|
| 1 | M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and as directed. |
| 2 | M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and as directed. |
| 3 | M&L for galvanized steel water tubing medium grade of 25mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floorsincluding taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and as directed. |
| 4 | Dismantling of asbestos cement sheet (corrugated or semi corrugatedetc) in roof covering complete all as specified and as directed. |
| 5 | M & L for 6 mm thick non asbestos cement, corrugated or semi corrugated sheets fixed with L-type or J- type or cranked hook bolts in roofs, walls etc complete all as specified and as directed. |
| 6 | M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and as directed. |
| 7 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 8 | Supply and fixing steel stanchion built up one beam tubular pole or channel section with flange plates caps bases vsplices brackets cleat and other connection Fe-290 (Grade E-165) complete all specified and directed. |
| 9 | Material and labour for MS steel work as in tubular section as in purlin and rafter complete using ERW confirming to IS 1161-1979 grade strength 240 including cutting, grinding, welding etc as required. |
| 10 | Demolition of brick or stone/boulder masonry built in cement mortar or cement lime mortar complete all as specified and as directed. |
| 11 | M & L for brick work with sub class \"B\" burnt bricks straight or curved on plan exc 6m mean radius, built in CM 1:6built in cement mortar or cement lime mortar complete all as specified and as directed. |
| 12 | Taking down cementor cement lime plaster on brick or stone walls etc. including raking out joints, hacking forkey, scrubbing down with water, etc complete all as specified and as directed. |
| 13 | M & L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement complete all as specified and as directed. |
| 14 | M & L for rendering 15 mm thick in CM 1:4 with water proofing compund (@ 3% by weight of cement) on fair faces of brick work or concrete surface finishing the surface even and fair complete all as specified and as directed. (Note:- Water proofing compound shall be measured and paid seprately.) |
| 15 | Supply only integral water proofing compound conforming to IS 2645 complete all as specified and as directed. |
| 16 | S & F in repair Gypsum Board 600 x 600mm and 12mm thick (textured finish), white prelaminated sett embossed reinforced designer ceiling boards tiles of approved texture at all height laid on hotbe structural soffits by approved hangers at 1200mm center. hangers of GI wire 4mm dia to be fixed by approved rawl plug, screw etc. The last hanger at the end if each main runner shall not be greater than 450mm from adjacent wall, flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runner at 600mm center to form 600x 600 modules cross tee longer than 600mm to be supported independently. 600x600 dodules formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee perimeter wall angle shall be 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour complete all as specified and as directed. |
| 17 | S & F in repair suspendedfalse ceiling with \"E\" grid suspended ceiling grid system of grid size 600 x 600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24 x 0.3mm using 4mm thick high pressure steam cured classic variant E-Board, designer pattern to be placed in the grid suspended by 2mm dia GI wire at distance not exc 1.2m center to center with butterfly clips including preparation of surface and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed. |
| 18 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing)and rubbish off the premises complete all as specified and as directed. |
| 19 | M & L for Non skid Ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick Screed bed or bedding layer of mortar for laying floor finishes incement mortar (1:6) complete all as specified and as directed. |
| 20 | M & L for (1st quality) colouredvitrified ceramic tile 8 - 10 mm thick , light shade(square) polished, area of each tiles not exc 0.36 Sqm each in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including screed bed or bedding layer 15mm thick in cement mortar 1:6complete all as specified and as directed. |
| 21 | All as per item no. 20 but on vertical surfaces such as skirting/dados etc over and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed. |
| 22 | M & L for Glazed ceramic coloured tiles in vertical surfaces of size 600x300x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed. |
| 23 | Cutting out cracks to V- section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry (1:3) complete all as specified and as directed. |
| 24 | Demolition of PCC in padding above ground floor and paving n. exc 15cm thick complete all as specified and as directed. |
| 25 | M&L for cement concrete type B-0 (1:2:4) (12.5mm graded stone aggregate) as in roof padding for levelling/maintaining slope etc complete all as specified and as directed. |
