Construction Of Government Law College At Karaikudi In Sivagangai District., Karaikudi-Tamil Nadu

TDR : 39383811

Tender Notice
BOQ

Expired

Karaikudi , Tamil Nadu

Tender Brief : Construction Of Government Law College At Karaikudi In Sivagangai District.

Document Fees
Refer document

EMD
₹ 3990000.0 /-

Tender Value
₹ 79.60 Crore /-

Submission Date
27-09-2023

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by thedepartmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.
2	Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.
3	Refilling with excavated earth other than crushed stone sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officersin layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification
4	Supplying andFILLING GRAVELin \"foundation andbasementin layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification.
5	Supplying and filling in foundation, basement, etc with filling stone dust in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
6	Supplying and filling 40mm guauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification.
7	Supplying and filling 20mm guauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification.
8	Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundationincluding dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification
9	Brick work in Cement Mortar 1:5, using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification.
10	For Foundation and Basement
11	Ground floor
12	Brick work in Cement Mortar 1:6, using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification.
13	For Foundation and Basement
14	Ground floor
15	First Floor
16	Second floor
17	Third floor
18	Brick work in Cement Mortar 1:3, using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification.
19	For Foundation and Basement
20	Damp proof course with Cement Mortar 1:4 (One Cement and Four crushed stone sand) 12mm thick mixed with best approved quality water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% by weight of cement used, finishing and curing etc. complete complying with standard specification.
21	Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oakjoists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)
22	Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)
23	For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, and beams, etc.
24	For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc.
25	For plane surfaces such asrectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.
26	For circular columns
27	Providing additional strutting to centering of RCC slabs of plain surface for every additional 1.0 metre height or part thereof but not less than 30 cm, over the initial 3.00 metre height from floor level using casurina props of 10cm to 13cm dia including cross bracing etc., complete complying with standard specification and as directed by the department officers.
28	For every one meter above 3.30m
29	Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).
30	For Foundation and Basement
31	Ground floor
32	First Floor
33	Second floor
34	Third floor
35	Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 350 kglms and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m\") 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).
36	In First Floor
37	In Third Floor
38	Providing and laying in position, Standardised Concrete Mix M-35 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 425 kg/m3 and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m\") 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).
39	In Ground Floor
40	In First Floor
41	In Second Floor
42	Post Tensioning Work:Design and execution of post tensioning work, including decoiling, the strands, cutting to the required lengths, supplying, laying of HT strands sheathing (GI corrugated ducts 0.3mm thick) jointing with couplers and inserting the strands, profiling, fixing liveend anchorages, including supply of stressing anchorages, suitable for 5-5 & 5-4 tendons, grout vents, making dead end anchorages, including flowering the strands, fixing tendon support bars, supervising the fixing of antibursting reinforcement, stressing the cables, end trimming, grouting the cables, with cement slurry, mixed with admixtures with required tools, plants, and machineries, and consumables etc. (Shuttering, concreting & reinforcement steel shall be paid under respective items) at all heights including all leads, lifts, coordination, with the post- tensioning agency, preparation of drawings, obtaining approval from the Employer / Architect etc. Rate to include providing water, power, cement and admixture for grouting,packing of sheathing and anchorages blockings, filling of recess pockets after stressing using grouts (cement slurry mixed with approved admixtures) including providing access to post tensioning at all heights including all leads, lifts etc., all complete and as approved and as directed by the Employer Architect but excluding shuttering, concretin & reinforcement steel which shall be payable under respective items separately.
43	Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification.(Contractor has to make his own arrangements for the supply of steel and binding wire)
44	Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
45	Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.
46	Cement Concrete 1:3:6 (One Cement, Three crushed stone sand and Six broken stone jelly) using 40mm size hard broken stone jelly for dummy columns, excluding cost of centering shuttering reinforcement grills and fabrication charges but including curing etc. complete. (Reinforced Cement Concrete 1:2:4 for slab to be extended upto top of splashing with pressed tiles and future extension rods to be embedded in CC 1:3:6 (One Cement, Three crushed stone sand and Six hard broken stone jelly).Dummy columns should be at least 1 metre height)
47	For First floor
48	Paving the Top of roof with Solar reflective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three crushed stone sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by the Executive Engineer before use on works)
49	Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard broken stone) using 40 mm gauge hard broken jelly for flooring including laying,consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification. (The rate is inclusive of necessary planking for panellingwherever necessary and as directed by the departmental officers
50	Brick partition walls of 11.50cm thickness using best quality Fly Ash Bricks of size 23 x 11 x 7 cm in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)
51	Foundation and basement
52	Ground floor
53	First Floor
54	Second floor
55	Providing granolithic floor finish of theplain cement concrete 1:2:4 (One Cement, Two crushed stone sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panellingwherever necessary and as directed by the departmental officers)
56	25 mm thick
57	Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and threecrushed stonesand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
58	Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise andsimilar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stonesand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
59	Providing full nosing to the steps or platforms to the granite slab of 20mm thick including neat finishing,polishing ,cost of powder,tools etc. as directed by the departmental officers.Single nosing
60	Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mmof approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)
61	Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three crushed stone Sand)base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)
62	Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)
63	Dadooing walls with following best approved quality, Dadooing with printed design colour glazed tiles of size 300 x 450 x 8mm set in Cement Mortar 1:2 (One Cement and Two crushed stone sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.
64	Supplying and fixing fine polished cuddapah slab of following thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as directed by the departmental officers.
65	38 / 40mm thick
66	Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two crushed stone sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed by the Departmental officers
67	50mm thick slab (using 20mm HBGS Jelly)
68	75 mm thick slab using 20 mmm/c stone jelly
69	Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications
70	Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of \"U\" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.
71	160 mm dia PVC pipe
72	110 mm diaPVC pipe
73	Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place.Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete.
74	Single Leaf
75	Supplying ,fabricating and fixing in position of Stainless Steel (Salem Stainless Steel) Door Frame (Box Section using Stainless Steel Plate of 1 mm thick) of size 100 mm x 60 mm with a rebate of 30 / 35 mm x 15 mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel Hold fast etc.,complete as directed by the departmental officers in all floors.
76	Fabricating supplying and fixing in position M.S Steel framed door with weldmesh and fine wire mesh netting etc. with necessary locking facilities and hinges including cost of red oxide primer etc., complete as directed by the departmental officers.
77	Supplying and fixing solid core particle board flush shutter of nominal thick of 35 mm with necessary T.W. internal lipping conforming to IS 2302 with both sides alround Teak ply 3mm thick including supplying and fixing cost of wind appliances and furniture fittings such as 1no .300x12mm aluminium tower bolt 2nos. 200x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 3 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete as directed by the departmental officers.
78	Single Leaf
79	Double Leaf
80	Supplying and erecting pull and push type rolling shutter Manually operated with ISI make of approved size and section using 18 GI sheet.The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc.,
81	SupplyingandfixingUPVC(Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profilethe size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle.The corners and joints should be welded and cleaned.Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work
82	SupplyingandfixingUPVC(Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profilethe size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles arereinforcedwith GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned.Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work
83	Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames.15mm MS square tubes for top, lock and bottom rails.The steel tubes shall be covered with 5mm thick solid PVC sheets.Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm.The over all size of top rail,Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter. Solid panel PVC door with frame
84	Supplying and fixing PVC sliding door for DifferentlyAbledpersons toilet inwith Solid PVC door shuttersusing 19 Gauge 19mm MS square tubes for styles and outer frames,15mm MS square tubes for top, lock and bottom rails.The steel tubes shall be covered with 5mm thick solid PVC sheets.Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm.The over all size of top rail,Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter including slidng arrangements.
85	Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed atalllevelelevationandheights. Theextrudedsection cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc.The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147.Rate shall included 4mm thick ACP sheet (0.25+ 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer
86	Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mmfromfinishedfloorlevelweldedto38mmdia StainlessSteelpipepostof1.00mmthick asverticalat 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete.The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete
87	Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of25mmdiaof1.60mmthickweldedtotherailing. Thesupports will be groutedinto the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supportingarrangementsthehandrailinfloor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete
88	Supplying and fixing MS Grill for Doors, Windows and Ventilators using required MS angles, flatsetc complete complying with standard specification. The type design for the grills should be got approved by the departmental officers before execution.
89	Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three P-sand), 12mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement and with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers.
90	Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three P-sand), 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement and with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers.
91	Plastering with Cement Mortar 1:5 (One cement and Five P-sand), 12mm thick mixed with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
92	Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three P-Sand) 10mm thick mixed with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers
93	Painting two coats of newly plastered wall surface with ready mixed plastic interior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
94	Painting two coats of newly plastered wall surface with ready mixed plastic Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
95	Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
96	Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
97	Providing Anti-termite treatment to soil adjecent and under building foundation, plinth periphery of the building by application of chemicals of IS 63613 part I to IV in stages to suit the progress of work consist as per the detailed specification as below.Including breaking of termite mounds, making holes with crow bar, closing the holes after the treatment and including cost of chemicals, labour charges, transport and storing etc., complete and as directed by the departmental officers.
98	Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements).The valves to be used on work shall be got approved by the Executive Engineer before use on work.
99	50mm Dia Gun metal Gate Valve
100	40mm Dia Gun metal Gate Valve
101	32mm dia GM gate valve:
102	25mm dia GM gate valve:
103	Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.(Taps should be got approved by the Executive Engineer before use on the works)
104	Cp Screw down tap
105	Swan neck tap
106	Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)
107	Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).
108	Supplying and fixing best approved best quality Procelain CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications.(The soap tray should be got approved by Executive Engineer before use on works).
109	Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works).
110	Supplying and fixing best approved best qualityStainles steelHealth Facetwith Stop coak of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications.(The soap tray should be got approved by Executive Engineer before use on works).
111	Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \"B\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).
112	Supplying and fixing in position best quality approved make white glazed earthernwere sink of size of 600 x 450 x 200mm including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets.[The sink and specials should be got approved by the Executive Engineer before use on works]
113	Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with \"P\" or \"S\" trap conforming to BIS with crushed stone sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers.(The water closet should be got approved by the Executive Engineer before use on works).
