}

Tender For Repair And Maintenance Work Of Guard Room At Hqr Kos,Crpf,Pantha Chawk,Shrinagar,J&K., kashmir-Jammu And Kashmir

Central Reserve Police Force has published Tender For Repair And Maintenance Work Of Guard Room At Hqr Kos,Crpf,Pantha Chawk,Shrinagar,J&K.. Submission Date for this Tender is 03-10-2023. Paint Supply Tenders in kashmir Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

39765982
Tender For Repair And Maintenance Work Of Guard Room At Hqr Kos,Crpf,Pantha Chawk,Shrinagar,J&K.
Open Tender
NCB
Jammu And Kashmir
Kashmir
03-10-2023

Tender Details

Tender For Repair And Maintenance Work Of Guard Room At Hqr Kos, Crpf, Pantha Chawk, Shrinagar, J&K.; 1 Removing Dry Or Oil Bound Distemper, Water Proofing Cement Paint Andthe Like By Scrapping, Sand Papering And Preparing The Surface Smoothincluding Necessary Repairs To Scratches Etc. Complete. 2 Distempering With 1St Quality Acrylic Distemper, Having Voc ( Volatileorganic Compound ) Content Less Than 50 Grams / Litre, Of Approved Brandand Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour.Two Coats 3 Painting With Synthetic Enamel Paint Of Approved Brand And Manufactureof Required Colour To Give An Even Shade : In Wood Work & Steel Workone Or More Coats On Old Work 4 Providing And Applying White Cement Based Putty Of Average Thickness 1Mm, Of Approved Brand And Manufacturer, Over The Plastered Wallsurface To Prepare The Surface Even And Smooth Complete. 5 Extra For Veneered Particle Board With Teak Veneering On Both Sides 6 Providing And Fixing Precoated Galvanised Iron Profile Sheets ( Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge ) 0.50Mm ( + 0.05 % ) Total Coated Thickness With Zinc Coating 120 Grams Persqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer Onboth Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Shouldhave Protective Guard Film Of 25 Microns Minimum To Avoid Scratchesduring Transportation And Should Be Supplied In Single Length Upto 12Metre Or As Desired By Engineerin-Charge. The Sheet Shall Be Fixed Usingself Drilling / Self Tapping Screws Of Size ( 5.5X 55 Mm ) With Epdm Seal, Complete Upto Any Pitch In Horizontal / Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting Tosize And Shape Wherever Required. 7 Providing And Fixing Tiled False Ceiling Of Specified Materials Of Size 595X595 Mm In True Horizontal Level, Suspended On Inter Locking Metal Grid Of Hot Dipped Galvanized Steel Sections ( Galvanized @ 120 Grams / Sqm, Both Side Inclusive ) Consisting Of Main T Runner With Suitably Spaced Joints To Get Required Length And Of Size 24X38 Mm Made From 0.30 Mm Thick ( Minimum ) Sheet, Spaced At 1200 Mm Center To Center Andcross T Of Size 24X25 Mm Made Of 0.30 Mm Thick ( Minimum ) Sheet, 1200 Mm Long Spaced Between Main T At 600 Mm Center To Center To Form A Grid Of 1200X600 Mm And Secondary Cross T Of Length 600 Mm And Size 24X25 Mm Made Of 0.30 Mm Thick ( Minimum ) Sheet To Be Interlocked At Middle Of The 1200X600 Mm Panel To Form Grids Of 600X600 Mm And Wall Angle Of Size 24X24x0.3 Mm And Laying Falseceiling Tiles Of Approved Texture In The Grid Including, Required Cutting / Making, Opening For Services Like Diffusers, Grills, Light Fittings, Fixtures, Smoke Detectors Etc. Main T Runners To Be Suspended From Ceiling Using Gi Slotted Cleats Of Size 27 X 37 X 25 X1.6 Mm Fixed To Ceiling With 12.5 Mm Dia And 50 Mm Long Dash Fasteners, 4 Mm Giadjustable Rods With Galvanised Butterfly Level Clips Of Size 85 X 30 X 0.8 Mm Spaced At 1200 Mm Center To Center Along Main T, Bottom Exposed Width Of 24 Mm Of All T-Sections Shall Be Pre-Painted With Polyester Paint, All Complete For All Heights As Per Specifications, Drawings And As Directed By Engineer-In-Charge. 8 12.5 Mm Thick Fully Perforated Gypsum Board Tile Made Fromplasterboard Having Glass Fibre Conforming To Is: 2095 Part I, Of Size595x595 Mm, Having Perforation Of 9.7X9.7 Mm At 19.4 Mm C / C Withcenter Borders Of 48 Mm And The Side Borders Of 30 Mm, Backed Withnon Woven Tissue On The Back Side, Having An Nrc ( Noise Reductioncoefficient ) Of 0.79, With 50 Mm Resin Bonded Glass Wool Backing.12 Mm Cement Plaster Of Mix :1:4 ( 1 Cement: 4 Fine Sand ) 9 Providing And Fixing Water Closet Squatting Pan ( Indian Type W.C. Pan ) With 100 Mm Sand Cast Iron P Or S Trap, 10 Litre Low Level White P.V.C.Flushing Cistern, Including Flush Pipe, With Manually Controlled Device ( Handle Lever ) Conforming To Is : 7231, With All Fittings And Fixturescomplete, Including Cutting And Making Good The Walls And Floorswherever Required:White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm Withintegral Type Foot Rests 10 Cement Concrete Flooring 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Gradedstone Aggregate ) Finished With A Floating Coat Of Neat Cement, Includingcement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete.Sqm40 Mm Thick With 20 Mm Nominal Size Stone Aggregate 11 Providing And Fixing Aluminium Handles, Isi Marked, Anodised ( Anodiccoating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyedto Required Colour Or Shade, With Necessary Screws Etc. Complete :125 Mm 12 Providing And Fixing Isi Marked, Is : 1341, M.S. Heavy Weight Butthinges With Necessary Screws Etc. Complete :125X90x4.00 Mm 13 Providing And Fixing Bright Finished Brass Tower Bolts ( Barrel Type ) Withnecessary Screws Etc. Complete :100X10 Mm 14 Providing And Fixing Aluminium Sliding Door Bolts, Isi Marked Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) , Transparentor Dyed To Required Colour Or Shade, With Nuts And Screws Etc. Complete: 300X16 Mm 15 Providing And Fixing 1St Quality Ceramic Glazed Floor Tiles Conformingto Is : 15622 ( Thickness To Be Specified By The Manufacturer ) Ofapproved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1Cement: 3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3Kgper Sqm Including Pointing In White Cement Mixed With Pigment Ofmatching Shade Complete. 16 C.P. Brass Long Body Bibcock 15 Mm 17 G.I. Pipes 25 Mm Dia 18 Renewing Glass Panes, With Putty And Nails Wherever Necessaryincluding Racking Out The Old Putty:Float Glass Panes Of Nominal Thickness 4 Mm ( Weight Not Less Than10kg / Sqm ) 19 Rectangular Shape 453X357 Mm Mirror With Plastic Moulded Frame 20 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windowsand Other Frames, Wrought Framed And Fixed In Position With Hold Fastlugs Or With Dash Fasteners Of Required Dia & Length ( Hold Fast Lugs Ordash Fastener Shall Be Paid For Separately ) .Kiln Seasoned And Chemically Treated Hollock Wood

Key Value

Document Fees
Refer document
EMD
INR 9500.0 /-
Tender Value
INR 4.75 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail