|
| 1 | Demolishing / Dismantling reinforced cement concrete / plain cement concrete and disposing of debris upto to a lead of 2 km including loading, unloading and spreading as directed by Engineer-In-Charge etc., complete. All as directed by Engineer-In-Charge. |
| 2 | Removal / Dismantling of existing roof / side cladding of AC / Non-asbestos, Galvalume Sheets roofing, louvers side cladding, North light curves, ridges, flashings, North light glazings etc., at all heights and elevations including loading, transportation, unloading etc., within the premises up to a lead of 2 km as directed by Engineer-In-Charge. |
| 3 | Dismantling steel work in built-up sections in angles, tees, flats, channels etc., including all guest plates, bolts, cutting rivets, welding etc., at all heights and elevations including dismembering and stacking within 2 km lead. |
| 4 | Demolishing / Dismantling of brick work in cement mortar manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material up to a lead of 2 km as per direction of Engineer-In-Charge. |
| 5 | Demolishing / Dismantling of old plaster or skirting raking out joints on all surfaces and cleaning the surface for plaster including disposal of rubbish to the dumping ground within a lead of 50 m as per direction of Engineer-In-Charge. |
| 6 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material up to a lead of 2 km as directed and stacking of serviceable material within 50 meters lead as directed by Engineer-In-Charge. |
| 7 | Earth work in excavation in all soils by mechanical means (Hydraulic Excavators) / manual means in foundations trenches or drains (all depths) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. All as directed by Engineer-In-Charge. |
| 8 | Conveyance of excavated soil including all kinds of loose debris up to a lead of 2 km, including loading, unloading and spreading etc. complete as directed by Engineer-In-Charge. |
| 9 | Providing and laying in position Plain Cement Concrete of specified grade excluding the cost of centering and shuttering including consolidation by vibrations for all works at all elevations with 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate of 20 mm nominal size).(Only cement will be issued by BHEL on free of cost at BHEL store.) |
| 10 | Providing and laying in positionspecified grade of Reinforced / Plain Cement Concrete excluding the cost of centering, shuttering, finishing and reinforcement at all elevations with 1 : 1½ : 3 (1 cement : 1½ coarse sand : 3 graded stone aggregate of 20 mm nominal size).(Only cement will be issued by BHEL on free of cost at BHEL stores.) |
| 11 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and bindinggrills with binding wire all complete by cold twisted bars / TMT Bars of Fe 500 or above grade. (Only Steel Reinforcement will be issued by BHEL on FREE of cost at BHEL stores.) |
| 12 | Centering and shuttering including scaffolding, strutting, propping etc.; and removal of form work, for foundations, footings, columns, beams, slabs at all elevations & heights etc.,All as directed by Engineer-In-Charge. |
| 13 | Charges for providing & fixing double Scaffolding System (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc., and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-In-Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.Note: This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.All piping materials, fixtures, clamps and other incidentals are in Contractor scope.(Only One time payment shall be made for providing Scaffolding system from start of work till completion of work including shifting if any, to other locations of the Factory and reused for several times in the Contract period. The Scaffolding pipe and required clamps & fixtures shall be arranged by the contractor at his own cost and can be taken out of Factory after completion of work on Returnable basis). |
| 14 | Providing and fixing Scaffolding safety net of required width made of high density Polyethylene UV stabilized knitted on warp knitting machines having density 100gm/Sqm and shading coefficient minimum 75% around the construction site/ for vertical extension as per requirement including fastening/tying with building/scaffolding pipes or with any other fixtures etc., complete as per direction of Engineer-In-Charge. All materials, fixtures and other incidentals are in Contractor scope.(Only One time payment shall be made for providing Scaffolding net from start of work till completion of work including shifting if any, to other locations of the Factory and reused for several times in the Contract period. The Scaffolding safety net shall be the property of the contractor on completion of the work.) |
| 15 | Brick work withGround moulded clay FPS brick in super structure above plinth level upto floor five level in cement mortar 1:6 (1 cement :6 Coarse sand). Cost includes placing two 6 / 8 mm dia MS round / Ribbed steel bars in every fourth layer in case of half brick wall. Cost of placing steel bars shall be paid separately under steel reinforcement.(Only cement and steel reinforcement will be issued by BHEL on free of cost at BHEL stores.) |
| 16 | Plastering in CM 1:6, 20 mm thick to internal and external surfaces of walls, ceiling including the cost of all materials, labour, curing etc., complete - at all heights and elevations. (Only cement will be issued by BHEL on free of cost at BHEL Stores.) |