114	Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm \"P\" or \"S\" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings.....
115	Supplying and fixing position PVC Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three P-sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)
116	Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers.(The urinal should be got approved by the Executive Engineer before use on works.)
117	White glazed earthernwere lipped mouth flat back urinal
118	Supplying and fixing in position Indian make white glazed earthenware squating type urinal of best quality and approved make including dismantling masonry, if necessary and re-doing the same to original condition, etc., complete complying with standard specification. (The squatting urinal should be got approved by the Executive Engineer before use on works).
119	Supplying and fixing the Incinerator for Ladies Bathroom (For School Works) completeetc.,complying with standard specification.
120	Supplying, laying and jointing glazed stone ware pipes of the following dia of approved quality with spigot and socket ends and fixing them in dry condition using spun yarn and cement including petty masonry shoring and strutting wherever found necessary and laying the pipe line in the alignment at the specified gradient and testing with necessary tools and plants, etc., and re-filling the trench with excavated earth and levelling the ground etc.,complete complying with standard specifications.(Earth work excavation, re-filling with excavated earth will be measured and paid separately).
121	100mm dia stoneware pipe (cement joint)
122	Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications.(The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid Above ground level
123	110mm dia PVC Pipe
124	75mm dia PVC Pipe
125	Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications.(The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level
126	160 mm dia PVC Pipe
127	110 mm Dia PVC Pipe
128	Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).
129	110mm dia PVC Elbow with Door
130	75mm dia PVC Elbow with Door
131	110mm dia PVC Y
132	75mm dia PVC Y
133	110mm dia PVC plain bend
134	75 mm dia PVC plain bend
135	110 mm PVC Tee
136	75 mm PVC Tee
137	Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers
138	Supplying, laying and jointing CPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications.The CPVC pipes shall be got approved by Executive Engineer before use on works. Below ground level.
139	32 mm dia
140	25mm dia
141	Supplying, laying and jointing CPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications.The CPVC pipes shall be got approved by Executive Engineer before use on worksAbove ground level.
142	50 mm dia
143	40 mm dia
144	32 mm dia
145	25 mm dia
146	20mm dia:
147	Supplying CPVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements
148	50mm diaCPVC Elbow
149	40mm diaCPVC Elbow
150	32mm diaCPVC Elbow
151	25mm diaCPVC Elbow
152	20mm diaCPVC Elbow
153	50mm diaCPVC Tee
154	40mm diaCPVC Tee
155	32mm diaCPVC Tee
156	25mm dia CPVC Tee
157	20mm diaCPVC Tee
158	50mm diaCPVC Union
159	40mm diaCPVC Union
160	32mm diaCPVC Union
161	25mm diaCPVC Union
162	20mm diaCPVC Union
163	25mm dia CPVC Bend
164	20mm diaCPVC Bend
165	Manufacturing, supplying and fixing of Teakwood ornamental Entrance door of size 1.80x2.40m with the following specification. The outer frame of ornamental Entrance Door of size 150x100mm.Teak wood scantling.The door consists of openable area 1.60x2.20m with Double leaf. The each openable shutter consists of Top Panel for 1.50m.height and bottom vertical pannel in for a height of 90cm. The Shutter bottomrail is of 200x50mm.size and middle, top and side rails are of size 150x50mm.with corner designed beading works.The shutter pannel is of 40mm. thick T.W.planks with special curving works.The outer frames corners are designed border works single side for entrance outer frame and on both sides for middle frame..The cost includes all kinds of furniture fittings, such as Brass Aldrop, Brass tower bolt, brass hinges, brass door stopper, brass handles.All the members are finshed with two coats of melamine polish outer the priming coat.
166	Supplying and laying of Interlocking Paver Block Stone 60mm thk. Over a base layer of sand filling incl. Cost of materials laying and Labour charges etc.,
167	Manufacturing, supplying and fixing of cupboard shutter using country wood (kongu) frame of 100 m x 32 mm thick for outer frame horizontal and vertical memebers. The shutter frame of size 75 x 32 mm of country wood scantling (Horizontal 3 nos., Vertical 2 nos., of reach shutter) with 12 mm thick both side prelaminated particle board (exterior grade) shutter.The shutter are fixed to the frame with requied 6 nos., o alumium hings 100 x 30 mm 2 nos., \"D\" type alumium hadle 100 mm 2 nos., of aluminum tower bolts 75 x 10 mm 2 nos., of cupboard lock etc., the country wood frame shall be painted two coats with synthetic enamel paint over one coat of wood primer. The prelaminated particle board and furniture fittings used should be got approved by the Executive Engineer before use on works. The cost is inclusive of alumnum handle. tower bolts, piano type hingers, screws, nails, and required further fittings and painting the frame and inner side of prelaminate shutter etc., complete complying with standard specification.
168	Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition. The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.5mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes inRCC column,masonrywherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing as directed by the departmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineerbefore use.
169	Fabricating Supplying and fixing in position of Aluminium anodised Powder Coated of single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319kg/m and Shutter frame made ofsection Vertical & Top rail: [email protected] kg/m and Bottom rail: 100x44.45x2.50mm@ 1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/m,Alu. Clips: 17.15x17.27x1.50mm @ 0.176 kg/m,Alu. Handle: 100x30mm @ 0.988 kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - 1 Nos., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 1No ., lock-1No., Door stopper with rubber bushincluding cost of materials labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete.All the Alu. Section are to be anodised with matt finish under electricaly controlled conditions in accordance with IS 1868/1962 for an average anatic film thickness of 15 microns etc., complete.Aluminium sections,and furniture fittings shall be got approved by the Executive Engineer incharge.
170	Supplying, fabricating, erecting and fixing Hilux (or) equivalent board false ceiling upto a ceiling height of 4.5m from floor level.etc complete with standard specification and as directed by the Departmental officers
171	Providing Cornice Work for Gyp Board False Ceiling etc complete with standard specification and as directed by the Departmental officers
172	Providing and fixing Acoustic wall Panelling (equivalent ot Armstrong ) in channelled wood works perforated panels of width 192mm, thickness of 15mm and length of 2400mm or as per required by the Departmental Engineer made of a high density fibre board with minimum 725 kg./m3 density substrate with a laminated facing as per the approved shade and finish and a melamine balancing layer on the reverse side. The boards shall have a special peforation pattern where the visible surface has a \"Helmholtz\"fluted perforation of 3mm width and 21mm of visible panel each. The edges of the panels shall be \"tongue\" and grooved\"to receive special clips for installation. The back of the perforated panel shall have sound absorbing not woven acoustical fleese having NRC of 0.52. The panels shall be mounted on special aluminium splines using clips provided by Armstrong and approved by the Engineer-in-Charge
173	Providing Polymer Coating (Water Proof Coating) for sunken Portion of toilet with following specification and the surface shall be cleaned to remove all dust, foreign, matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier. The mix shall be stirred throughly until no bubbles remain in the mix. Any lumps found in mix shall be removed. Apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat as directed by the departmental officers etc. The rate inclusive of cost of materials and labour, etc., complete.
174	Providing expansion joint 12.5mm width in RCC roof slabs between RCC twin beams using PVC water bar of 150mm wide centre bulb of 4mm to 6mm thickness of approved quality and brand and including filling the inner space with suitable non-absorbent flexible and well compressible filler materials of approved quality and covering the top surface with GI sheet 30cm wide and 1.6mm thick using phill plugs, GI screws, limpet cup washers, bitumen washers, etc., complete complying with standard specifications and as directed
175	Providing expansion joint in RCC floor slab for 12.5mm width using polysulphide as sealent on the top and bottom for a depth of 7.5mm each and packing the inner space using compressible non-absorbent filler materials including cost of labour for cutting and fixing filler materials and laying polysulphide sealent with necessary spatula etc., complete complying with standard specifications and as directed
176	Providing expansion joint of 12.5mm wide in between RCC twin columns from top of pedastal to full height including filling the inner space with suitable non-absorbent, flexible and well compressible filler materials of approved quality and brand; finishing the sides of RCC columns with polysulphide sealents for a depth of 7.5mm on either side covering the inner space filled with filler materials as above etc., complete complying with standard specifications and as directed.
177	Supplying and Fixingin position of PVC water storage tank of best approved quality and brand of super thick with the 1000 litres capacity with acessories includinggiving necessory connections etc complete.
178	Supplying and erecting in position of following 500 liters capacity Industrial Model Reverse Osmosis Water-cum- Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No. Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact
179	Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five crushed stone sand] using best quality of second class Table Mould Bricks of size 9\" x 43/8\" x 23/4\" with Plastering with Cement Mortar 1:3 [One Cement and Three P-Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification.
180	Supplying and laying of 600mm dia RCC Hume Pipe including all accessories and as directed by the departmental officers etc complete
181	Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 150mm dia and then enlarging to required dia direct or reverse Specialrotary mud circulation method using rotary Specifications rigs, fuel, labour and drilling bentonite and water required for drilling at site(Site will be shown by the TWAD Board Officers) including construction of mud pit.
182	Up to 60M depth below ground level
183	From 60m - 90m Depth ending below ground level
184	From 90 m upto 120 m Depth ending from ground level
185	From 120 m upto 150 m Depth ending from ground level
186	Reaming 150 mm dia pilot bore to 300mm dia bore as directed by the TWAD Board Officers.
187	Up to 60M depth below ground level
188	From 60m - 90m Depth ending below ground level
189	From 90 m upto 120 m Depth ending from ground level
190	From 120 m upto 150 m Depth ending from ground level
191	Supplying and fixing PVCcasing pipes of 150mm dia vertical10Kg/Cm2 in sedimentarydepth asdirected by the departmental officers etc., complete.
192	150mm dia PVC plain pipe
193	150 mm PVC pipe with slotted
194	Labour charges for inseting casingpipesassemble (with slots and without slots)in the drilled holds including weldingthe joints etc. complete and supplyingand placing ofthe angular with pebbles of size and quality as approved by the E.E., PWD.,
195	Charges for developing the borewell with air compressor of 300 CFM capacity (Minimum 8 Hours) including transportation labour and fuel charges for compressor as directed by TWAD Board Officers and conducting yield test by ‘V’ notch method.
