Tender For Construction Of Onion Market At Mattuthavani Vegetable Market In Ward No.33. 1 Removing The Damaged Corrugated Iron Sheet Roofing Over Pan Tiles, Without Roof Timbers Etc Complete ( Pwd Sor 2022-23 ) P.No:22 2 Earth Work Excavation For Foundation In Hard Stiff Clay, Stiff Black Cotton, Hard Red Earth, Shales Murram, Gravel, Stoney Earth And Earth Mixed With Small Size Boulders Ss.20B And Sand, Silt Or Other Loose Soil, Wet Sand, Or Silt Not Under Water, Light Black Cotton Soil, Sandy Loam Ordinary Soil And To Full Depth As May Be Directed Except In Hardrockrequiring Blasting Inclusive Of Shoring Shuttering And Baling Out Water And Cleaning And Levelling The Site Etc., Complete 10 Cumfor Column Footing 3 Grade Beam 4 Supplying And Filling In Foundation Andbasement With Filling Quarry Dust In Layers Of Not More Than 15Cm.Thick Well Rammed Watered And Compacted Etc., Complete Complying With Standard Specification. 5 Refilling With Excavated Earth In Layers Of 30 Cm Watered Well Rammed And Consolidatred Conforming To Standard Specification Including Labour Charges As Directed By Engineer In Charge 6 Plain Cement Concrete 1:4:8 ( One Cement Four Fine Aggregates And Eight Coarse Aggregates ) Using 40Mm Size Iss Hbg Metal Including Cost And Conveyance Of All Materials To Site And Including For The Mixing, Laying And Labour Charges And All Incidential Charges Such As Water Providing Etc., Complete As Per Standard Specification 7 Supplying And Filling In Foundation And Basement With Well Gravel In Layers Of Not More Than 15Cm Thick Well Rammed Watered And Compacted Etc., Complete Complying With Standard Specification. 8 Plain Cement Concrete 1:5:10 ( One Cement, Five Fine Aggregates And Ten Coarse Aggregates ) Using 40Mm Size Isshbg Metal Including Cost And Conveyance Of All Materials To Site And Including For The Mixing, Laying And Labour Charges Etc., Complete As Per Standard Specification 9 Supplying And Erecting Steel Centering Including Necessary Supports For Plane Surfaces For Reinforced Cement Concrete Works Such As Column Footings, Column Pedestals, Plinth Beams, Grade Beams, Staircase Steps, Etc. Which Require Only Nominal Strutting Using Mild Steel Sheets Of Size 90Cm X 60Cm And 10 Bg Stiffened With Welded Mild Steel Angles Of Size 25Mm X 25Mm X 3 Mm For Boarding, Laid Over Silver Oakjoists Of Size 10Cm X 6.5Cm Spaced At About 75Cm Centre To Centre Or At Suitable Intervals Etc. Complete In All Floors Complying With Standard Specifcation. ( Payment For Centering Shall Be Given After The Concrete Is Laid ) 10 Supplying And Erecting Centering For Sides And Soffits Including Necessary Supports And Strutting Upto 3.29 M Height For Plane Surfaces As Detailed Below In All Floors With All Cross Bracings Using Mild Steel Sheets Of Size 90 X 60 Cm And 10 Bg Stiffened With Welded Mild Steel Angle Of Size 25Mm X 25Mm X 3 Mm For Boarding Laid Over Silver Oak Joists Of Size 10Cm X 6.50 Cm Spaced At Abote 90 Cm Centre To Centre And Supported By Casurina Props Of 10Cm To 13 Cm Dia Spaced At Not More Than 75 Cm Centre To Centre Etc. Complete Complying With The Standard Specificaiton. ( Payment For Centering Shall Be Given After The Concrete Is Laid ) For Plane Surfaces Such As Rcc Floor Slab, Roof Slab, Beams, Lintels, Bed Blocks, Landing Slab, Waist Slab, Portico Slabs And Beams, Etc 11 For Plane Surfaces Such Asrectangular Or Square Rcc Columns, Sunshades, Top And Bottom Slab Of Rcc Boxing, Etc. 12 M-20 Concrete - Providing And Laying In Position, Standarised Design Mix M-20 Grade Using 20Mm And Down Graded Hard Broken Granite Stone Jelly For All Rcc Items Of Works With Minimum Cement Content Of350kg / M3 And Maximum Water Cement Ratio Of 0.55, Including Admixture ( Plasticiser / Super Plasticiser ) In Recommended Proportions Asper Is:9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability With About ( 5.70 Cu.M. ) 940.50Kg Of 20Mm Machine Crushed Stone Jelly And With About ( 2.80 Cu.M. ) 462.00Kg Of 10-12Mm Machine Crushed Jelly And With About ( 4.25 Cu.M. ) 701.25Kg Of Sand, But Excluding Cost Of Reinforcement Grill And Fabricating Charges, Centering And Shuttering And Also Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing, Etc And Providing Fixtures Like Fan Clamps In The Rcc Floor / Roof Slabs Wherever Neccessary Without Clambing Extra, Etc. Complete Complying With Standardspecification And As Directed By The Departmental Officers. The Coarse And Fine Aggregates To Be Used Should Comply With The Requierments Of Is 383- 2016. ( No Separate Payment Will Be Made By The Department For Theexces Usage Of Materials As Per Design Mix. ) ( Si No 81 ) Foundation 13 Ground Floor 14 Suppling And Fabricating And Placing In Position Ms ( Or ) R.T.S. Bar For Reinforcement To All Rcc Works As Per The Design Given Including Cost Ofsteel And Binding Wire Also In All Floors 15 Brick Work In Cm 1:5 ( One Cement & Five Sand ) Using Ii Class Ground Moulded Bricks Of Size 9X43 / 8X 2 3 / 4 Including Finishing, Curing, Etc., Complete Complying With Standard Specification - 100Cft 16 Plastering With Cement Mortar 1:3, 10 Mm , Thick In All Floors Including Cost And Conveyance Of All Materilas To Site And Labour Charges Etc, Complete As Per Standard Specifications ( S.I.306 ) 17 Plastering With Cement Mortar ( 1:5 ) 12Mm , Thick In All Floors Including Cost And Conveyance Of All Materilas To Site And Labour Charges Etc, Complete As Per Standard Specifications ( S.I.306 ) 18 Providing Granolithic Floor Finish Of 25Mm Thickness With Plain Cement Concrete 1:2:4 ( One Cement, Two Crushed Sand ( M-Sand ) And Four Aggregate ) Using 10 To 12Mm Gauge Hard Broken Stone Jelly Including Laying, Finishing And The Top Rubbed Smooth With Power Trawl, Thread Lining, Curing Etc. Complete Complying With Standard Specification And As Directed By The Departmental Officers. ( The Rate Is Inclusive Of Necessary Planking For Panellingwherever Necessary And As Directed By The Departmental Officers ) 19 Paving The Floor With Design Antiskirt Ceramic Tiles ( Colour And Shade As Directed ) Of Size 305 Mm X 305Mm X 6 Mm In All Floors Over A Base Layer Of Cement Mortar 1:3 ( One Part Of Cement And Three Part Of Plastering Sand ( P- Sand ) ) , 20Mm Thick Laid In-Situ And Pointed With Same Coloured Cement 20 Dadooing Walls Withglazed Tiles Of Sizes 305Mm X 200Mm X 6Mm Size Of Approved Make And Quality And Colour Set In Cement Mortar 1:2 ( One Part Of Cement And Two Part Of Plastering Sand ( P- Sand ) ) Over 10 Mm Base Layer Plastering And Pointing With White Cement Neatly As Directed. 21 White Washing Two Coats With Freshly Burnt Shell Lime White In Colour In All Floors Including Cost Of Lime And Other Materials Brushes Scaffolding Charges Etc.Complete Complying With Standard Specification And As Directed. -100Sq.M S.I.333 22 Painting Two Coats For Interior Surface With Approved Interior Plastic Emulsion Paint Approved Quality And Colour Over A Priming Coat, Including Thorough Scrapping, Clean Removal Of Dirt, Etc Complete And Including Necessary Plaster Of Paris, Putty, Wherever Required Etc, Complete As Per Standard Specification. 23 Painting Two Coats For Exterior Surface With Approved Exterior Plastic Emulsion Paint Approved Quality And Colour Over A Priming Coat, Including Thorough Scrapping, Clean Removal Of Dirt, Etc Complete And Including Necessary Plaster Of Paris, Putty, Wherever Required Etc, Complete As Per Standard Specification. 24 Providing Upvc ( Un-Plasticized Polyvinyl Chloride ) Door: Providing And Fixing Casement Doors Fabricated From Unplasticized Polyvinyl Chloride ( Upvc ) Sections. Profiles: The Profiles Should Be Three Chamber System Which Provides High Insulation Properties With Outer Frame60mm X 55Mm With An Outer Wall Thickness Of 2.4Mm.The Window Unit Should Be Designed With All Corner Joints Mitred And Fusion Welded. Windows Should Besteel Reinforced With 25 X 24 X 25Mm Steel Reinforcement With A Thickness Of 1Mm To Have Dimensional Stability. The Sash Should Be Of 60 X 102Mm. The Mullion Should Be Of 60 X 74Mm. The Profiles Should Have Co-Extruded Seals. Hardware: All The Hardware Like Friction Stays, Handles Should Be Screwed With Self Tapping Screws. The Handles, Locks Should Be Designed So That They Cannot Be Releasedfrom Outside. Glazing: The Window System Should Be Glazed With 5Mm Plain Float Glass / 6Mm Bison Lam Installation: The Profiles Should Be Cut To Length And Welded 45 Degrees. The Window Should Be Designed Such That The Water Drainage Does Not Pass Through The Reinforcement Chamber. The Window System Should Be Fixed Directly To The Plastered Brick Wall Using Self Expanding Nylon Plug And Drivingms Electroplated Screws Into Plug Etc Completed As Standard Specification ( Pwd Sor 2022-23 P.No:65 ) 25 Upvc Ventilatorspecification: Supplying And Fixing Upvc ( Un-Plasticized Polyvinyl Chloride ) Louvered Ventilators Of From The Profile The Size Of Outer Frame 60Mm X 58Mm And Shutter Profile Size Of 60 X 78Mm Both Profiles Are Reinforced With Gi / 1Mm 125Gsm And 100% Corrosion Free, The Profile Are Multi Chambered Sections With Wall Thick Of 2Mm. The Epdm Rubber ( Black Colour ) Covered With All Over Theedges Of Frame And Shutter. The Corners And Joints Should Be Welded And Cleaned. Radiations Pin Headed Glass 4Mm Thick Shouldbe Provided In The Louvers. The Window Should Be Fixed To The Wall With 100% Packing With Screws And Silicon Packing All Round The Frames. The Ventilator Should Be Got Approved From The Executive Engineer Before Use On Work Pwd Sor Pg. No. 60 Sl.No.270 26 Upvc Windowspecification: Supplying And Fixing Upvc ( Un-Plasticized Polyvinyl Chloride ) Windows Of Casement Type ( Open ) From The Profile The Size Of Outer Frame 60Mm X 58Mm And Shutter Profile Are Reinforcement With Gi / 1Mm 125Gsm And 100% Corrosion Free, The Profiles Are Multi Chambered Sections With Wall Thick Of 2Mm. The Epdm Rubber ( Black Colour ) Covered With Over All The Edges Of Frame And Shutter The Shutter Will Be Provided With Espag Multi Power Point Locks And Also It Operates As Handle. The Corners And Joints Should Be Welded And Cleaned. Radiations Free Pin Headed Plain Or Brown Colour Glass 4Mm Thick Should Be Provided To The Shutter And It Should Not Allow Leakage Of Water Even At Most Ranging Storms And Should Have Key Lockable Action, Security Protective Hinges, Strong Locking Systems And As Per Size For Arresting Noise And Energy Loss. The Connecting Mechanism Between Sash And Outer Frame That Enables Opening Of The Window.The Window Should Be Fixed To The Wall With 100% Packing With Screws And Silicon Packing All Round The Frames. The Window Should Be Got Approved From The Executive Engineer Before Use On Work ( Pwd Sor 2020-2021, P.No 60, Si.No 270 ) 27 Weathering Course With Concrete Broken Brick ( S.I.No.278 ) & ( P & D ) Data 54.Jelly 20Mm Gauge In Pure Slaked Lime ( No Sand To Be Added ) Over Roof Slab, The Proportion Of Brick Jelly To Lime Being 32 To 12.5 Well Beated With Wooden Beaters For Giving Required Slope And Thickness As Directed By The Departmental Officers Etc., Complete.-10 Cum 28 Finishing The Top Of Roof With One Course Of Machine Pressed Tiles Of Size 200 Mm X 200 Mm X 20 Mm Of Approved Quality In Cement Mortar 1:3 ( One Cement Add Three Sand ) 12 Mm Thick Mixed With Water Proofing Compound Conforming To Iss At 2% By Weight Of Cement Used And The Joints Pointed Neatly To Full Depth Of Tiles With The Same Cement Mortar Mixed With Red Oxide And Water Proofing Compound Including Curing Etc., Complete 29 Manufacturing, Supplying And Fixing Of Stainless Steel Hand Rails For Staircase Using 50Mm Dia 304L Grade Stainless Steel Pipe Of 1.60Mm Thick At Required Locations To A Height Of 900Mm From Finished Floor Level Welded To 38Mm Dia Stainless Steel Pipe Post Of 1.00Mm Thick As Vertical At 900Mm Centre With 2 Nos. Of 25Mm Dia Intermediate Horizontal Stainless Steel Pipe Of 1.60Mm Thick In Between. The Vertical Pipe Has To Be Welded To The 100 X 100 X 6Mm Ms Base Plate Encased In The Base Concrete. The Rate Is Inclusive Of The Charges For Cutting, Bending, Welding, Grinding, Polishing, Conveyance, Electrical Charges, Etc. Complete