Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-11-2023 | Critical dates | Date | 25-11-2023 |
| 2 | 15-11-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-11-2023 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete of any description and in any position and disposing off debris properly outside MD land complete all as specified and as directed. |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 3 | M&L for 100 mm thick PCC 1:4:8 type D-2 using 40mm stone aggregate as in sub base floor/floors and paving etc complete all as specified and directed. |
| 4 | M&L 25mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggre) as in sub base for tiles in floors complete all as specified and directed. |
| 5 | M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in sub base floor/floors and paving etc complete all as specified and directed. |
| 6 | Material & labour for 10 to 12 mm thick vitrified unglazed and unpolished, scratch resistant, matt finished coloured tiles (square/rectangular) of size not less than300mm x 300mm asin parking /hardstanding etc including set, jointed in cement slurry and pointed in white or coloured cement to match the colour/ shades of tiles laid over and including 15 mm thick screed bed in CM 1:4complete all specified and directed. |
| 7 | Material & labour for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tileexceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles, laid over & including 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 8 | Material & labour for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tileexceeding 0.36 sqm but not exceeding 0.42 sqm, as in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 10mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 9 | Material & labour for Non skid ceramic tiles light coloured (square/rectangular)of size 400 X 400 mm and thickness 7-8 mm thick , in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 10 | Material & labour forglazed ceramic tiles light coloured of size 300x600mm and thickness 7-8 mm, on vertical surfaces, set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles laid over and including rendering 10 mm thick in CM 1:4 on wall complete all as specified and directed. |
| 11 | S&F rubber moulded Machine pressed PCC interlocking paver block confirming to IS 15658-2006 ofsize80 mm thicknessM-40 Grade with grey cement and pigment laid dry over and including25mm thick river washed sand cushioning as in floor, shape and colour as approved by GE. |
| 12 | S&F rubber moulded chequered cement concrete tiles 25 mm thick of any size, colour and pattern as approved by GE set, jointed and pointed in neat cement slurry in floors laid over and including 15mm thick screed bed in CM 1:6 with grey cement and pigments complete all as specified and as directed. |
| 13 | M&L for Pre-cast cement concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) as in kerb stone solid blocks 10cm thick, exc. 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed. |
| 14 | Demolition of stone/ boulder masonry, built in cement/ lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 15 | Taking downcement or cement lime plaster work any description from brick or stone wall/ ceiling etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified & directed. |
| 16 | Material & labour for squared rubble walling, Jodhpur type, brought to courses, curved on plan to a mean radius not exceeding 6m, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed. |
| 17 | Material & labour for squared rubble walling (Except stone) Jodhpur type, brought upto courses, curved on plan to a mean radius not exceeding 6m, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed. |
| 18 | Material & labour for rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork surfaces in cement mortar 1:4, surface finished fair and even complete all specified and directed |
| 19 | Material & labour for rendering 10 mm thick on concrete surfaces in ceiling in cement mortar 1:4, surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 20 | Material & labour for keyed pointing on stone masonry surfaces or surface other than fair face of brickwork surfaces in cement mortar 1:4complete all specified and directed. |
| 21 | M&L for preparation of new plastered or unplastered surfaces of ceilling and applying three coat of white wash complete all as specified and as directed. |
| 22 | M&L for preparation of wall surfaces and applying one coat of white cement base wall care putty 2 mm thick on walls finished even and smooth with sand paper and applying two coats of oil bound distemper complete all as specified and directed. |
| 23 | M&L for preparation of new plastered or unplastered surfaces of wall and applying three coat of white wash complete all as specified and as directed. |
| 24 | M&L for preparation of new plastered or unplastered surfaces of wall and applying two coat of cement based paint complete all as specified and as directed. |