196	Bore cap 150mm dia size using M.S. Flat of size 1 cm x 3 mm and M.S. sheet on top with bolting arrangements for securing the cap in position (Bore caps with M.S. Couplings need not be made)
197	Supplying and fixing of 32mm dia HDPE pipes for sub mersible pump in bore well class-5 1Mpa or 10 kg. / cm2 pressure)
198	Supply of 2.5 sq.mm. three core flat copper cable for submercible motor pump with wire bounded punched copper conductor insulated and sheathed with PVC with voitage grate upto 1100v confirming to and marked with is (694-1990) complying with standrad etc., complete
199	Supplying and fixing of 2.00 HP Submerssible motorwith ISI Mark 14 stage with pump
200	Supply and fixing of panel board item for the following motor pump with fully automatic starter phase preventor,on & off switch indicator lamp, volta meter and ammeter with selector switch with suitablepower capacity arranded in a steel sheet box as directed by the deparmental office ect.,complete
201	Supplying and fixing Nylon Rope for Bore-well andas directed by the department officers.
202	Supplying and Fixing of 1.00 Hp Mono blockmotor including all accessories as directed by the departmental officers etc complete
203	Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wireconnection of 14 SWG TC wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point(5 points / Coil) (Higher End)
204	Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point(6 points / Coil) (Higher End)
205	Wiring with 3 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point . (Higher End)
206	Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point ( 8 points / Coil). Higher End
207	Supply and fixing of single box type 4\"-20 W LED fitting (Philips / Havells / Eq) with CRCA body complete with TW round blocks on wall or ceiling with 20 W LED tube with PVC unsheathed Copper leads from terminals to the fitting.
208	Supply and fixing of 1200mm (48\") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher End) with 300 mm down rod on the existing fan clamp.
209	Supply and fixing of 16\"(400 mm)wall mounting fan (Orient Electric Wall-49) with remote with suitable clamps and necessary conections complete.
210	Supply and fixing of 24W TRIM CLIPON LED (Havells make / Eq) Recess Cum surface mounting squaretype fitting of cool white outputwith integral driver and necessary connections complete.
211	Supply and fixing of square type recessed 2\" x 2\" 36W LED luminaire (Philips / Havells / Eq) on false ceiling with steel chain and PVC unsheathead copper leads from terminals to the fitting.
212	Supply and fixing of Twin box type 4\"- 20W LED fitting (Philips / Havells / Eq) with CRCA body complete with conduit pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with 2 nos of 20W LED tubes.
213	Supply and fixing of 300 mm (12\") sweep (light duty) AC exhaust fan complete without provision of hole in the wall.
214	Supply and fixing of louvers shutters arrangements for 300mm (12”) sweep (light duty) AC Exhaust fan.
215	Supply and fixing of 9W LED lamp (Havells / Eq) in existing BH point.
216	Supply and fixing of WT bulk head fitting with guard suitable for 9W LED lamp(Havells /Eq) with lamp.
217	Supply and fixing of 70W LED street light fitting with LED (Havells / Eq) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting.
218	Supply & Fixing of AC / DC 76mm Buzzer /call bell suitable for 230 Volts 50 c/s single phase AC supply on suitable TW round block with1 Module GI flush mounting box, 1 Module combined plastic cover plate and 1 module Modular type Bell push Switch with indicator complete (The GI flush mounting box,cover plate and switch should be ofLegrand/ Hager/ Crabtree/ Equilvalent).
219	Supply and fixing of 25 litres capacity 1000W automatic electric water heater with copper container with glass wool / Puf insulation with MS powder coated shell (VENUS/RACOLD) with ISI mark suitable for 230V 50 c/s AC supply on suitableMS clamps with 3 core flex wire but without plumbing work.
220	Supply and fixing of 3nos.6A two module 5 pin socket, 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. (Higher End)
221	Supply and fixing of 1 no.6/16A two module socket, 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. (Higher End)
222	Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug) (Legrand/ Hager make)
223	Supply and fixing of 32A DP MCB in sheet enclosure in flush with wall with earth connection. (The MCB and metal enclosure should be with Legrand/ Hager make).
224	Supply and fixing of 63A FP MCB in sheet enclosure in flush with wall with earth connection. (The MCB and metal enclosure should be with Legrand/ Hager make). (For Ductable AC unit and UPS input and output)
225	Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with IP 42 protection with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. (Higher End)
226	Supply and fixing of 7 segment 4 way triple pole neutral MCB distribution boardin sheet steel enclosure double door type with metal door with IP 43 - IK 09protection with 40A 4 pole MCB as incoming and 3Nos 40A DP RCCB as sub incomer and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. (The MCBDB andMCB\"s should be with Legrand / Hager make)
227	Supply and fixing of 7 segment 4 way triple pole neutral MCB distribution boardin sheet steel enclosure double door type with metal door with IP 43 - IK 09protection with 63A 4 pole MCB as incoming and 3Nos 63A DP RCCB as sub incomer and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. (The MCBDB andMCB\"s should be with Legrand / Hager make)
228	Supply and fixing of 7 segment 4 way triple pole neutral MCB distribution boardin sheet steel enclosure double door type with metal door with IP 43 - IK 09protection with 100A 4 pole MCB as incoming and 3Nos 100A DP RCCB as sub incomer and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. (The MCBDB andMCB\"s should be with Legrand / Hager make) (AC Plug )
229	Supply and fixing of Vertical type 4 way triple pole neutral MCB distribution boardin sheet steel enclosure double door type with metal door with IP 43 - IK 09 protection with 100A 4 pole MCB as incoming and 4Nos 63A TP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. (The MCBDB andMCB\"s should be with Legrand / Hager make)
230	Supply and fixing of Vertical type 4 way triple pole neutral MCCB distribution boardin sheet steel enclosure double door type with metal door with IP 43 - IK 09 protection with 125A 4 pole MCCB as incoming and 4Nos 63A TP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. (The MCCBDB andMCB\"s should be with Legrand / Hager make) (Auditorium)
231	Supply and run of 2 of 1.5sq.mm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling making good of the concealed portion with suitable colour.
232	Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade insuitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour.
233	Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour.
234	Supply and run of 4 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable colour.
235	Supply and Run of 4 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour.
236	Supply and run of 4 x 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 32mm dia GI pipe (Class \"B\") suitably bent at both ends with necessary angle iron up right and end supports for mains
237	Supply and run of 4 x 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains.
238	Desgin, Fabrication, Supply, testing and commissioningof800 Amps cubical panel floor mounting type dust and vermin proof MV panel boardof size 14\" x 7\" x3\" made up of 18 SWG CRCA sheet steel rated for 433 V, 50 HZ AC supply as per the CEIG guidelines and latest IE rules comprising the following:
239	Main Busbar:- 2 runs of 2\" x 1/4\" copper flat for 3 phases and 1 run of 1\" x 1/4\" copper flat for neutral.
240	EB Incomer: 800A,4 pole, 433V 50kA Thermal magnetic based MDO Air Circuit Breaker with protection and interlock arrangements as per relevant IS with latest amendments - 2 Nos (L&T/Siemens make)
241	Buscoupler: 800A,4 pole, 433V switch with interlock arrangements as per relevant IS with latest amendments - 1 No (L&T/Siemens make)
242	1. Manual trip push button - 3Nos
243	2. Mechanical ON/OFF indicator - 3Nos
244	3. Vertical Terminal Adaptors - 9Nos 4. LED indicating lamp-9 Nos
245	5. Under Voltage Releasefor 433 volts AC - 2Nos
246	6. No/NC auxiliary contacts-2sets
247	7. CTs suitable for metering - 2 sets
248	8. Digital demand controller- 2Nos
249	9. Earth Fault Release Type EF1 (10%, 20% In ) - 2Nos
250	10. Over current relay - 2Nos
251	11. Shunt Release for 433 volts AC - 2Nos
252	12.suitable capacity fuse controls for the systems - 2sets 13. 3 lock 2 key arrangements14. Multifunction meter - 2 nos to display phase voltages, Line voltages, Power factor, Phase current, frequency
253	Separate mould base for each pole for easy maintenance, all relevant protection, accessories, as per CEIG IE rules in force, with interconnection and terminations and required.
254	Outgoing switches:1. 400Amps TPN interior switch fuse disconnector with HRC fuse double break -4 Nos (L&T / Siemens make)
255	2. 200Amps TPN interior switch fuse disconnector with HRC fuse double break - 4 Nos (L&T / Siemens make)
256	The following tinned Cu flat should be used between busbar and switches: 2\"x1/2\" tinned cu. Flat for interconnection of 2 Nos 800A FP incoming ACB & 1no 800A FP switch buscoupler and 2\"x1/4\" tinned cu. Flat for interconnection of 4 Nos 400A TPN outgoing switches & 1\"x1/4\" tinned cu. Flat for interconnection of 4 Nos 200A TPN Outgoing switches. The EB supply feeder are to provide with digital multifunction meter with CT, RYB indicator lamp and control fuses switches S&F of danger borad all switches and the ACB\"s should be given double earth connection by runs of 25x3mm copper flat and two numbers 25 x 3 copper earth bus must be run around the panel as per IE rules.
257	All live parts of the bus switches etc are to be shrouded with suitable 6mm thick hylum sheet and SMC support insulators should be with maximum creep age distance as per IE rules.All the out going feeder, bus bars should be extended for easy termination of LTUG cable and suitable removable type gland.All the copper flats inside the panel should be provided with heat shrinkable sleeves and lead coating in the termination points.
258	The cubical panel should be mounted over the MS channel of size 3\" x1 1/2\" x 1/2\".The cubical panel should be painted with anti corrosive red oxide and with powder coated epoxy paint. The capacity of the switch, cable direction, place of feeding shall be indicated clearly in all theswitches. The operation and maintenance manual for the metering instruments and the AB switches shall be handed over to the department without fail.
