Cm2 ) In Cm 1:6 Including All Scaffolding, Curing, Etc. Complete 15 For Walls 16 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level 1:2:4 ( 1 Cement : 2 Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 4 Graded Stone Aggregate 20 Mmnominal Size De Rived From Natural Sources ) For Plinth Beam 17 Reinforced Cement Concrete Work In Lintel Beams, Chajja Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 ( 1 Cement :1.5 Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources ) 18 For Lintel And Chajja , All Round Beam At Roof Level 19 Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories 0.50 Mm + 0.05 % Total Coated Thickness, Zinc Coating 120Gsm As Per Is: 277 In 240 Mpa Steel Grade, 5-7 Micronsepoxy Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling / Self Tapping Screws Complete Tiled Shaped As Per Approved Sample 20 For Roof, Ridge 21 Providing Cement Plaster 1:3 ( 1 Cement: 3 Coarse Sand ) Finished With A Floating Coat Of Neat Cement. 12 Mm Cement Plaster 22 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. ( Asian Tractor / Jonson Nicholson / Berger ) 23 Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface Water Thinnable Cement Primer 24 Wall Painting With Acrylic Emulsion Paint, Having Voc ( Volatile Organic Compound ) Content Less Than 50 Grams / Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour. Two Coats ( Asian Tractor / Jonson Nicholson / Berger ) 25 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade New Work ( Two Or More Coat Applied @ 1.67 Ltr / 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg / 10 Sqm ) ( Asian Tractor / Jonson Nicholson / Berger ) 26 Steel Work In Built Up Tubular ( Round, Square Or Rectangular Hollow Tubes Etc. ) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Etc. Complete. Angles And 10 Mm Solid Rod For Window Grill , Roof Truss 27 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade Two Or More Coats On New Work Over An Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture . ( Asian Tractor / Jonson Nicholson / Berger ) 28 Providing And Fixing Pressed Steel Door Frames Conforming To Is: 4351, Manufactured From Commercial Mild Steel Sheet Of 1.60 Mm Thickness, Including Hinges, Jamb, Lock Jamb, Bead And If Required Angle Threshold Of Mild Steel Angle Of Section 50X25 Mm, Or Base Ties Of 1.60 Mm, Pressed Mild Steel Welded Or Rigidly Fixed Together By Mechanical Means, Including M.S. Pressed Butt Hinges 2.5 Mm Thick With Mortar Guards, Lock Strike-Plate And Shock Absorbers As Specified And Applying A Coat Of Approved Steel Primer After Pre-Treatment Of The Surface As Directed By Engineerin- Charge Fixing With Adjustable Lugs With Split End Tail To Each Jamb 29 Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is2202 ( Part I ) Non-Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Ofshutters30 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws 30 Providing And Fixing Bright Finished Brass Hanging Type Floor Door Stopper With Necessary Screws, Etc. Complete 31 Providing And Fixing Bright Finished Brass Tower Bolts ( Barrel Type ) With Necessary Screws Etc. Complete 150X10 Mm 32 Providing And Fixing Bright Finished Brass Door Latch With Necessary Screws Etc. Complete250x16x5 Mm 33 Providing And Fixing Aluminium Handles, Isi Marked, Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete125 Mm 34 Providing And Fixing Top Self Driven Rotating Exhaust Fans 2 Feet Sizes With Necessary And Providing Additional Support To Hold The Fans At Required Said Position Complete As Required At Site And Directed By The Engineer At Site And As Per Approved Sample Of The Fan 35 Banking Excavated Earth In Layers Not Exceeding 20 Cm In