| 25 | Taking down old existing roof treatment (APP membrane) and removing from site complete all as specified and as directed. |
| 26 | M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed. |
| 27 | M&L for brushing neat cement slurry with 3 kg of cement per Sqm complete all as specified and directed. |
| 28 | M&L for average 50 mm thick cement concrete 1:3:6type C-0 (using 12.5 mm graded stone aggregate) in padding finishing surface of concrete topping even and smooth without using extra cement complete all as specified. |
| 29 | M&L 10mm thick plastering in cm 1:3 on green concrete roof surfaces mixed with water proofing compound @ 3% by weight of cement, surface finished even and smooth without using extra cement complete all as specified.Note :- WPC shall be measured and paid separately. |
| 30 | Supply only integral water proofing compound ISI Marked |
| 31 | M&L for applying APP modified membrane (minimum 3 mmthick), it shall be taken upto height of minimum 300mmthrough a fillet of 75mmx75mm and shall be inserted inside a groove cut in the parapet and fixed. If the height of parapet is 300mm or less, membrane shall be taken till top of the parapet and finished after covering the top surface to the parapet. For RCC inverted beam the whole beam shall be covered with membrane irrespective of the depth. In case of roof projection, the membrane shall be taken 50mm on the reverse side of roof at the edges with non-woven polyster reinforcement/mat (centre core) with thermal insulation with white mineral gravel finish on upper side of membrane laid by torch application method with overlaps 75 mm on length side and 100 mm on the width side as per manufacturer’s instructions over a coat of approved cold applied bituminous oil based primer (IS- 3384) @ 250 gm/sqm complete all as specified and as directed by Engineer-in-Charge. |
| 32 | M&L for Providing cement concrete 1:3:6 Type C0 using 12.5 mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified.. |
| 33 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4 sqm each and removing from site complete all as directed. |
| 34 | Taking down chowkats or frames with shutters (without taking off shutters from the frames)not exceeding 1.5 sqm each and removing from site complete all as directed. |
| 35 | Taking down shutters of any descriptionexc. 1 sqm and n. exc. 2 sqm each and removing from site complete all as directed. |
| 36 | Taking down shutters of any description n exc. 1 sqmeach and removing from site complete all as directed. |
| 37 | M&L for rolled mild steel work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including hinges welding, confirming to grade Fe-290 (Gde E-165) complete all as specified and directed. |
| 38 | S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out ofsolid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing. (Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly) |
| 39 | S&F factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face, with wood free EPS complete per specification & drawing. |
| 40 | S&F flush door shutters, 30mm thick solid core construction, with block board core and plywood face panels with 0.90 mm thick Decorative laminate type 1 on both side, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer instructions complete all as specified and as directed. |
| 41 | S&F factory made Steel windows 1.25 mm thick box type (primer coated) ERW hollow P sections of size 60mm X 25mm including grill using 10 Sqmm bar double riveted both gauge and glass shutter comprised gauged glazed skelton shutters ERW section 50mm X 20mm and 1mm thick with two openable leafs consisting 2 nos sash bar of T section 20mm X 3mm complete welded to frame with one vertical mullion of ERW box type T section of size 60mm X 25mm and 1.25 mm thick including cutting holes and making good dismanttled portion in PCC 1:2:4 type B1, (four numbers in each window) including following fittings welded to frame shutter :- (a) Hold fast, 150 mm long of 12mmX3mm made to shape 04 nos per window(b)handle of Z section 20mmX25mm, 100 mm long - per leaf(c) Mild steel tower bolt 150mm long - 02 Nos per leaf (d) Z section 20mmX25mm, 100 mm long stopper -01 nos per leaf(e) Cleat 55mm long of hollow square 15mm X20mmX63mm welded to hinge -01 Nos per Leaf(f) MS pintal hinges of size 75mmX12mm- 02 Nos per leaf including stainless steel wire cloth, 0.25mm to 0.36mm nominal dia of wire and average width of aperture 1.40mm to 2mm and fixed with aluminium wire staples and glass pan 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint complete all as specified and directedNOTE:- (i) During fixing of window surface shall be make good in plumb with existing finishes like cement plaster, similiar wall tile, floor tile etc as per site requirement . |
