Tender For Stage Contract For Routine Maintenance And Repairs Civil / Sanitary Works Including Face Lifting , Scientific Cleaning & Sterilization Of Water Storage Of Tanks , Roll Of Honor Boards And Display Of Name Plates Etc At High Court Complex Sri, Srinagar-Jammu And Kashmir

TDR : 37590253

Tender Notice
Corrigendum Details
BOQ

Expired

Srinagar , Jammu And Kashmir

Tender Brief : Corrigendum : Tender For Stage Contract For Routine Maintenance And Repairs Civil / Sanitary Works Including Face Lifting , Scientific Cleaning & Sterilization Of Water Storage Of Tanks , Roll Of Honor Boards And Display Of Name Plates Etc At High Court Complex Sri

Document Fees
₹ 1100 /-

EMD
₹ 100000.0 /-

Tender Value
₹ 50 Lakhs /-

Submission Date
18-05-2023

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	15-05-2023	Extension of time	Date	18-05-2023

Name of Work: Stage contract for Routinemaintenance and repairs civil / sanitary works including face lifting , Scientific cleaning & sterilization of water storage of tanks , Roll of Honor Boards and display of Name plates etc at High Court Complex Srinagar for the Year 2023-2024.

Sl. No.	Item Description
1	Engagement of Skilled and un-skilled labors .
2	Mazdoor.
3	Carpenter 1st class.
4	Carpenter 2nd class
5	Mason 1st class.
6	Mason 2nd class.
7	Plumber.
8	Black Smith.
9	Earth work in excavation by manual means in trenches forfoundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:(All kinds of soil)
10	Providing and laying in position cement concrete of specified grade of mix 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including curing and carriages of material involved but excluding the cost of centring and shuttering.
11	Providing and laying in position cement concrete of specified grade of mix 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including curing and carriages of material involved but excluding the cost of centring and shuttering.
12	Providing and laying in position cement concrete of specified grade of mix1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including curing and carriages of material involved but excluding the cost of centring and shuttering.
13	Providing and laying in position specified grade of reinforced cement concrete of mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including curing and carriages of material involved but excluding the cost of centering, shuttering, finishing and reinforcement.
14	Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size)including all carriages and curing complete.
15	Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) including all carriages and curing complete.
16	Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)including all carriages
17	Providing and laying cement concrete of mix1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone agg. 20 mmnominal size) Crushed in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curingand all carriages of material involved but excluding the cost of centring, shuttering and finishingcomplete.
18	Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)including all carriages
19	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo-Mechanically Treated bars of grade Fe-500D or more including carriages complete.
20	Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete
21	Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position andapplying a priming coat of approved steel primer, including welding andbolted with special shaped washers etc. complete.Hot finished seamless type tubes
22	Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
23	Centering and shuttering including strutting, propping etc. and removal of form work for:
24	Foundations, footings, bases of columns etc. for mass concrete.
25	Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
26	Suspended floors, roofs, landings, balconies and access platforms.
27	Lintel, beams, plinth beams, girders, bressumers and cantilevers.
28	Columns, pillars, piers, abutments, posts and struts.
29	Stairs (excluding landings) except spiral staircases.
30	Edges of slabs and breaks in floors and walls Under 20 cm wide
31	Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation /plinth & Super Structure including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) carriages involved complete
32	Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in superstructureincluding curing and carriages complete in : Cement mortar 1:3 ( 1 cement : 3 coarse sand)
33	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) Ist class imported wood.
34	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) Ist class Deodar wood.
35	Providing wood work in frames of false ceiling, partitions etc sawn and fixed in position budloo/fir wood complete as directed
36	Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. First class kail wood -35mm thick
37	Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First class kail wood 35mm thick
38	Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
39	Providing and fixing 32 mm thick paneled door shutters, including ISI marked black enameled M.S. butt hinges with necessary screws including paneling of 12mm thick decorative Nova pan board both sides laminated as per the approved design complete with required beading/moldings. (styles and rails shall be of standard size) in fittings First. Class imported wood.
40	Providing and fixing 32mm thick paneled door shutters, including ISI marked black enameled M.S. butt hinges with necessary screws including cost of 25-35mm thick paneling of approved design with required beading/moldings. First. Class imported wood.
41	Providing and fixing 32 mm thick paneled door shutters, including ISI marked black enameled M.S. butt hinges with necessary screws Readymade ornamental modular, factory manufactured machine made of hard wood teak finished, of approved quality, color and shade.
42	Providing and fixing 32 mm thick paneled door shutters, including ISI marked black enameled M.S. butt hinges with necessary screws including paneling of 12mm thick ply decorative both sides laminated board as per the approved design with complete with required beading/moldings. (styles and rails shall be of standard size) First. Class imported wood.
43	Providing hoisting and fixing trusses / purlins / rafters / posts, post plates, in planks and any sort of work or like components, including cost of screws nails etc. complete. First. Class Budloowood.