Pwd Sor Pg. No. 63 Sl.No. 239 30 Supplying And Fixing Of Rolling Shutters Shall Be Pull And Push Type ( Gear Operated ) Made Of 18G / 3 Lathe Sections Which Consist Of Five Main Parts Such As Curtain, Lock Plate, Guide Channels Rollers And Hood Cover. These Five Main Parts Are Made Out Of Special Components Detailed Below: Curtain Shall Be Of 18G / 3 Lath Sections Cut To Required Size And Filled With Heavy Cast Iron / Ms Clips. For 80 ( 2.45M ) High Rolling Shutter Lath Sections Provided Shall Be Not Less Than 37 Numbers. Lock Plate Shall Be 10Gms Sheet And Attached To The Side Brackets With 20Mm Square Bar.Side Brackets Shall Be Of 10G Ms Plate And Cast Iron U Clamps Shall Be Rivetted To The Side Brackets. Roller Shall Be Of Heavy Cast Iron Pullies Fitted With Heavy Duty C Class 40Mm Steel Pipe And High Tensile High Carbon Coil Springs. 2 Springs Shall Be Supplied. Side Brackets Shall Be Of 10G Ms Plate And Cast Iron U Clamps Shall Be Rivetted To The Side Brackets. Roller Shall Be Of Heavy Cast Iron Pullies Fitted With Heavy Duty C Class 40Mm Steel Pipe And High Tensile High Arbon Coil Springs - 2 Springs Shall Be Supplied. Hood Cover Shall Be Of 0.8Mm Crca Sheet Reinforced With 25Mmx25mmx3mm Ms Angle Or Gate Channel. The Rolling Shutter In Addition To The Above Should Have Pulling Hook And Shall Be Coated On Exposed Area With Heavy Coat Of Red Oxide Primer Etc., Complete. 31 Providing & Fixing Pvc Rain Water Down Fall Pipe Of The Following Dia With Necessary T.W.Clamps Plugs, Shoes, Bemds, Other Clamps, Screws Nails Etc., Complete Complying With Standard Specification. The Rate Is Inclusive Of Cost Of Removable Iron Gratings Of Appropriate Size. The Size Of Teak Wood Plugs Used Is 150X25mm In Front & 200X75mm In Rear ( Wall Side ) With A Depth Of 110Mm. The Pipe Is To Be Fixed By Means Of U Clamps At The Centre Of Pipes To Be Fixed.110Mm Dia Pvc Pipe [ 4 Kg / Sqcm ] ( D ) 32 Supplying And Fixing In Position Best Quality P.V.C Soil / Waste Pipes ( 6Ksc ) Of Various Sizes Having Isi Mark And Providing Leakproof Joints Including Fixing To The Wall With P.V.C / M.S Clamps Etc., And Making Connection To All Sanitaryfittings, Dismandling Masonry / R.C.C. Works Wherever Necessary And Making Good The Dismandled Portion To The Original Condition, Complying With Standard Specifications. ( D ) 110Mm Dia Pipe 33 Supplying And Fixing Of 1000 Litters Capacity Pvc Tank Of Approved Quality Including Cost Of All Materials Like Tank Fittings, Lead .Lift, Errection Etc Complete. Pwd Sor Pgno:50 ( 1000 Litres ) 34 Supplying And Fixing In Position First Quality And Approved Variety Of Gun Metal Gate Valve ( Heavy Type ) With I.S.I.Mark Of The Following Sizes Including Cost Of Shellac , Thread Etc, .Including Labour For Cutting And Threading Of G.I.Pipes Etc., Complete Complying With Standard Specifications For Both Internal And External Water Supply Arrangements. ( D ) 25Mm Gun Metal Valve 35 32Mm Gun Metal Valve 36 Suppling And Fixing In Position15mm.Diameter Brass / C.P Screw Down Tap / Pillar Tap ( Heavy Duty ) Of Approved Make Conforming To I.S.Specifications And Quality Including Cost Of Shellac, Thread Etc.Complying With Standard Specifications And Including Cutting And Threading Wherever Necessary ( D ) Sd Tap 37 Pillar Tap 38 P.V.C. Pipes ( 10Kg / Sqcm ) Supplying Laying And Jointing P.V.C Pipes ( 10Kg / Sqcm ) Of Approved Quality And Best Variety Conforming To I.S.S & With I.S.I Mark, Of The Following Sizes Including Cutting , Fixing To Pvc Specials Using Adhesive But Excluding Cost Of Such Specials And Fixing To Wall With Necessary Teak - Wood Plugs, Pvc Clamps And Screws, Making Holes On The Wall Or Drilling Holes In Roof And Making Good The Dismantled Portions To Original Condition With Necessary Brick Work And Plastering Wherever Necessary With Necessaryscaffolding Charges. ( D ) 25Mm Dia Pipe 39 32Mm Dia Pipe 40 Supplying Pvc Specials ( With Working Pressure 10 Kg. / Sq.Cm. ) In Water Supply Arrangements ( Both In Internal And External Water Supply Arrangements Pwd Sor Pg.No:99 