Tender For Repairing / Renovation ( Civil Works ) Of C0- Office At Semna Colony, Kishtwar; 1 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed: All Kind Of Soil: 1 M From Cutting Edge 2 Surface Dressing Of The Ground Including Removing Vegetation And In-Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead Upto 50 M And Lift Upto 1.5 M In -All Kinds Of Soil. 3 Demolishing Cement Concrete Manually / By Mechanical Means Including Disposal Of Material Within 50 Meters Lead As Per Direction Of Engineer-Incharge:1:3:6 Or Richer Mix ( I / C Equivalent Design Mix ) 4 Cement Concrete ( Cast-In-Situ ) Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With:1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 5 Kota Stone Flooringkota Stone Slab Flooring 25 Mm Thick Over 20Mm ( Average ) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab, Including Rubbing, Polishing And Curing Complete With Base Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) 6 Pointing On Stone Workpointing On Stone Work With Cement Mortar 1 : 3 ( 1 Cement : 3 Fine Sand ) :Flush / Ruled Pointing 7 Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4Mm Thick Float Glass Panes Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws:Second Class Kail Wood, 35Mm Thickness 8 Providing And Fixing Wire Gauze Shutters Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Direction Of Engineer-In-Charge : Second Class Kail Wood: 35Mm 9 Providing Wood Work In Frames Of False Ceiling, Partitions Etc. Sawn And Fixed In Position: Budloo / Fir Wood. 10 Providing And Fixing Plain Lining With Necessary Screws / Nuts & Bolts / Nails, Including A Coat Of Approved Primer On One Face, And Fixed On Wooden / Steel Frame Work, Complete As Per Direction Of Engineer-In-Charge ( Frame Work Shall Be Paid For Separately ) : 12Mm Thick Commercial Ply Conforming To S : 1328 Bwr Type 11 Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is: 2202 ( Part I ) Non-Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters:With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws ( 35Mm ) 12 Providing And Fixing Wooden Moulded Corner Beading Of Size 50X50 Mm ( Base And Height ) Of Triangular Shape To The Junction Of Paneling Etc. With Iron Screws, Plugs And Priming Coat On Unexposed Surface Etc. Complete :Second Class Kail Wood 13 Providing And Laying Vitrified Floor Tiles In Different Sizes ( Thickness To Be Specified By The Manufacturer ) With Water Absorption Less Than 0.08% And Conforming To Is:15622 Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 ( 1Cement :4 Coarse Sand ) Including Grouting The Joints With White Cement And Matching Pigments Etc. Complete: Size Of Tile 600X600 Mm 14 Providing And Laying Ceramic Glazed Floor Tiles 300X300 Mm ( Thickness To Be Specified By The Manufacturers ) Of 1St Quality Conforming To Is:15622 Of Approved Make, Laid On 20 Mm Thick Bed Of Cement Mortar 1: 4 ( 1 Cement : 4 Coarse Sand ) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete.In Colour Such As White, Ivory, Grey, Fume Red Brown 15 Repairs To Plaster Of Thickness 12Mm To 20 Mm In Patches Of Area 2.5 Sq. Meters And Under, Including Cutting The Patch In Proper Shape Raking Out Joints And Preparing And Plastering The Surface Of The Walls Complete Including Disposal Of Rubbish To The Dumping Ground Within 50 Meters Lead:With Cement Mortar 1:4 ( 1 Cement : 4 Fine Sand ) 16 Structural Steel Work In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete.: Welded 17 Providing And Fixing Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations, Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels: Granite Of Any Colour Or Shade: ( Area Of Slab Over 0.5 Sqm ) : 16Mm 18 Providing Corrugated G. S. Sheet Roofing Including Vertical / Curved Surfacefixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8Mm Diameter With Bitumen And G.I Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Upto Any Pitch In Horizontal / Vertical Or Curved Surface ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required:0.63 Mm Thick With Zinc Coating Not Less Than 275 Gram / M2 19 Providing And Applying White Cement Based Putty Of Specified Thickness, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete: 1 Mm Thick 20 Applying Priming Coat: With Ready Mixed Aluminium Primer Of Approved Brand And Manufacture On Resinous Wood And Ply Wood 21 Distempering With 1St Quality Acrylic / Oil Bound Washable Distemper ( Ready-Made ) Having Voc Content Less Than 50 Grams / Litre Of Approved Manufacturer And Of Required Shade And Colour Complete As Per Manufacturers’ Specifications, One Or More Coats On Old Work 22 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade: Two Or More Coats On New Work 23 Painting On G.S. Sheet With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade On Old Work ( One Or More Coats ) 24 Painting On G.S Sheets With Synthetic Enamel Paint Of Approved Band And Manufacture Of Required Colour To Give An Even Shade On New Work ( Two Or More Coats ) Including A Coat Of Approved Steel Primer But Excluding A Coat Of Mordant Solution. 