|
| 1 | Supplying, fitting and fixing 38 mm thick solid core type decorative single leaf flush door shutter with both sides decorative with black core standard make with aluminium fittings such as hinges, tower bolts, handle, cleats and sand block taxes all complete as per building specification and direction of E/I. |
| 2 | Providing two coats of synthetic enamel paintof approved shade and make over steel surface including cleaning the surface thoroughlyscaffolding and taxes all complete as per buildingspecification & Direction of E/I. |
| 3 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone and fine sand paper, applying putty where required, scaffolding washing of floors and taxes all complete as per specification and direction of E/I. |
| 4 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete. |
| 5 | Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement and screws etc. complete : 18mm thick |
| 6 | Providing & Fixing decorative high pressure laminated sheet of plain /wood grain in gloss / matt/ suede finish with high density protectivesurface layer and reverse side of adhesive bonding quality conformingto IS : 2046 Type S, including cost of adhesive of approved quality. |
| 7 | 25 mm wooden planking, tongued and grooved in flooring, including fixingwith iron screws complete with : |
| 8 | Providing and fixing cup board shutters 25 mm thick, with Pre-laminatedflat pressed three layer particle board or graded wood particle board IS:12823 marked, exterior grade (Grade l Type ll), having one side decorativelamination and other side balancing lamination, including IInd class teakwood lipping of 25 mm wide x12 mm thick with necessary screws andbright finished stainless steel piano hinges, complete as per directionof the Engineer-in-Charge |
| 9 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting ofsides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineerin-charge and as per manufacturer\"s specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60 |
| 10 | Unbranded Blackout roller blind(ZEBRA) |
| 11 | DURIAN Revolving Chair With Arm Centre pivot mechanismDURIANR(Rich/37828/HB) |
| 12 | DURIAN OFFICE / VISITOR CHAIRS with Seat D X W X H 500 mm 600 mm 460 moulded plywoodDURIANR(BZT/60102 VISITOR CHAIR) |
| 13 | Point Wiring in PVC Conduit, with Modular type Switch: - |
| 14 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 Sq.mm FR PVC insulated copper conductor single core cable in surface/recessed with PVC conduit, with modular type switch, modular plate, suitable size of GI box etc as required.Makeof Switch Sockets :- Havells (CRABTTERY), Legrand / Mk- /Scheinder, Anchor Roma). |
| 15 | Power plug wiring in PVC conduit (2x4 sq.mm.):- |
| 16 | Circuit/Sub-main wiring in PVC Conduit:- |
| 17 | Wiring for circuit / sub-main wiringalong with earth wire with thefollowing sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required. |
| 18 | 2x1.5 Sqmm + 1x1.5 sqmm earth wire(for Single Separate 6A) (Circuit shall be taken from nearest switch board ) |
| 19 | 2x2.5 Sqmm + 1x2.5 sq mm earth wire (for switch board circuit, 3 Nos. 6A socketswith 1 no.16ASwitch near each LAN out letsand circuit wiring for AC indoor units |
| 20 | 2x4.0 Sq.mm + 1x4.0 Sq.mm earth wire. |
| 21 | 2x6.0 Sq.mm + 1x6.0 Sq.mm earth wire(to use as incomer supply for SPN DB of Lift Machine Room & Lift Well) |
| 22 | 4x10 Sq.mm + 2x6 Sq.mm earth wire. (to be used for TPN Normal DB Sub-Main). |
| 23 | S/F Modular type Switch / Socket:- |