44	Providing hoisting and fixing trusses / purlins / rafters / posts, post plates, in planks and any sort of work or like components, including cost of screws nails etc. complete. First. Class imported wood.
45	Providing hoisting and fixing trusses / purlins / rafters / posts, post plates, in planks and any sort of work or like components, including cost of screws nails etc. complete. First class Popular wood.
46	Providing and fixing of wooden paneling/ lining of 12mm (net thickness) including providing and fixing of ground frame work (50x25mm or as specified) of first class Budloo wood including cost of screws, wooden plugs etc. complete as per directions of EIC
47	made from export wood
48	made from BUDLOO wood
49	Providing and fixing of KHATAM BANDI ceiling of first class budloo/ fir wood excluding the cost of frame work which is to be paid separately
50	Changez Khani
51	Chaar Gul
52	Chaar Phool
53	Pahal Gardan
54	Dawaz-dal-i-girde
55	Paanch Murabah
56	Providing and fixing of ply wood including cost of nails adhesive etc. complete at all places.
57	4 mm thick
58	6 mm thick
59	12 mm thick
60	19 mm thick
61	Providing and fixing water proof BWR/ BWP ply wood ISI marked including cost of nails adhesive etc. complete at all places.
62	6 mm thick
63	12 mm thick
64	19 mm thick
65	Providing and fixing of single side laminated ply wood including cost of nails adhesive etc. complete at all places.
66	6 mm thick
67	12 mm thick
68	18 mm thick
69	Providing and fixing of 19mm thick commercial block board at all places including cost of nails and adhesive complete. Thickness/ Pattern/ Design to be approved by EIC.
70	Providing and fixing of 1mm thick Dulmica/ sun mica sheeting including cost of nails and adhesive complete.
71	Providing and fixing of ornamental cornice of following size.1st class budloo/imported wood.
72	40-50 mm face
73	65 mm face
74	75 mm face
75	Providing and fixing of PVC edge beading of size 25x25mm
76	Providing and fixing 20mm thick overlapped weather boarding in soffits of 1st class imported wood including applying priming coat of approved quality primer.
77	Providing and fixing of planed eaves boarding 250mm x 32mm size of 1st Class imported wood.
78	Providing and fixing of planed eaves boarding 250mm x 32mm size of 1st Class Budloo wood.
79	Providing and fixing of planed eaves boarding 250mm x 32mm size of 1st Class Kail wood.
80	Providing and fixing of wooden beading ornamental 25mmx6mm size of Budloo wood.
81	Providing and fixing of wire gauze using galvanized M.S wire gauze of average width for aperture 1.4mm with wire of dia. 0.63mm for doors windows and clearstory windows including cost of beading complete.
82	Providing and fixing of MS Mesh 25x25mmwherever required of specified size including cost of beading and nails complete.
83	Providing and fixing of glass panes with wooden fillets of required size wherever necessary.
84	Glass panes 3.5mm thick weighing 8.70 Kg / sqm.
85	Glass panes 4.0 mm thick weighing 10.0Kg / sqm.
86	Glass panes 5mm thick weighing 12.5 Kg / sqm.
87	Providing and fixing of reflective glass panes 4 / 3.5 mm thick in doors windows and clearstory windows including cost of budloo wood beading of required size.
88	Providing & fixing corrugated G.S. sheet roofing fixed with nails with bitumen and G.I limpet washers /self-drilling screws with washers/J- Hooks (up to a pitch of 60 degree) excluding the cost of purlins rafters and trusses
89	0.63 mm thick with zinc coating not less than 275 gm./Sqm
90	0.50 mm thick with zinc coating not less than 275 gm./Sqm
91	Providing & fixingcoated galvalume Hi-rib profile sheets 0.50 mm TCT having a crest height of 28-32mm at 195mm pitch using self drilling and selftapping fasteners of reputed make withpurlins sheet using self drilling and self tapping fasteners incl. ridges/ hips and valleys(including cost of all material, leads, lifts and carriages etc upto site of work complete) with required head loadcomplete..
92	Providing ridges/ valleys or hips of width 60cm over all width plain G.I sheet fixed with nails G.I limpet washers complete 0.63 mm thick with Zinc coating not less than 275 gm./Sqm
93	Providing ridges/ valleys or hips of width 60cm over all width plain G.I sheet fixed with nails G.I limpet washers complete 0.50 mm thick with Zinc coating not less than 275 gm./Sqm
94	Providing ridges/ valleys or hips of width 60cm over all width plain Colour coated sheets fixed with nails, G.I limpet washers complete0.50 mm thick
95	Providing and fixing Tiled/GRID false ceiling of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paintpaint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
96	10-12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard manufactured from natural gypsum as per IS 2095 part-I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.
97	10-12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fiber conforming to IS: 2095 part-I, of size 595x595 mm, having perforation of9.7x9.7 mm at 19.4 mm c/c with center borders of 48mm and the side borders of 30 mm, (or as per directions of EIC) backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.