| 26 | M & L for 10mm thick rendering on fair faces of brick work or concrete surface in CM (1:3) including finishing the surface even and fairusing 100% coarse sand on roof surface including water proofing compound as per manufacturer\"s instructions complete all as specified and as directed.Note :-WPC shall be measured and paid under respective item |
| 27 | M & L Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete including flashing and junction of parapets etc and surface painting with a layer of hot blown bitumen of any penetration applied hot @ 1.2 kg per Sqm, blended with grit or pea size gravel @ 0.006 Cum per sqm and lightly tempered (area of flashing etc shall be added to the roof area) over and including applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces complete all as specified and as directed. |
| 28 | M & L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in roof kerbs, benching, coping, padding, kneelers complete all as specified and as directed. |
| 29 | M & L for provision of roof treatment with polymeric water proofing membrane all as given below :-(a)Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed.(b) Applying a coat of bituminous primer conforming to IS : 3384-1986 @ 0.25 Iitres/sqm. (c) Applying and laying 3mm thick APP membrane having non oven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners.The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3.(d) M & L for two coats of aluminium paint over membrane surface complete all as specified and as directed. |
| 30 | M & L for provision of roof treatment with polymeric water proofing membrane all as given below :- (a)Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed.(b)M & L for plastering 10mm thick in CM 1:3 using 100% coarse sand on roof surface including water proofing compound as per manufacturer\"s instructions (c) Applying a coat of bituminous primer conforming to IS : 3384-1986 @ 0.25 Iitres/sqm. (d) Applying and laying 3mm thick APP membrane having non oven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3.(e) M & L for cement concrete tiles 30 cm x 30 cm x 20-22mm thick, machine pressed, set, jointed and pointed in neat cement slurry as in floors/terraces over and including 15mm thick screed bed in CM 1:4 complete allas specified and directed. |
| 31 | M & L for PCC 1:3:6,type C2 (40mm graded stoneaggregate) as foundation, filling and mass concrete complete all as specified and as directed. |
| 32 | Taking down eaves gutters and rain waterpipes of pressure rating 4kg /cm2 (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc complete all as specified and as directed. |
| 33 | Supply and fixing 110mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall complete all as specified and as directed. |
| 34 | Supply and fixing 75mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall complete all as specified and as directed. |
| 35 | Supply and fixing PVC(SWR) bends 110mm dia complete all as specified and as directed. |
| 36 | Supply and fixing PVC(SWR) bends 75 mm dia complete all as specified and as directed. |
| 37 | Material and Labour for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed. |
| 38 | Material and Labour for preparation of old treated surface of wall and applying two coats of cement base paint over a coat of primer including Washing, rubbing down and stopping of distempered and painted surfaces complete all as specified and as directed. |
| 39 | M & L for preparation of new plastered surfaces of wall and applying three coatsof white wash complete all as specified and as directed. |
| 40 | Material and labour for Cleaning the concrete surface by brushing & watering and applying a coat of tapecrete P-151 Acrylic Polymer Modified cementitious slurry consisting of one part of TAPECRETE P-151 and two parts of cement by weight and shall be allowed to dry for 4-6 hours. Applying a coat of TAPECRETE brush topping 1.5mm thick consisting of one part of TAPECRETE P-151, two parts of cement and two parts of silica sand by weight and cured to 2 days complete all as specified and as directed. |
| 41 | M&L for providing and applying fibre reinforced elastomaric liquid water proofing membrane with resilient acrylic polymershaving sun reflective index (SRI) of 105 on top of concrete roof in three coats @ 10.76 ltrs / 10 sqm. One coat of self priming of elastomaric water proofing liquid (Dilution with water in the ratio 3:1) and two coat of undiludted elestomeric waterproofing liquid (dry film thicknesscomplete allocation / system not less that 500 micron).The operation shall be carried out after scrapping and properly cleaning loose partical with wire brushes complete all as specified and as directed. Note :- Treatment shall be done through authorised representative of manufacturer. |
| 42 | S&F in repair bib taps 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, chromium plated, screwed for iron pipe or for brass ferrule including all accessories complete all as specified and as directed. |