| 24 | Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connections butexcluding modular plate etc as required. Make:- Havells (CRABTTERY), Legrand /Mk/ Scheinder/Anchor- Roma). |
| 25 | 5/6 amps, one way modular switch |
| 26 | 15/16 amps, one way modular switch |
| 27 | 5/6 amps, 3 pin modular socket |
| 28 | 15/16 amps, 6 pin socket Outlet |
| 29 | S/F Modular boxes, base and cover plate:- |
| 30 | Supplying and fixing following size /modules G.I. box along with modular base and cover plate for modular switches in recess etc. as required |
| 31 | 1 or 2 modules (78mmx78mmx45mm) |
| 32 | 4/5 modules (78mmx140mmx50mm) |
| 33 | 6 modules (78mmx205mmx50mm) |
| 34 | 8 modules (78mmx230mmx60mm)(3 nos. 6A Sockets & 1 no. 16A Switch) |
| 35 | S/F light plug point with modular type accessories:- |
| 36 | Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 5 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch, connection, painting etc as required.Make:- Havells (CRABTTERY), Legrand /Mk/ Scheinder- Anchor- Roma). |
| 37 | S/F power plug point with modular type accessories:- |
| 38 | Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular type switch, connection, painting etc as required.Make:- Havells (CRABTTERY), Legrand /Mk/ Scheinder- Anchor- Roma). |
| 39 | S/F Ceiling Rose:- |
| 40 | Supplying andfixing 2 pin ceiling rose on the existing junction box/ wooden block including connection etc as required. |
| 41 | DISTRIBUTION BOARD & MCB/RCCB |
| 42 | S/F SP MCB DB:- |
| 43 | Supplying and fixing following way,SP&N MCB distribution board of sheet steel for 240 Volts on surface /recess complete withtinned copper bus bar, neutral busbar, earth bar, detachable gland plate, interconnections, phophatized and powder coated painted including earthing etc. as required ( But without MCB/RCCB/ISOLATOR). Make:-Legrand/L&T/Schneider/ Siemens |
| 44 | 8 Way Double Door |
| 45 | 12 Way Double Door |
| 46 | Supplying and fixing 240/415 V, 10 kA, \"C\" series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required.Make:- Legrand/L&T/Schneider/Siemens |
| 47 | 40A TPN |
| 48 | 20A 240V SPN MCB Industrial Socket Outlet:- |
| 49 | Supply and fixing of 20A, 240V, SPN insustrial type socket outlet with 2 poles and earth, metal enclosed plug top along with 20 amps \"C\" series, SP MCCB, in sheet steel enclosure, on surface or in recess withchained metal cover for socket out let and complete with connections, testing and commissioning etc as required. Make:- Legrand/L&T/Schneider/Siemens |
| 50 | EARTHING SYSTEM |
| 51 | Earthing with G.I. Earth Pipe 4.5 Meter long , 40mm dia including accessories, and providing massonry enclosure with cover plate having locking arragement and watering pipe etc. with charcoal and salt as required. |
| 52 | S/L 25mmx5mm G.I. strip as strip earth electrode |
| 53 | Supplying and laying 25mmx5mm G.I. strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I.nut Bolts, spring washer etc. as required. (jointing shall be done by overlapping and with 2 sets of G.I.nut bolt and spring washer spaced at 50 mm.) |
| 54 | SITC of400 mm (16\")sweepAC 230/250 volts, 50 HZ Wall Mounting Revolving Fan with brackets,cooper winding, etc. complete all electric room etc. Make :- Usha/Crompton / Havells . |
| 55 | SITC of following rating recess/surface mounted LED round/square shape Down Light Luminarie with pressure die-cast housing for single phase supply voltage. Luminarie shall be confirm to IS; 10322 part-5/section-2 or IEC 62722 with all necessary accesoreies as required. (100l/w , 5700K Cool white, rated voltage- 220/240V. Make:- Havells/Philips/Wipro. |