98	8 mm thick fully perforated Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/cm2, bending strength 100 kg/cm2, of size 595x595 mm, having perforation of dia. 10mm with minimum perforated area 18% with non-woven tissue on the back side, having an NRC (Noise Reduction Certificate) of 0.85, with 50 mm thick rock wool of 48 kg/cum backing.
99	Providing and fixing at all height false ceiling including frame work made of special sections power pressed from M.S. sheet and galvanized in accordance with zine coating of grade 350 as per IS: 277 and consisting of angle cleats of size 25mm wide × 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm din x 40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm e to G.channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every SQM junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long. the perimeter of ceiling fixed to wall/partition including jointing and fixing to a fush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part I
100	Removing of damaged and providing and fixing at all height false ceiling incl. frame work made of special sections power pressed from MS Sheet and galvanized in accordance with zinc coating of grade 350 as per IS :277 and consisting of angle clents of size 2mm wide x1.60mm thick flanges of 22mm and 37mm at 1200 center to centre one flange fixed to ceiling with dash fastener 12.5mm x 40 mm long with 6mm diabolts to the angle hangers of 25x25x0.55 of required length and other end of angle hanger being fixed with nut and bolts to Gi channels 45x15x0.9mm running at the rate of 1200mm center to center to which the ceiling section 0.50mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450 center to center shall be fixed in direction perndular to Gl channel with connecting clips made out of 2.64mm dia x 230mm long GI SOM wire at every junction incl.fixing the gypsum board with ceiling section and perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long ,the perimeter of ceiling fixed to wall /partition with the help of rawl plugs at 4500101 center to center with 250101 long drive all screws @ 2300101 interval incljointing and fixing to a flush finish of tapered and squre edges of the board with recommended filler Jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also incl. the cost of making openings for light fittings ,grills diffusers all complete as per drawings and specifications 12.5mm thick tapered edge gypsum board incl all primer and painting complete job
101	Providing and fixing of acoustic insulation with 24 gauge G.I net wire netting mesh or frame with G.I stipules etc.
102	50mm thick filled in polythene bags.
103	100mm thick filled in polythene bags.
104	150mm thick filled in polythene bags.
105	Providing and fixing of jute fabric as per approved sample with bituminous paint complete.
106	Cement concrete flooring 1:2:4 (1Cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and carriagesbut excluding cost of nosing of steps etc. complete.
107	40 mm thick 20mm nominal size stone aggregate (crushed)
108	50 mm thick 20mm nominal size stone aggregate (crushed)
109	Providing and fixing 1st quality ceramic glazed Digital tiles conforming to IS: 13753 of minimum thickness 5mm of approved make in all colors, shades, except burgundy, bottle green, black of any size as approved by Engineer In Charge in skirting, riser of steps and dados over 12mm thick bed of cement mortar 1:3 (1 Cement: 3 coarse sand) and jointing with grey cement slurry @3.3 Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete.
110	Providing and fixing 1st quality ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufacturer) of 1st quality conforming of IS :13755 of NITCO, ORIENT, SOMANY, KAJARIA, make in all colors, such as white, Ivory, Grey, Fume Red Brown or as approved by Engineer In Charge over 20mm thick bed of cement mortar 1:4 (1 Cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete
111	Providing and fixing 1st quality Vitrifiedfloor tiles 600x600mm (thickness to be specified by the manufacturer) of 1st quality conforming of IS :13755 of NITCO, ORIENT, SOMANY, KAJARIA, make in all colors, such as white, Ivory, Grey, Fume Red Brown or as approved by Engineer In Charge over 20mm thick bed of cement mortar 1:4 (1 Cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete
112	Providing and fixing of Interlocking/Chequered precast cement concrete tiles colored(rubber finish) in foot paths & courtyards jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and cleaning etc. complete on 20mm thick layer of dry sand .
113	40mm thick.
114	50mm thick.
115	75mm thick.
116	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete
117	Size of tile 500x500 mm
118	Size of tile 600x600 mm
119	Size of tile 800x800 mm
120	Size of tile 1000x1000 mm
121	Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based highpolymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints
122	Size of tile 500x500 mm
123	Size of tile 600x600 mm
124	Size of tile 800x800 mm
125	Size of tile 1000x1000 mm
126	Providing and laying polished anti-skid vitrified floor tiles of various sizes (thickness to be specified by the manufacturer) approved make like NITCO, JHONSON, KAJARIA in all colors, shades as approved by engineer- in-charge laid on 20mm thick bed of cement mortar 1:4 (1cement: 4 coarse sand) including pointing the joints with matching pigment or any other relevant pigment as directed includingcleaningthefloorafter finishing of work.
127	Providing and laying Polished Granite stone flooring in required designand patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with whitecement slurry admixed with pigment of matching shade includingrubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
128	Providing and fixing 18mm thick mirror polished, machine cut for floors, kitchen platform, vanity counters facieses and other similar locations of required size of approved shades, color and texture laid over 20mm thick base cement mortar 1:4 (1cement: 4 coarse sand) and joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing etc. including moulding complete at all levels.