| 42 | S&F factory made Ventilators 1.25 mm thick box type (primer coated) ERW hollow P sections of size 60mm X 25mm including grill using 10 Sqmm bar double riveted both gauge and glass shutter comprised gauged glazed skelton shutters ERW section 50mm X 20mm and 1mm thick with two openable leafs consisting 2 nos sash bar of T section 20mm X 3mm complete welded to frame with one vertical mullion of ERW box type T section of size 60mm X 25mm and 1.25 mm thick including cutting holes and making good dismanttled portion in PCC 1:2:4 type B1, ( four numbers in each window ) including following fittings welded to frame shutter :-(a) Hold fast, 150 mmlong of 12mmX3mm made to shape 04 nos per ventilator(b)handle of Z section 20mmX25mm, 100 mm long - per leaf(c) MS tower bolt 150mm long - 02 Nos per leaf (d) Z section 20mmX25mm, 100 mm long stopper -01 nos per leaf(e) Cleat 55mm long of hollow square 15mm X20mmX63mm welded to hinge -01 Nos per Leaf(f) MS pintal hinges of size 75mmX12mm- 02 Nos per leaf including stainless steel wire cloth, 0.25mm to 0.36mm nominal dia of wire and average width of aperture 1.40mm to 2mm and fixed with aluminium wire staples and glass pan 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint complete all as specified and directedNOTE:- (i) During fixing of ventilator surface shall be make good in plumb with existing finishes like cement plaster, similiar wall tile, floor tile etc and as per site requirement . |
| 43 | M&L for preparation of new steel surfacesof any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over and including a coat of red oxide or zinc chrome primer complete all as specified and directed. |
| 44 | S&F stainless steel butt hinges, medium weight of size 100 mm complete all as specified and directed. |
| 45 | S&F 150 mm long stainless steel barrel tower bolts(ISI Marked) complete all as specified and directed. |
| 46 | S&F 100 mm long stainless steel barrel tower bolts(ISI Marked) complete all as specified and directed. |
| 47 | S&Fstainless steel handles, fabricated type of size 150 mm (ISI Marked) complete all as specified and directed. |
| 48 | S&F 300 mm long stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet and fixing bolts and sliding bolts of stainless steel (ISI Marked) complete all as specified and directed. |
| 49 | Supply and fixing in repairs aluminium (extruded section body) door closer hydraulically regulated designation No 1 universal type suitable for door shutters upto 700 mm in width and of weight not more than 35 Kg complete all as specified and directed. |
| 50 | S&F of 150 mm floor door stopper of aluminium alloy body and tongue andodised with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 51 | Supply & fixing in repairs 25mm dia stainless steelcurtain rod decorative type design and pattern as approved by GE including both end supports,complete allas specified and directed. |
| 52 | Supply & fixing in repairs 25mm dia stainless steelcurtain finials for curtain rod both ends complete allas specified and directed. |
| 53 | Dismantling wrought iron or mild steel work of any description not otherwise provided for and removing from site all as specified and directed. |
| 54 | S&F mild steel work in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. and similar work conforming Fe-290 Gde E-165 complete allas specified and directed. |
| 55 | S&F rolled mild steel work (structural) in Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc complete conforming Fe 410-W (Gde- E- 250) quality-A complete allas specified and directed. |
| 56 | M&L for dismantling any type of roof sheets plain or corrugated (AC/CGI) including taking outside MoD land complete allas specified and directed. |
| 57 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete allas specified and directed. |
| 58 | S&F pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete allas specified and directed. |
| 59 | S&F mild steel, plain black sheet 1.6 mm thick in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; waters tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete allas specified and directed. |
| 60 | Taking up or down steel tubing of 15 mm bore pipe and connection including cleaning for re-fixing or removal to storecomplete all as specified & directed. |
| 61 | Taking up or down steel tubing of 20 mm bore pipe and connection including cleaning for re-fixing or removal to storecomplete all as specified & directed. |
| 62 | Supply & fixing 15 mm bore, medium grade, galvanised iron pipe, with all fittings & fixed complete to walls & ceiling or laid in floor complete all as specified & directed. |
| 63 | Supply & fixing 20 mm bore, medium grade, galvanised iron pipe, with all fittings & fixed complete to walls & ceiling or laid in floor complete all as specified & directed. |
| 64 | Refixing of 15mm bore old steel tubing & connection in new or old position (walls, ceilings, floors etc) complete all as specified & directed. |
| 65 | Refixing of 20mm bore old steel tubing & connection in new or old position (walls, ceilings, floors etc) complete all as specified & directed. |
| 66 | Supply & fixing in repairs CP Bib taps long body, fancy type, 15 mm bore, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 67 | Supply and fixing in repairs 15 mm bore fancy typeoverhead shower with arm swivel joint chromium plated screwed down of size 200 mm X 200 mm complete all as specified and directed. |
