Tender For Work For Maintenance Of Non-Residential Building At 400Kv S / Stn. Bbmb Panipat.; 1 Dismantling Concrete. ( D ) Cement Concrete Plain1:2:4 Mix. 2 Centering And Shuttering For Flat Surfaces Such As Suspended Floors, Roofs, Landings, Chajjas, Shelves Etc. 3 Cement Concrete 1:2:4 ( A ) With Stone Ballast Or Shingle ( I ) Mixing By Manual Means 4 Cutting Chase In Brick Walls In Cement Or In Floor For Embedding G.I. Or C.I Pipes Line And Making Good The Same To Its Original Condition. Size 75 Mm X 75 Mm 5 Cold Twisted Deformed ( Ribbed / Tor Steel ) Bars ( Fe 415 Grade As Per Is 1786-2008 ) , For R.C.C Works, Where Not Including In The Complete Rate Of Rcc Including Binding & Bending And Placing In Position Complete. 6 20Mm Thick Cement Plaster 1:5 In Two Coat Work. 7 Dismantling Cement Conglomerate Floors 25Mm To 50Mm Thick Without Concrete Base 8 Scraping ( C ) Cement Plaster 9 Dismantling Of Floor Tiles At Any Floor Of The Building, Laid In Cement Mortar Including Dismantling Of Cement Concrete Base And Disposal Of Malba At A Suitable Place Within A Distance Of 100 Mtrs Of The Complex Complete In All Respect. 10 Dismantling Of Wall Tiles At Any Floor Of The Building, Laid In Cement Mortar Including Scraping Of Cement Plaster And Disposal Of Malba At A Suitable Place Within A Distance Of 100 Mtrs Of The Complex Complete In All Respect. 11 Providing And Laying Vitrified Floor Tiles In Different Sizes In Light Colour Shades Made Using Soluble Salt Technology ( Thickness To Be Specified By The Manufacturer ) With Water Absorption’S Less Than 0.08% And Conforming To Is : 15622 Of Approved Make In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 ( 1 Cement: 4 Fine Sand ) , Complete. ( Soluble Salt Print Penetration Should Be Up To 1 To 2 Mm After The Tiles Are Fired & Polished ) . ( A ) 600X600 Mm 12 Providing And Laying Anti Skid Ceramic Floor Tiles Of Size 300X300 Mm X 10 Mm Thick Of 1St Quality Conforming To Is : 15622 Of Approved Make In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On Flooring Skirting And Dado In 12.5Mm Thick Cement Plaster 1:3 In Base And Jointed With @ 3.3 Kg / Sqm Including Pointing The Joints With White Cement And Matching Pigment Etc., Completewhite Cement Slurry In Joints Including Corners Angles And Beading. 13 Providing And Fixing 1St Quality Ceramic Glazed Wall Tiles Matt / Semi Matt / Glosy / Highly Gloss Finish / Highlighter / Emboss Conforming To Is : 15622 ( Thickness To Be Specified By The Manufacture Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Size 600 X 300 Mm As Approved By Engineer-Incharge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:4 ( 1 Cement: 4 Fine Sand ) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 14 Dismantling Sanitary Fixtures Such As Eurpoean / Indian / Orissa W.C., Pvc / China Ware Cistern, Wash Hand Basin, Urinal Pot, Sinks And Cp Fittings And Disposal Of Dismantled Material Within A Distance Of 100 Mtr. Complete In All Respect As Required By Engineer-In-Charge. ( A ) Eurpoean / Indian / Orissa W.C. 15 Providing And Fixing In Position Chinaware European Type Water Closet P Trap Or S Trap Of Approved Make ( To The Approval Of The Engineer-In-Charge ) Consisting Of 10 Ltr. Pvc Flushing Cistern Isi Marked, Pvc Short Bend 32 Mm Dia Including Cost Of Seat Cover Complete In All Respect And To The Entire Satisfaction Of Engineer-In-Charge. Make:- Hindware, Perryware, Cera. 16 Providing And Fixing Jet Spray With 2-6 Long Pvc Pipe. ( A ) With C.P. Brass Nut. 17 Providing & Fixing In Postion 15 Mm I / D Bib Cock Of Approved Make ( To