129	(Black Granite-Jet Black) of approved quality.
130	(GREY type Granite) of approved quality.
131	(Maroon type/similar Granite) of approved quality.
132	(White marble) of approved quality.
133	(Green marble) of approved quality
134	Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed withmatching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels
135	Raj Nagar plain white marble/Udaipur green marble/zebra black marble16mm thick
136	Granite of any colour or shade 18mm thick
137	Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
138	Marble Work
139	Granite Work
140	Providing and fixing of laminated board flooring AC4 using HDF solid core planks of specified thickness approved quality and color with tongued and grooved jointing including cost of thermo cot and other accessories complete.(to be approved by EIC) 8mm thick
141	Providing and fixing of MDF cornice 25mmx20mm In size.
142	15mm thick cement plaster on brick /concrete wall of mix 1:6 (1cement: 6 fine sand) including all carriages
143	15mm thick cement plaster on brick / concrete wall of mix 1:4 (1cement: 4 fine sand) including all carriages
144	12mm thick cement plaster on half brick / concrete wall of mix 1:6 (1cement: 6 fine sand)
145	6 mm thick cement plaster on concrete wall of mix 1:3 (1cement: 3 fine sand) including all carriages
146	Cement plaster skirting upto 30cm height with cement mortar 1:3 (1 cement: 3 coarse sand), finished with a floating coat of neat cement andcuring complete.18 mm thick including all carriages
147	Providing and applying plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.
148	Providing and applying cemement based wall putty 1mm thickness over plastered surface to prepare the surface even and smooth complete.
149	Providing and applying cemement based wall putty 2mm thickness over plastered surface to prepare the surface even and smooth complete.
150	Removing painting by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
151	Removing white or color wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
152	Removing dry or oil bound distemper, water proofing cement paint andthe like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
153	Removing lime punning/POP from walls including sand papering and disposal of rubbish as directed etc. complete.
154	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
155	Distempering with 1st quality Acrylic/oil bound washable distemper(ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as permanufacturers’ specifications, one or more coats on old work
156	Distempering with 1st quality acrylic distemper (ready mixed)havingVOC content less than 50 gms/litre,two or more coats on new work ofapproved manufacturer, of required shade and colour complete as permanufacturer’s specifications
157	Two or more coats on new work
158	One or more coats on old work
159	Finishing walls with water proofing cement paint of approved brand and manufacture to give an even shade.
160	New work (two or more coats applied @ 3.84 kg/10sqm) including cost of priming coat @0.80 liter/Sqm
161	Old work (one or more coats applied @ 2.20 kg/10sqm)
162	Applying priming coat with ready mixed white primer of approved brand and manufacture on wood work.
163	Applying priming coat with ready mixed zinc oxide chromate primer of approved brand and manufacture on steel galvanized iron/steel works.
164	Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.
165	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
166	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.
167	Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work.
168	Wall Painting with acrylic emulsion paint of approved brand andmanufacture to give an even shade. Two or more coats on new work
169	Finishing walls with Acrylic smooth exterior paint of required shade: Old work (one or more coats applied @ 0.90 liters/ 10sqm)
170	Finishing walls with 100% Premium acrylic emulsion paint havingVOCless than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shadeNew work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
171	Dismantling of existing chain link fencing, steel work complete, including stacking of serviceable material and disposal of unserviceable material within a lead as directed.
172	Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 m lead.
173	Dismantling of C.G.I. sheet roofing and stacking of serviceable material and disposal of unserviceable material within a lead as directed by the in- charge engineer.
174	Dismantling of existing wooden ceiling including stacking of serviceable material and disposal of unserviceable material as directed with all leads complete.
175	Dismantling wood work in frames, trusses, purlins and rafters up to 10 meters span and five meters height including stacking the material within 50 meters lead.
176	Dismantling of existing window shutters carefully without breakage including stacking within a lead as directed by the in-charge engineer.
177	Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm
178	Demolishing cement concrete work, including disposal of unserviceable material within the campus as per directions of EIC 1:3:6 or richer mix.
179	Demolishing brick work in cement mortar up to floor V level including stacking of serviceable material and disposal of unserviceable material within the campus as per directions of EIC.
180	Demolishing of rubble stone masonry in cement mortar including stacking of serviceable material and disposal of unserviceable material within the campus as per directions of EIC
181	Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Zsections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size includingnecessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion
182	Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
183	Powder coated aluminum (minimum thickness of powdercoated 50 microns)
184	For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing offittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.)
185	Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
186	Powder coated aluminum (minimum thickness of powdercoated 50 microns)
187	Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. Pre-laminated particle board with decorative lamination on bothsides.
188	Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.)
189	With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm)
190	With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)
191	With float glass panes of 8 mm thickness(weight not less than20.0 kg / sqm)
192	Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineerin- plate etc. complete as per the direction of Engineer-in-charge.With Stainless Steel cover plate minimum 1.25 mm thickness.