| 68 | Supply and fixing in repairs of fancy typepillar taps cast copper alloy, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks & fly nuts for iron pipe of 15mm bore complete all as specified and directed. |
| 69 | Supply and fixing in repairs angle stop valves of 15mm bore cast copper alloy, chromium platedscrewed for 15mm bore iron pipe or union complete all as specified and directed. |
| 70 | Supply and fixing in repairs cast copper alloy, chromium platedfancy type 15 mm bore stop cock with long shank concealed type complete all as specified and directed. |
| 71 | Supply and fixing in repairs cast copper alloy, chromium platedhandspray (Health faucet) with flexible pipe length not less than 1.00 m (minimum) fixed for EWC/IWC suitable for 15mm bore pipe complete all as specified and directed. |
| 72 | Supply and fixing in repairs SS chromium plated grating of size 100 mm dia complete all as specified and directed. |
| 73 | Supply and fixing in repairstublar towel rail 20mm dia chromium plated brass of size 60cm long complete all as specified and directed. |
| 74 | Supply and fixing in repairsofbrass Chromium plated fancy type Towel Rack(two shelf) size 60 cm long and 18 to 20 mm dia complete all as specified and directed. |
| 75 | Supply and fixing in repairsSheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as approved by GE complete all as specified and directed. |
| 76 | Supply and fixing in repairsSheet glass corner shelf 300mm assembly consisting of 5.5mm thick sheet glasswith chromium plated bracket guard and railingas approved by GE complete all as specified and directed. |
| 77 | Supply and fixing in repairsbrass chromium plated Paper holder for EWC complete all as specified and directed. |
| 78 | Supply and fixing in repairsofbrass Chromium plated fancy type soap dish complete all as specified and directed. |
| 79 | Supply and fixing in repairsfor 20 mm bore of Ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe (wt not less then for 210 gms) complete all as specified and directed. |
| 80 | Supply and fixing in repairsof PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 81 | Supply and fixing in repairs Gun-metal, globe or gate valves of 20mm bore with half turn lever arm /iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 82 | Supply & fixing in repairs600 x 450 mm moulded glass looking mirror of selected quality and fixed to wooden plugs with chromium plated brass screws and cup washers in postion as directed. |
| 83 | Supply and fixing in repairs of vitreous chinawater closet (squatt pattern) of size 580x440mm, white, with and includingfoot rest (excluding flooring cistern & flush pipe) complete including provision of cement concrete bedding all as specified and directed. |
| 84 | Supply and fixing in repair of vitreous china wash down water closet pan (pedestal pattern) white and P or S trap including connection to drain flush pipe and anti syphonage pipe complete all as specified and directed. |
| 85 | Supply and fixingin repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed. |
| 86 | Supply and fixingin repairs EWC PVC seat cover, colour as approved by GE including all fitting arrangements complete all as specified and directed. |
| 87 | Supply and fixing in repairsPVC valveless syphonic action type flushing cistern low level 10 ltrs capicty white, fixed with new brackets complete all as specifed and directed. |
| 88 | Supply and fixing in repairsof flush pipe of polythene of low or high density or PVC 32mm for low level cistern complete all as specified and directed. |
| 89 | Supply and fixing in repairs of vitreous china WHB white flat back size 550mmx400mm with pedestal on new brackets excluding taps waste china & plug including bracket etc complete all as specified and directed. |
| 90 | Supply and fixing in repair stainless steel kitchen plate rack made out of1mm thick stainless steel of size 900 x 750 X220 mm ofbest quality complete all as specified and directed. |
| 91 | Supply and fixing in repairsinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes incl bedding in cement mortor to dwarf wall or cantilever brackets and connecting union to pipe overall size 915 x 460 mm, bowl size 410 x 330 x 160mm complete all as specified and directed. |
| 92 | Supply and fixing in repairs CP waste coupling 32 mm dia with long shank andfly nuts etc for wash basinscomplete all as specified and directed. |
| 93 | Supply and fixing in repairs CP waste coupling40mm dia for steel sink / urinal with long shank andfly nuts etc complete all as specified and directed. |
| 94 | Supply and fixing in repairsPVC Flexible waste pipe 32 mm dia with socket for steel sink upto floor level and length not less than 0.60 meter complete all as specified and directed. |
| 95 | Supply and fixing in repairs PVC Flexible waste pipe 40 mm dia with socket for steel sink upto floor level and length not less than 0.60 meter complete all as specified and directed. |