259	Supply, fabrication, erection and comissioning of 400A capacity dust and vermin proof cubical panel board size of 7\"X 1\" X 5.5\"made up of 16 SWG CRCA sheet steel for outer body, with doors, switch supports and seperations etc., and with supply and fixing of the following interiorswitch with bus bar chamber complete with
260	1\" x 1/2\" tinned cu. Flat for 3 phase, 1 \" x 1/4\" tinned cu flat forneutral, 1\" x 1/8\" tinned cu flat forearth connectionswith bus bar insulators. The following tinned Cu flat should be used for interconnection between busbar and switches:1\" x 1/2\" tinned cu. Flat for interconnection of 1No 400A incoming switch to bus bar, 1\" x 1/8\" tinned cu. Flat for interconnection of 6 Nos 125A Outgoing switches to bus bar, andno.8 SWG Copper conductort for interconnection of 6 Nos 63A outgoing Switches to bus bar.
261	A separate chamber on top of one side should be provided with multi function meter to display Line & Phase Voltage, Phase Current, Power Factor and Frequency with one set of LED pilot lamp, fuse holder with suitable HRC fuse for each phase with suitable CT coil arrangements. The panel should be fabricated as per relevant IE rules & CEIG specification for accommodation of 13 Nos 3 phase switches and supply & fixing of the following switches.
262	1.400 A TPNswitch disconnector fuse units interior only with HRC fuses double break - 1No2. 125A TPNswitch disconnector fuse units interior only with HRC fuses double break - 6Nos3. 63A TPNswitch disconnector fuse units interior only with HRC fuses double break - 6Nos
263	In each cubical switch, live portion of bus bar should be shrouded by 6mm thick hylum sheet separators, and properly earthed by tinned solid copper flat as I.E rules CEIG sepecifications.The earth bus with two runs of 1\" x 1/8\" tinned copper flat must be run all round the panel to provide double earth connection. The panel should be painted withtwo high quality enamel paint over one coat of red oxide primer, the cable size, capacity of switch, location etc., should be marked with white paint and 2 Nos. metallic danger board affixed complete with mounting on base channel 3\"x1½\"x½\" iron frame work support complete. (The TPN switches should be L&T / Siemens make only) (Auditorium power)
264	Supply, fabrication, erection and comissioning of 400A capacity dust and vermin proof cubical panel board size of 5\"X 1\" X 5.5\"made up of 16 SWG CRCA sheet steel for outer body, with doors, switch supports and seperations etc., and with supply and fixing of the following interiorswitch with bus bar chamber complete
265	with 1\" x 1/2\" tinned cu. Flat for 3 phase, 1 \" x 1/4\" tinned cu flat forneutral, 1\" x 1/8\" tinned cu flat forearth connectionswith bus bar insulators. The following tinned Cu flat should be used for interconnection between busbar and switches:1\" x 1/2\" tinned cu. Flat for interconnection of 1No 400A incoming switch to bus bar,1 1/4\" x 1/4\" tinned cu. Flat for interconnection of 1 No 315A Outgoing switches to bus bar, 1\" x 1/4\" tinned cu. Flat for interconnection of 3 Nos 200A Outgoing switches to bus bar and 1\" x 1/8\" tinned cu. Flat for interconnection of 2 Nos 100A Outgoing switches to bus bar.
266	A separate chamber on top of one side should be provided with multi function meter to display Line & Phase Voltage, Phase Current, Power Factor and Frequency with one set of LED pilot lamp, fuse holder with suitable HRC fuse for each phase with suitable CT coil arrangements. The panel should be fabricated as per relevant IE rules & CEIG specification for accommodation of 7 Nos 3 phase switches and supply & fixing of the following switches.
267	1.400 A TPNswitch disconnector fuse units interior only with HRC fuses double break - 1No2. 315A TPNswitch disconnector fuse units interior only with HRC fuses double break - 1Nos 3. 200A TPNswitch disconnector fuse units interior only with HRC fuses double break - 3Nos4. 100A TPNswitch disconnector fuse units interior only with HRC fuses double break - 2Nos
268	In each cubical switch, live portion of bus bar should be shrouded by 6mm thick hylum sheet separators, and properly earthed by tinned solid copper flat as I.E rules CEIG sepecifications.The earth bus with two runs of 1\" x 1/8\" tinned copper flat must be run all round the panel to provide double earth connection. The panel should be painted withtwo high quality enamel paint over one coat of red oxide primer, the cable size, capacity of switch, location etc., should be marked with white paint and 2 Nos. metallic danger board affixed complete with mounting on base channel 3\"x1½\"x½\" iron frame work support complete. (The TPN switches should be L&T / Siemens make only) (Admin total power)
269	Supply, fabrication, erection and comissioning of 400A capacity dust and vermin proof cubical panel board size of 6\"X 1\" X 5.5\"made up of 16 SWG CRCA sheet steel for outer body, with doors, switch supports and seperations etc., and with supply and fixing of the following interiorswitch with bus bar chamber complete
270	with 1\" x 1/2\" tinned cu. Flat for 3 phase, 1 \" x 1/4\" tinned cu flat forneutral, 1\" x 1/8\" tinned cu flat forearth connectionswith bus bar insulators. The following tinned Cu flat should be used for interconnection between busbar and switches:1\" x 1/2\" tinned cu. Flat for interconnection of 1No 400A incoming switch to bus bar,1\" x 1/4\" tinned cu. Flat for interconnection of 4 Nos 200A Outgoing switches to bus bar, 1\" x 1/8\" tinned cu. Flat for interconnection of 2 Nos 125A Outgoing switches to bus bar and no.8 SWG copper conductor for interconnection of 2 Nos 63A Outgoing switches to bus bar.
271	A separate chamber on top of one side should be provided with multi function meter to display Line & Phase Voltage, Phase Current, Power Factor and Frequency with one set of LED pilot lamp, fuse holder with suitable HRC fuse for each phase with suitable CT coil arrangements. The panel should be fabricated as per relevant IE rules & CEIG specification for accommodation of 9 Nos 3 phase switches and supply & fixing of the following switches.
272	1.400 A TPNswitch disconnector fuse units interior only with HRC fuses double break - 1No2. 200A TPNswitch disconnector fuse units interior only with HRC fuses double break - 4Nos 3.125A TPNswitch disconnector fuse units interior only with HRC fuses double break - 2Nos4. 63A TPNswitch disconnector fuse units interior only with HRC fuses double break - 2Nos
273	In each cubical switch, live portion of bus bar should be shrouded by 6mm thick hylum sheet separators, and properly earthed by tinned solid copper flat as I.E rules CEIG sepecifications.The earth bus with two runs of 1\" x 1/8\" tinned copper flat must be run all round the panel to provide double earth connection. The panel should be painted withtwo high quality enamel paint over one coat of red oxide primer, the cable size, capacity of switch, location etc., should be marked with white paint and 2 Nos. metallic danger board affixed complete with mounting on base channel 3\"x1½\"x½\" iron frame work support complete. (The TPN switches should be L&T / Siemens make only) (250kVA Genset panel)
274	Supply, fabrication, erection and comissioning of 315A capacity dust and vermin proof cubical panel board size of 7\"X 1\" X 5\"made up of 16 SWG CRCA sheet steel for outer body, with doors, switch supports and seperations etc., and with supply and fixing of the following interiorswitch with bus bar chamber complete with
275	1 1/4\" x 1/4\" tinned cu. Flat for 3 phase, 1 \" x 1/4\" tinned cu flat forneutral, 1\" x 1/8\" tinned cu flat forearth connectionswith bus bar insulators. The following tinned Cu flat should be used for interconnection between busbar and switches:1 1/4\" x 1/4\" tinned cu. Flat for interconnection of 1No 315A incoming switch to bus bar, 1\" x 1/8\" tinned cu. Flat for interconnection of 5 Nos 100A Outgoing switches to bus bar, and , no.8 SWG Copper conductort for interconnection of 7 Nos 63A outgoing Switches to bus bar.
276	A separate chamber on top of one side should be provided with multi function meter to display Line & Phase Voltage, Phase Current, Power Factor and Frequency with one set of LED pilot lamp, fuse holder with suitable HRC fuse for each phase with suitable CT coil arrangements. The panel should be fabricated as per relevant IE rules & CEIG specification for accommodation of 13 Nos 3 phase switches and supply & fixing of the following switches.
277	1.315 A TPNswitch disconnector fuse units interior only with HRC fuses double break - 1No2. 100A TPNswitch disconnector fuse units interior only with HRC fuses double break - 5Nos3. 63A TPNswitch disconnector fuse units interior only with HRC fuses double break - 7Nos
278	In each cubical switch, live portion of bus bar should be shrouded by 6mm thick hylum sheet separators, and properly earthed by tinned solid copper flat as I.E rules CEIG sepecifications.The earth bus with two runs of 1\" x 1/8\" tinned copper flat must be run all round the panel to provide double earth connection. The panel should be painted withtwo high quality enamel paint over one coat of red oxide primer, the cable size, capacity of switch, location etc., should be marked with white paint and 2 Nos. metallic danger board affixed complete with mounting on base channel 3\"x1½\"x½\" iron frame work support complete. (The TPN switches should be L&T / Siemens make only) (Admin GF power)
279	Supply, fabrication, erection and comissioning of 200A capacity dust and vermin proof cubical panel board size of 5\"X 1\" X 4.5\"made up of 16 SWG CRCA sheet steel for outer body, with doors, switch supports and seperations etc., and with supply and fixing of the following interiorswitch with bus bar chamber complete with
280	1\" x 1/4\" tinned cu. Flat for 3 phase, 1\" x 1/8\" tinned cu flat forneutral, 1\" x 1/8\" tinned cu flat forearth connectionswith bus bar insulators. The following tinned Cu flat should be used for interconnection between busbar and switches: 1\" x 1/4\" tinned cu. Flat for interconnection of 1No 200A incoming switch to bus bar and no.8 SWG copper conductor for interconnection of 10 Nos 63A Outgoing switches to bus bar.
