Tender For Repairs To Fire Exit Doors To Main Building At Iiser Pune; 1 Providing And Fixing Two Hour Fire Rated Door Single Leaf Of Size 1200 X 2400 With Frame Panic Bar With The Following Hardwares And Fittings-Vision Panel Of Size 200X300 Mm - 1 No List Of Hard Wares Ball Bearing Butt Hinges ( Fire Rated ) Ss - 304Of 100 X 89 X 3Mm As Per En 1935 With Ce Mark -8 NoS Door Closure En 5 - 7 ( Dorma Ts 68 ) 1 No ( Mounting Feature & Speed ) Speed Control / Overload Protection / Regular, Parallel & Over Mounting Features To Be Made Available. Neutral Salt Spray Test ( Dorma Sh 812 / Lockwood Ho 2 ) Lock Shall Be Of Dead Lock Type With Euro Profile Cylinder And To Be Tested For 500000 Operation Cycles , Cylinder And Turn With Escintheions As Per En 12209 With Ce Mark.- 1No Flush Bolt L=300Mm At The Bottom And 600Mm At The Top - 2 NoS ( Each One ) Dust Proof Floor Socket - 1No. One Complete Door Fittings , Hinges And Installation , Gst Etc Complete. Shop Drawing Shall Be Got Approved From Engineer In-Charge Before Starting Actual Production Of Door At Factory. Actually Installed Fully Functional Door Shall Be Including Frame Shall Be Measured For Payment. Approved Door Fittings : Dorma / Hafele / Hettich , Approved Door Make Shakti Hormann / Navair / Gmp / Matrix 2 Door Panel Servicing Of Fire Exit Metal Doors By Removal , Realignment, Refixing , Oiling And Greasing Of Hinges , Panic Bars , Locking Arrangement , Removing Nonservicable Door Fittings , Realignment Of Doors , Supply, Installation, Testing , Commissioning Of Door Fittings, Spares And Bring To Smooth Operation Of Fire Exit Doors As Per ManufacturerS Specifications Etc. Complete As Per Direction Of Engineer In Charge , Iiser Pune. Quoted Rate Shall Be Including All Necessary Fittings, Tools , Tackles , Gst , Lead , Lift Etc. And All Necessary Equipment’S Required At Site. All Works Shall Be Got Executed Through Directly / Authorized Representative / Technician / Dealer Of M / S Shakti Hormann Pvt.Ltd Ensuring Smooth Operations Of Doors. Spares Shall Be Paid Itemise Separately. 3 Removal , Refixing And Realignment Of Door Panel By Shakti Hormann Authorized Technician , Aligning Of Door, Making Smooth Operation And Refixing With 150Mm Deep Anchor Fastener By Hilti. 4 Supply , Installation , Testing And Commissioning Of Door Fittings And Spares , Spare-1 : Fire Rated Ball Bearing Butt Hinges Item Code 3090F Dorma, 5 Knuckles In Each Hinge. Approved Door Fittings : Dorma / Hafele / Hettich 5 Supply , Installation , Testing And Commissioning Of Door Fittings And Spares : Spare-2 , Surface Door Closer , Silver Finish Dorma Ts68 Standard Arm En 2 / 3 / 4.Approved Door Fittings : Dorma / Hafele / Hettich 6 Supply , Installation , Testing And Commissioning Of Door Fittings And Spares : Spare-2 External Trim Dorma Phcrt 2905, Without Cylinder, Silver Finish. Approved Door Fittings : Dorma / Hafele / Hettich 7 Supply , Installation , Testing And Commissioning Of Door Fittings And Spares : Spare-4 Euro Profile Half Cylinder 42Mm Size. Approved Door Fittings : Dorma / Hafele / Hettich 8 Supply , Installation , Testing And Commissioning Of Door Fittings And Spares : Spare-5 Pchr 1000 , Point Locking Suitable For Width-1300Mm In Silver Finish. Approved Door Fittings : Dorma / Hafele / Hettich 9 B : Repairs To Door Opening : Fixing Of Metal Door Frame In Position By Removing Loose Mortar Around The Door Frame , Removal Of Loose Fasteners By Cutting Without Damaging Door Frame , Positioning Of Door Frame In Prefect Position For Smooth Door Panel Operation Etc Complete. 10 Repairs To Plaster Around Door Frames Of Thickness 12 Mm To 20 Mm In Patches Of Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing And Plastering The Surface Of The Walls Complete, Including Disposal Of Rubbish To The Dumping Ground, All Complete As Per Directions Of Engineer-In-Charge. With Cement Mortar 1:4 ( 1 Cement : 4 Crush Sand ) . Quoted Rate Shall Be Including Of Removing Loose Plaster, Mortar , Brickbats, Packing Material Etc Behind Door Frame , Cleaning Of Wall Surface , Final Positioning Of Door Frame With Suitable Size Wooden Supporting Battens, Filling Of Mortar Of Cm 1:4 Gap Between Door Frame And Wall , Cm 1:4 Should Be Added With Suitable Epoxy Based Mortar Bonding Agent From Sikha / Dr.Fixit / Basf .Quoted Rate Shall Be Including , 2Mm Birla / Altek White Putting , Two Coats Of Priming And Two Coats Of Plastic Emulsion Paint Of Matching Shade Etc Complete As Per Direction Of Engineer In Charge, Iiser Pune , All Necessary Fittings, Tools , Tackles , Gst , Lead , Lift Etc. And All Necessary Equipment’S Required At Site. Actual Repaired Area Of Plaster Around Door Frame Shall Be Measured For Payments. 11 Positioning Of Door Frame As Site Requirement , Door Panel Size And Smooth Operation Of Metal Door In Perfect Line , Level And Alignment By Providing And Fixing Hilti Frame Anchor Hrd-Cr 8X100 Standard Plastic Frame Anchor With Countersunk Head ( A4 Ss ) . Quoted Rate Shall Be Including Working As Per Direction Of Engineer In Charge, Iiser Pune , All Necessary Fittings, Tools , Tackles , Gst , Lead , Lift Etc. And All Necessary Equipment’S Required At Site , Cleaning Etc. Actual Number Of Fasteners Fixed At Site Shall Be Measured For Payments. 12 Steel Work In Built Up Tubular ( Round, Square Or Rectangular Hollow Tubes Etc. ) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. Hot Finished Welded Type Tubes. Quoted Rate Shall Be Including Chipping Of Door Opening Sides As Per Size Of Selected Steel Section To Accurate Size So That Fire Door Steel Frame Fits It In To It , Primer And Two Coats Of Enamel Paint And Working As Per Direction Of Engineer In Charge, Iiser Pune , All Necessary Fittings, Tools , Tackles , Gst , Lead , Lift Etc. And All Necessary Equipment’S Required At Site , Cleaning Etc. Weight Of Actual Ms Installed At Site Shall Be Measured For Payments.