| 96 | Supply and fixing rotational moulded polyethylene water storage tank of capacity 1000 ltrs (Cylindrical vertical with closed top), three layer construction, ISI marked hoisted & fixed in position including GI light grade, over flow pipe 450mm and waste pipe 600mm long with all fitting etc. of 20 mm dia and including Ball valve of 20 mm dia high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe (wt not less then for 210 gms) including dismantling/taking out of old water tank of having capacity of exc 500 Ltr but not exc 1000 Ltr & removing to site etc complete all as specified and as directed. |
| 97 | Demolitionand breaking up150 mm boredrain pipes, soil, waste and rain water pipes etc(Salt glazed ware, AC or Reinforced concrete) set in cement mortar, in trenches or floors, including connections and fittings complete all as specified and directed. |
| 98 | Excavation in trenches in any type of soil, not exceeding 1.5m wide and not exceeding 1.5 in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc not exceeding 10 sqm on plan and getting out complete all as specified and directed. |
| 99 | Excavation in trenches in hard rock, not exceeding 1.5m wide and not exceeding 1.5 in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc not exceeding 10 sqm on plan and getting out complete all as specified and directed by the Engineer-in-Charge. |
| 100 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm in any type of soil complete all as specified and directed by the Engineer-in-Charge. |
| 101 | Removing excavated material to a distance exceeding 500.00 metres but not exceeding 1500 metresand depositing where directed at a level not exceeding 1.5 metres above the starting point complete all as specified and directed by the Engineer -in-charge. |
| 102 | Supply & fixing Reinforced Cement Concrete pipes 150mm dia, class NP2, laid & jointed complete with collars complete all as specified and directed by the Engineer-in-Charge. |
| 103 | Material & labour for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in bed to drain pipes of size 150 mm bore, including packing under & haunching against the sides of pipes after they are laid and tested complete all as specified and directed by the Engineer-in-Charge. |
| 104 | Supply & fixing in repairs PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed by the Engineer-in-Charge. |
| 105 | Supply & fixing in repairs PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed by the Engineer-in-Charge. |
| 106 | Supply & fixing PVC (SWR) pipe bends 75 mm dia provided with access door complete all as specified and directed by the Engineer-in-Charge. |
| 107 | Supply & fixing 75 mm PVC (SWR) branch piece single (Y) equal or unequal bend provided with accessable door inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and directed by the Engineer-in-Charge. |
| 108 | Supply & fixing 75 mm dia PVC (SWR), junction single, (Single T) equal or unequal provided with access doorinculding cutting outwall /concrete and finishing of surface to match existing surface complete all as specified and directed by the Engineer-in-Charge. |
| 109 | Supply & fixing PVC (SWR), 75mm dia of floor trap, with grating including jointing with solvent cement inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and directed by the Engineer-in-Charge. |
| 110 | Supply & fixing PVC (SWR) pipe bends 110 mm dia provided with access door complete all as specified and directed by the Engineer-in-Charge. |
| 111 | Supply & fixing 110 mm PVC (SWR) branch piece single (Y) equal or unequal bend provided with accessable door inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and directed by the Engineer-in-Charge. |
| 112 | Supply & fixing 110 mm dia PVC (SWR), junction single, (Single T) equal or unequal provided with access doorinculding cutting outwall /concrete and finishing of surface to match existing surface complete all as specified and directed by the Engineer-in-Charge. |
| 113 | Supply & fixing PVC (SWR) vent Cowl 110 mm dia complete all as specified and directed by the Engineer-in-Charge. |
| 114 | Supply & fixing PVC (SWR) P/S trap 125/110 mm bore inculding cutting outwall /concrete and finishing of surface to match existing surface complete all as specified and directed by the Engineer-in-Charge. |
| 115 | Supply & fixing PVC (SWR), 125/110mm dia of Gully trap, with grating including jointing with solvent cement inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and directed by the Engineer-in-Charge. |
| 116 | Material & labour for cutting into existing manholes for connecting new drains of 150 mm internal dia pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel ( ½ roundor3/4Section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed by the Engineer-in-Charge. |
| 117 | Material & labour for 50mm thick sand stone slab of any size as in manholes cover stone etc, set and jointed in cement mortar 1:4 complete all as specified and directed by the Engineer-in-Charge. |