281	A separate chamber on top of one side should be provided with multi function meter to display Line & Phase Voltage, Phase Current, Power Factor and Frequency with one set of LED pilot lamp, fuse holder with suitable HRC fuse for each phase with suitable CT coil arrangements. The panel should be fabricated as per relevant IE rules & CEIG specification for accommodation of 11 Nos 3 phase switches and supply & fixing of the following switches.
282	1.200A TPNswitch disconnector fuse units interior only with HRC fuses double break - 1No2. 63A TPNswitch disconnector fuse units interior only with HRC fuses double break - 10Nos
283	In each cubical switch, live portion of bus bar should be shrouded by 6mm thick hylum sheet separators, and properly earthed by tinned solid copper flat as I.E rules CEIG sepecifications. The earth bus with two runs of 1\" x 1/8\"tinned copper flat must be run all round the panel to provide double earth connection. The panel should be painted withtwo high quality enamel paint over one coat of red oxide primer, the cable size, capacity of switch, location etc., should be marked with white paint and 2 Nos. metallic danger board affixed complete with mounting on base channel 3\"x1½\"x½\" iron frame work support complete. (The TPN switches should be L&T / Siemens make only) (Admin Lighting & 2F power)
284	Supply, fabrication, erection and comissioning of 200A capacity dust and vermin proof cubical panel board size of 5\"X 1\" X 4.5\"made up of 16 SWG CRCA sheet steel for outer body, with doors, switch supports and seperations etc., and with supply and fixing of the following interiorswitch with bus bar chamber complete with
285	1\" x 1/4\" tinned cu. Flat for 3 phase, 1\" x 1/8\" tinned cu flat forneutral, 1\" x 1/8\" tinned cu flat forearth connectionswith bus bar insulators. The following tinned Cu flat should be used for interconnection between busbar and switches: 1\" x 1/4\" tinned cu. Flat for interconnection of 1No 200A incoming switch to bus bar, 1\" x 1/8\" tinned cu. Flat for interconnection of 3 Nos 100A Outgoing switches to bus bar, no.8 SWG copper conductor for interconnection of 5 Nos 63A outgoing Switches to bus bar.
286	A separate chamber on top of one side should be provided with multi function meter to display Line & Phase Voltage, Phase Current, Power Factor and Frequency with one set of LED pilot lamp, fuse holder with suitable HRC fuse for each phase with suitable CT coil arrangements. The panel should be fabricated as per relevant IE rules & CEIG specification for accommodation of 9 Nos 3 phase switches and supply & fixing of the following switches.
287	1.200A TPNswitch disconnector fuse units interior only with HRC fuses double break - 1No2. 100A TPNswitch disconnector fuse units interior only with HRC fuses double break - 3Nos3. 63A TPNswitch disconnector fuse units interior only with HRC fuses double break - 5Nos
288	In each cubical switch, live portion of bus bar should be shrouded by 6mm thick hylum sheet separators, and properly earthed by tinned solid copper flat as I.E rules CEIG sepecifications. The earth bus with two runs of 1\" x 1/8\"tinned copper flat must be run all round the panel to provide double earth connection. The panel should be painted withtwo high quality enamel paint over one coat of red oxide primer, the cable size, capacity of switch, location etc., should be marked with white paint and 2 Nos. metallic danger board affixed complete with mounting on base channel 3\"x1½\"x½\" iron frame work support complete. (The TPN switches should be L&T / Siemens make only) (Admin 1F power)
289	Supply, fabrication, erection and comissioning of 200A capacity dust and vermin proof cubical panel board size of 5\"X 1\" X 5.5\"made up of 16 SWG CRCA sheet steel for outer body, with doors, switch supports and seperations etc., and with supply and fixing of the following interiorswitch with bus bar chamber complete with
290	1\" x 1/4\" tinned cu. Flat for 3 phase, 1 \" x 1/8\" tinned cu flat forneutral, 1\" x 1/8\" tinned cu flat forearth connectionswith bus bar insulators. The following tinned Cu flat should be used for interconnection between busbar and switches:1\" x 1/4\" tinned cu. Flat for interconnection of 1No 200A incoming switch to bus bar, 1\" x 1/8\" tinned cu. Flat for interconnection of 4 Nos 125A Outgoing switches to bus bar, andno.8 SWG Copper conductort for interconnection of 4 Nos 63A outgoing Switches to bus bar.
291	A separate chamber on top of one side should be provided with multi function meter to display Line & Phase Voltage, Phase Current, Power Factor and Frequency with one set of LED pilot lamp, fuse holder with suitable HRC fuse for each phase with suitable CT coil arrangements. The panel should be fabricated as per relevant IE rules & CEIG specification for accommodation of 9 Nos 3 phase switches and supply & fixing of the following switches.
292	1.200 A TPNswitch disconnector fuse units interior only with HRC fuses double break - 1No2. 125A TPNswitch disconnector fuse units interior only with HRC fuses double break - 6Nos3. 63A TPNswitch disconnector fuse units interior only with HRC fuses double break - 6Nos
293	In each cubical switch, live portion of bus bar should be shrouded by 6mm thick hylum sheet separators, and properly earthed by tinned solid copper flat as I.E rules CEIG sepecifications.The earth bus with two runs of 1\" x 1/8\" tinned copper flat must be run all round the panel to provide double earth connection. The panel should be painted withtwo high quality enamel paint over one coat of red oxide primer, the cable size, capacity of switch, location etc., should be marked with white paint and 2 Nos. metallic danger board affixed complete with mounting on base channel 3\"x1½\"x½\" iron frame work support complete. (The TPN switches should be L&T / Siemens make only) (Boys & Girls Hostel panel)
294	Supply and laying of 2 x 16 sq.mm PVC aluminium armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering three sides of the cable completely with bricks and sand and refilling the earth to make good.
295	Supply and clamping of 2 x 16 sq.mm. PVC aluminium LTUG armoured cable on post or on wall with MS clamps.
296	Supply and fixing of brass cable gland for 2x16 sq.mm PVC aluminium LTUG armoured cable with earth connection.
297	Supply and laying of 4 x 16 sq.mm PVC aluminium armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering three sides of the cable completely with bricks and sand and refilling the earth to make good.
298	Supply and clamping of 4 x 16 sq.mm. PVC aluminium LTUG armoured cable on post or on wall with MS clamps.
299	Supply and clamping of 3-1/2 x 35sq.mm. PVC aluminium LTUG armoured cable on post or on wall with MS clamps. (for 63A Switch)
300	Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC aluminium armoured LTUG cable with earth connection. (for 63A Switch)
301	Supply and providing cable end termination of 3-1/2 x 35 sq.mm. PVC aluminium LTUGarmoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.(for 63A Switch)
302	Supply and laying of 3-1/2 x 50 sq.mm. PVC aluminium LTUG armouredcable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering three sides of the cable completely with bricks and sand and refilling the earth to make good.(for 63A Switch)
303	Supply and clamping of 3-1/2 x 50sq.mm. PVC aluminium LTUG armoured cable on post or on wall with MS clamps. (for 63A Switch)
304	Supply and fixing of brass cable gland for 3-1/2 x 50 sq.mm. PVC aluminium armoured LTUG cable with earth connection. (for 63A Switch)
305	Supply and providing cable end termination of 3-1/2 x 50 sq.mm. PVC aluminium LTUGarmoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.(for 63A Switch)
306	Supply and clamping of 3-1/2 x 70sq.mm. PVC aluminium LTUG armoured cable on post or on wall with MS clamps. (for 63A Switch)
307	Supply and fixing of brass cable gland for 3-1/2 x 70 sq.mm. PVC aluminium armoured LTUG cable with earth connection. (for 63A Switch)
308	Supply and providing cable end termination of 3-1/2 x 70 sq.mm. PVC aluminium LTUGarmoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.(for 63A Switch)
309	Supply and laying of 3 1/2 x 185 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering three sides of the cable completely with bricks and sand and refilling the earth to make good.
310	Supply and clamping of 3 1/2 x 185 sq.mm PVC aluminium armoured LTUG cable on post or on wall with MS Clamps. (For LTCT Service and main switch)
311	Supply and laying of 2 Runs 3 1/2 x 185 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering three sides of the cable completely with bricks and sand and refilling the earth to make good.
312	Supply and clamping of 2 Runs 3 1/2 x 185sq.mm PVC aluminium armoured LTUG cable on post or on wall with MS Clamps.
313	Supply and fixing of brass cable gland for 3 1/2 x 185 sqmm PVC aluminium armoured LTUG cable with earth connection.
314	Supply and providing cable end termination of 3 1/2 x 185 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.(SD-242)
315	Supply and clamping of 3 1/2 x 240 sq.mm PVC aluminium armoured LTUG cable on post or on wall with MS Clamps. (For LTCT Service and main switch) (SD-230)
316	Supply and fixing of brass cable gland for 3 1/2 x 240 sqmm PVC aluminium armoured LTUG cable with earth connection.(SD-194)
317	Supply and providing cable end termination of 3 1/2 x 240 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.(DATA-29)
318	Supply and fixing of 200 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only.
319	Earthing as per the ISI specification with an earth electrode of 2.1mt class \"B\" GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.
320	Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class \"B\" GI pipe of dia not less than 32mm complete with necessary masonry work.
321	Supply and run of No-8 SWG Copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection.
322	Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection.
323	Supply and run of 25mm x 6mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection.
324	Supply erection, testing and commissioning of 1.5 TR (4500 K.cal/Hr) ABS Plastic Split type Inverter Air conditioner conforming to IS 1391 (Part-2) 1992 with Amdt No. 1 to 2 fitted with inverter compressor operating on refrigerant of non CFC suitable for wall mounting for operation on 230V, 50HZ single phase AC supply with5 star rating as per BEE specification and capable of performing the functions
325	1) Cooling
326	2) Dehumidifying
327	3) Air circulating
328	4) Filtering
329	The installation work for the above split type AC units inculds the following
330	1.Mounting /fitting indoor and outdoor units at their respective locations.
331	2.Laying copper refrigerant pipeof 0.8mm thick of required length connection not exceeding 4 meters distance and both units after drilling hole/holes in the wall ifrequired.