The Approval Of Engineer-In-Charge ) Complete In All Respect. Brass Nozel Bib Cock 15Mm X 250Gm.Make:- Hindware, Perryware, Cera. 18 Providing And Fixing In Position Premium Range C.P. Brass Fittings And Accessories Of Approved Make ( To The Approval Of Engineer-In-Charge ) Complete In All Respect. C.P. Brass Accessories:- C.P. Brass Soap Dish Holder With Glass Dish.Make:- Hindware, Perryware, Cera. 19 Providing & Fixing In Position 5Mm Thick Beveled Edge Mirror Of Superior Glass ( Of Approved Make ) Complete With 4Mm Thick Hard Board Backing Fixed In With Rawl Plugs 50Mm, C.P. Brass Screws And Washers And S / S Studs On Top Complete In All Respect ( As Required By The Engineer-In- Charge ) ( A ) Size600mmx450mm 20 Providing And Fixing In Position Premium Range C.P. Brass Fittings And Accessories Of Approved Make ( To The Approval Of Engineer-In-Charge ) Complete In All Respect. C.P. Brass Accessories:- C.P. Brass Towel Rail 600 Mm Longmake:- Hindware, Perryware, Cera. 21 Removing Doors And Windows ( Steel Or Wood ) With Chowkhats By Making Recesses In Walls When The Wall Is Not To Be Dismantled. 22 ( A ) Doors Of Area 3 Sqm And Below. 23 ( B ) Windows Of Area 3 Sqm And Below 24 ( C ) Clerestory Windows Of Area 3 Sqm And Below. 25 Providing And Fixing Aluminum Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Conforming To Is: 733 And Is : 1285 Of Jindal, Hindalco, Mahavir Or Equivalent Make Approved By Engineer In Charge , Fixed With Rawl Plugs And Screws Or With Fixing Clips, Or With Expansion Hold Fasteners Including Necessary Filling Up Of Gaps At Junctions, At Top, Bottom And Sides With Required Pvc Plug / Neoprene Felt Etc. Aluminum Sections Shall Be Smooth, Rust Free, Straight, Mitered And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminum Snap Beading For Glazing / Paneling, C.P.Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-Incharge. ( Glazing And Paneling To Be Paid For Separately ) :- For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Labour For Fixing Of Fittings Wherever Required Including The Cost Of Pvc Plug / Neoprene Gasket Required. 26 ( A ) For Fixed Portion And Chawkhats 27 ( B ) For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Labour For Fixing Of Fittings Wherever Required Including The Cost Of Pvc Plug / Neoprene Gasket Required 28 Providing And Fixing Glazing In Aluminum Door, Window, Ventilator Shutters And Partitions Etc. With Pvc Plug / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . ( Cost Of Aluminum Snap Beading Shall Be Paid In Basic Item ) . ( I ) Float Glass Panes Of 5 Mm Thickness 29 Providing And Fixing Aluminum Wire Mesh Including Cost Of Necessary Fittings I.E. Screws, U Type Beading Etc. Complete. 30 Providing And Fixing Aluminum Grill 6.3 Mm Including Cost Of Necessary Fittings I.E. Screws With Clip Ruber Etc. Complete 31 Providing & Fixing 100Mm With Plate 150Mm X 32 Mm Anodized Aluminum Mat Finish Handles Isi Marked On Door & Window Frames Complete In All Respect As Per The Directions Of Engineer-In-Charge. 32 Providing & Fixing 100 X 10 Mm Anodized Aluminum Mat Finish Tower Bolts Isi Marked On Door & Window Frames Complete In All Respect As Per The Directions Of Engineer-In-Charge. 33 Supplying Pressed Steel Sheet Frames ( Chowkhat ) Consisting Of 18Gauge ( 1.25 Mm Thick Steel Sheet Of The Specified Section, Including Iron Lugs ( Hold Fast ) Iron Hinges Conforming To Pwd Specification Including Bolts For Fixing Stops Lock Notch Provision For Receiving Tower Bolts And Finished With 1 Primer Coat Approved Quality, Fixed In Position Excluding The Cost Of Cement Concrete 1:3:6 For Fillings In The Frame And Cement Concrete 1:2:4 For Lugs Complete. ( C ) Doors And Windows Frame Of Size 151Mm X 60Mm With 35 Mm Wide Double Rebate Weighing 3.95 Kg Per Meter. 