193	Providing and fixing machine molded ACP covering of approved pattern & design, made out of machine cut aluminum sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia. and 75 mm long bolt including providing aluminum washers 2 mm thick & 15 mm dia. at a staggered pitch of 200mm Centre to Centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge.
194	ACP 3.5mm thick of required color
195	ACP 4.0mm thick of required color
196	Providing and laying G.S.B. grade including compacting, watering and consolidation with power road roller to the required gradient and camber including all carriages of material complete.
197	Providing and laying G.S.B. grade including compacting, ramming, watering and carriage complete.
198	Supplying and laying of stone soling hand packed tightly including ramming, watering and carriages complete.
199	Supplying and Filling earth, including carrying by lorry, placing, dressing and ramming in layers not exceeding 20cm in depth, breaking clods watering, rolling each layer with ½ tone roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power road roller of minimum 8 tones, filling in ground depressions, Including of all carriages from source to site complete. complete job
200	Engagement of tipper for removal of mulba etc including fuel charges complete.
201	Engagement of excavator (JCB) in all terrains including fuel charges complete.
202	Engagement of hand cart
203	Providing and fixing of locks Godrej/Link make for ward robe, almirah, drawer
204	Providing and fixing of aluminum double channel with wheel set for sliding glass window of approved quality of following sizes.
205	20 mm
206	25 mm
207	Providing and fixing of door closer capsule type of standard make
208	Providing and fixing of door closer spring type of standard make
209	Manufacturing and fixing of computer tables of required size and height of 19mm thick solid core ply board, exposed surface to be laminated with Dulmica sheeting including cost of key boards (readymade), racks drawers, cupboards, cost of brass knobs / Godrej locks and other necessary fittings and fixtures of approved quality and make. (Measurements be made on top surface only) 600mm deep
210	Providing and fabrication of storage Almirah (ornamental) of approved quality 19mm Ply board in sides, shelves and wherever required including 6mm ply wood on back and 19MM pine board ply wood in shutters, inside and outside of shutters finished with Dulmica sheeting of approved quality and color on exposed face of approved design and drawings including painting two or more coats of synthetic enamel paint of approved quality and color inside including cost of following aluminum fittings and locks of Godrej/Link make.15mm dia. M.S. pipe chromium plated with necessary brackets 4\"-0\" length and including all other necessary accessories complete in all respects. (For payments front face to be measured).
211	60 cm deep
212	45 cm deep
213	Supplying and fixing of rolling shutters of approved make made of M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs grade No:2 and M. S. top cover of required thickness for rolling shutters (80x1.25mm M.S Laths with 1.25 mm thick top cover)
214	Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying priming coat of approved steel primer
215	Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.
216	Supply ,installation , testing and commissioningof 1.5 HP water lifiting motor including all necessary fittings labour charges / dismentalling of old one with all carriages comlete.
217	Supply ,installation , testing and commissioningof 1 HP water lifiting motor including all necessary fittings labour charges / dismantalling of old one with all carriages comlete.
218	Scientific cleaning and sterlization of water storage tanks the job involves six stages of cleaning ie; cleaning and sterlization processconsisting of mechanical de-watering high pressure ,cleaning sludge removal ,vaccum cleaning ,anti bacterial spray and finally killing of suspended and fluting bacteria by ultra voilet raidations as directed by engineer in charge.
219	Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.
220	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.
221	Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C. pan) with seat and lid with C.P. brass hinges and rubber buffers, 10 liter low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm overflow pipe with specials of standard make and mosquito proofcoupling of approved municipal design complete, including painting offittings and brackets, cutting and making good the walls and floors wherever required:White vitreous china dual purpose WC pan with white solid plastic seat lid with white vitreous china flushing cistern and C.P. flush bend
222	Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern ofcapacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.
223	Providing and fixing white vitreous china extended wall mounting watercloset of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 liter/6 liter (adjustable to 4 liter/8 liters), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
224	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:One urinal basin with 5 literwhite P.V.C automatic flushing cistern.
225	Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.
226	Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
227	Providing and fixing white vitreous china water closet squatting pan(Indian type) Orissa pattern W.C. pan of size 580x440 mm
228	Providing and fixing white vitreous china pedestal type (Europeantype/wash down type) water closet pan.
229	Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittingsand fixtures complete: 10 liter capacity -White
230	Providing and fixing solid plastic seat with lid for pedestal type W.C. pan Cera, Parry ware complete.
231	Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required.610x460mm bowl depth 200mm (standard make approved by EIC).
232	Providing and fixing 600x450mm beveled edge mirror of specified brand
233	Providing and fixing beveled edge mirror of specified brand
234	Circular shape 450mm dia.
235	Rectangular shape 450x600mm.
236	Oval shape 450x350mm
237	Providing and fixing of C.P grating 100mm size. ISI marked complete.
238	Providing and fixing of G.I pipes (class B pipes Prakash Surya/ Jindal or equivalent) complete with all necessary G.I fittings and clamps including cutting and making good the walls etc. Internal & External work
239	15mm dia. Nominal bore
240	20mm dia. Nominal bore
241	25mm dia. Nominal bore
242	32mm dia. Nominal bore
243	40mm dia. Nominal bore
244	50mm dia. Nominal bore
245	Providing and fixing of PVC connection with C.P. brass unions
246	300mm long.