332	3.Insulating the suction pipe with expanded polyethylene foam 5mm tubing.
333	4.Laying 20mm dia flexible PVC drain pipe to throw out the condensate water being formed within the indoor unit.
334	5.Leakage testing the entire system gas in the unit.
335	6.Charging refrigerant gas in the unit.
336	7.Suitable electric wiring to be provided with 2.5 sqmm PVC insulated copper wire between indoor units upto 6 mtrs length and up to switch with in 3 meters of the location of indoor unit.(Carrier / Bluestar / O-General / Daikin make)
337	Supply and installation of 4 kVA Electronic Automatic Voltage Stabilizer V- GUARD makeVND 500 Model with Input Voltage range of150Volt - 285Volt and Output Voltage range 200Volts to 230 Volts with High and Low Voltage cut off and 3 minutes time delay relay with demonstration.
338	Supply erection, testing and commissioning of 2.0 TR (6000 K.cal/Hr) ABS Plastic Split type Inverter Air conditioner conforming to IS 1391 (Part-2) 1992 with Amdt No. 1 to 2 fitted with inverter compressor operating on refrigerant of non CFC suitable for wall mounting for operation on 230V, 50HZ single phase AC supply with5 star rating as per BEE specification and capable of performing the functions
339	1) Cooling
340	2) Dehumidifying
341	3) Air circulating
342	4) Filtering
343	The installation work for the above split type AC units inculds the following
344	1.Mounting /fitting indoor and outdoor units at their respective locations.
345	2.Laying copper refrigerant pipeof 0.8mm thick of required length connection not exceeding 4 meters distance and both units after drilling hole/holes in the wall ifrequired.
346	3.Insulating the suction pipe with expanded polyethylene foam 5mm tubing.
347	4.Laying 20mm dia flexible PVC drain pipe to throw out the condensate water being formed within the indoor unit.
348	5.Leakage testing the entire system gas in the unit.
349	6.Charging refrigerant gas in the unit.
350	7.Suitable electric wiring to be provided with 2.5 sqmm PVC insulated copper wire between indoor units upto 6 mtrs length and up to switch with in 3 meters of the location of indoor unit.(Carrier / Bluestar / O-General / Daikin make)
351	Supply and installation of 5 kVA Electronic Automatic Voltage Stabilizer V- GUARD makeVND 500 Model with Input Voltage range of150Volt - 285Volt and Output Voltage range 200Volts to 230 Volts with High and Low Voltage cut off and 3 minutes time delay relay with demonstration.
352	Supply and laying of 5/8\" and 3/8\" soft drawn copper refrigerant pipe of 0.8mm thick by flaring connection with interconnection wire between indoor & outdoor unit and 20mm drain pipe.(Extra beyond 3 mts/AC unit)
353	Supply and fixing of MS stand for fixing the outdoor unit
354	Supply and fixing of water drain pipe line (1\" PVC pipe)
355	Supply, Installation, testing and commissioning of ducted type 17 TR Floor Mounted Package type airconditioning units with indoor unit comprising scroll type compressor, cooling coil,evaporator fan and motor controls, insulated drain pan enclosed in sheet metal cabinet and 2 Nos of 8.5Tr outdoor unit completed with condenser fan and motor and enclosed in powder coated sheet metal cabinet Unit shall be suitable for operation on 415 +/-10% Volts,50 HZ, AC Supply, units shall be supplied withmicroprocessor control panel.
356	Price shall be inclusive of all power wiring from microprocessor panel to package unit and power & control wiring between package unit and out door units..Carrier make with condenser fan and motor and enclosed in powder coated sheet metal cabinet Unit shall be suitable for operation on 415 +/-10% Volts,50 HZ, AC Supply, units shall be supplied with microprocessor control panel. Price shall be inclusive of al l power wiring from microprocessor panel to package unit and power & control wiring between package unit and out door units.(Carrier make) (Computer Lab,Conference room,Moot court hall,Video conference)
357	Supply, Installation, testing and commissioning of 8.5TR Ceiling supsended Ducted type airconditioning units with indoor unit cooling coil, evaporator fan and motor controls, insulated drain pan enclosed in sheet metal cabinet and 1 No of 8.5Tr outdoor unit comprising scroll type compressor, complete with condenser fan and motor and enclosed in powder coated sheet metal cabinet Unit shall be suitable for operation on 415 +/- 10% Volts,50 HZ, AC Supply, units shall be supplied with microprocessor control panel. Price shall be inclusive of all power wiring from microprocessor panel to package unit and power & control wiring between package unit and out door units. (Carrier make)
358	Supply, fabrication and fixing of MS channel for mounting the Airconditioning Indoor Unit.
359	Supply, fabrication and fixing of MS channel for mounting the Airconditioning Outdoor Unit.
360	Supply and filling of R410A Refrigerant Gas
361	Supply, Fabrication and Erection of fabricated ducting made up of GI sheets of 20 Gauge thickness.
362	Supply, Fabrication and Erection of fabricated ducting made up of GI sheets of 22 Gauge thickness.
363	Supply, Fabrication and Erection of fabricated ducting made up of GI sheets of 24 Gauge thickness.
364	Supply and providing Acoustic for initial portion of Ducting with 12mm thick fiber glass rigid board covered with Tissue Paper and Aluminium Perforated Sheet.
365	Supply and fixing of extruded Aluminium powder Coated, supply and return Air Grilles /Diffusers with volume control dampers.
366	Supply and fixing of flexible Canvas connection
367	Supply and providing thermal insulation of 9 mm thick vidoflex with Aluminium Foil.
368	Supply and fixing of Refrigirant piping out of hard drawn copper pipe set of 28.6mm
369	Supply and fixing of Refrigirant piping out of hard drawn copper pipe set of15.90mm size
370	Supply and providing of pipeline nitral rubber insulation for section line refrigerant pipe and PVC pipe
371	Supply of extruded aluminium powder coated Gravity Louvers
372	Supply and providing 3core of 2.5sqmm copper flexible cable
373	Units Lifting, shifting, positioning charges
374	62.5KVA Genset:Supply, Erection, Testing, Commissioning and Handing over of 1 No 62.5 KVA Diesel Generator set of 0.8P.f, Three Phase, 415/440Volts, 50c/s, 1500RPM as detailed belowENGINE: Air cooled Diesel engine suitable for generator application with a shaft Output of 83 BHP at 1500 RPM under NTP Condition as per BSS 5514/IS 10000. The engine shall comprise the following standard scope of supply: (Make Kirloskar green / Cummins / Ashok Leyland) 1. Dry type Air cleaner 2. Expansion bellow 3. Radiator, Radiator fan and mounting 4. Air to air charge cooler 5. Exhaust Gas turbo charger 6. Lube oil cooler and Lube oil filter 7. Fuel filter(pre and micro) 8. In-line Mono-block fuel injection pump with governor and fuel feed pump 9. Electronic governor 10. 24V Battery charging alternator 11. 24V Volt electric starter motor 12. Engine test Certificate 13. Residential Mufler 14. Fly wheel with starter ring.
375	1. ENGINE INSTRUMENT PANEL MOUNTED. Engine control panel consisting of ON/OFF/START Key Lube oil pressure guage , oil temperature gauge, high water temperature guage and electronic hour meter and RPM indicator 2. SAFETY SYSTEM OF ENGINE :-The Engine shall trip for the following conditions with visual alarm device 1. Low lubricating oil pressure 2. High Water temperature 3. Vee-belt failure and over speed 4. The visual indicator should be provide for Low battery indication.The engine should be capable of providing 10% over load for one hour for every 11 hours continuous running at full load.
376	3. ALTERNATOR : Alternator capacity of 62.5 KVA/50 KW,AC 3 phase, 50HZ, 415/420V, 0.8PF with brushless excitation, self regulated designed to run at 1500 RPM under NTP conditions confirming to BS 5000/ IS 13364 (part-II) 1992 to be coupled directly to the Diesel engine and test certificate (Make: Kirloskar/ Stamford)
377	4.ACOUSTIC ENCLOSURE:- Acoustic enclosure shall be powder coated and fabricated of 16 SWG CRCA MS sheet.The silent canopy shall be of nut bolt type construction. Critical processes of punching are done on CNC Machine to maintain dimensional accuracy of hole within 0.1mm Powder coating done after seven – tank surface preparation process of sheet metal. Canopy panel and doors shall have inside lining of FIRE RETARDANT 64 Kg/m density mineral wool of 100mm thickness as Acoustic material. Four hinged doors shall be provided to canopy.The maximum permissible sound pressure level for new diesel generator (DG) sets shall be 75 dB(A) at 1 metre from the enclosure surface, as per CPCB norms. Surface treatment – Painting: The enclosure surface shall be suitably treated for degreasing de-rusting and posphating. The canopies are passed through seven – tank treatment thoroughly. Additional features of canopies: Canopy fabricated on CNC machines with dimensional accuracy of 0.1 mm so as to increase its durability.
378	Special designed supporting rips/structures are used in canopies so as to give sturdiness and to reduce the vibrations of the DG sets if any World class Cooling package: Canopies shall have cooling package for which it can also perform at 45 degree C/ambient temperature. No grouting required on the ground, only a level surface capable of with standing the DG weight.Lifting hooks shall be provided for the acoustic enclosure, which should be unloaded independently of the DG set.The Gen set frame shall also be provided with hooks for unloading Temperature rise inside the canopy: Canopies shall be designed so as to maintain the temperature difference between ambient and air inlet at cleaner within the enclosure well within 5-7 deg centigrade.
379	5. FUEL TANK : 150 liters. Removable fuel tank shall be fabricated out of 14 SWG CRCA MS sheet and is part of base frame. It is duly painted and fitted with inlet and outlet connection and mechanical fuel gauge. Fuel tank can be easily removed for clearing or any maintenance.6. BASE FRAME : The base frame should be fabricated in sheet metal. The base frame is rugged in construction and designed for mounting engine and brush less alternator closely coupled, with cross members mounted on AVM. The base frame shall be have provision for mounting of acoustic enclosure on it. The supply of generator set includes loading. Unloading and transportation charges.7. Battery: 1 No 12V 150AH Battery.8. Valid Type Approval Certificate and Conformity of Production certificate from the Authorised agencies should be produced to the department officials.