34 Factory Manufactured Solid Flush Door Fixed In Position Iron Hinges, Etc ( Excluding The Cost Of Any Fittings Other Than Specified Above But Including Labour For Fixing The Same In Position ( Is 2202-1 ( 1999 ) - ( Iv ) 35Mm Thick 35 Providing & Fixing 6 Stainless Steel Handles Isi Marked On Door & Window Frames Complete In All Respect As Per The Directions Of Engineer-In-Charge 36 Providing & Fixing 150 X 10 Mm Anodized Aluminum Mat Finish Tower Bolts Isi Marked On Door & Window Frames Complete In All Respect As Per The Directions Of Engineer-In-Charge. 37 Providing And Fixing Aluminum Sliding Door Bolts Isi Marked Anodized ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade With Nuts And Screws Etc. Complete :- ( B ) 250Mm X 16Mm 38 Dismantling Roofing:- Jack Arch Roofing Excluding Joists Or Terraced Roofing. 39 Providing And Fixing ( Ppgl ) Precoated Painted Galvalume Sheet Roofing ( Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge ) The End Rib Shall Have Anti Cappillary Groove And Return Leg. The Steel Sheet Must Be Having Yield Strength Of 550 Mpa ( Fy= 550 Mpa ) Metallic Coated With Zinc- Aluminium Alloy ( I.E. 55% Al, 43.4%Zinc, 1.6% Si-Zincalume ) Az150 ( Min. 150 Bm / Mm2 Total On Both Sides ) , Pre Painted With Super Durable Polyster Xrw Quality Paint Includes Inorganic Infrared Reflective Pigment. The Sheet Confirms To General Requirement Of As / Nzs 2728 Type 4 / Is 15965 Class 3 Durability And Gloss Value Of 25% -40%. Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In Charge. The Sheet Shall Be Fixed Using Self Drilling / Self Tapping Screws Of Size ( 5.5X 55 Mm ) With Epdm Seal, Complete Upto Any Pitch In Horizontal / Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 0.60 Mm ( + 0.05 % ) Thick 40 Dismantling Barbed Wire Or Flexible Wire Rope In Fencing Including Making Rolls And Stacking Within 50 Metres Lead. 41 Providing & Fixing Of 10 Gauge Welded Mesh Of 25Mm X 25Mm Size Fixed On Steel Glazing With Ms Flat 20Mm X 6Mm Beeding Complete In All Respect Including Painting Two Coats With Synthetic Enamel Paint And Priming Coat. 42 Steel Work Fixed Independently Without Connection Plates Including Cutting Hoisting And Fixing In Position ( C ) Tees Angles & Channels ( Angle Size 25X25x5mm ) 43 Providing And Fixing 14 Gauge Ms Sheet Garage Doors With 40Mmx40mmx6mm Angle Iron Frame With Diagonal Braces 3.15Mm Gusset Plates Including Locking Arrangement With Handles Etc. Complete In Respects 44 P / F Concertina Coil Fencing With Punched Tape Concertina Coil 600 Mm Dia 10 Mtrs. Openable Length ( Total Length 90 Mtrs. ) Having 50 Nos. Rounds Per 6 Mtrs. Length Upto 3 Mtrs. Hight Of Wall With Existing Angle Iron ‘’Y’’ Shaped Placed 2.4 M Or 3.0 M, Apart G.I.Step Less And G.I. Clips To Retain Horizontal, Including Bolts Are G.I. Barded Wire Tied To Angle Iron, All Complete As Per Direction Of Engineer-In-Charge, With Reenforced Barbed Wire Tape ( Rbt ) , Spring Core ( 2.5Mm Thick ) And Wt. 43.478 Gm / Mtrs. ( Cost Of Ms Angle, Cc Blocks Shall Be Paid Separately ) 45 Applying Pink Primer Or Aluminum Priming Coat On Wood Work Including Preparation Of Surface Knotting And Stopping Etc. 46 Painting Two Or More Coats Excluding Priming Coat With Synthetic Enamel Paint In All Shades On Wood Work, Metallic Or Plastered, Concrete Surface To Give An Even Shade.Make :- Burger, Asian, Nerolac