247	450mm long
248	600mm long
249	Providing and fixing ball valve (brass) of approved quality complete (Leader/ Saint/ equivalent Make)
250	15mm dia.
251	20mm dia.
252	25mm dia.
253	40mm dia.
254	50mm dia.
255	Providing and fixing gate valve (brass) of approved quality complete (Leader/ Saint Make/ equivalent Make).
256	15mm dia.
257	20mm dia.
258	25mm dia.
259	40mm dia.
260	40mm dia.
261	Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
262	Construction of platform for W.C. with brick masonry in cement mortar 1:6 mix. Including filling of sand and providing of 15mm cement plaster in 1:4 mix.
263	Providing and fixing of C.P. Cups for C.P. fittings.
264	Providing and fixing of C.I. manhole cover heavy duty of following sizes.
265	12\"x12\"
266	18\"x18\"
267	24\"X24\"
268	Supply ,installation,testing and commissioning of water heater (geysers) of copper core including cost of dash fasteners with nuts and washers
269	50 Litre
270	35 Litre
271	25 Litre
272	Providing and fixing Geyser elements (as per Geyser type)
273	Providing and fixing Geyser thermostat of approved quality complete.
274	Providing and fixing C.P. brass bib cock of approved quality (Jaguar- Continental/Hindware-contessa plus/equivalent) 15mm nominal bore short body.
275	Providing and fixing of 15mm size chromium platedbrass pillar cock of approved quality. (Jaguar- continental/Marc/Hindware-contessa plus/equivalent)
276	Providing and fixing of 15mm size chromium plated cast brass angle valve of approved quality. (Jaguar- Continental/Hindware-contessa plus/equivalent) with wall flange
277	Providing and fixing of 15mm size chromium plated cast brass wash basin mixer of approved quality. (Jaguar- Continental/Hindware-contessa plus/equivalent)
278	Providing and fixing of 15mm size chromium plated cast brass sink mixer of approved quality. (Jaguar- Continental/Hindware-contessa plus/equivalent) with flange.
279	Providing and fixing of 15mm size chromium plated cast brass wall mixer Non telephonic with lead of approved quality. (Jaguar-Continental/Hindware- contessa plus/equivalent) with flange
280	Towel ring 20mm dia. (Jaguar-Continental/Hindware-contessa plus/equivalent) with flange
281	Towel rod (Jaguar- Continental/Hindware-contessa plus/equivalent)
282	Stainless Steel Soap Dish holder.
283	Providing and fixing 600mmx120mmx5mmglass shelf with edges round of supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs etc. complete.
284	C.P./PVC Long bends of required size of approved quality.
285	C.P. Waste for wash basin of approved quality
286	Providing and fixing of pvc manhole cover of approved make of following sizes. (Heavy type)
287	12\"x12\"
288	18\"x18\"
289	24\"X24\"
290	Construction of soakage pit by way of earth work in excavation including providing and fixing of pre-cast cement concrete rings 0.90 mtr dia. of specified thickness and 200-250 mm wide including all carriages complete. Including disposal of excavated earth within the campus as directed by EIC.
291	Providing and fixing of pre-cast cement concrete lid for soakage pit of specified size and thickness.
292	Construct brick masonry man hole in cement mortar 1:4 (1 cement: 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 Coarse sand : 4 graded stone aggregate 20mm nominal size) foundation concrete (1:4:8) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size finished with a floating coat of neat cement complete.
293	Inside size 90 x 90 x 90cm deep including RCC/C.I. manhole cover medium duty with frame of size 60x60mm size. With F.P.S. bricks with class designation 75 and with crushed stone aggregate complete in all respects.
294	Inside size 60 x 60 x 60 cm deep including RCC/C.I. manhole cover medium duty with frame of size 60x60mm size. With F.P.S. bricks with class designation 75 and with crushed stone aggregate complete in all respects.
295	Inside size 45 x 45 x 45cm deep including RCC/C.I. manhole cover medium duty with frame of size 45x45mm size. With F.P.S. bricks with class designation 75 and with crushed stone aggregate complete in all respects.
296	P/F of Rain Guttermade of superior quality and gauge of tin sheets of different colours including fixing of clamps,nuts,washers etc incl fixing of 75mm dia pvc pipe btype for disposal of rainwater upto all floor levels as directed by eic
297	Providing and fixing of PVC (Prince/Finolex/Jindal make) pipe (Type \"B\") in proper gradient in excavated trenches including jointing and refilling the excavated material complete including cost of excavation incl. all fittings &fixtures complete job
298	150mm dia. Pipe
299	100mm dia. Pipe
300	75mm dia. Pipe
301	50mm dia. Pipe
302	Providing and fixing of Health Faucet/jet spray with plastic flexible pipe 8 mm dia, 1.5 m long, wall hooked complete as required, including necessary Accessories, installation charges and complete in full respect as per the directions of Engineer- in-charge.