380	Supply, erection, testing, Commissioning and Handingover of 250 kVA Diesel Generator set of 0.8 P.F, three phase 415V/ 420 Volts, 50Hz, 1500 RPM CPCB Approved capacity with 310 HP Engine Rated output ofwater cooled clock wise rotating feed pump with 200kW/ 250kVA operating capacity brushless alternator close coupled underneath fuel tank standard safeties LLOP with stop solenoid battery with lead Electric start and vibration fitting and accessories and AMF panel as detailed below including transporting & unloading charges.
381	(A) Engine: Water cooled diesel engine suitable for Generator application with a engine rated output of 310 HP at 1500 RPM under NTP conditions. The Engine shall comprise the following standard fitting flexible coupling fly wheel, air cleaner, fan blower, radiator, water pump, fuel filter, lubricating oil filter, etc.(Kirloskar Green / Cummins / Ashok Leyland make)
382	(B) 12/24 Volt Electronic starting Equipment:Complete with starter motor, dynamo, standard batteries with cable, flexible exhaust piping of 50cms length
383	(C) Engine Instrument Panel / Mounted:Starting push botton / starting key, lubricating oil, temperature gauge, lubricating oil pressure gauge,water temperature gauge, safety control for low lubricating oil, pressure, safety control for high water temperature, safety control for over speed, hour meter (mechnical) and RPM indicator, battery charging ammeter. The engine should be capable of providing 10% over load for one hour for every 11 hours continuous at full load.
384	D)ALTERNATOR: 250kVA/200kW Capacity of brushless alternator, AC 3 phase, 50Hz, 415/420V, 0.8 PF, 1500 RPM under NTP conditions, conforming to IS:13364 (Part-II)/ 1992 to be means of coupling. (Stamford make/ Eq)
385	(E) AMF CONTROL PANEL:The AMF control panel (cubical) should be fabricated with vermin proof and dust proof best quality sheet steel and floor mounted with removable rear panels and hinged front doors with enamel painted and incorporating the following with suitable provision for connection incoming and outgoing leads having been made on the control panel.
386	1. AC Ammeter and selector switch
387	2 .Volmeter and selector switch
388	3. 3Nos current transformer with suitable ratio
389	4. Frequency meter
390	5. KWH meter
391	6. 1 No power factor meter
392	7. Battery charging set comprising of the following for charging the battery(2Nos 180AH) from mains
393	a. Transformer / Rectiferb. DC Ammeterc. DCVolt meterd. ON / OFF switche. Charging rate selector switchf. push button startg. push button stoph. push button reset
394	8. 1 set Air break contactor with auxiliary netural contactor for main supply
395	9. 1 set Low volage HRC fuse for the short circuit protection of the main supply
396	10. 1 set Alternator contactor with auxiliary netural contactor
397	11. 1 set Three pole bimetal release for over load protection of alternator
398	12. 1 set low voltage HRC fuse for the short circuit protection of the alternator
399	13.1 set DC control relays incorporating engine start/ stop and failure to start / lockout
400	14. 1 set selector switch auto/ manual
401	15. 1 no Push button \"Start\"
402	16. 1 no Push button \"Stop\"
403	17. 1 no Push button \"Reset\"
404	18.1 No signal lamp for indicating load on mains
405	19. 1 no signal lamp for indicating load on set
406	20.1no signal lamp for indicating set fails to start
407	21.1no signal lamp for indicating set running
408	22.1No signal lamp for indicating battery
409	23. 1set Pilot lamps of 3 nos
410	24. MCCB of 250A capacity with magnetic thermal overload release, instant start circuit trip and under voltage release switch
411	25.Rectangular copper bus bars (1No for each phase, neutral and earthing terminals) of adequate capacity duly colour coded with head shrinkable PVC sleeves.
412	26.1No mains voltage monitor
413	27.Hooter/Audio alarm for indicating set fails to start and for DG O/L.
414	28.1set Timers
415	29.Audio and Visual indicator arrangements for: a) Low lubricating oil pressureb) High water temperaturec) Over speed
416	30.1No Earth fault relay
417	31.Isolator to isolate the neutral
418	1. The control panel should be complete with necessary fuses, cables, label, other accessories with neutral isolation arrangements.2. The engine should trip for the following: a) Low lubricating oil pressureb) High water temperature c) Over speed
419	3.Supply and fitment of Auto Mains Failure Panel, 1 EB Service wih 200 Amps switch and contactors SUF Control relays, timers etc suitable for auto change over of DG & EB Service.
420	F.FUEL TANK460 litres fuel tank shall be fabricated out of 14 SWG CRCA MS sheet and is part of base frame.It is duly painted and fitted with inlet and outlet connections and mechanical fuel gauge. Fuel tank can be easily removed for cleaning or any maintenance.
421	G.BASE FRAME:Base frame should be fabricated with MS channel frame of rigidly welded construction for mounting of generaor set. The engine and alternator should be coupled by suitably designed diaphragm type flexible coupling with guard and mounted on the base frame with proper alignment.
422	H) ACOUSTIC ENCLOSURE:The Acoustic enclosure,Self standing weather proof KG- CPCB Typed Acoustic canopy KG 125WS floor mounting type with modular construction with the provision to assemble and dismantle easilyanddesigned to suit all weather condtions. Erection of acoustic enclosure suitable for 125KVA Diesel generator complete with all accessories as above and suitable supports etc.
423	Outer body 2 mm CRCA sheet steel door 2mm thick CRCA sheet. Inner surface 0.8m thick GI perforated sheet. Perforation area should be 2/3 of total area.
424	Insulation : 100 mm thick rock wool / (Density 65 Kg / cub.m) or as approved by competent authority to suit CPCB norms. The maximum permissible sound pressure level for diesel generator (DG) set shall be 75 dB(A) at 1 metre from the enclosure surface.
425	Supply of manuals for operation & maintenance of DG set with warranty card etc.CEIG approval: Preparation of site plan physical layout, electrical line schematic Diagram 10 sets, getting drawingapproval from CEIG preparationofcomplection report rectificationreport etc., arrangingCEIG inspection and obtainingCEIG safety certificate, payment of CEIG inspection fees if necessary and preparation of one set of approval Drawing and copy of safety certificate in a neat frame work.
426	(L)TESTING AND COMMISSIONING
427	After the installation of DG set on its foundation, the DG set should be tested and commissioned with first charging of lubrication oil to its level, first charging of battery and run the set for eight hours on full load test complete.The Genset engine and alternator make should be approved by SE before used on work. (SR)
428	ERECTIONOF GENSET: Providing suitable concrete foundation with cement concrete 1:2:4 with sand cushion all around the foundation and erection of generator set with proper alignment over the existing foundation.
429	Supply and erection ofTransformer plinth with suitable foundation for 500kVA outdoor transformer of size length 1.5m x breadth 1.5m x height 2.0m in the brick work, concrete foundation with cement concrete 1:2:4 with sand cushion all around the foundation for proper alignment of transformer equipment.
430	Supply and erection of 22KV 2 pole structure comprising 2 numbers 33’feet with RS Joist of size 200x100x5.7mm centre to centre 10 feet width with tie and support frame by 100x50x6mm RS channels, cross bracings by 50x6mm RS angles with requisite heavy duty clamps, bolts & nuts to support the switch gears,insulators, 0 copper jumpers and accessories to receive and distribute the 22 KV 2Pole structure of consumer side and painting of all metal parts with base coat of red oxide and approved paint one coat each as per engineer in charge with supply and erection of following HT accessories as per I.E rules and CEIG rules and regulations
431	a) 1sets 22 KV gang operated double break AB switch complete with connecting rod, operating handle, guides, ets., on 100x50 mmchannel frame.
432	b) 3 Nos lightning arrestor for 22KV system on channel frame
433	c) 1 set (each with 3Nos)DO/HG fuse assembly on channel frame.
434	d) 6 Nos Sufficient number 22KV pin insulators with metal pars on channel frame to maintain sufficient clearance for jumpers as per rules.
435	e) 1Set of 3Nos 22KV strain disc insulators with Metal parts on suitable top channel 100mm x 50mm x6mm to receive the EB supply and to feed 2 Pole structure. Supply and fixing of required cross bracing made of size 50x50x6mm MS angle to keep the structure in stable condition.
436	Providing necessary HT connection and jumper Connection from TNEB structure to consumer 2Pole structure with ACSR conductors “O” HDBC Copper conductor for giving necessary connection and jumpering from stain disc insulators, AB switch, lighting arrestor, HG fuse Through pin insulators and to transformer Bushing etc., complete with colour coding.
437	Supply, erection, testing and commissioning of 22kV/433V, 500KVA outdoor type oil immersed Distribution Transformer ofDyn11 vector group, ONAN cooling,copper wound with energy efficieny of Level 2withoff circuit with a tapping range of +5% to -5% in 5 steps with standard fittings and accessories (as per IS 1180-Part 1 with Amendment 1 to 4 ) and fitted with the following: a) HV Bushing Terminal arrangements.b) LT cable end box suitable for connection 3 run of 31/2 x 400 sqmm LTUG cables. c) Conservator with shutt of valve. d) Dehydrating slilicagel breather.
438	e) Conservator drain plug valve. f) Tank drain plug value. g) 4 Nos Plain rollers. h)Thermometer pocket with thermomoter with capillary tubing for maximum reading position. i) Drain plug valve. j) Filter valve. k) Oil filling whole end cap. l) Oil level guage. m) Two body earthing terminal. n)Rating and terminal marking diagram plate.
