Various System Strengthening Works Under The Jurisdiction Of E.E, Eudd-Thakurganj, Lesa Cis-Gomti Lucknow.”, thakurganj-Uttar Pradesh

Various System Strengthening Works Under The Jurisdiction Of E.E, Eudd-Thakurganj, Lesa Cis-Gomti Lucknow.”- 1 Safe carriage, loading-unloading with proper stacking of following materialfrom ESC-Daliganjto Work Site/JE -Dump Store- 2 11/0.4 KV 400 KVA Transformer 3 GI Wire 4 1x400 SQ MM PVC CABLE 5 3x70/185 SQMM 11 KV XLPE Cable 6 ST Pole 11 Meter 7 Battery charger 8 Battery set 24 volt 9 11 KV O/D, S/Th Jointing kit 10 Installing, commissioning of 400 Kva Transformer including its connection in between 11 Kv line and LT line mounting of copper L-Piece 300x65x6 mm providing Al crimping lugs of size 250 mm²( All the materials except T/f will be arranged by the contractor) 11 Boring type earthing of 11/0.4 KV 630/400 KVA Substation by boring and lowering of 20 M deep or upto water level 1.5 dia B Class Jindal make GI Pipe its connection in between transformer and boring with G.I. Strip of size 50x6 mm(All the material, labour and T&P will be arranged by the contractor) 12 Installing battery charger at substation with proper accessories with connection LT line to pannel 13 Construction of retaining wall, fabrication & erection of Wiremesh fencing of size 5+3 & 2.0M height around Transformer and Distribution Pillar Box with retaining wall & 1 no. gate with locking arrangement made of MS Angle iron of size 50x50x6 mm jointed with nuts and bolts. The panel must be supported with MS Flat of size 50x6 mm.Wiremesh of size 10 SWG rectangle type, its painting as per norms of RESSPO.(All the material will be arranged by the contractor at his own cost). 14 Construction of plinth suitable of 400 KVA T/F including excavation of foundation base concreting of CC 1:6:12 (cement, fine sand & Brick Ballast) Fist class brick work in cement motor of ratio 1:4foundation CC in 1:4:8 Ratio ( Cement fine sand & brick Ballast) and CC work with ratio 1:2:4 cement coarse sand and stone grit of 20 mm Gauge as per RESPO Norms. 15 Fabrication erection plinthing of exposure ST pole structure on 9/11 Mtr long with stone pad grouting ST pole including mounting of with connecting I hook (ST Pole will be provided by the Department, Clamps & Connectors will be arranged by the Contractor ) 16 Hoisting of 11 KV 3x70 sqmm XLPE Cable (All the material will be arranged by the contractor at his own cost except cable). 17 Cable Stringging of 11 KV 3x120 sqmm XLPE Cable on proposed ST Pole 11 Meter long with proper I hook connecting & strangthing with necessary items. (All the material will be arranged by the contractor at his own cost except cable). 18 Supply and fixing of of following Materials 19 Al. Lugs Suitable for 240/400 Sq mm 20 Nut Bolt offsize 21 Copper L Piece suitable for 400 KVA T/F 22 GI Pipe 6 dia 23 Copper bus bar 24 Fuse unit 500 A 25 Danger board

INR 1180 /-

INR 9000.0 /-

Refer document