| 56 | 6/7 W Square Down light (Surface) |
| 57 | 12 W Square Down light (Surface) |
| 58 | 15/16 WSquare Down light (Surface) |
| 59 | 18/20 W Round /Square Down light |
| 60 | 2\"X2\" LED Panel Light (36W)Environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling |
| 61 | Supplying fitting & fixing Carrier Split Air Conditioner Including Green AC 3501 = 5200, 3 star |
| 62 | ANALOGUECONFERENCING SYSTEM :- |
| 63 | Mic, Speaker solutions and amplifications:- |
| 64 | SITC of Digital corded type Deligates Unit microphone. Preffered make-AKG/BOSE/BOSCH |
| 65 | The ‘Wireless Device’ shall enable participants to take part in a discussion by speaking into a microphone, (when it is activated) and listening to proceedings via the built-in loudspeaker or connected headphones. |
| 66 | The Wireless Device shall have the following features and benefits:• Possible to speak indicator.• Request to speak indication in microphone.• Single use, dual-useor chairpersoncan be configured via the web interface.• Audio mute button.• Operating in the 2.4 GHz and 5 GHz (UNII1, 2 (extended) and 3) (license free) band. |
| 67 | • Maximum speech intelligibility shall be guaranteed at all times.• TheWireless Device shall be connected to the Wireless Access Point.• TheWireless Device shall produce crystal clear sound due to a very high signal to noise ratio and smart frequency selection. • The loudspeaker and microphone can be active at the same time for a face to face meeting experience. To prevent acoustic feedback, a feedback suppressor is built in. |
| 68 | The Wireless Devices shall accommodate two headphone connections and controls (on the left andright hand side), so the speaker can be heard clearly even with excessive background noise. |
| 69 | Separate battery pack, easy to change & charge. |
| 70 | Microphone button with a red or green illuminated ring. Red indicates microphone is active, green indicates request-to-speak accepted. |
| 71 | Uni-directional microphone on adjustable stem, Built-in plop and windshield |
| 72 | Low susceptible for mobile phones, |
| 73 | For acoustical challenging rooms |
| 74 | Battery Pack for Deligate Unit |
| 75 | Pluggable long microphone, length 480 mm (19.9 inch), silver |
| 76 | Cost of Digital corded type Deligates Unit microphone |
| 77 | SITC of Digital Conference controllerwith control of 80 Delegates with Feedback Suppresser and MP3 Recorder inbuilt . Make- AKG/BOSE/BOSCH |
| 78 | The ‘Wireless Device’ shall enable participants to take part in a discussion by speaking into a microphone, (when it is activated) and listening to proceedings via the built-in loudspeaker or connected headphones. |
| 79 | The Wireless Device shall have the following features and benefits: • Possible to speak indicator.• Request to speak indication in microphone.• Single use, dual-useor chairpersoncan be configured via the web interface.• Audio mute button.• Operating in the 2.4 GHz and 5 GHz (UNII1, 2 (extended) and 3) (license free) band. |
| 80 | • Maximum speech intelligibility shall be guaranteed at all times.• TheWireless Device shall be connected to the Wireless Access Point.• TheWireless Device shall produce crystal clear sound due to a very high signal to noise ratio and smart frequency selection. • The loudspeaker and microphone can be active at the same time for a face to face meeting experience. To prevent acoustic feedback, a feedback suppressor is built in. |