439	o) Lifting hooks / Lifting eyes / Jacking pad to facilitate movement to transformer and easy ground level. p) Off load hand operated tap changing switch at standby height from ground level. q) Tapping on primary winding for voltage variation +5% to - 5% in 5 steps r) Neutral on L.V side to be available for 4 wire supply and brought out truf pushing for earthing.s) Air release device. t) The transformer should be supplied with first filling of oil. u) Maximum Total losses for 22kV class transformer at 50% load is 1502 W and at 100% load is 4305 W.v) %Impedance = 4.50
440	w) 100 / 5 A ratio Tape Insulated Ring Type \"BPL\" Low Tension Current Transformer (AE make / Eq) with Rated Burden of 15 VA , Accuracy Class of5P10 in suitable Metallic enclosure fortransformer neutral - earth link terminal with necessary connections complete. (Make:ROWSONS / Kirloskar electric company).
441	Supply and providing HT yard link fencing with fixing of 8ft height in RCC concreted pillar of size 0.7f x 0.75ft by excavated the earth with depth of 2ft putting concrete pillar and refilling the earth to make good and fixing of chain link fencing with size of (2\"x2\")x10SWG galvanised iron wire all around the HT yard with necessary binding wire with ISI earthing. RCC pillar with chain link fencing should be provided for the total area of 48x20ft for seperate the EB yard and consumer supply yard places.
442	HT yard is provided with two gate entries, where one entry for EB side and another entry for consumer side. Each gate is fabricated using 2\" GI pipe as outer frame with weldmesh with necessary support. Earthing the fencing by using no.8 SWG copper wire all around the fencing. Earthing of gate by using 25mmx3mm copper flat, filling the yard with 400mm jelly for a height of 0.50feet from groundlevel to make good.
443	Design manufacturing Supply, erection, testing, commissioning and handing over of 22kV 25kA HT outdoor Three panel vacuum Circuit Breakers Switch Board VCB Comprising one number 630A 18.4 KA VCB as incoming and 2 Nos 630A 18.4 KA VCB as outgoing panels for outdoor installation each panel comprising 1. Draw out type 22 KV 630A 18.4 KA Horizontal Draw out / Horizontal isolation Vacuum Circuit Breaker with Motor (230V AC. – AC source of supply to be arranged purchaser) operated spring charged mechanism.
444	Anti Pumping Device 110V DC shunt trip and closing coils (DC source of supply to be derived from 3 Power Pack suitable for 3 tripping and two closing operation counter, 4 no + 4 NC spare Aux, contact for customer use, automatic safety shutter, mechanical close / trip knob, mechanical on/off indication, operating hand, 110V AC – 110V DC Power Pack etc (Incoming 1 No. 630A Outgoing 2 Nos of 630A).
445	2. 22KV / Root 3 / 110V /Root3 – Three phase, 3 Limb 200VA Class 1 Resin Cast Draw Out type Potential transformers complete with HT and LT HRC Fuses (Incoming – 1 No.)3. Current Transformers of 100 – 50/5-5 Amps. Dual Core (Core 1 -15 VA class 1 for metering and core 2-15 VA 5P 10 for protection) for incoming 3 Nos, current transformers of 30/5-5 Amps dual core
446	(Core 1-15VA Class 1 for metering and core 2 – 15VA 5P 10 for protection) for outgoing 2 Nos.
447	4. Meters :Digital Ammeter with Selector Switch (Incoming 1 No. Outgoing 1 No.)Digital Voltmeter with Selector Switch (Incoming 1 No.)
448	Digital Trivectormade of L&T / Secure make (Incoming 1 No)
449	Digital power factor meter – 1 No.
450	Digital Frequency Meter (Incoming 1 No.)
451	5. Protection :
452	TP ND IDMT 2 OC + 1 EF Relay with highest Instt elements similar like mega with type MCDG 61. (Incoming 1 No.)
453	6. TP ND IDMT 2 OC + 1 EF Relay similar like Megawin type MCDG 31 Master trip replay Megawin MVAJH 13 (Incoming 1 no. Outgoing 1 no.)
454	7. Breaker ON/OFF Auto trip / Healthy trip / Spring charged indication (Incoming 5 Nos. Outgoing 5 Nos.)
455	8. Phase indicating Lamps RY and B (Incoming 3 Nos.)
456	9. Control wiring
457	10.630A Copper Bus Bar PVC sleeved and required panel copper earthing.
458	11. Control Switch TNC (Incoming 1 no. Outgoing 1 No.).
459	12. Trip Circuit Healthy Push Button (Incoming 1 No. Outgoing 1 No.).
460	13. Common for Switch gear, MCB’s for AC DC Control Heater ON / OFF Switch with space heater and thermostat single phase switch socket, cubicle illumination lamp, Disconnecting type terminal Block etc. 14. MS sheet enclosure for Indoor Installation Powder Coated with paint shade Siemens Grey. Provision through Bottom entry to receive Incoming or outgoing cable excluding cable glands and cable terminal kit. (Make : System control /Mega win / Pentagon/ Equivalent)
461	Supply and clamping of 1R x 3C x 240 sq.mm HT XLPE 22 kV (E) aluminium armoured cable (Polycab/Eq)in Existingtrench or on wall with MS Clamps.
462	Supply and laying of 1R x 3C x 240 sq.mm HT XLPE 22 kV (E) (Polycab/Eq)aluminium armoured cable in a trench to be excavated at a depth of 1m putting 0.15m layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.
463	Supply and providing of HT cable outdoor termination for 3 core 240 sqmm 22kV (UE) belted PILC cable with necessary connection complete. (Rechym RPG/Eq)
464	Supply and laying of 3Runs of 3½ X 400 sq.mm PVC aluminium armoured LTUG Cable in a trench to be excavated at a depth of 0.75m putting 0.15m layer of sand and covering the cable completely with bricks and and refilling the earth to make good.
465	Supply and clamping of 3R X3 ½ x 400 sq.mm PVC LTUG aluminium armoured LTUG cable in existingtrench or on wall with MS Clamps.
466	Supply and fixing of brass cable gland for 3½ x 400 sqmm PVC armoured LTUG cable with earth connection.
467	Supply and providing cable end termination of 3½ x 400 sqmm PVC Aluminium armouredLTUG cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.
468	Supply of 100KVAR 415/440 volts 3 phase Automatic Power Factor at 0.95 lag made up of powder coated 18 SWG CRCA sheet steel enclosure with 250A TP MCCB as incoming (Siemens / C & S) with Delta connected capacitors (BCH / EPCOS) MPP type operating in multiple stage with 3 current and voltage Transducers (CVT) at the phases simutataneously to activate the desired power factor with a LCD display to show the following parametrers.
469	A) Vr-R phase Line VoltateB) Vy-Y phase Line VoltateC) Vb-B phase Line VoltateD) Ir-R phase Line currentE) Iy-Y phase Line currentF) Ib-B phase Line currentG) KW -present Kilo WattsH) KVAR- present KVAR DemandI) KVA -present KVAJ) PF- present power factorK) Number of capacitor bank ON/OFFL) Provision to indicate the unbalanced load provision to indicate the change in phase sequence.
470	The APFC panel should also with built in protection for high voltage/low voltage cut off, single phase preventor in current line surges, current limitors, current sensor etc., with connection complete and as per the relevant rules. Eight stages of Automatic power factor control panel with necessary connection.Stage wise details: I) Stage : 25 KV AR II) Stage : 20 KV ARIII) Stage : 15 KV ARIV) Stage : 10 KV ARV) Stage : 10 KV AR VI) Stage : 10 KV ARVII) Stage : 5 KV ARVIII) Stage : 5 KV AR
471	Preparation of Site plan, physical layout electrical schematic diagram(6 Sets) getting drawing approval from CEIG, preparation of completion report rectification report etc. arranging CEIG inspection, paying CEIGinspection fees and obtaining safety certificate from CEIG.
472	Lift arrangements:Supply, erection, testing, commissioning and handing over of 1 No 10 persons capacitygearless passenger Lift with machine room as per IS 14665 with latest amendments with the following Technical specifications
473	Location : Admin block
474	1. Type of lift : PassengerLift
475	2. Capacity of lift : 10 persons capacity passenger lift(680 Kgs)
476	3. Speed : 1 Metre / Sec
477	4. Type of Drive: Microprocessor based V3F drive permanent Magnet Synchronous Motor Gearless machine with two independent Dynamic braking
478	5. No. offloors: Ground +2 floor
479	6. Total Travel:7.2metres
480	7. Levelling Accuracy: High level accuracy with smooth and jerk free stopping.
481	8. Construction of Car:SS 304 grade 18SWG High quality stainless steel car with Neat hair line finish vinyl flooring and false ceiling.
482	9. Position of machine: Directly above the lift shaft.
483	10. No. of landing entrance: 3Nos
484	11. No. of car entrance:one in front only
485	12.Car entrance door: Power operated V3F drive Telescopic door opening sliding stainless steel scratch proof door with hair line finish.
486	13. Landing entrance door:SS 304 grade center door opening with hair line finish with provision for emergency key opening at all landings.
487	14.Lift well existing: 2100mm (width)x 2100mm (depth)
488	15. Lift pit depth:1500mm
489	16.Car size: 1300mm (width) x 1350mm (Depth)
490	17. Entrance: 800 mm (width) x 2000mm (height)
491	18.Lift machine room : 4350mm width x 5500mm (depth)
492	19. Power supply: 400/440 V, 3 phase, 50 Cycles/sec A.C. supply for power and 230 V, 50 HZ, single phase, AC supply for light.
493	20. Control: Micro Processor basedsimplex selective collective control with/without attendant.
494	21.Car fittings: sleek LED light fitting with 300mm sweep cabin fan
495	22.Lift well: R.C.C. construction with brick masonry.
496	23.Indication: Indication: UP/Down digital direction and position indicator for all landing and in car (25mm Height, seven segment Digital Floor position indicator scrolling type)
497	24.Emergency Alarm Bell: Battery operated alarm bell to be provided with Automatic charging device
498	25.Emergency light: Battery operated light to be provided with Automatic charging device.
499	26.Fire Man’s switch: To be provided at ground floor
500	27.Minor builders work: included in the scope.

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Tamil Nadu Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Government Law College At Karaikudi In Sivagangai District., Karaikudi-Tamil Nadu

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Government Law College At Karaikudi In Sivagangai District., Karaikudi-Tamil Nadu

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us