303	Providing and fixing spindle 15mm dia. All types like washer type/disc type etc.
304	Providing and fixing Mixer leg set (Jaguar/Mark/Cera)
305	Providing & Replacing of Siphon to flushing cistern Cera/Hindware make
306	Providing & Replacing of ball cock of flushing cistern without float
307	Providing & Replacing of ball cock of flushing cistern with float
308	Providing & fixing of polycarbonate corrugated sheets of approved make incl. cost of nails complete job
309	Providing & fixing of PVC polycarbonate plain sheets of approved makeincl. cost of nails complete job
310	Providing & fixing of pvc panelling 10mm of approved make including all related accessories like corner/top flashing, etc complete including grounds, including fixing, screwing, and G.I frame work etc complete
311	Providing & fixing wallpaper of approved pattern & quality to wall surface including chemical & adhesive as per directions of EIC
312	Providing & applying of sanding sealer and preparing the surface for final finish with touch wood Polishing on the sealer surface with spray gun all complete job.
313	Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.
314	PN-16 pipe, 16mm OD(SDR-7.4)
315	PN-16 pipe , 20mm OD(SDR-7.4)
316	PN-16 pipe , 25mm OD(SDR-7.4)
317	PN-16 pipe , 32mm OD(SDR-7.4)
318	Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.External work including trenching, refilling etc.
319	PN-16 pipe , 20mm OD (SDR-7.4)
320	PN-16 pipe , 25mm OD (SDR-7.4)
321	PN-16 pipe , 32mm OD (SDR-7.4)
322	PN-16 pipe, 40mm OD (SDR-7.4)
323	PN-10 pipe , 50mm OD (SDR-11)
324	PN-10 pipe , 63mm OD (SDR-11)
325	Providing and fixing PPR Unions
326	PPR Union 20mm
327	PPR Union 25mm
328	PPR Union 32mm
329	PPR Union 40mm
330	PPR Union 50mm
331	PPR Union 63mm
332	Providing and fixing PPR ball valves (RAK/ Astral/ Prince or equivalent)
333	for 25mm dia.
334	for 32mm dia.
335	for 40mm dia.
336	for 50mm dia.
337	for 63mm dia.
338	Providing and fixing of thermal insulation over following dia G.I Pipes at all heights.
339	for 15mm dia.
340	for 20mm dia.
341	for 25mm dia.
342	for 40mm dia.
343	Providing and fixing C.P. 2 in 1 brass bib cock of approved quality (Jaguar- Continental/Hindware-contessa plus/equivalent) 15mm nominal bore
344	Providing & fixing G.I chain link fencing of approved size 50mmx50mm (3.15mm thick) including necessary bolts, welding etc complete
345	Providing & fixing various sizes of 15mm CP Nipples
346	Providing and laying polymer modified cementitous, elastometric, waterproofing & protective composed of best quality portland cement, properly selected & graded aggregates, additives & acrylic emulsion polymer as a binder ( Dr. Fixit Pidifin 2K) including carriage of material complete job.
347	Providing and laying on terrace upto floor five level lime concrete with graded brick agg. 25mm nominal size and 50% mortar comprising of 1lime putty: 2surkhi and curing complete.
348	Providing and fixing of Vertical blinds of required color as approved by EIC
349	Repair of existing vertical blinds including removing,repairing and installation of same all accessories complete job
350	Providing and fixing of roller blinds of required color as approved by EIC
351	Hire charges of shamiyana Pandal and conopy type of appropriate theme & waterproof type) with crewel & net lining inside in walls and ceiling including carpet flooring & celing fans (15 nos) including erecting & removal of the same with all carriages leads & lifts complete to site of work complete.
352	Shamiyana Pandaltype size (40\"-0\"\"x80\"-0\"\") =3200sft
353	Conopy type Size (15\"-0\"\"x 20\"-0\")=300sft
354	Hire charges for Air coolers as per site requirement incl all carriages of material complete upto site of work.
355	Hire charges for sofas (Single seater) with slip covers etc as directed by engineer I/Cincluding all carriage complete upto site of work .
356	Hire chargesfor glass tables (4\"-0\"\"x2-0\") with all carriagesupto site of work complete and as directed by Engineer I/C.