Si.No:367Coupler25mm Pipe 41 32Mm Pipe 42 Elbow25mm Pipe 43 32Mm Pipe 44 Bend25mm Pipe 45 32Mm Pipe 46 Tee25mm Pipe 47 32Mm Pipe 48 End Cap25mm Pipe 49 32Mm Pipe 50 Reducer25 Mm X 20 Mm 51 32 Mm X 25 Mm 52 Reducer Tee25 Mm X 20 Mm 53 32 Mm X 25 Mm 54 Reducer Elbow25 Mm X 20 Mm 55 32 Mm X 25 Mm 56 Jet Nipple25mm Pipe 57 32Mm Pipe 58 Supplying And Fixing In Position Pvc Specials Of The Following Dia And Types Of Approved Quality Confirming To Bis And Providing Leak Proof Joints Including Fixing To The Walls And Giving Connection To The Pvc Soil Stacks, Dismantling The Masonry Or Rcc Works And Re- Doing The Dismantled Portion To Original Condition Etc., Complete Complying With Standard Specifications. ( The Pvc Specials Should Be Got Approved By The Executive Engineer Before Use On Works ) . ( D ) Pvc Elbow110mm Dia 59 Pvc Elbow With Door110mm Dia 60 Pvc Tee110mm Dia 61 Pvc Tee With Single Door110mm Dia 62 Supplying And Fixing In Position Best Quality Approved Make White Glazed Earthenware Wash Hand Basin Of Size 550 X 400 Mm With A Pair Of Cast Iron Brackets, Including Cost Of 15Mm Diametre Brass Chromium Plated Piller Tape, 32 Mm Diametre C.P. Waste Union, 32 Mm Diametre P.V.C. Waste Pipe With Rubber Plug And Chain, 15Mm Diametre G.M.Wheel Valve, 15Mm Dia Brass Nipple, 15Mm Dia Nylon Connections Etc., Including Fixing The Wash Hand Basin In The Wall In Position With A Pair Of C.I. Brackets With Teak Wood Plugs And Screws And Giving Necessary Water Supply Connection And Paintiung The Brackets With Two Coats Of Paint Over A Primimg Coat Of Anticorrosive Paint Including Testing For Leackage Etc., Complete Complying With Standard Specifications ( D ) 63 Providing Rain Water Harvesting Using 3 Nos.Of Rcc Well Rings Of 90Cm Inner Dia ( Clear ) With 5Cm Wall Thickness Made Out Of Cement Concrete 1:2:4 Using 20Mm Hard Broken Jelly To A Height Of 30Cm Each Supplying And Fabricating 16 Nos. Of 6Mm Dia Ms Rod Vertically And 3 Nos. Of 6Mm Dia Ms Rod Circumferentially Tied Together With 18 Guage Binding Wire For Well Rings Including Necessary Earth Work Excavation 1M Dia Toa Depth Of 1M, Supplying And Filling 40Mm Hbg Inside The Erected Well Ring To A Depth Of 90Cm, And Topcovered With Rcc Circular Perforated Cover Slab Of 1M Dia And 5Cm Thick Which Inclusive Of Cost And Fabrication Of 6Mm M.S Reinforcement At 15 Cm Spacings On Both Directions And One 6Mm M.S Rod Ties At The Edge Of The Slab Circumferentially Including Cost Of Moulding, Curing, Finishing And Well Placing In Position And Disposing Off Excavated Earth With All Initial Leads And Lifts In Places As Shown By The Departmneal Officers Etc., Complete In All Respects. 64 Supplying And Fixing In Position Indian Water Closet Of Size 580 X 440Mm, White Glazed Earthen Ware Of Approved Quality With P Trap Or S Trap Confirming To Is:2556 -Part Xii With Sand Cushion And Forming Flooring Alround The Closet Using 40Mm Broken Brick Jelly In Lime Concrete1:2:5 ( One Part Of Lime, Two Parts Of Sand And Five Parts Of Brick Jelly ) 100Mm Thick And Finishing The Top To Required Slope And Including Giving Necessary Connection To Cast Iron Soil Pipes / Pvc Pipes By Dismandling Brick Masonry, Reinforced Cement Concrete Roof / Floor Slab And Making Good The Disturbed Portion To Original Condition Without Leakage Etc., Complete Complying With Standard Specifications And As Directed By The Departmental Officers. 65 Supply And Fixing Of Pvc. Nahini / Floor Trap With Stainless Steel Gratings- 100 Mm X 75 Mm Including All Charges Etc, Complete As Per Standard Specification. ( D ) 66 Supplying, Fabricating, Erecting Structural Steel Work For Roofing Welded Or Bolted Type Using Ms Channels, Angles, Plates And Round Bars Etc. Conforming To Is Specification Including Primer Coating And Enamal Painting As Per Design Given By The Departmental Officers Etc, Complete As Per Standard Specification 67 Fabricating Supplying And Fixing Of Pre Painted Galvanium Colour Sheets With The Following Specification. The Materials Should Be Of Ppgi Tile Profile With A Red Colour