Providing & Fixing False Ceiling At All Height And Levels Consisting Of (A)Main System: Providing & Fixing Of Framework Approved Make , Made Of Special Section, Power Pressed From M.S. Sheets And Galvanised With Zinc Coating Of 120 Gms/ Sqm ( Both Side In, mumbai-Maharashtra

False Ceiling Providing & Fixing False Ceiling At All Height And Levels Consisting Of ( A ) Main System: Providing & Fixing Of Framework Approved Make , Made Of Special Section, Power Pressed From M.S. Sheets And Galvanised With Zinc Coating Of 120 Gms / Sqm ( Both Side Inclusive ) As Per Is : 277 And Consisting Of Angle Cleat Of Size 25Mm Wide X 1.6Mm Thick With Flanges Of 27Mm And 37Mm, At 1200Mm C / C, One Flange Fixed To The Ceiling With Dash Fastener 8Mm Dia X 50Mm Long With 6Mm Dia Bolts As Per Item No.1 Of Part Ii 2 2 False Ceiling -Do- As Per Item No., 1 But On Areas Where Supporting System Has Been Installed In Plan Area Except For Calcium Silicate Board. Rate Quoted Shall Be Inclusive Of Providing Necessary Support For Vertical Drops, Minor Rectification Of The Supporting System Etc. Complete. 3 3 False Ceiling -Do- As Per Item No., 1 But For Areas Where Calcium Silicate Board Has Been Installed In Place. Rate Quoted Shall Be For Providing Finishing At The Joints Of The Boards, Providing Provisions For Grills, Lights Etc. Complete To Obtain A Final Finishing As Envisaged In Item No. 1 Of This Price Bid. Mode Of Measurement: Net Plan Area Of The Finished Board Shall Be Measured For Payment Purpose. No Additional Payment Shall Be Considered For Finishing Of Vertical Drops, Coves Etc. As The Rate For Which Shall Be Considered In Inclusive In The Quoted Rate 4 4 Trap Doors Providing And Fixing In Position Trap Doors Of Required Size In Guest Rooms, Locations Of Butterfly Valve For Fire Line, Fire Sensor Locations Etc. As Per Following Specification:A ) Trap Door Made Up Of 12Mm Thick Marine Ply Having Teak Wood Lipping Of Size 35X15mm Duly Rebated To Rest On Existing False Ceiling As Shown In Detail Drawing Of Trap Door And Specifications. The Underside Of The Marine Ply To Have 12Mm Calcium Silicate Board To Have Same Surface And Finish On Exposed Side As Adjoining False Ceiling. The Item Includes Gi Edge Bead, Necessary Hardware Hinges, Locks Etc. Complete All Floor Height And Level Using Necessary Scaffoldings As Per Detail Drawings And Direction Of The Engineer-In Charge. 5 5 Wooden Box Providing And Fixing Wooden Box For Cassette Ac Already Fabricated And Kept At Site With Adequate Supporting System Gi Channels All Around And Exposed Veneer Shall Be Provided With Mm Thick Approved Veneer With Melamine Polish In Approved Shade / Texture Complete As Per Drawings And As Directed By Engineer-In-Charge 6 6 Pvc False Ceiling Supply And Fixing Of Moisture And Fire Resistant Pvc False Ceiling With Hidden Perforations Along With The Necessary Edge And Intermediate Connectors / Trims As Per Manufacturer Specification To Be Used For Soffit Of Balcony Ceilings At All Floors. Necessary Gi Support System Shall Be With Zinc Coating Of 120 Gms / Sqm ( Both Side Inclusive ) As Per Is : 277, Consisting Of 0.5 Mm Thick X Bottom Wedge Of 80 Mm X 26Mm Tapered Edge With Lips Of 10.5 Mm, At 450 Mm Centre To Centre Directly Connected To Perimeter Channel 0.50Mm Thick 27Mm High Having Flanges Of 20Mm And 30Mm Long. Rate Quoted Shall Be Inclusive Of Providing Provisions Of Necessary Light Fittings And For Using Necessary Scaffoldings As Per Item No.6 Of Part Ii 7 7 Metal Ceiling Metal Ceiling: Providing And Fixing Gi Tegular Laying Plain Metal Ceiling With 600X600mm Laying Tiles Of 0.5Mm Thickness And Provided With 120Gsm Galvanized Steel As Per Is 277 In 60-80Micron Powder Coated In Global White Colour. Tiles Shall Have Min. Light Reflectance Of 63% And Fire Performance Of Class 0 / 1 As Per Bs 476. All Border Tiles Shall Be Provided With End Caps For Installation To Have Tegular Effect. Suspension System ( Main Runner And Cross Ties ) Shall With 24Mm Wide T Section With Web Height 38Mm Made From Galvanised Steel With Baked Polyester Shade Matching With The Tiles Including Double Rotary Stitching And Slotted Provisions For Interconnections Of Main And Cross Ties As Per Item No.7 Of Part Ii 8 8 Cgst Enter Total Cgst 9 9 Sgst Enter Total Sgst

Refer document

Refer document

Refer document