| 43 | S & F in repairfor CP Pillar taps fancy type15mm brass with capsten head chromium plated, screwed down high pressure with or without lettered \"hot or cold\" water long screwed both ends for iron pipe complete all as specified and as directed. |
| 44 | S & F in repair CP brass stop/angle valves 15mm bore fancy type chromium plated with quarter turn handle and wall flange complete all as specified and as directed. |
| 45 | S & F in repairfor 15mm bore CP central hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. |
| 46 | S & F in repair Single lever Wall mixer 3 in 1 system with provision of both hand shower and over head shower complete with 115mm long bend pipe on upper side connecting legs and wall flanges (without hand and over head shower) including all fittings and fixed complete all as specified and as directed. |
| 47 | S & F in repair Overhead shower 200 x 200mm square shape single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 450mm long including all fittings and fixed complete all as specified and as directed. |
| 48 | S & F in repair health faucet (hand shower) with 1 mtr flexible tube with hot and cold water supply wall hook, bracket etc complete set of superior quality complete all as specified and as directed. |
| 49 | S & F in repair Glass corner shelf, fancy type, 250x250 and 10mm thick fixed with brass bracket and screwed complete all as specified and as directed. |
| 50 | S & F in repair Sheet glass shelfassembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket, guard and railing 60cm long complete all as specified and as directed. |
| 51 | S & F in repair 15mm bore concealedstop valvesbrass, chromium plated long shank, with capstan head and cup, screwed both ends for iron pipe or for union complete all as specified and as directed. |
| 52 | S & F in repair 20mm bore gate valves with iron wheel head, screwed both ends for iron pipe or for union complete all as specified and as directed. |
| 53 | S & F in repair 15mm bore gate valves with iron wheel head, screwed both ends for iron pipe or for union complete all as specified and as directed. |
| 54 | S & F in repairBrass chromium plated bottle traps for wash basins of 32mm bore of trap with inlet and outlet screwed for pipe or connections includingnecessary packing, union and cap and fixed complete all as specified and as directed. |
| 55 | S & F in repair PVC low level flushing cistern 10ltrs capacity, syphonic action type, white with inlet ball valve, float and handle including brackets with 32mm dia flush pipe of polythelene of low or high density complete all as specified and as directed. |
| 56 | S & F in repair PVC connection pipe 15mm bore with PTMT nuts of 600mm long complete all as specified and as directed. |
| 57 | S & F in repair swivel CP shower rose with long arm 125 mm dia complete all as specified and as directed. |
| 58 | S & F in repair WHB vitreous china, white, flat back, size 550x400mm incl brackets, waste coupling and waste pipe complete all as specified and as directed. |
| 59 | S & F in repair vitreous china Water closet pedestal pattern with seat cover white and flushing pipe 32mm dia for low level flushing cistern (excluding fixing bolts, flushing cistern and flush pipe) including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe, etc complete all as specified and as directed. |
| 60 | S & F in repair vitreous china squatting pan Orissa pattern long pan size 580 x 440mmwith CI traplong neck 100mm with integral foot rest & fixing incl making good floor to match complete all as specified and as directed. |
| 61 | S & F in repair waste pipe 32mm for WHB & sink complete all as specified and as directed. |
| 62 | S & F in repair grating doom 100mm dia of stainless steel (min wt-25gms) complete all as specified and as directed. |
| 63 | S & F in repair plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed. |
| 64 | DisconnectingPVC water tanks of capacity exc 250 & n. exc 500 ltr and refixing the same after necessary cleaning and repair complete all as specified and as directed. |
| 65 | Dismantling water tanks of capacity exc 250 & n. exc 500 ltrand S & F 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and as directed. |
| 66 | Dismantling water tanks of capacity exc 500 & n. exc 1000 ltr and S & F 1000 ltrs capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and as directed. |
| 67 | S & F in repair PVC water tank of capacity 500/1000 Ltr including cover with locking arrangement complete all as specified and as directed. |
| 68 | Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes exc 250 & n exc 500 ltrs etc complete all as specified and as directed. |
| 69 | Cleaning and removing all scale and dirt,etc,from tanks and from mouths of circulating pipes exc 500 & n exc 1000 ltrs etc complete all as specified and as directed. |
| 70 | S & F in repair 20mm dia ball valve high pressure, of PTMT with epoxy coated aluminium rod & high density plastic ball & fixed complete all as specified and as directed. |
