|
| 1 | CIVILWorkEarth work in excavation of foundation trenches in hard soil including dressing and leveling the bed and depositing the soil within 50M initial lead and 1.5M initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3M in depth and as per the direction of the EIC. |
| 2 | Supplying, filling in foundation and plinth with sand in 22.5 cm (9”) thick layers including watering and ramming with cost, conveyance, royalties & taxes of sand with labour & T&P required for the work etc. complete (Measurement will be taken on finished compacted section only). |
| 3 | Cement concrete of proportion (1:3:6) in foundation using 4cm (1 ½”) size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties & taxes of all materials with all labour, cess & T&P required for the work etc. complete in all respect. |
| 4 | Fly Ash brick masonry in cement mortar (1:6) inFoundation and plinthusing Fly Ash bricks of 25cmx12cmx8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and taxes of all materials with all labour and T&P required for the work complete in all respect in all floors |
| 5 | R.C.C M-25 in the following works using 20 mm and down graded C.B.H.G. chips with cost of all charges etc all complete.Column Base & Footing |
| 6 | Plinth Band |
| 7 | Column in Superstructure |
| 8 | Lintel |
| 9 | Roof Beam |
| 10 | Chajja |
| 11 | Shelves |
| 12 | Roof Slab |
| 13 | Cutting, Straightening coiled or bent up M.S. rods or Tor steel (Fe-500) SAIL make welding or jointing if necessary, bending, tying the grills and laying in position as required for R.C.C. works and hoisting, lowering and palcing in position in all floors according to approved designs and drawings including cost, conveyance, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P etc. complete in all respect as directed by the Engineer in charge (payment will be made according to the actual weight of M.S rod/ Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost) |
| 14 | Fly Ash brick masonry in cement mortar (1:6) in Superstructureusing Fly Ash bricks of 25cmx12cmx8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and taxes of all materials with all labour and T&P required for the work complete in all respect in all floors |
| 15 | 12mm (½”) thick cement plaster (1:6) finished smooth to outside smooth surface of brick walls after raking out the joint including watering and curing with cost, conveyance, royalties and taxes of all materials with all labour and T&P required for the work etc. complete in all respect. |
| 16 | 16mm (5/8”) thick cement plaster (1:6) finished smooth to inside roughsurface of9”/10” thick brick walls after raking out the joints including watering and curing with cost with cost, conveyance, royalties and taxes of all materials with all labour, T&P required for the work etc. complete. |
| 17 | 6mmthick cement plaster (1:4) and using slurry treatment to ceiling including watering and curing with cost, conveyance, royalties and taxes of all materials with all labour and T&P required for the work etc. complete in all respect. |
| 18 | Supplying, fitting and fixing in position M.S grill of approved design in windows and ventilators made out of 20mm X 6mm size M.S. flat/10mm thick square bar including cutting the same to proper sizes, welding, chamfering and one coat of priming with red oxide and fixing with screws as may be required including cost, conveyance taxes of all materials, cost of all labour, sundries and T&P etc. |
| 19 | Dressed seasoned sal wood choukath for doors including cost of all charges e.t.c. all complete. |
| 20 | Suppling, fitting & fixing of 30mm thick flush door shutter of mayur, century or sylvan make including cost of all charges etc all complete. |
| 21 | Suppling, fitting & fixing of UPVC sliding window (Three track) of approved NCL or Fenesta make with 5mm thick saint gobian toffened glass including cost of all charges etc all complete. |
| 22 | Providing, supplying, fitting & fixing of granite stone Tile in floor on 20mm thick bed of cement mortar (1:4) including cost of all charges e.t.c. all complete. |
| 23 | Providing, supplying, fitting & fixing of Vitrified tile in floors on 20mm thick cement mortar (1:4) of 600X600mm including cost of all charges e.t.c. all complete. |
| 24 | Providing, supplying, fitting & fixing of Vitrified tile in walls on 12mm thick cement plaster (1:4) of 600X600mm including cost of all charges e.t.c. all complete. |