| 81 | The Wireless Devices shall accommodate two headphone connections and controls (on the left andright hand side), so the speaker can be heard clearly even with excessive background noise. |
| 82 | Separate battery pack, easy to change & charge. |
| 83 | Microphone button with Red or green illuminator. Red indicates microphone active, green indicates request for speech accepted. |
| 84 | Uni-directional microphone on adjustable stem, Built-in plop and windshield |
| 85 | Low susceptible for mobile phones, |
| 86 | For acoustical challenging rooms |
| 87 | Battery Pack for Contribution Unit |
| 88 | Pluggable long microphone, length 480 mm (19.9 inch), silver |
| 89 | SITC of Mixer 10 channel Analog Mixer suitable for the prescribed solution Make-Souncraft/AKG/Yamaha/Bosch/BOSE or as approved bythe consultant; |
| 90 | SITC ofwall mounted cabinet speaker 30 Watt includes mounting system Dual 4\" 2-Way Surface-Mount Loudspeaker,Compact full range,Ideal for Conference Halls, patios, and retail,Vented LF enclosure,1-inch titanium diaphragm HF driver with neodymium magnetic structure,Coherent Coverage Waveguide,Full-bandwidth overload protection (LF and HF),Elliptical weather-resistant ABS enclosure,Paintable black or white finish,Magnetically shielded for video applications,Strong-Arm Mount™ for easy, flexible aiming,\"T\" version for 70 or 100 V distributed systems with specifications of Frequency Range (-10 dB)- 65 Hz – 20 kHz, Sensitivity (SPL, 1 W/1 m)- 89 dB,Max. SPL/1m (calc.)- 115 dB,Power Handling (Continuous, Peak)- 100 W, 400 W,Transformer taps(transformer version only)- 70 V: 3.75 W,70 V/100 V: 7.5, 15, 30 W, Coverage, H x V- 120° x 80°, LF Transducer-Two 4\", HF Transducer -1\", Nominal impedance-(non-transformer version)- 8 O, Dimensions (H x W at front x D) -12.2\" x 6.9\" x 8.5\",(310 x 175 x 216 mm) ; Make- AKG/BOSE/EV or as approved by the Consultant |
| 91 | SITC of Power Amplifier Dual 250 W/CH Power Amplifier,Efficient performance for low impedance or distributed systems ,Ideal for sound reinforcement, paging, and life safety ,250 W per channel for 4 O or 70/100 V lines,Bridged mono out for 540 W into 8 O,Compact 2 RU design,Stepped rear-panel level attenuation,Selectable 50 Hz or 300 Hz high-pass filter,Thermal protection, peak limiting, turn-on delay Phoenix-type inputs and outputs,Three-stage front-to-rear fans,Integrated rack ears for direct mounting, havin detailed specs of Power Bandwidth THD=1%, Ref.1kHz, Half Power-45Hz - >20kHz,Input Impedance, 20Hz ... 20kHz,Balanced->20kOhm,Signal-to-Noise Ratio, A-Weighted 103 dB,Input Sensitivity at Rated Output Power or Voltage, 1kHz-0dBu (775mV),THD at rated output power, MBW=80kHz- 1kHz-<0.1%,IMD-SMPTE, 60Hz, 7kHz <0.1%,DIM30, 3.15kHz, 15kHz <0.1%,Crosstalk, Ref. 1kHz, at 10% Rated,Output Power-<-75 dB,Power Requirements- 120V or 230V, 50Hz -60Hz,Protection -Audio Limiters, High Temperature Peak Current Limiters,Turn-On Delay,Cooling Front-to-Rear Make: AKG/BOSE/EV(BOSCH 0r as approved by the consultant ) |
| 92 | SITC of Handheld Wireless Mic with Cardiod polar pattern for transmitter,Dynamic microphone with Neodymium magnet , Receiver frequency response 80Hz-18kHz,Receiver RF sensitivity < 1.0 µV,Receiver Image rejection>55dB,Receiver Dyanmic range >95dB and receiverhaving 32 channels possible,Receiver S/N ratio >100dB A,distortion <1 %, Transmitter sensitivity - 3.2 mV/Pa,modulation:+/-40kHz(Approved Makes: Audio Technica, Senheiser, Electro-Voice or as approved by the Consultant.) |
