|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 0 - 100 m.All kinds of soil. |
| 2 | upto 1.5m depth |
| 3 | from 1.5 m upto 3.0 m depth |
| 4 | Bailing of water from the excavated earthfor column foundation by engaging suitable capacity of motor pump with delivery pipe line and to ensure no water stagnation during pouring of concrete etc including all labour, tools,tackles,equipment, fuel, etc , complete. |
| 5 | Providing and injecting chemical emulsions for pre-construction and stage wise construction anti-termite treatment ,creating a chemical barrier as per IS 6313 ( Part-2) in column footing, plinth beam, foundation basement and back filling the earth in stages as filling proceeds , top surfaces ofplinth filling, junction of wall and floor along external perimeter of the buildings all complete as per specification and as directed includingthe cost of labour,materials , equipments etc., complete. |
| 6 | Supplying and filling in Quarry dustto below the levelling coarse concrete for isolated foundations and basement filling on the building andwherever requiered below the Floor finish level and filling in layer not exceeding 150 mm thick including well watered and compacting levelling etc complete and as directed at site including all labour, tools , tackles, equipment, plants fuel,etc complete. |
| 7 | Re-filling availing excavated earth ( excluding rock ) in sides offoundations etc., in layer not exceeding 20 cm depth, consolidating each deposited layer by ramming and watering lead up to 50 m and lift upto 1.5 m and as directed at site including all labour, tools, tackles, equipment, fuel,etc complete. |
| 8 | Providing and laying Cement Concrete (PCC) 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) excluding centering and shuttering all complete as per specification and as directed includingthe cost of labour, materials, equipments etc., complete. |
| 9 | Providing Centering and shuttering including strutting, propping etc. and removal of form for sides and soffits including necessary supports and strutting upto 3.50mheight for plane surface as below in all floors with all cross bracings using MS Sheetsand Angles andspaced silver oak joists andsupported by casurina props complete in all floors, stairs includings all labour, tools, equipment, plant, diesel, etc ., complete |
| 10 | Foundations, footings, bases of columns, etc. for massconcrete |
| 11 | Suspended floors, roofs, landings, balconies and accessplatform |
| 12 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 13 | Lintels, beams, plinth beams, girders, bressumers andcantilevers |
| 14 | Providing and laying in position, standardised Concrete Mix M-30 Grade in accordance using with IS 456- 2000, with minimum cement content 350 kg and 20 mm and down graded BGSmetal for all RCC items of works including laying, pumping, vibrating with mechanical vibrators , finishing curing etc. |
| 15 | All works up to plinth level |
| 16 | All works from Plinth level upto Floor V Level |
| 17 | Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500Dincluding all labour, materials, tools, equipment, etc., complete |
| 18 | Providing and laying autoclaved aerated cement blocks masonry with150mm/230mm/300 mm thick AAC blocks in sub structure and super structure up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar allcomplete as directed including all labour, materials, tools, equipment, scaffolding, etc., complete(The payment of RCC band and reinforcement shall be made for seperately). |
| 19 | Proving ceiling plasteringthe exposed surface of RCC items of works such as roof slab,beams, sunshade ,stair case slab, with CM 1:3 (1 cement : 3 crushed fine sand)-12 mm thick ,including finishing neatly curing etc., including all labour, materials, tools, equipment, scaffolding, etc., complete |
| 20 | Plastering using CM 1:4 (1 cement : 4 crushed fine sand)-12 mm thick to inner and outer wall surfaces including finishing neatly curing etc., complete including all labour, materials, tools, equipment, scaffolding, etc., complete |
| 21 | Providing and laying water proofing treatment in sunken portion ofWCs, bathroom etc., by applying cement slurry mixed with waterproofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed withwater proofing cement compound @ 0.253 kg/ sqm. Thislayer will be allowed to air cure for 4 hours.(b)Second layer of slurry of cement @ 0.242 kg/sqm mixedwith water proofing cement compound @ 0.126 kg/sqm. Thislayer will be allowed to air cure for 4 hours followed with watercuring for 48 hours.The rate includes preparation of surface, treatment and sealing of alljoints, corners, junctions of pipes and masonry with polymer mixedslurry. The work is including all labour, materials, tools, equipment, scaffolding, etc., complete. |
| 22 | Providing weathering course for roof slab (with brick jelly lime concrete to an average thickness of 75 mm laid to necessary falls and slope with 20 mm nominal size brick aggregate and 50% lime mortar 1:2 (1 Lime putty: 2 Surkhi) rammed and finished with gur and belgiri treatment complete including rounding off junctions of roof slab with parapet wall with lime concrete all as per the specifications and as directed at site of works including curing all labour, materials, tools, equipments, transport, fuel etc., complete. |
| 23 | Cement concrete flooring 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) all as per relevant specification and as directed including all materials, labour,tools, plants, equipments, fuel, etc. complete. |