| 118 | Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified. |
| 119 | Supply & fixing anodised aluminium snap grid frame work (600mm x 600mm) for false ceiling fixed with screw suspended Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified complete all as specified & directed by the Engineer-in-Charge. |
| 120 | S&F 8 mm thick exposed metal frame ceiling with fire retardant calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 x 600mm grid (Frame work for ceiling shall be measured and paid separately) all as specified and directed by Engr-in-Charge. |
| 121 | Material & labour for granite of 18mm to 20mm thick (of any type) work (table rubbed and polished) in steps,jambs,pillars, window cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble over and including 20mm screed bed in cement mortar 1:4complete all as specified & directed by the Engineer-in-Charge. |
| 122 | Supply and fixing 12 mm thick Plywood, grade BWP, type BB fixed with self tapping screws to timber/Iron frame work complete all as specified & directed. |
| 123 | Material and labour for 2 mm thick PVC tiles/sheets, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors complete all as specified & directed. |
| 124 | M&L for 150 mm thick Cement concrete1:2:4 type B-2,(using 40mm graded stone aggregate) laid in floors in alternate bays including necessary form work complete all as specified & directed. |
| 125 | M&L for disconnecting existing Tubelight/ceiling lightfrom ceiling/walland refixing the same tubelight on false ceiling/wallwith 4-5 feet long including necsessary 1.5 Sqmm 2 core copper cable for connection complete all as specified and direced. |
| 126 | M&L for preparation of old steel surfacesof any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over and including a coat of red oxide or zinc chrome primer complete all as specified & directed. |
| 127 | M&L for preparation of old wodden surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed. |
| 128 | M&L for preparation of old wall surfaces and applying one coat of white cement base wall care putty 2 mm thick on walls finished even and smooth with sand paper and applying two coats of oil bound distemper complete all as specified and directed. |
| 129 | Excavation over areas n exc 1.5m deep & getting out in soft/loose soil complete all as specified and directed. |
| 130 | M&L for PCC 1:4:8 type D-2(using 40mm graded stone aggregate) in foundation , sub base, filling and mass concrete complete all as specified and directed. |
| 131 | M&L for precast cement concrete solid building blocks walling exc 10 cm thick in PCC 1:3:6 type C-1 using 20mm graded stone aggregate, set and jointed in CM 1:6 complete all as specified and directed. |
| 132 | M&L for rainforcement cement concreteM-25 design mix (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 133 | M&L RCC M-25(Design mix ) (using 20mm graded stone aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 134 | M&L for reinforced cement concreteM-25 design mix (using 20mm graded stone aggregate) as in slabs supported on column etc complete all as specified and directed. |
| 135 | M&L for reinforced cement concrete type M-25 design mix (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed. |
| 136 | M&L for form work to sides ofconcrete foundation, footing, base of columns, raft and raft beam, sides of soffits (if any) of foudation and plith beam and similar works for rough finished surfaces complete all as specified and directed. |
| 137 | M&L for form work to sides of pillars, post, struts, columns etc with rough finished surfaces of concrete of square, rectangular or polygonal complete all as specified and directed. |
| 138 | M&L for form work tosoffits of suspended slab as roof slab, floor slab, landing and similar work n exc 200 mm thick rough finished surfaces of concrete of square, rectangular or polygonal complete all as specified and directed. |
| 139 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc. for rough finished surfaces of concrete complete all as specified and directed. |
| 140 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed. |
| 141 | M& L for mild steel TMT bars 6mm to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed. |
| 142 | M&L for rendering 15mm thick in CM 1:4 on concrete surface including finish even and smooth surfaces without using extra cement complete all as specified and directed. |
| 143 | M&L for rendering 15mm thick in CM 1:6 on concrete surface including finish even and smooth surfaces using without extra cement complete all as specified and directed. |
| 144 | M&L for rendering 10mm thick in CM 1:3 on concrete surface including finish even and smooth surfaces without using extra cement in ceiling complete all as specified and directed. |
| 145 | M&L for preparingnewly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over and including one coat of primer complete all as specified and directed. |