| 93 | SITC of Headworn Wireless Mic with Cardiod polar pattern for transmitter,Dynamic microphone with Neodymium magnet , Receiver frequency response 80Hz-18kHz,Receiver RF sensitivity < 1.0 µV,Receiver Image rejection>55dB,Receiver Dyanmic range >95dB and receiverhaving 32 channels possible,Receiver S/N ratio >100dB A,distortion <1 %, Transmitter sensitivity - 3.2 mV/Pa,modulation:+/-40kHz(Approved Makes: Audio Technica, Senheiser, Electro-Voice or as approved by the consultant) |
| 94 | SITC of required cables & Accessories forHall |
| 95 | SITC of Equipment Rack with power socket, amplifier support, exhaust fan, etc. |
| 96 | SITC Speaker Cable 2 core 2.5 Sqmm PVC coated and PVC sheathed multistrand copper flexible unarmored FRLS cable; Make-KRYSTAL/Polycab |
| 97 | SITC of Mic Cable-Supply of 0.75 Sq. mm 2 Core Shielded Microphone Cable (100 m Roll); Approved make- Krystal |
| 98 | SITC of Freestanding Gooseneck Mic with base for podium having dual condensor back electret microphone element ,Selectable Omnidirectional/ Cardioid/ Supercardioid/ Hyper Cardioid polar pattern,LED status display and with programmable button for Push to Talk or Push to Mute functions having ,frequency response 50Hz-20kHz ,sensitivity 5.5mV/Pa,clipping level >125dB SPL ,output impendence 200 ohm, Dynamic Range > 100 dB. (Approved Makes: Audio Technica, Senheiser, Electro-Voice or as approved by the Consultant) |
| 99 | SITC of Wooden Podium along with Cable Cubby (One HDMI Cable, Two LAN Cable, Two unswitched AC outlet,One 3.5 mm Mini Stereo Audio Jack,Compact size with square bezel Black color |
| 100 | SITC of Cable Cubby (One HDMI Cable, Two LAN Cable, Two unswitched AC outlet,One 3.5 mm Mini Stereo Audio Jack, Compact size with square bezel Black color |
| 101 | SITC of HDMI Cable-2 Mtr. ;Make- Krammer/Wyrestorm |
| 102 | Motorized Screen:-SITC of Projection screen of high gain ,Best qualityMotorized Projection Screen with Remote ,133\",16:9 with viewing area of 65” x 116”; Make: Liberty/Da-Lite/Draperor as approved by the Consultant. |
| 103 | SITC of Ceiling mounting Kit For Projector; Preferred Make- Liberty/Raymax or as approved by the Consultant. |
| 104 | Projector:-Supply, Installtion,Commisioning and testing of Projector: 4,300 lumens WXGA high brightness compact projector Display System: 3 LCD system Size of effective display area: 0.75”(19mm) x 3 BrightEra LCD Panel Aspect ratio 16:10,Number of pixels : 3,072,000 (1280x800 x 3) pixelsThrow Ratio :1.10:1 to 1.79:1,Zoom – Ratio : Approx. x 1.6,Contrast ratio (full white / full black) 20000:1 *2,Speaker:Speaker 16 W (monaural)INPUT A : RGB / Y PB PR input connector: Mini D-sub 15 pin female Audio input connector: Stereo mini jackINPUT B:RGB input connector: Mini Dsub 15 pin female Audio input connector: Stereo mini jackINPUT C: HDMI input connector: HDMI 19-pin, HDCP support Audio input connector: HDMI audio supportINPUT D:HDMI input connector: HDMI 19-pin, HDCP support Audio input connector: HDMI audio support,S VIDEO IN : S Video input connector: Mini DIN 4-pinVIDEO IN: Video input connector: Phono jack,OUTPUT : MONITOR output connector: Mini D-sub 15 pin female Audio input connector: Stereo mini jackLAN : RJ-45, 10BASE-T/100BASE-TX,USB:Type-A & Type-BMICROPHONE IN:Microphone jack: Mini Jack,Display resolution: Maximum display resolution: 1600 x 1200 dots, fV:60Hz,Screen size : 30\" to 300\" (0.76 m to 7.62 m) (measured diagonally.Make- Panasonic/Hitachi/Sony or as approved by the Consultant. |
| 105 | SITC ofHDMI bidirectional RS232 and IR over high definitionbase 1,Transmitter, Make-Kramer/Crestron/ Key digital |
| 106 | Add GST 18% |
| 107 | Add L.cess 1% |