Or Any Other Approved Design 0.47 Mm Thick 24 Guage Having Width 1050 Mm. The Sheet Should Be G.I.Base Pre Painted Hot Dipped Galvanized Iron Sheet And To Be Fixed With Shelf Tapping Screws, Plastic Washer.The Washer And Screws To Be Fixed By Using Minute Power Machine Drilled With Out Damaging The Sheets Paint Coating To Be Regular Modified Polyster Coat With Zinc Coating Of Z 120 Gsm Paint Thickness The Finish Should Be Terra Cotta Finish Like Malabar Mangalore Tiles Finish Optional Matt Finish. The Sheet To Be Fixed With Making Suitable Corrugated, Cutting The Sheet In To The Required Ssize And Making Ornamental Designs As Per The Site Condition And As Directed By The Departmental Officers. 68 Manufacturing And Fixing In Position Rcc Precast Slab In C.C.1:1.5:3, Using 20Mm Hbgs Machine Crushed Jelly Of Following Thickness, Excluding Cost Of Reinforcement Grill But Including Moulding, Finishing, Curing And Fixing In Position Etc.Complete. ( 100Mm Tk ) 69 Conducting Geological Survey To Fix Borewell Point Etc., Complete 70 Supply Of 150Mm Dia P.V.C Casing Pipe As Per Is 12818 / 2010 ( Outer Casing ) 71 Labour Charges For The Erection Of Submerisble Pumpset In Borewell / Openwell Including Fixing And Jointing Submersible Cable With Proper Clamps Upto The Starter To Required Depth And Also Fixing Of Riser Pipes To The Required Depth Valves Erection Clamps, Pressure Gauges Upto The Exterior Wall Of Pump Room And Erection Of Panel Board Consisting Of Tpicn Switches Starter, Voltmeter , Ammeter , Three Pilot ( Indicating ) Lamps Capacitor Single Phasing Preventor , Water Level Guard And Laying And Jointing The Cables And Twin Earthing As Per Ie Rules Etc., Complete And Testing The Pumpset And Trail Run For 10 Days 72 Drilling 150Mm Dia Vertical Bore In Hard Rock To Any Required As Directed By Corporation Officers Including Charges For Drilling And Water Required For Drilling And Fuel ( Drilling Of Borewell Inside Well 150Mm Dia. ) 73 Charges For Developing The Borewell With Air Compressor Of 300 Cfm Capacity ( Minimum 8 Hours ) Including Transportation Labour And Fuel Charges For Compressor As Directed By Officers And Conducting Yield Test By ‘V’ Notch Method. 74 Supply And Delivery Of Clear Water Vertical Wet Type Submersible Pumpset Suitable For 150Mm Dia Borewell Conforming To Is 8034 / 2002 With Latest Amendments And Bee 3 Star Rated Capable Of Discharging Noted Lbm Against Head Of Water Column Due To All Causes.The Pump Shall Be With Stainless Steel Shaft And Dynamically Balanced Bronze Or Cast Ss Impeller, Brass Screws And Ci Fg 200 Grade Pump Bowl / Difuser With Isi Mark.The Pump Shall Be Directly Coupled To A Continuous Rated Two Pole Suitable Wet Type Vertical Squirrel Cage Induction Motor As Per Is 9283 Suitable For Operation In Ac 3 Phase 415 V+ / - 10 % , 50 Hz + / -5% Duty ( 50 Lpm X 100M ) Three Phase Submersible Pumpset Suitable For 150Mm Dia Borewell As Per Is 8034 / 2002 Witout Panel Board 75 Supply And Delivery Of Direct Online Starter Confirming To Isi 13947 And Iec 947 Suitable Kw Rating For Operation In Ac / Single Phase / 50Hz ( + 5% ) And 415 V ( +-10% ) Including Ammeter, Voltmeter , Thermal , Overload Relay , 16Amps 2 Pole Magnetic Contactor With Under Voltage Protection , Indication Lamp, Starting Capacitor, Running Capacitor And On / Off Push Button Switches, 5 Way Connector , Wiring With 1Sq.Mm / 1.5Sq.Mm Copper Pvc Insulated Cable, Powder Coated Vermin Proof Box Including The Capacitor ( The Costy Of Capacitor Is To Be Taken Separately ) Etc.Complete.Three Phase Panel Board - D.O.L With Two Level Guard And Auto Start ( 3Hp Submerible Pumpset ) 76 Supply Of Pvc Pipe Sand Gi Pipes And Specials.32Mm Upvc Pipe 77 32Mm G.M Gatevalves 78 32Mm Gi Adopter 79 32Mm Gi Hex Nipple 80 32Mm Gi Union 81 32Mm G.I Elbow 82 32Mm G.I Tee 83 32Mm G.I Pipe 84 32Mm G.I.Couplings 85 32Mm Clamp Set 86 150Mm Bore Well Cover 87 Nylon Rope 88 Supply And Delivery Of Pvc Insulated And Sheathed 3.00 Core Flat Type 4.00 Sq Mm Copper Cable Conforming To Is 694 / 1990 Suitable For