| 17 | Plastering in CM 1:4, 12 mm thick to internal and external surfaces of walls, ceiling including the cost of all materials, labour, curing etc., complete - at all heights and elevations.(Only cement will be issued by BHEL on free of cost at BHEL Stores.) |
| 18 | Extra for providing and mixing water proofing material in cement plaster work / concrete work in proportion recommended by the manufacturers. |
| 19 | Fabrication of Structural Steel work including all materials going into the process of fabrication and forming an integralpart of steel work together with all shop and site rivets and electrodes for site welding as necessary and all site connections comprising sag rods, floor beams, girders, bracings, trusses and frame work for fixed false ceiling and for movable false ceiling, purlins with channel / angles, MS flat supports including all connections as per detailed drawings connected steel works etc., cleats, gusset plates, all bolts, nuts, washers, base plates, anchor bolts as per detailed drawings, cutting, welding and painting 2 coats of red-oxide primer before erection etc., complete.The rate shall include painting 2 coat of Red-oxide primer as per IS specifications and all charges for handling, leading and loading at the fabrication yard. (Required electrodes, gasseswill be issued by BHEL on FREE of cost at BHEL stores.) |
| 20 | Required raw structural steel sections will be issued by BHEL onFREE of cost at BHEL stores.Remaining all other materials are under contractor scope. |
| 21 | All materials including required Structural steel are under contractor scope. |
| 22 | Erection of Steel work at all heights and elevations out lined item at above including the charges for handling, leading and stacking at site at approved locations prior to erection including all site rivetting, bolting, jointing and site welding where ever required. |
| 23 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-In-Charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns at all heights. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-In-Charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.All materials, fixtures, clamps, J/L hooks & bolts, screws, tools & tackles and all other incidentals required for the work are in Contractor scope. |
| 24 | Providing and fixing Non-Asbestos sheets high impact Polypropylene reinforced cement 6 mm thick corrugated sheets (as per IS: 14871) Roofing, North light curves, Flashings, Ridges and other specials suitable to the sheeting works etc. up to any pitch and fixing with polymer coatedJ, or L hooks & bolts including cutting sheets to size and shape wherever required. The profile should match with the existing roof sheeting and as approved by Engineer-in-charge and all related parameters is to be matched is as per IS 14871. The test certificate pertaining to for breaking load test is to be submitted by the agency from the reputed lab for approval and also all other test and pitch and heightof corrugation physical characteristics is as per IS 14871 etc. complete all as directed by Engineer-in-charge. The work is to be carried out above 20 m height etc. complete all as directed by Engineer-in-charge.Before quoting the agencies are advised to study the all parameters of the roof sheeting work in IS 14871.Make: Charminar or any approved makeAll materials, fixures, clamps, screws, J/L hooks & bolts, tools & tackles and all other incidentals required for the work are in Contractor scope. |
| 25 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per Sq.m as per IS: 277, in 240 MPa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling / self tapping screws complete at all heights.All materials, fixtures, clamps, screws, J/L hooks & bolts, tools & tackles and all other incidentals required for the work are in Contractor scope. |
| 26 | Ridges plain (500 - 600mm) |
| 27 | Flashings / Aprons (upto 600 mm) |
| 28 | North light curves |
| 29 | Barge board (upto 300 mm) |
| 30 | Crimp curve |
| 31 | Gutter (600 mm over all girth) |
| 32 | Supplying and fixing of Fibre Reinforced acrylic roofing sheets 3mm thick of light blue/white shade & of approved brand to match with Roofing sheet at all heights including cost of all materials such as self-driven bolts, nuts, washers etc. and fixing at all heights of the factory blocks etc., complete all as directed by Engineer-In-Charge.All materials, fixures, clamps, J/L hooks & bolts, screws, tools & tackles and all other incidentals required for the work are in Contractor scope. |
| 33 | Supply and fixing of 5 mm thick Multi wall polycarbonate sheets and anodised aluminium glazing bars together with complete accessories for North light glazing of factory blocks at all heights and elevations including cost of all materials labour etc. complete all as directed by Engineer-In-Charge.All materials, fixtures, clamps, J/L hooks & bolts, screws, tools & tackles and all other incidentals required for the work are in Contractor scope. |
