|
| 1 | Providing and laying APP (Atactic polypropylene polymer) modified prefabricated 3mm thic water proofing membbrane all complete as per approved design, building specification and direction of E/I. (14.90.1) |
| 2 | Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I. (5.5.14) |
| 3 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3 mm M.S. gusset plates at the junctions and corners,all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angles 40x40x6 mm for diagonal braces (10.5.1) DSR |
| 4 | Providing and laying Doublecharge vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with water absorptionless than 0.08% and conforming to IS: 15622 / ISO 13006 of approvedmake, in all colours and shades, laid on 20mm thick cement mortar 1:4(1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm (5.6.28) |
| 5 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I. (5.6.23.1) |
| 6 | Providing and fitting on wall face unplasticised rigid PVC rain water pipes confirming to IS :13592 type A including jointing with seal ringall complete job. (110 mm dia)(12.41.2 DSR) |
| 7 | Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. (5.10.1) |
| 8 | Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. (5.6.3) |
| 9 | Providing P.C.C M-200 with nominal mix of (1:1.5:3) in foundation and plinth with approved quality of Stone as per building specification and direction of E/I(5.3.1.1) |
| 10 | Providing tor steel reinforcement of 10mm, 12mm & 16mm dia bars as per approved deign and drawing as per building specification and direction of E/I (a) 10mm (TMT coil Fe 500) (only valid for TATA(Tucson), SAIL, JSPL, Elcetrosteel Ltd. Bokaro and Vizag(RINL) (b) 12mm (TMT coil Fe 500) (only valid for TATA(Tiscon), SAIL, JSPL, Elcetrosteel Ltd. Bokaro and Vizag(RINL) (c) 16mm (TMT coil Fe 500) (only valid for TATA(Tiscon), SAIL, JSPL, Elcetrosteel Ltd. Bokaro and Vizag(RINL) (5.5.1(II)+ 5.5.5(abc) |
| 11 | Providing 12mm cement plaster(1:4)with Punning clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all completeas per building specification and direction of E/I. (5.7.2+5.7.11) (5.7.2.+5.7.11) |
| 12 | Providing designation 75B brick work in C.M. (1:6) in Superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints,cost of screening materials raking out joints to 15mm depth , curing, taxes & royalty all complete as per building specification & direction of E/I. (5.2.14) (5.2.14) |
| 13 | Providing 12mm cement plaster(1:6)with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all completeas per building specification and direction of E/I. (5.7.3) (5.7.3) |
| 14 | Providing 2 coats of SYNTHETIC ENAMEL PAINT of approved shade and make over STEEL SURFACE grills& railings including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I. (5.8.45) |
| 15 | Providing Two coats ofSnowcem of approved shade & make over a coat of cement primer on new surface including preparing the plaster surface smooth with sand paper scaffolding, curing and taxes all completeas per building specification & direction of E/I. (painting on innner sides ) (5.8.24) |
| 16 | Synthetic jogging track: . ( work incl. Providing and installation of synthetic track- 15mm thick, BC-30mm, BM- 50mm, WMM - 150mm, GSB - 150mm, Earth work excavation - approx. 300mm depth, both side precast cc kerb 100mm thick.) |
| 17 | Providing and fixing concertina coil fencing with punched tapeconcertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron \"Y\" shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per directionof Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mmwith tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately). (DSR 16.53) |
| 18 | Supplying,fitting and fixing M.S. 40X40X4mm IS2062 grade A M.S. angle, hoisting in steps, welded with 6mm dia and 75mm long M.S. rods, anchorage fixed in concrete steps at the time of casting, including taxes all complete as per direction of E/I. |
| 19 | Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(5.2.14) |
| 20 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps atjunctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelingand dash fasteners to be paid for separately) : |
| 21 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
| 22 | Carriage of Materials-Sand (Lead 15KM) |
| 23 | Bricks (Lead 8 KM) |
| 24 | Stone Chips (Lead 15KM) |
| 25 | Cement + Rod (Lead 1 KM) |
| 26 | Fabrication ,Installation & Testing&Commissioning of 14 SWG sheet inclousre wih Incoming -100 amps,TPN MCCB with built in magnetic setting -1 nos ,63A cHANGCOVER -2 NOS (ON-lOAD)Ammeter,ASS,CTS ,Volt meter,vss,fuses,2 setof phase indicating lamp with fuses,cuBusbar and all asso.outgoing ;-32A SPN MCB -4 NOS ,16A spn mcb -2 nos |
| 27 | Copper tube of size 5/8\" for split ac unit 1/1.5/2/3 tr capacity including nitride rubber insulationM-1620 |
| 28 | Supplying fitting and fixing of Drain pipe for AC |
| 29 | Point wiring in PVC conduit ,with piano type switch :-wiring for light point /fan point /exhaust fan point /call bell wth 1.5 sqmm fr pvc insulated copper conductor single core in surface /recessed pvc conduit ,piano type switch ,phenolic laminated sheet with suitable size pvc/ms box etc as required (1.1.3)group C |
| 30 | Power plug wiring in PVC Conduit (2x4 sqmm)wiring for light/power plug with 2x4 sqmm fr pvc insulated copper conductor single core cable in surface /recessed PVC conduit ,along with 1 nos 4 sqmm FR pvc insulated copper conductor single core cable for loop earthing etc as required |
| 31 | Circuit /submain wiring along earthwire along with the following sizes of FR PVC insulated copper conductor single core cable in surface /recessed PVC conduit as required 2x2.5 sqmm x1x1.25 sqmm earth wire |
| 32 | Supplying and fixing batten /angle holder including connection as required |
| 33 | Supplying and fixing of following ways surface /recess mounting vertical type 415 volts tpn mcb distrubution board of sheet ,dust protected duly powder painted ,inclusive of 200 amps tinned copper tinned copper bus bar all comp8 way (8+24),Double door ,vertical type |
| 34 | Goods & Service Tax (G.S.T.) - |
| 35 | Labour Cess - |