| 24 | Supplying and laying one course of pressed tiles of size 230 mm x 230 mm or nearest available size with thickness not less than 20 mm and set in C.M. 1:3 (1 cement: 3 clean coarse river sand) 12mm thick mixed with 2% of integral water proofing compound by weight of cement including pointing the joints of tiles with cement mortar 1:3 (1 cement: 3 Crushed fine sand) added with WPC and finished neatly all as per relevant specification and as directed including all materials, labour,tools, plants, equipments, fuel, etc. complete.Note: The Size and Make of the pressed tiles to be get approved by Engineer-in-charge of KPL |
| 25 | Providing and laying brick jellycement concrete of mix 1:3:6 (1 Cement: 3 coarse river sand: 6hard granite graded stone aggregate of 20 mm nominal size) in volumetric proportions for sunken portion for toiletand other such works wherever required all as per relevant specification, drawings and as directed including mixing, transporting, placing, ramming, consolidating, curing etc., including all materials, labour,tools, plants, equipments, fuel, etc. complete. |
| 26 | Providing and laying Vitrified tiles of Size 600mm x 600mm in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement:4 Crushed coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., all as per relevant specification and as directed including all materials, labour,tools, plants, equipments, fuel, etc. complete. |
| 27 | Providing and layingAnti skid Ceramic tile for flooring and dadooing in toilets using first quality of size 300mm x 300mm and of nominal thick or nearest size of approved shade / colour, set in C.M 1:4 (1 cement: 4fine river sand) 20mm average thick and fixing the tiles with neat cement slurry to required slope and joints neatly pointed with white cement added with pigment to match the colour of the tiles, curing all as per relevant specification and as directed including all materials, labour, tools, equipments etc., complete |
| 28 | Providing Eurocon tileflooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade Base with cement mortar 1:3 (1 cement: 3 crushed coarse sand ) 20mm thick wherever requiredand jointed with grey cement slurry mixed with pigment to match the shade of the tiles all as per relevant specification and as directed including all materials, labour, tools, equipments etc., complete |
| 29 | Providing Eurocontile 20 mm (average ) thick in risers and treads of steps skirting dado and pillars laid on 12mm (average thick cement morter 1:3(1 cement: 3 crushed coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete where ever required all as per relevant specification and as directed including all materials, labour, tools, equipments etc., complete. |
| 30 | Providing and fixing in position First class country wood (padauk)wrought main frames for door frames with necessary M.S. hold fasts / clamps fixed suitably to the masonry / concrete including cutting pockets and grouting with P.C.C. 1:3:6 (1 cement : 3 crushed coarse river sand : 6 hard granite graded stone aggregate of 20mm nominal size) in volumetric proportions, curing including painting with one coat of boiling coal tar paint on the portions of the timber abutting against masonry / concrete and as directed including all materials, labour, tools, equipments etc., complete. |
| 31 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction withframe of 1st class hard wood and well matched commercial 3 plyveneering with vertical grains or cross bands and face veneers on bothfaces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws and as directed including all materials, labour, tools, equipments etc., complete. |
| 32 | Providing and fixing 35 mm thick factory made Solid panel PVC Door shutter and Door, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel and as directed including all materials, labour, tools, equipments etc., complete. |
| 33 | Providing and fixing factory made uPVC white colour glazed windows comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding window made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. |
| 34 | Sliding glazed window |
| 35 | Fixed glazed window |
| 36 | Providing and fixing glazed shutters for doors, windows and clerestorywindows using 4 mm thick float glass panes, including ISI marked M.S.pressed butt hinges bright finished of required size with necessaryscrews, Second class teak wood - 35 mm thick and as directed including all materials, labour, tools, equipments, Scaffolding etc., complete. |
| 37 | Providing and fixing M.S. grills of required pattern in frames of windows/openings etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames or wherever required with rawl plugs screws etc.and where ever required and as directed including all materials, labour, tools, equipments, Scaffolding etc., complete. |
| 38 | Providing and fixing steel work welded in bulit up sections/framed work including cutting , hoisting, fixingin position and applyingpriming coat of approved steel primer etc. for HandRailsand wherever required all as directed by the Engineer-In charge including all labour, materials ,tools etc., all complete |
| 39 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid including all materials, labour, tools, transport, etc., complete. |
| 40 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushing cisternincluding all materials, labour, tools, transport, etc., complete. |
| 41 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required.White Vitreous China Wash basin size 660x460mm or nearest size available in market with a pair of 15 mm C.P. brass pillar taps including all materials, labour, tools, transport, etc., complete. |
| 42 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm including all materials, labour, tools, transport, etc., complete. |
| 43 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 44 | 20 mm nominal dia Pipes ( Concealed work, including cutting chases and making good the walls etc.) |
| 45 | 25 mm nominal dia Pipes(Internal / External work - Exposed on wall) |
| 46 | 32 mm nominal dia Pipes(Internal / External work - Exposed on wall) |