| 34 | Providing and fixing in true horizontal level 600 mm x 600 mm false ceiling system using DUNE SUPREME RH 99 MICROLOOK EDGE WITH SILHOUETTE GRID, using hot dipped galvanized steel section, rotary stitched main tee of size 15mm x 42 mm web height, having 0.36 mm gauge at every 600 mm centre to centre maximum and rotary stitched cross tee of size 15 mm x 42 mm, having 0.33 mm gauge at every 600 mm. c/c. and wall angle of size 19 x 19 mm., having 0.35 mm gauge fixed to the periphery of the wall. The above grid is suspended at every 600mm c/c. in both directions using 2.0 mm. thick pre-straightened GI wire, and laying Dune Supreme Microlook Edge ceiling tilesof size 600mmx600mmx15mm having NRC 0.50, Light reflectance of >85% (WT), thermal conductivity k = 0.052-0.057 W/m0K, Humidity Resistance of 99% (having LIFETIME GUARANTEE against SAG), having Fire Performance CLASS O / CLASS 1 (BS 476), surface having 3 coats of white paint - crisp finely granulated with microperforations, back of thetile duly sanded with a coat of protective paint over the formed grid and complete in all respect, Boards where light fixtures to be fixed shall be handed over to Department.All material are in Contractor\"s scope. |
| 35 | Supply and Finishing with Epoxy paint (two or more coats) at all locations, heights, prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface etc., complete as directed by Engineer-In-Charge, including scrapping old / new surfaces. All materials, scaffolding and other incidentals are in Contractor scope. |
| 36 | on Steel Surface (approx. 1MT of steel = 41.8 Sq.m of surface area is considered for measurement). |
| 37 | on Concrete Surface. |
| 38 | Supply and Applying one or more coats with 1st quality acrylic Distemper (Ready mix) having VOC content less than 50 grams/litre of approved brand and required shade to give an even shade on old & new surfaces at all heights of the buildings, Shop Annexes including thorough cleaning & scraping the old surfaces, and cost also includes of all labour, scaffolding, supply & applying primer for new surface and all other incidentals.OBD, scaffolding and all other materials are in Contractor scopeMake: Nerolac / Berger / Indigo |
| 39 | Supply and Applying two or more coats with Acrylic Smooth Exterior Paint of required shade applied at 1.67 litres / 10 Sq.mon old & new surfaces at all heights of the buildings, Shop Annexes including thorough cleaning & scraping the old surfaces, and cost also includes of all labour, scaffolding, supply & applying primer for new surface and all other incidentals -OBD, scaffolding and all other incidentals are in Contractor scopeMake: Nerolac / Berger / Indigo |
| 40 | Supply and Applying two or more coats Painting with Synthetic Enamel / Aluminium paint of required shade applied at 4.85 litres / 1MT[or 1.16x41.8/10 = 4.85] to give an even shade on old & new surfaces at all heights of all material surfaces including thorough cleaning & scraping the old surfaces, and cost also includes of all labour, scaffolding and all other incidentals -.(Enamel Paint / Aluminium Paint and all materials, scaffolding and other incidentals are in Contractor scope)Make: Asian / Nerolac / Berger / Indigo(approx. 1MT of steel = 41.8 Sq.m of surface area is considered for measurement and paint applied at 1.16 litres per 10 Sq.m surface area). |
| 41 | Supply and Applying two or more coats Painting with Synthetic Enamel / Aluminium paint of required shade applied at 1.16 litres / 10 Sq.m to give an even shade on old & new surfaces at all heights of all material surfaces including thorough cleaning & scraping the old surfaces, and cost also includes of all labour, scaffolding and all other incidentals -.(Enamel Paint / Aluminium Paint, scaffolding and other incidentals are in Contractor scope)Make: Asian / Nerolac / Berger / Indigo |
| 42 | Supply and Applying Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade including thorough cleaning & scraping and cost also includes of all labour, scaffolding and all other incidentals -Two or more coats on old / new work(All materials, scaffolding and other incidentals are in Contractor scope) |
| 43 | Supply and Applying ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work / galvanised steel work including scrapping and removal of rust & corrosion scales upto the satisfaction of Engineer-In-Charge.(All materials, scaffolding and other incidentals are in Contractor scope) |
| 44 | Supplying and Applying High performance, pigmented aliphatic acrylic, chloride ion and carbonation protective and decorative coating for concrete and masonry uses, Fosroc®, Dekguard S or equivalent material exterior wall paint of approved shade, 2-coats after thorough cleaning of the existing or newly plastered surface complete satisfaction of the Engineer-In-Charge.(All materials, scaffolding and other incidentals are in Contractor scope) |
| 45 | Supplying and fixing plain PVC pipe with 6 kg/Sq. cm of approved quality with specials, accessories like fixing clamps and approved sealing / jointing compound on the exterior of the inserted portion of the fitting and fixing in position and joining to MS gutters etc., including cost of all materials, sealing compound, labour, scaffolding etc., for all heights complete.Make: Prince / Sudhakar / Nandi |
| 46 | 200 mm dia PVC pipe of 6 kg/Sq. cm |
| 47 | 160 mm dia PVC pipe of 6 kg/Sq. cm |
| 48 | Chipping of unsound / weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge |
| 49 | 75 mm average thickness |
| 50 | 50 mm average thickness |
| 51 | 25 mm average thickness |
| 52 | Cleaning of reinforcement from rust from the reinforcing bars at all heights to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. |
| 53 | Bars upto and equal to 12 mm diameter |