Depth, Breaking Clods, Watering, Rolling Each Layer With ½ Tonne Roller, Or Wooden Or Steel Rammers, And Rolling Every 3Rd And Top-Most Layer With Power Roller Of Minimum 8 Tonnes And Dressing Up, In Embankments For Roads, Flood Banks, Marginal Banks, And Guide Banks Etc., Lead Upto 50 M And Lift Upto 1.5 M All Kinds Of Soil 36 Filling Available Excavated Earth ( Excluding Rock ) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 M And Lift Upto 1.5 M. 37 Providing And Laying Vitrified Floor Tiles In Different Sizes ( Thickness To Be Specified By The Manufacturer ) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Jointing With Grey Cement Slurry @ 3.3 Kg / Sqm Including Grouting The Joints With White Cementand Matching Pigments Etc., Complete Size Of Tile 600X600 Mm 38 Providing And Fixing Aluminium Work For Doors, Windows And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing, Paneling And Dash Fasteners To Be Paid For Separately ) Powder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) 39 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required ( Fittings Shall Be Paid For Separately ) Powder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) 40 Providing And Fixing Glazing In Aluminium Door, Window, Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item ) : With Float Glass Panes Of 4.0 Mm Thickness ( Weight Not Less Than 10Kg / Sqm ) Plain Glass 41 Supplying And Fixing With Close Nit Ss Mesh As Per Approved Sample For Aluminium Shutters 42 Providing And Fixing Tiled False Ceiling Of Specified Materials Of Size 595X595 Mm In True Horizontal Level, Suspended On Inter Locking Metal Grid Of Hot Dipped Galvanized Steel Sections ( Galvanized @ 120 Grams / Sqm, Both Side Inclusive ) Consisting Of Main T Runner With Suitably Spaced Joints To Get Required Length And Of Size 24X38 Mm Made From 0.30 Mm Thick ( Minimum ) Sheet, Spaced At 1200 Mm Center To Center And Cross T Of Size 24X25 Mm Made Of 0.30 Mm Thick ( Minimum ) Sheet, 1200 Mm Long Spaced Between Main T At 600 Mm Center To Center To Form A Grid Of 1200X600 Mm And Secondary Cross T Of Length 600 Mm And Size 24X25 Mm Made Of 0.30 Mm Thick ( Minimum ) Sheet To Be Interlocked At Middle Of The 1200X600 Mm Panelto Form Grids Of 600X600 Mm And Wall Angle Of Size 24X24x0.3 Mm And Laying False Ceiling Tiles Of Approved Texture In The Grid Including, Required Cutting / Making, Opening For Services Like Diffusers, Grills, Light Fittings, Fixtures, Smoke Detectors Etc. Main T Runners To Be Suspended From Ceiling Using Gi Slotted Cleats Of Size 27 X 37 X 25 X1.6 Mm Fixed To Ceiling With 12.5 Mm Dia And 50 Mm Long Dash Fasteners, 4 Mm Gi Adjustable Rods With Galvanised Butterfly Level Clips Of Size 85 X 30 X 0.8 Mm Spaced At 1200 Mm Center To Center Along Main T, Bottom Exposed Width Of 24 Mm Of All T-Sections Shall Be Pre-Painted With Polyester Paint, All Complete For Allheights As Per Specifications, Drawings And As Directed By Engineer-In-Charge. 12.5 Mm Thick Square Edge Pvc Laminated Gypsum Tile Of Size 595X595 Mm, Made Of Gypsum Plasterboard, Manufactured From Natural Gypsum As Per Is 2095 Part I And Laminated With White 0.16Mm Thick Fire Retardant Pvc Film On The Face Side And 12Micron Metalizedpolyester On The Back Side With All Edges Sealed With Sub Head : 12.0 Roofing 266 Codedescription Unit Rate No. The Face Side Pvc Film Which Goes Around And Wraps The Edges And 43 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing, Paneling And Dash Fasteners To Be Paid For Separately ) Powder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) 44 Providing And Fixing 09 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Perarchitectural Drawings And