Submersible Pump Set Of Standard Specification 89 Earthling As Per Lsl Specification With An Earth Electrode Of 2.1Mt ClassB Gl Pipe Of Dia Not Less Than 40Mm And With 20Mm Dia Copper Earth Flat Of Size 125Mm X50mmx6mm, With Funneling Anangement Using Charcoal, Common Salt, G.L.Reducer, Check Nuts Etc., And Masonry Work And Providing Rcc Cover Slab 38Mm Thick For The Brick Masonry Including Cost Of Steel And Fabrication Of Reinforcement Etc., Complete In All Respects As Directed By The Departmental Otflcers. ( Sd 233 ) 90 Supplying And Run Off I Swg Copper Wire On Walls Or Below Ground Level With NecessaryU Nails, Earth Work Ex€Vation And Refilling & Including The Most Of All Materials Etc., Complete In All Respec { S As Directed By The Departmental Otfimrs. ( Sd 75 ) 91 Supplying And Fixing Of 3 Phase Db With Mcb 12 Way Tpmcb Sheet Steel Distribution Boards ( Flush Type / Surface Type ) Fitted With Bus Bars And Neulral Links With Three Phase Mcb Outgoings And Separate 4 Way Provision For Accommodating One No. 4 Pile Incoming Mcb / Lsolator And Another Separate 4 Way Provision For Accommodating One No. 4 Pole Elcb / Rcd ( Totally I Ways In One Segment ) ( 3 X 4 Ways In Each Segment ) And Separate Provisions For Mcb / Lsolalor ( Tolally 12 Nos. ) For Sub Incomers In 3 Segments With Label Holder Etc.Complete In All Respects As Directed By The Departmental Officers 92 Supply And Run Off 2 Of 2.50Sqm Pvc Insulated Single Core Unsheathed Copper Conductor Cable Of 1100 V Grade With Lsl Mark Confirming To 13:694 / 1990 With Continuous Earth Connection By Means Of , .50 Sqm Pvc Insulated Single Core Unsheathed Copper Conductor Cable Confirming To 15:694 / 1990 In Suitable Pvc Rigid Pipe L.8Mm Thick Concealed In Wall For Mains Including The Cost Of Pvc Pipes And Specials, Cables, Cement, Brass Screws, T.W Plugs, Saddles And Labour Etc., Complete In All Respecis As Direcled By The Deparlmental Officers. 93 Supply And Run Off 2 Of 1.5 Sqmm Pvc Insulated Single Core Unsheathedcopper Conductor Cable Of 1100 V Grade With Lsl Mark Confirming To15:694 / 1990 With Continious Earth Connection By Means Of 1.50 Sqmpvc Insulated Single Core Unsheathed Copper Conductor Cable Confirming To 15:694 / 1990 In Suitable Pvc Rigid Pipe 1.8Mm Thick Concealed In Wall For Mains Including The Cost Of Pvc Pipes And Specials, Cables, Cement, Brass Screws, T.W Plugs, Saddles And Labour Etc., Complete In All Respects As Directed By The Departemental Officers. 94 Supply And Fixing Of Tneb Meter Board Suitable For 32 A Three Phaseservice Connectionwith32afuse Unit ( 500V } 32Aneukallinkandearthlink ( 1X1 / 8 Copperflat ) On T.W Plankof Size 600Mmx450mmx 19Mm With Supportingt.W.Keepers Of 1“ Thick Oneither Sider Withpainting Withsuilable Bolt Andnuts For Fixingthetw Plankon Wall Withaarthconnbcdonand Interconnectionwith7 / 20Pvcinsulatedoopperwire From Ebmeter To Fuse Unil Sd 127 ) 95 Supplyandrun Of4core 16Sq.Mmpvc Armoured Cableof 1100 V Grade With Isf Mark. ( Part E R ) V 96 Supplyandrun Of4 Core 10 Sq.Mmpvc Armoured Cableof 1100 V Grade With Isi Mark. ( Part E C ) V 97 Wiringwith2x1.5Sqmm { 22 / 0.3 ) Pvcinsulated Singlecoreunsheathedcopperconductorcableof 1100V Grade In Suitable Pvcrigid Pipe Conoealadin Wall And Ceiling With Pvc Accessories Induch With Wall 52 With 3Mm Thick Hylum Sheet Cover With Tw Switch Box And 5A F.T. Switch With Continuous Earth Wire Connection Of 14 Swg Tc Wire For Making Good Of The Concealed Portion With Suitable ¢Olour For Pvc Concaal6dlightpoint / Fanpoint ( Forelectronic Regulator ) . Sd 23 98 Wiringwith2x 1.5Sqmm ( 22 / 0.3 ) Pvcinsulated Singlecoreunsheathedcopperconductor Cableof 1100Vgrade Insuitablepvcrigid Pipe Concealed In Wall And Ceiling With Pvc Accessories Iri1fush With Wallsawith150x 100X 113Mm Twswitchbox With3mm Hylumsheetcoverfor5a3 Pin Non Inter Locking Cs Plug With Continuous Earth Wire Connection Of 14 Swg Tcwireandmakinggoodoftheconcealedportion Withsuitablecolourforconcealedpvcplugpain!. Sd 38 99 Supply And Fixing Fot 18 W Led Tube Light For T 8 Fitting ( Single Side ) 100 Supply And Fixing Of Ac Exhaust Fan 300 Mm ( 12” ) Sweep ( Light Duty ) Including Cost Of All Materials, / Abour, Lead, Lift, Etc Complete 101 Supply And Fixing Of 1200Mm ( 48 ) Sweep Ac Ceiling Fan Complete With Stepped Electronic 300W Regulator With The Existing Down Rod On The Existing Clamps. ( Sd 110 ) 102 Supplying And Fixing Of 120W Led Street Light With Led ( Outdoor Fittings ) Cost And Conveyance For Labour Charges Etc Complete As Per Standard Specification ( Pwd Sor 2022-23 P.No:45 ) 103 Earthwork Excavation In All Kinds Of Soils Except Hard Rock Requiring Blasting, Inclusive Of Shoring, Strutting And Baling Out Water Wherever Necessary Refilling The Sides Of Foundation With Excavated Earth In Layers Of 15Cm Thick Well Rammed And Consolidated Depositing The Surplus Earth Within Compound In Places As Shown By The Deptl.Officers, Clearing And Leveling The Site With Initial Lead Of 10M And Lift Of 2M Etc.Comp. 104 Supplying And Filling In Foundation And Basement With Stone Dust In Layers Of 15Cm. Thick Well Rammed And Consolidated Including Watering Complying Withstandard Specification Etc. Complete 105 Cement Concrete 1:4:8 ( One Cement Four Sand And Eight Aggregate ) Using 40 Mm Gauge Hard Broken Granite Jelly For Foundation Including Consolidationdewatering For Foundation Wherever Necessary Etc, Complete 106 Supplying And Erecting Shuttering With Necessary Supports For Plith Beam With All Cross Brancings Etc.., Complete ( Rcc Coloumn Footing Plinth Beam And Lintel Sides ) 107 Plain Cement Concrete 1:1.5:3 ( One Cement, One And Half Fine Aggregates And Three Coarse Aggregates ) Using 20Mm Size Isshbg Metal Including Cost And Conveyance Of All Materials To Site And Including For The Mixing, Laying And Labour Charges Etc., Complete Asper Standard Specification 108 Manufacturing And Fixing In Position Rcc Precast Slab In C.C.1:1.5:3, Using 20Mm Hbgs Machine Crushed Jelly Of Following Thickness, Excluding Cost Of Reinforcement Grill But Including Moulding, Finishing, Curing And Fixing In Position Etc.Complete. ( 75Mm Tk ) 109 Providing And Laying, Spreading And Compacting Graded Stone Aggregates To Wet Mix Macadam Specification Including Premixing The Materials With Water At Omc In Mechnanical Mix Plant Carriage Of Mixed Material By Tipper To Site Laying In Uniform Layers With Pavers In Sub Base / Base Course On Well Prepared Surface And Compacting With Vibratory Roller To Acheive The Desired Density Including Cost Of Material, Labour Charges, Rentals For Machinery, Fuel And All Other Incidental Charges Etc., Complete As Per Clause 406 Of Morth Rev-5 110 Supplying And Erecting Steel Centering Including Necessary Supports For Plane Surfaces For Reinforced Cement Concrete Works Such As Column Footings, Column Pedestals, Plinth Beams, Grade Beams, Staircase Steps, Etc. Which Require Only Nominal Strutting Using Mild Steel Sheets Of Size 90Cm X 60Cm And 10 Bg Stiffened With Welded Mild Steel Angles Of Size 25Mm X 25Mm X 3 Mm For Boarding, Laid Over Silver Oakjoists Of Size 10Cm X 6.5Cm Spaced At About 75Cm Centre To Centre Or At Suitable Intervals Etc. Complete In All Floors Complying With Standard Specifcation. ( Payment For Centering Shall Be Given After The Concrete Is Laid ) 111 Providing And Fixing Bitumen Pad For Expansion Joint In Between Pavement Slabs To 12Mm Thick And Fixed As Shown In The Drawing Including Cost And Conveyence Of Expansion Joints Including Shalimar Pad And Joint Sealent Etc, Complete As Per Standard Specification Bitumen Pad 12Mm Thick 112 Plain Cement Concrete 1:1.5:3 ( One Part Of Cement, One And Half Part Of Crushed Sand ( M- Sand ) , Three Coarse Aggregates ) Using 20Mm Size Iss Hbg Metal Including Cost And Conveyance Of All Materials To Site And Including For The Mixing, Laying And Labour Charges Etc., Complete As Per Standard Specification 113 Suppling And Fabricating And Placing In Position Ms ( Or ) R.T.S. Bar For Reinforcement To All Rcc Works As Per The Design Given Including Cost Ofsteel And Binding Wire Also In All Floors 114 Gst 18%