| 54 | Bars above 12 mm diameter |
| 55 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-Charge complete in all respect.Only cement will be issued by BHELon free of cost at BHEL store. |
| 56 | SBR (Styrene Butadiene Rubber) Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per Sq.m of surface area mixed with specified proportion of approved polymer. |
| 57 | Epoxy bonding adhesive having coverage 2.20 Sq.m/kg of approved make. |
| 58 | Providing, mixing and applying SBR (Styrene Butadiene Rubber) polymer (of approved make @ minimum 2% by wt. of cement used) modified plain / reinforced cement concrete for all structural members (including for jacketing) having minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness.Note: Rates shall be for finished surface area of concrete and shall include the cost of labour, concrete and appropriate approved Super-Plasticiser for rendering concrete as flowable and SBR (Styrene Butadiene Rubber) polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument)Only cement will be issued by BHELon free of cost at BHEL store. |
| 59 | 50 mm thick in Grade M 25 with cement content not less than 330 kg per Cu.m |
| 60 | 75 mm thick in Grade M 25 with cement content not less than 330 kg per Cu.m |
| 61 | 100 mm thick in Grade M 25 with cement content not less than 330 kg per Cu.m |
| 62 | Providing, mixing and applying SBR (Styrene Butadiene Rubber) polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-In-Charge.Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sq.mm).Only Cement will be issued by BHEL free of cost at BHEL stores. |
| 63 | 12 mm average thickness. |
| 64 | 25 mm average total thickness in 2 layers. |
| 65 | 50 mm average total thickness in 3 layers. |
| 66 | Providing and fixing Rabbit / Chicken Mesh in position asdirected by Engineer-In-Charge |
| 67 | Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100 mm upto 200 mm in RCC beams, lintels, columns and slabs etc., to introduce steel bars for sunshades / balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge.Upto and including 12mm dia.All materials including grout and all other incidentals except Steel reinforcement are in Contractor scope.Required Steel reinforcement only will be issued by BHEL free of cost at BHEL stores. |
| 68 | Providing, erecting, maintaining and removing temporary protective screens made out of specified fabric (Woven PVC cloth) with all necessary fixing arrangement to ensure that it remains in position for the work duration as required by the Engineer-In-Charge. |
| 69 | Providing and injecting approved grout in proportion recommended by the manufacturer into cracks / honey-comb area of concrete / masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-In-Charge.Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made with Shrinkage Compensating Cement in concrete / RCC work.All materials including other incidentals except OPC are in Contractor scope.Required OPC only shall be issued by BHEL free of cost at BHEL stores. |
| 70 | Welding of St. Steel / Steel Reinforcement as directed by Engineer-In-ChargeStructural Steel / Steel Reinforcement and welding rods only shall be issued by BHEL free of cost at BHEL stores. |
| 71 | Installation of Anchor Bolts as directed by the Engineer-In-Charge.Anchor Bolts shall be issued by BHEL on free of cost at BHEL stores. |
| 72 | Grouting of bolt pockets with Grout Mix of specified proportion by the manufacturer, including cost of labourand incidentals etc.Only Grout Mix shall be issued by BHEL on free of cost at BHEL stores. |
| 73 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size), including water proofing compound, as per manufacturer\"s instruction, complete as directed by Engineer-In-Charge.(Only cement will be issued by BHELon free of cost at BHEL Stores) |
| 74 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per Sq.m on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. |
| 75 | Conducting Non-destructive testing by means of \"Rebound Hammer\" / \"Ultrasonic Pulse velocity\" test including supply of equipment, scaffolding, testing, supplying report all complete as per the instruction of the Engineer-In-Charge. |
| 76 | Repairing of damaged beams, columns, slabs of RCC structures upto 45 m height from ground by:(i) Removing loose / spalled concrete by chipping the concrete surface to expose the reinforcement bars;(ii) Cleaning of exposed reinforcing bars by removing traces and scales using wire brush/emily paper;(iii) Applying of Epoxy rich Zinc primer (Make: Sika Permacor 2311 rapid or BASF Zinc rich rebar primer) of 40 micron thickness;(iv) Applying of Epoxy resin bonding agent (Make: Sika Top Armatec 110 EPO CHEM or BASF EMACO P24) tothe prepared concrete surface;(v) Applying of Polymer modified concrete of grade M40 (Make: Sika Mono Top 622/623 or BASF EMACO FS) over epoxy resin bonding agent.The rate includes cost of all materials except cement, tools and machinery required to carry out the above work all complete as per the direction and complete satisfaction of the Engineer-in-charge.(Only required cement shall be issed by BHEL on free of cost at BHEL stores.) |
| 77 | Corrosion inhibitor coating to RCC structures including lead and lift, men and material etc., complete as per specification, standard practice or as directed by the Engineer-in-Charge.Make of Corrosion inhibitor: Fosroc / Sika / BASF. |
