Tender For Construction Of Office Building--- 1 ALL KINDS OF SOIL 2 CEMENT CONCRETE GRADE M-10 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE 3 CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE. 4 FILLING BY AVAILABLE EXCAVATED EARTH (EXCLUDING ROCK) IN TRENCHES, PLINTH, SIDES OF FOUNDATIONS ETC. IN LAYERS NOT EXCE 5 MOORUM/HARD COPRA 6 CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE. 7 REINFORCED CEMENT CONCRETE WORK IN BEAMS, SUSPENDED FLOORS, ROOFS HAVING SLOPE UP TO 15° LANDINGS, BALCONIES, SHELVES, 8 THERMO-MECHANICALLY TREATED BARS. (FE 500 D OR MORE) 9 HOT FINISHED WELDED TYPE TUBES. 10 FOUNDATIONS, FOOTINGS, BASES OF COLUMNS, ETC. FOR MASS CONCRETE. 11 LINTELS, BEAMS, PLINTH BEAMS, GIRDERS, BRESSUMERS AND CANTILEVERS. 12 SUSPENDED FLOORS, ROOFS, LANDINGS, BALCONIES AND ACCESS PLATFORM. 13 COLUMNS, PILLARS, PIERS, ABUTMENTS, POSTS AND STRUTS. 14 BRICK WORK WILL WELL BURNT OPEN BHATTA BRICKS CRUSHING STRENGTH NOT LESS THAN 25KG/CM² AND WATER ABSOPTION NOT MORE THAN 15 1:4 (1 CEMENT: 4 SAND) 16 1:4 (1 CEMENT: 4 SAND) 17 PROVIDING AND LAYING VITRIFIED FLOOR TILES MULTI/DOBULE CHARGED (MINIMUM TOP LAYER THICKNESS 2.0MM) NENO POLISHED SELF 18 AREA OF SLAB OVER 0.50 SQM. 19 PROVIDING AND LAYING RECTIFIED GLAZED CERAMIC FLOOR TILES 300X300 MM OR MORE (8MM TO 10MM THICK) OF 1ST QUALITY CONFORM 20 PROVIDING AND LAYING RECTIFIED GLAZED CERAMIC WALL TILES 300X450 MM OR MORE (8MM TO 10MM THICK) OF 1ST QUALITY CONFORMI 21 PROVIDING AND APPLYING 1.0 MM THICK WHITE CEMENT BASED WALL PUTTY OF BEST QUALITY, OVER PLASTERED SURFACE TO PREPARE TH 22 TWO OR MORE COATS ON NEW WORK 23 NEW WORK (TWO OR MORE COAT APPLIED @ 1.67 LTR/10 SQM OVER AND INCLUDING PRIMING COAT OF EXTERIOR PRIMER APPL 24 STRUCTURAL STEEL WORK RIVETED, BOLTED OR WELDED IN BUILT UP SECTIONS, TRUSSES AND FRAMED WORK, INCLUDING CUTTING, HOIST 25 IN GRATINGS, FRAMES, GUARD BAR, LADDER, RAILINGS, BRACKETS, GATESAND SIMILAR WORKS. 26 PROVIDING AND FIXING IN POSITION COLLAPSIBLE STEEL SHUTTERS (CHANNEL GATE) WITH VERTICAL CHANNELS 20X10X2 MM AND BRACED 27 30 MM THICK GLASS FIBRE REINFORCED PLASTIC (FRP) PANELLED DOOR SHUTTER OF REQUIRED COLOUR AND APPROVED 28 100 MM 29 200X10 MM 30 110MM DIAMETER 31 ORISSA PATTERN W.C. PAN OF SIZE 580X440 MM 32 RANGE OF FOUR URINAL BASINS WITH 10 LITRE WHITE P.V.C. AUTOMATICFLUSHING CISTERN. 33 WHITE VITREOUS CHINA WASH BASIN SIZE 630X450 MM WITH A SINGLE 15MM C.P. BRASS PILLAR TAP. 34 110 MM DIAMETER OD 35 15 MM NOMINAL OUTER DIA .PIPES. 36 20 MM NOMINAL OUTER DIA .PIPES. 37 C.P.BRASS FITTINGPROVIDING AND FIXING C.P. BRASS BIB COCK OF APPROVED QUALITY CONFORMING TOIS:8931 - 15 MM NOMINAL BO 38 CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE. 39 REINFORCED CEMENT CONCRETE WORK IN BEAMS, SUSPENDED FLOORS, ROOFS HAVING SLOPE UP TO 15° LANDINGS, BALCONIES, SHELVES, 40 THERMO-MECHANICALLY TREATED BARS. (FE 500 D OR MORE) 41 HOT FINISHED WELDED TYPE TUBES. 42 LINTELS, BEAMS, PLINTH BEAMS, GIRDERS, BRESSUMERS AND CANTILEVERS. 43 SUSPENDED FLOORS, ROOFS, LANDINGS, BALCONIES AND ACCESS PLATFORM. 44 COLUMNS, PILLARS, PIERS, ABUTMENTS, POSTS AND STRUTS. 