| 25 | Finishing wall surface with cement based wall putty over wall surface including cost of all charges e.t.c. all complete. |
| 26 | Painting two coats with any approved Plastic Emulsion paint to inside wall surface over a coat of cement primer including cost of all charges etc all complete. |
| 27 | Painting two coats with any approved weather seal coat paint over a coat of cement primer to out side wall surfaceincluding cost of all charges etc all complete. |
| 28 | Painting two coats with any approved synthetic enamel paint over a coat of primer to iron works including cost of all charges etc all complete. |
| 29 | Providing 2.5cm thick Grading Concrete (1:2:2) using 6mm cbhg chips including cost of all charges e.t.c. all complete. |
| 30 | Providing, supplying, fitting & fixing of stainless steel mosquito netting including cost of all charges e.t.c. all complete. |
| 31 | E.I WorkRecessed wiring to light/Fan/Exhaust fan/ Call bell pointwith 1.5 sq.mm FRLSH insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FRLSH insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Havels / V Guard )(a) Group-A |
| 32 | (b) Group-B |
| 33 | (c) Group-C |
| 34 | Recessed wiring to 5/6amp Plug pt. pointwith 1.5 sq.mm FRLSH insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FRLSH insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. S/F of 5/6A Switch & 3Pin 5/6A Socket On Existing Board.( Make of wire Finolex / L&T /V Guard ) |
| 35 | Recessed wiring to submain in the following sq.mm FRLSH insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FRLSH insulatedsingle core multistrand copper conductoras earth wire as required.(Make of wire-Finolex/L&T/Havells/V-Guard//HPL)(a) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm |
| 36 | (b) 2 x 2.5 sq.mm + 1 x 1.5 sq.mm (for S.B & C.B) |
| 37 | (d) 2 x 6 sq.mm + 1 x 1.5 sq. mm (for D.B box) |
| 38 | S/F of B.K angle holder |
| 39 | S/F of 20w LED tube light (Phillips/C.G/havells) |
| 40 | S/F of 15w LED bulb of reputed make Phillips or equivalent of CG/Havells as per direction Engineer-In-charge). |
| 41 | S/F of 48\" ceiling fan (usha striker equivalent of bajaj/orient as per direction Engineer-In-charge). |
| 42 | S/F of electronic type fan reguletor(C.G/Havells/Philips) |
| 43 | S/F of computer board (3nos plug & switch) |
| 44 | S/F of 45W LED street light (phlips/C.G/havells) |
| 45 | S/F of 300mm high speed exhaust fan with MS jally on outer side of wall on existing hole (bajaj/havells/CG) |
| 46 | S/F of 4way Double door SPN DB (make-L&T/Ligrand/Schnider) |
| 47 | S/F of 6A - 10A SP MCB for light fan circuit (make- Schneider/Ligrand/L&T) |
| 48 | S/F of 32A DP main switch on ms board(l&t,legrand,C&S) |
| 49 | S/F of No.6 GI wire earthing to mainswitch recessed wired with 20mm PVC conduit. |
| 50 | S/F of Standard G.I Pipe earthingas per direction of engineer-in-charge. |
| 51 | Supply of 16 sqmm 4 core allm.armed cable (Polycabe, Havells, KEI) |
| 52 | Laying of above cable on wall surface |
| 53 | Cable termination at both end of the cable with proper size cable socket |
| 54 | S/Fof63A TPN Cu busbar with steel encloser (L&T/HPL/Ligrand) |
| 55 | S/L of 10sqmm service wire on wall surface dully clipped with 20mm PVC conduit. |
| 56 | P.H WorksSupplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.20mm dia PVC ASTM pipe (sch-80) |
| 57 | 25mm dia PVC ASTM pipe (sch-80) |
| 58 | 32mm dia PVC ASTM pipe (sch-80) |
| 59 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge.15mm dia CP angle stop cock (Hindware/Cera/Amber make) |
| 60 | 15mm dia CP short body bib cock (Hindware/Cera/Amber make) |
| 61 | 25mm dia brassfull way valve (Shakti make) |
| 62 | 32mm dia brassfull way valve (Shakti make) |
| 63 | 15mm CP Extension piece |
| 64 | 125mm CP grating |
| 65 | 15mm size C.P. flange |
| 66 | Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge2000 liters capacityPVC water storage tank |
| 67 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge. |
| 68 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proofas per P.H. specification and direction of Engineer-in-charge |
| 69 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. |
| 70 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 71 | 110mm U-PVC‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 72 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 73 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 74 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 75 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 76 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 77 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 78 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI \"p\" or \"s\" trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.580mm size Orissa pan (Hindware/Parryware/Neycer make) |