| 146 | M&L machine cut kota stone slab flooring 20-25mm thick laid over and including cement screed 15mm thick in cement mortar 1:6 laid & jointed with grey cement slury mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 147 | M&L machine cut kota stone 20-25mm thick laid overand including 15 cm thick cement plaster in cement mortor 1:4 on skirting, dado, riser of steps & pillars jointed with grey cement slury mixed with pigment to match the shade of the stone including rubbing and polishing complete all as specified and directed. |
| 148 | S&F Mild steel, plain 1mm thick, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 149 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 150 | S&F 4 mm thick sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 151 | M&L for preparation of new steel surfacesof any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over and including a coat of red oxide or zinc chrome primer complete all as specified & directed. |
| 152 | M&L for 75 mm thick hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 153 | M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection complete all as specified and directed. |
| 154 | M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade A complete all as specified and directed. |
| 155 | M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed. |
| 156 | S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as sspecified and directed. |
| 157 | Supply and fixing LED light fitting 2x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed. |
| 158 | Supply and fix flame proof exhaust fan, 305 mm sweep (12\") 1440 RPM,1120 CFM, single phasecomplete all as specified and directed. |
| 159 | S&F Flame proof weather proof DB SPN DB 8 way complete all as specified and directed. |
| 160 | Supply and fix Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed. |
| 161 | S&F MCB SP, 6 to 32 Amp, 10 KA, \"C\" series complete all as specified and directed. |
| 162 | S&F MCB SPN, 40 to 63 Amp, 10 KA, \"C\" series complete all as specified and directed. |
| 163 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 164 | Material & labour for earthing complete with galvanised steel earth electrode 60cmx60cmx6mm buried directly in ground vertically to depth not less than 2.25m below normal ground level with top edge of the earth plate at a depth not less than1.5m below ground level connected to and including GI earth wire 4mm dia, by meansof nuts, bolts, check nuts and washer etc, made of GI and connected to test point and earth dolly all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil PCC (1:3:6) Type C1 in chamber, precast RCC 50 mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 Kg/Square metre) with cast iron frame, funnel with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 40 mm bore medium grade GIprotection pipe, test point etc. complete all as specified and directed.NOTE :-The rate of above Item includes the cost of earth lead and GI protection pipe up to 7.5 Metres. GI earth wire beyond 7.5 Metre shall be measured and paid for separately. |
| 165 | Material & labour for sub main wiring with two runs of 1.5 Sqmm FRLS cable multistranded copper conductors 1100 volt grade IS- 694 marked drawn through and including surface steel conduit pipe medium grade ISI marked (not less than 20 mm dia) along with fittings and all accessorieson wall/ ceiling surface and including one run of 1.5 sqmm FRLS cable multistranded copper conductors 1100 volt grade IS- 694 as earth continuity conductor complete including taking down existing sub main wiring all as specified and directed.Note :Two runs of main wire and one run of earth wire & one run of steel conduit shall be measured and paid as one length. |
| 166 | Material & labour for sub main wiring with two runs of 2.5 Sqmm FRLS cable multistranded copper conductors 1100 volt grade IS- 694 marked drawn through and including surface steel conduit pipe medium grade ISI marked (not less than 20 mm dia) along with fittings and all accessorieson wall/ ceiling surface and including one run of 2.5 sqmm FRLS cable multistranded copper conductors 1100 volt grade IS- 694 as earth continuity conductor complete including taking down existing sub main wiring all as specified and directed.Note :Two runs of main wire and one run of earth wire & one run of steel conduit shall be measured and paid as one length. |
| 167 | S&F switch piano 16 amps flush type single pole one waycomplete all as specified and directed. |
| 168 | S&F socket outlet 2 in 1, 5 pin 16 amps flush type complete all as specified and directed. |
| 169 | S&F switch piano 5 amps flush type single pole one way complete all as specified and directed. |
| 170 | Supply, laying , testing and commissioning cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with conductor of size 10 sq mm 2 core stranded aluminium complete all as specified and directed. |
| 171 | S&F galvanised iron pipe 40mm dia light grade with all fittingscomplete all as specified and directed. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