45 BRICK WORK WILL WELL BURNT OPEN BHATTA BRICKS CRUSHING STRENGTH NOT LESS THAN 25KG/CM² AND WATER ABSOPTION NOT MORE THAN 46 1:4 (1 CEMENT: 4 SAND) 47 1:4 (1 CEMENT: 4 SAND) 48 PROVIDING AND LAYING VITRIFIED FLOOR TILES MULTI/DOBULE CHARGED (MINIMUM TOP LAYER THICKNESS 2.0MM) NENO POLISHED SELF 49 AREA OF SLAB OVER 0.50 SQM. 50 PROVIDING AND LAYING RECTIFIED GLAZED CERAMIC FLOOR TILES 300X300 MM OR MORE (8MM TO 10MM THICK) OF 1ST QUALITY CONFORM 51 PROVIDING AND LAYING RECTIFIED GLAZED CERAMIC WALL TILES 300X450 MM OR MORE (8MM TO 10MM THICK) OF 1ST QUALITY CONFORMI 52 PROVIDING AND APPLYING 1.0 MM THICK WHITE CEMENT BASED WALL PUTTY OF BEST QUALITY, OVER PLASTERED SURFACE TO PREPARE TH 53 TWO OR MORE COATS ON NEW WORK 54 NEW WORK (TWO OR MORE COAT APPLIED @ 1.67 LTR/10 SQM OVER AND INCLUDING PRIMING COAT OF EXTERIOR PRIMER APPL 55 STRUCTURAL STEEL WORK RIVETED, BOLTED OR WELDED IN BUILT UP SECTIONS, TRUSSES AND FRAMED WORK, INCLUDING CUTTING, HOIST 56 IN GRATINGS, FRAMES, GUARD BAR, LADDER, RAILINGS, BRACKETS, GATESAND SIMILAR WORKS. 57 PROVIDING AND FIXING IN POSITION COLLAPSIBLE STEEL SHUTTERS (CHANNEL GATE) WITH VERTICAL CHANNELS 20X10X2 MM AND BRACED 58 30 MM THICK GLASS FIBRE REINFORCED PLASTIC (FRP) PANELLED DOOR SHUTTER OF REQUIRED COLOUR AND APPROVED 59 100 MM 60 PROVIDING AND FIXING BRIGHT FINISHED BRASS HANGING TYPE FLOOR DOOR STOPPER WITH NECESSARY SCREWS, ETC. COMPLETE. 61 200X10 MM 62 110MM DIAMETER 63 ORISSA PATTERN W.C. PAN OF SIZE 580X440 MM 64 RANGE OF FOUR URINAL BASINS WITH 10 LITRE WHITE P.V.C. AUTOMATICFLUSHING CISTERN. 65 WHITE VITREOUS CHINA WASH BASIN SIZE 630X450 MM WITH A SINGLE 15MM C.P. BRASS PILLAR TAP. 66 110 MM DIAMETER OD 67 15 MM NOMINAL OUTER DIA .PIPES. 68 20 MM NOMINAL OUTER DIA .PIPES. 69 C.P.BRASS FITTINGPROVIDING AND FIXING C.P. BRASS BIB COCK OF APPROVED QUALITY CONFORMING TOIS:8931 - 15 MM NOMINAL BO 70 PROVIDING AND PLACING ON TERRACE AT ALL FLOOR POLYETHYLENE WATER STORAGE TANK ISI : 12701 MARKED WITH COVER AND SUITABL 71 CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE. 72 REINFORCED CEMENT CONCRETE WORK IN BEAMS, SUSPENDED FLOORS, ROOFS HAVING SLOPE UP TO 15° LANDINGS, BALCONIES, SHELVES, 73 COLUMNS, PILLARS, PIERS, ABUTMENTS, POSTS AND STRUTS. 74 LINTELS, BEAMS, PLINTH BEAMS, GIRDERS, BRESSUMERS AND CANTILEVERS. 75 SUSPENDED FLOORS, ROOFS, LANDINGS, BALCONIES AND ACCESS PLATFORM. 76 BRICK WORK WILL WELL BURNT OPEN BHATTA BRICKS CRUSHING STRENGTH NOT LESS THAN 25KG/CM² AND WATER ABSOPTION NOT MORE THAN 77 1:4 (1 CEMENT: 4 SAND) 78 NEW WORK (TWO OR MORE COAT APPLIED @ 1.67 LTR/10 SQM OVER AND INCLUDING PRIMING COAT OF EXTERIOR PRIMER APPL 79 TWO OR MORE COATS ON NEW WORK 80 SINGLE REBATE 100X50MM 81 35 MM THICK INCLUDING ISI MARKED STAINLESS STEEL BUTT HINGES WITH NECESSARY SCREWS. 82 THERMO-MECHANICALLY TREATED BARS. (FE 500 D OR MORE) 83 CIRCUIT WIRING 2X2.5 SQ.MM. 84 LIGHT POINT/FAN POINTS.SHORT POINT 85 LIGHT POINT/FAN POINTS.MEDIUM POINT 86 LIGHT POINT/FAN POINTS.LONG POINT 87 MEDIUM POINT.ON SEPARATE BOARD 88 1 OR 2 MODULE 89 6 MODULE 90 8 MODULE 91 6 AMP TO 32 AMP RATING SINGLE POLE & NEUTRAL(SPN) 92 10 AMPS 250 VOLT 3 PIN MODULAR TYPE 93 10 AMPS S.P.250 VOLT MODULAR SWITCH 94 20 AMPS S.P.250 VOLT MODULAR SWITCH 95 SUPPLYING AND FIXING AS PER SPECIFICATION BAKELITE CEILING ROSE 3 PLATE OFAPPROVED MAKE ISI MARKED WITH NECESSARY MATE 96 4 X 40 WATT 97 20 WATT 98 450MM SWEEP 900 RPM