| 79 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge.10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 80 | Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal |
| 81 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge550mmx400mm W.H.basin (Hindware make)with 15mm dia C.P.pillar cock (Plaza make) with |
| 82 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge25mmx600mm long CP towel rail |
| 83 | Towel ring |
| 84 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.600mmx125mm plate glass shelf with CP/NP guard rails. |
| 85 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.600mmx450mm size B.E mirror (swivelled type) |
| 86 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeCP soap holder |
| 87 | Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 88 | Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 89 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber ofinside size 760mmx760mmx460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-charge.Inside size 76cmx76cmx46cm with 18” dia RCC MH cover |
| 90 | Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.1x3.68mx1.50mx0.10m |
| 91 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.1x3.68mx1.50mx0.07m |
| 92 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 60cmx60cm special printed seriesto be pre-approved by the Engineer-in-charge )Kajaria/Somany/Johnson tile 60cmx60cm = 1x3.68mx1.50m |
| 93 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 94 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 60cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge )Kajaria/Somany/Johnson tile 60cmx30cm |
| 95 | Providing fitting, fixing of Aluminium door with anodized AL. door section of 9202 as vertical member,9201 as top and 9200 as middle bottom member with frame section No. 9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle No. 1855 Including all Cost of Labour. T&P hire charges of drilling machine. labour charges etc. complete. Ref : OBI10 |
| 96 | Supplying all materials labor T&P and fitting & fixing 40mm to50mm thick marble partition wall or screen wallincluding cutting grooves and mending good the damages with cement concrete (1:2:4) using 12mm size hard granite chipsincludingwatering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complate as per specification and direction of the Engineer in charge. 2x0.76mx1.22m |
| 97 | Supplying all materials labour T&P and constructing 1.80m dia x 2.60 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.5 Users septic tankof size 1.50m x 0.75m x 2.0m |
| 98 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge. |
| 99 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in chargewith 1st extra lift of 1.50 m over initial laft. |
| 100 | Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC. |
| 101 | Supplying all materials, labor T&P providing CC (1:3:6) with 4 cm HG metal including watering curing lead of all materials to site etc. complete. |
| 102 | Supplying all labor T&P &Providing C.C. (1:2:4)with 12mm size brokenhard granite chips including watering curing &lead of all materials to site etc. all complete. |
| 103 | ProvidingC.C. (1:1½:3) with 12mm size hard granite chips of RCC workincluding hoisting and laying and curing with leadof all materials to site. |
| 104 | Supplying all materials, T&P and providing MS reinforcement for RCC work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauges.0.25cum x 2.50 x 35.32= 22.07 kg say = |
| 105 | Rigid & smooth centering & sheltering for RCC work including falls work & dismantling than after casting including cost of materials in ground floor.RCC floor, roof slab chhaja up to 4.430 m height |
| 106 | Supplying all materials labour T&P and providing 1st class KB brick work in CM (1:3) in foundation and plinth including watering and curing and lead of materials to site. |
| 107 | Supplying all materials labour T&P and providing 12mm thick C.P (1:3) including watering curing and conveyance of all materials to site. |
| 108 | Supplying all materials labour T&P and providing cement punning including watering curing and conveyance of all materials to site. |
| 109 | Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification. |