25 Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Meters Lead As Per Direction Of Engineer-In-Charge: In Cement Mortar 26 Providing And Fixing Aluminum Tower Bolts Isi Marked Anodized ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade With Necessary Screws Etc. Complete :100X10 Mm 27 Providing And Fixing Aluminum Tower Bolts Isi Marked Anodized ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade With Necessary Screws Etc. Complete :150X10 Mm 28 Providing And Fixing Aluminium Handles Isi Marked Anodized ( Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868 ) Transparent Or Dyed To Required Colour And Shade With Necessary Screws Etc. Complete:100Mm 29 Providing And Fixing Bright Finished Brass Hard Drawn Hooks And Eyes:150Mm 30 Providing And Fixing Isi Marked Oxidized M.S. Sliding Door Bolts With Nuts And Screws Etc. Complete :250X16 Mm 31 Providing And Fixing Aluminum Extruded Section Body Tubular Type Universal Hydraulic Door Closer, ( Having Brand Logo With Is: 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm ) , With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete : 32 Providing And Fixing Isi: 12817 Marked Stainless Steel Butt Hinges With Stainless Steel Screws Etc..: Complete.75X47x1.80 Mm 33 Providing And Placing On Terrace ( At All Floor Levels ) Polyethylene Water Storage Tank Isi : 12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank 34 Providing And Fixing Brass Bib Cock Of Approved Quality:15 Mm Nominal Bore 35 Providing And Fixing 600X120x5mm Glass Shelf With Edges Round Off Supported On Anodized Aluminium Angle Frame With C.P. Brass Brackets And Guard Rail Complete Fixed With 40 Mm Long Screws, Rawl Plugs, Etc. Complete 36 Providing And Fixing In Position Precast R.C.C. Manhole Cover And Frame Of Required Shape And Approved Quality: Ld - 2.5: Rectangular Shape 600X450 Internal Dimensions 37 Dismantling W.C. Pan Of All Sizes Including Disposal Of Dismantled Materials I / C Malba All Complete As Per Directions Of Engineer-In-Charge 38 Providing And Fixing Water Closet Squatting Pan ( Indian Type W.C. Pan ) With 100 Mm Sand Cast Iron P Or S Trap, 10 Liter Low Level White P.V.C. Flushing Cistern, Including Flush Pipe ( Of Approved Make ) With Manually Controlled Device ( Handle Lever ) Conforming To Is: 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With Integral Type Foot Rests. 39 Providing And Fixing 100 Mm Sand Cast Iron Grating For Gully Trap. 40 Providing And Fixing Soil, Waste And Vent Pipes :75 Mm Diameter: Sand Cast Iron S And S Pipe As Per Is:1729 41 Dismantling Of Flushing Cistern Of All Types ( C.I / Pvc / Vitreous China ) Including Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials Within 50 Meters Lead 42 Providing And Fixing Stainless Steel A Isi 304 ( 18 / 8 ) Kitchen Sink As Per I.S. 13983 With C.I. Brackets And Stainless Steel Plug 40 Mm, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required :Kitchen Sink Without Drain Board:610X460mm Bowl Depth 200Mm 43 Providing And Fixing Ptmt Waste Coupling For Wash Basin And Sink, Of Approved Quality And Colour: Waste Coupling 38Mm Of 83 Mm Length And 77 Mm Breadth Weighing Not Less Than 60Gms. 44 Providing And Fixing Ptmt Bottle Trap For Wash Basin And Sink: Bottle Trap 31 Mm Single Piece Moulded With Height Of 270 Mm, Effective Length Of Tail Pipe 260 Mm From The Centre Of The Waste Coupling 77 Mm Breadth With 25 Mm Minimum Water Seal, Weighing Not Less Than 260 Gms. 45 Cpvc Pipes And Fittingsproviding And Fixing Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes, Having Thermal Stability For Hot And Cold Water Supply, Including All Cpvc Plain And Brass Threaded Fittings. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge: 46 Coupler: 75 Mm 47 Single Tee With Door: 110X110x110 Mm 48 Providing And Fixing 15 Mm Nominal Bore C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Make Conforming To Is : 8931 49 Providing And Fixing 15 Mm Nominal Bore Of Standard Back Type C.P. Brass Close Hole Basin Mixer Pillar Tap Of Approved Quality And Make, Weighing Not Less Than 1.970 Kg. 50 Providing And Laying 60Mm Thick Factory Made Cement Concrete Interlocking Paver Block Of M-30 Grade Made By Block Making Machine With Strong Vibratory Compaction And Of Approved Size And Design / Shape Laid In Required Colour And Pattern Over And Including 50Mm Thick Compacted Bed Of Fine Sand, Filling The Joints With Coarse Sand Etc. All Complete As Per Direction Of Engineer-In-Charge.