| 47 | Providing and fixing in position approvedquality rigid PVC pipe for drainage works below GL of approved makeincluding bends, specials, etc., including earth work excavation, refilling making connection to gully trap/manhole/septic tank and jointing the pipes withspecials using necessary adhesives allas directed at site including all labour, materials, tools, equipments, etc., complete |
| 48 | 110mm dia PVC pipe of 6Kgf/sq.cm |
| 49 | 75mm dia PVC pipe of 6Kgf/sq.cm |
| 50 | 110mm dia PVC pipe of 6Kgf/sq.cm - Rain Water Pipe |
| 51 | Providing and fixing in position PVC Nahani trap (floor trap) 110mm dia with gratings as available in the market suitable for PVC pipe and embedding the trap in the floor slab of concrete with suitable gradient making the joints water tight etc., all as directed at site of work including curing, all labour, materials, tools, equipments etc., complete. |
| 52 | Supplying and fixing in position of 15 mm dia C.P bib cock including all labour, materials, tools, equipments etc., complete. |
| 53 | Providing and fixing approved quality SS Health Faucet in the toiletall as per manufacturer’s specification and as directed including all labour, materials, tools, equipments, etc., complete. |
| 54 | Supplying and fixing CP grating of 6 mm thick with rim- 75 mm dia all as per manufacturer’s specification and as directed including all labour, materials, tools, equipments, etc., complete. |
| 55 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) all as per manufacturer’s specification and as directed including all labour, materials, tools, equipments, etc., complete. |
| 56 | 32 mm nominal bore |
| 57 | 25 mm nominal bore |
| 58 | 50 mm nominal bore |
| 59 | Supplyingand fixing on wall, face mirror of size 600x450mm (approx) beveled edge mirror with plywood/ hard board back of approved quality as directed at site of work including all materials, labour, tools, equipments, etc., complete. |
| 60 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type with With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 as directed at site of work including all materials, labour, tools, equipments, etc., complete. |
| 61 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete as directed at site of work including all materials, labour, tools, equipments, Scaffolding etc., complete. |
| 62 | Painting the Ceiling with two coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applyingadditional coats wherever required to achieve even shade and colour and as directed including all materials, labour, tools, equipments, Scaffolding etc., complete. |
| 63 | Painting the walls with two coats of premium acrylic emulsion paint of interior grade with two coatshaving VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour including all materials, labour, tools, equipments, Scaffolding etc., complete. |
| 64 | Applying wall painting with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including all materials, labour, tools, equipments, Scaffolding etc., complete. |
| 65 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture including all materials, labour, tools, equipments, Scaffolding etc., complete. |
| 66 | Finishing with Epoxy paint (two or more coats) at all locations preparedand applied as per manufacturer\"s specifications including appropriatepriming coat, preparation of surface, etc. complete, On steel work and as directed at siteincluding all materials, labour, tools, equipments, Scaffolding etc., complete. |
| 67 | Providing and fixing tower bolts (barrel type) 250x10mm with necessary screws etc. completeincluding all materials, labour, tools, equipments, etc., complete. |
| 68 | Providing and fixing Aldrop 250mm long with necessary screws etc. completeincluding all materials, labour, tools, equipments, etc., complete. |
| 69 | Providing and fixing Brass handle 125mm long with necessary screws etc. completeincluding all materials, labour, tools, equipments, etc., complete. |
| 70 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete including all materials, labour, tools, equipments, etc., complete. |
| 71 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. completeincluding all materials, labour, tools, equipments, etc., complete. |
| 72 | Constructing brick masonry chamber for underground C.I. inspectionchamber and bends with bricks in cement mortar 1:4 (1 cement : 4coarse sand) C.I. cover with frame (light duty) 455x610 mm internaldimensions, total weight of cover with frame to be not less than 38kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. topslab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stoneaggregate 20 mm nominal size), foundation concrete 1:5:10 (1cement : 5 fine sand : 10 graded stone aggregate 40 mm nominalsize), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand), finished smooth with a floating coat of neat cementon walls and bed concrete etc. complete as per standard design:Inside dimensions 455x610 mm and 45 cm deep for singlepipe line: With common burnt clay F.P.S. (non modular)bricks of class designation 7.5 |
| 73 | Supplying and fixing of pre-cast RCC well ring- 1.20m dia x 0.30m height for soak pit to be provided below the ground level and rcc cover slab to be provided over the RCCwell ring including all labours, materials , scaffolding, tools etc., complete |
| 74 | Constructing Soak Pitfor \"Rain Water Harvesting\" as directed at the site as directed at site including all materials, labour, tools, equipments, etc., complete. |
| 75 | Providing and fixinghigh density PVC water storage tank of 2000 Litres capacity of Sintex / Equivalent brand required with 3 layers as per site condition with cover as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.and as directed including all materials, labour, tools, equipments, etc., complete. |
