Bids Are Invited For Required Civil Work-1 Item No. 01 Providing And Fixing 15 Mm Thick False Ceiling Tiles At All Heights With Integral Dandified Calcium Silicate Reinforced With Fibre And Natural Filler False Ceiling Tiles Of Size 595X595 Mm Of Approved Texture, Design And Patterns Having Nrc ( Noise Reduction Coefficient ) Of 0.50 ( Minimum ) As Per Is 8225:1987, Light Reflectance Of 85% ( Minimum ) . Non Combustible As Per Bs:476 ( Part-4 ) , Fire Performance As Per Bs:476 ( Part 6 &7 ) , Humidity Resistance Of 100%, Thermal Conductivity < 0.043 W / M K As Per Astm 518:1991, In True Horizontal Level On The Existing Frame Work Consisting Of T-Sections And Lections Suitably Fixed According To Tile Size As Per Direction Of Engineer-In-Charge. 2 Item No. 02 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia. And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Panelling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing, Panelling And Dash Fasteners To Be Paid For Separately ) : Polyester Powder Coated Aluminium ( Minimum Thickness Of Polyester Powder Coating 50 Micron ) 3 Item No. 03 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia. And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Panelling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing, Panelling And Dash Fasteners To Be Paid For Separately ) : For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required ( Fittings Shall Be Paid For Separately ) Polyester Powder Coated Aluminium ( Minimum Thickness Of Polyester Powder Coating 50 Micron ) Providing And Fixing 12 Mm Thick Pre-Laminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminium Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer-In- Charge. Pre-Laminated Particle Board With Decorative Lamination On One Side And Balancing Lamination On Other Side Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge. ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item ) :With Float Glass Panes Of 5 Mm Thickness ( Weight Not Less Than 12.50 Kg / Sqm ) Providing And Fixing 150 Mm Bright Finished Floor Brass Door Stopper With Rubber Cushion, Necessary Brass Screws Etc. To Suit Shutter Thickness Complete Providing And Fixing Aluminium Die Cast Body Tubular Type Universal Hydraulic Door Closer ( Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Up To 35 Kg And Door Width Up To 700 Mm ) , With Necessary Accessories And Screws Etc. Complete. Steel Work In Built Up Tubular ( Round, Square Or Rectangular Hollow Tubes Etc. ) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. Hot Finished Seamless Type Tubes ( Rectangular 49.5 X 49.5 X 4.5 Mm @5.95 Kg / M Pipe For Length 36.60 M As Per Is:4923-1997 ) Providing Corrugated G.S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Diameter With Bitumen And G.I. Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Up To Any Pitch In Horizontal / Vertical Or Curved Surfaces ) , Excluding The Cost Of Purloins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 0.63 Mm Thick With Zinc Coating Not Less Than 275 Gm / M² Wiring For Light Point / Fan Point / Exhaust Fan Point / Call Bell Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Steel Conduit With Piano Type Switch, Phenolic Laminated Sheet, Suitable Size Ms Box And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Group B Wiring For Light / Power Plug With 2X4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit Along With 1 No. 4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable For Loop Earthing As Required. Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface / Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. 25 Mm Supplying And Fixing Following Sizes / Modules, Gi Box Along With Modular Base And Cover Plate For Modular Switches In Recess Etc. As Required. 12 Module Supplying And Fixing Following Sizes / Modules, Gi Box Along With Modular Base And Cover Plate For Modular Switches In Recess Etc. As Required. 8 Module Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plates Etc. As Required. 5 / 6 A Switch Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plates Etc. As Required. 15 / 16 A Switch Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plates Etc. As Required. 3 Pin 5 / 6 A Socket Outlet Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plates Etc. As Required. 6 Pin 15 / 16 A Socket Outlet Supplying And Fixing 5A To 32A Rating, 240 / 415 V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inducive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Double Pole Supplying And Fixing Of Following Ways Surface / Recess Mounting, Vertical Type, 415V, Tpn Mcb Distribution Board Of Steel Sheet, Dust Protected, Duly Powdered Painted, Inclusive Of 200 A Tinted Copper Bus Bar, Common Neutral Link, Earth Bar, Tin Bar For Mounting Mcbs ( But Without Mcbs And Incomer ) As Required. 4Way ( 4=12 ) , Double Door