Directions Of Engineer- In-Chargepre-Laminated Particle Board With Decorative Lamination On One Side And Balancing Lamination Onother Side 45 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item ) : With Float Glass Panes Of 4.0 Mm Thickness ( Weight Not Less Than 10Kg / Sqm ) 46 Electrical Work -- Ii 47 Wiring For Light Point / Fan Point / Exhaust Fan Point / Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthling The Point With 1.5 Sq.Mm Frls Pvc Insulatedcopper Conductor Single Core Cable Etc. As Required. Stepped Type Modular Fan Regulator ( 2 Module ) 48 Stepped Type Modular Fan Regulator ( 2 Module ) 49 Wiring For Light / Power Plug With 2X4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit Alongwith 1 No. 4 Sq. Mm 50 Frls Pvc Insulated Copper Conductor Single Core Cable For Loopearthing As Required. 51 S.P. 5 / 6 Amps, One Way Modular Switch, Isi Marked. 52 S.P. 15 / 16 Amps, One Way Modular Switch, Isi Marked. 53 3 Pin 5 / 6 Amps Modular Socket Outlet, Isi Marked. 54 6 Pin 15 / 16 Amps Modular Socket Outlet, Isi Marked. 55 Modular Base & Cover Plate For 6 Module 56 Wiring For Light / Power Plug With 4X4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Steel Conduit Along With 2 Nos. 4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable For Loop Earthing As Required. 57 Supplying And Fixing 30 A, 415 V, Tpn Industrial Type Socket Outlet, With 4 Pole And Earth, Metal Enclosed Plug Top Along With 30 A C Curve, Tpnmcb, In Sheet Steel Enclosure, On Surface Or In Recess, With Chained Metal Cover For The Socket Out Let And Complete With Connections, Testing And Commissioning Etc. As Required. ( 5 Way ) 58 Supplying And Fixing Of 20-36 W Led 2”X 2” Led Light Fittings ( Concealed ) As Required At Site. 59 Supplying And Fixing Of Ceiling Fan As Required At Site. 60 Supplying And Fixing Of 250 Mm Size Exhaust Fan As Required At Site. 61 Supplying And Fixing Of 200 Amps Open Type 4 Way Copper Bus Bar Box Of Size 18” X 18” With Cable Termination By Using Copper Lugs. 62 Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface / Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. ( But Without Mcb / Rccb / Isolator ) 12 Way , Single Door / Double Door. 63 Supplying And Fixing 5 A To 32 A Rating, 240 / 415 V, 10 Ka, CCurve, Miniature Circuit Breaker Suitable For Inductive Load Offollowing Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 64 10 A Single Pole 65 20 A Single Pole 66 32 A Tp&N 67 Supplying And Fixing Of 40 W Led Street Light Fittings Outdoor Type As Required At Site. Control Switch For The Streetlights Has To Be Provided Out Side The Building. 68 Supplying And Fixing Following Rating, Four Pole, 415 V, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 63 A 69 Earthing With Copper Earth Plate 600 Mm X 600 Mm X 3 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc. With Charcoal / Coke And Salt As Required. 70 Providing And Laying Earth Connection From Earth Electrode With 6 Swg Dia G.I. Wire In 15 Mm Dia G.I. Pipe From Earth Electrode Including Connection With G.I. Thimble Excavation And Re-Filling As Required. 71 Supplying And Laying Of Fallowing Sizes Of Pvc Insulated Aluminum Conductor Wired Armored Ug Cable In Dwc Pipe Double Walled Corrugated High Density Poly Ethylene Pipe Having Corrugation On The Outer Wall 50 Mm And Plain Surface Inner Wall Of 55 Mm Sizes Conforming To Is14930, With Necessary Dwc Fitting For Protection Of 1.1 Kv Grade Ug Cable Directly In Ground At A Depth Of 2 Feet Including Excavation And Refilling The Trench ( Including Earthing And End Termination ) Etc. As Required At The Site. ( V Guard / Havel’S / Poly Cab / Ashirvad With Isi ) . 50 Sq Mm X 3.5 Core.