357	Hirecharges for V.I.P chairs with fancy covers as directedincluding all carriageupto site of workcomplete.
358	Supply of flex banners with all writeups & logos as directed by engineer I/C. all carriage complete .
359	Supply of flex banners with all writeups & logos incl. MS frame as directed by engineer I/C. all carriage complete .
360	Supply of 20mmdia cotton rope of approved makefor national flagincluding all carriage upto site of workcomplete .
361	Hire chargesof Dice/ Stage with decorated roof, ceiling, posts, necessary stairs, furnishingincluding all carriages as directed by engineer in-Charge
362	Hire charges for supply and laying of red carpet1.22 mtr wide and removing of same after the end of eventincluidng all carriages complete
363	Hire charges for supply and laying of Superiorcarpetand removing of same after the end of event incluidng all carriages complete
364	Hire charges for supply and placing in position Plastic chairs including all carriages involved complete
365	Hire charges for supply and placing in position foam chairs including all carriages involved complete
366	Supply and laying of lime as per the directions of Engineer InCharge.
367	Removing of damaged and Providing & fixing of inline Activated CarbonFilter of approved make as directed by Engineer incharge complete.
368	Removing of damaged and Providing & fixing of inline Sediment Filter of approved make as directed by Engineer incharge complete.
369	Removing of damaged and providing& fixing of 100 GPD Motor (Kent booster pump) of approved make as directed by EIC
370	Removing oof damaged and providing & fixing of solonide valve of approved make as directed by Engineer incharge complete
371	Removing of damaged and Providing & fixing of sediment candle 10\"\" of approved make as directed by engineer incharge complete.
372	Removing of damped and providing. No and fixing of Spun Candle 10\" of approved make as directed by Engineerinchargecomplete
373	Removing of damaged and Providing & fixing of Post Carbon Blue of approved make as directed by Engineer incharge complete
374	Removing of damaged and Providing & fixing of Hollow Fiber/postMembrane UF of approved make as directed by Engineer incharge complete.
375	Removing of damaged and Providing & fixing of 20\" activated carbon of approved make as directed by Engineer incharge complete.
376	Removing of damaged and Providing & fixing of 20\" Sediment FilterCandle of approved make as directed by Engineer incharge complete.
377	Removing of damaged and Providing & fixing of RO Membrane 10\" welded of approved make as directed by Engineer incharge complete.
378	Removing of damaged and Providing No & fixing of UV Lamp 11W of approved make as directed by Engineer incharge complete.
379	Removing of damaged and Providing No & fixing of UF Membrane 10\"13 (blocked) of approved make as directed by Engineer incharge complete.
380	Removing of damaged and ProvidingNo & fixing of UF Membrane (Open) of approved make as directed by Engineerinchargecomplete.
381	Removing of damaged and providing N o & fixing of Wiring ofapproved makeas directed by Engineer incharge complete.
382	Removing and damaged and N o providing fixing ofElectric Auto flushof approved make as directed by Engineer incharge complete.
383	Removing a n d damaged and providing fixing of FRT of approvedmake as directed by Engineer incharge complete
384	Removing and damaged and providing fixing of PF( Pre filter bowl) of approved make as directed by Engineer incharge complete
385	Providing and fixing 1/2\"\" socket as directed complete
386	Providing and fixing 1/2\"\" plug as directed complete
387	Providing and fixing 1/2\"\" adopter (SMPS) as directed complete
388	Providing and fixing RO Pipe as directed complete
389	Removing of damaged and providing foxing rejecter as directed complete
390	Supply Installation , testing and N o Commissioning of kent pride plusKENT pride plus water Purifier with In-Tank UV Disinfection uto;osomg RO+UF+TDS Control Purification process with a storage capacity of 8 liters and output discharges of 15 It/Hr abd abd external prefitted bowl of same kent brand all complete
391	Upholstery to the sofa sets/single seats by way of removal of wornoutpolishable regzine, cloths, cushions,linings ,springs etc.and upholstery by new regzine of superior quality ,foam of high density (32D) ot appropriate thickness (100mm for seat,50mm for back support and 12mm for profiling )incl.replacing of demaged springs. (all materials involved to be approved by engineer in charge incl.cost involved for labours for displacement of sofa sets from rooms to working space area and vice versa complete job.
392	3 seater double face
393	2 seater double face
394	P/F of curtains with curtain rods of stainless steel of required size & pattern of approved make and stainless steel brackets,stainless steel end brackets of required design & pattern with necessary fittings & fixtures complete as directed by Engineer incharge (size 2.0mx1.20m)
395	Supply wooden roll of Honour board 4×3 feet size with letter writing. (incl. fixing & carriage complete. as directed
396	Clearance & testing of PVC Rainwater pipes, CI pipe network incl joints upto Manholes (rate include two separate operations per year after every six months) by way of removing blockades if any incl disposal of unwanted material repairing of leakages by silicon sealant etc and necessary realignment wherever is required incl. cost of scaffolding etc. at all floor / roof top levels, complete job.
397	Removing of damaged PVC Rain water pipes and Providing and fixing 100 mm P.V.C Rain water Pipes, vent pipes (Prince B-type)ISI mark including all fittings with or without access of any degree ie bends, junctions, cowls, offsets, access pieces, holder bats and clamps for suspended pipes in ceiling, stays, Vertical walls etc and jointing with solvent/seal joints and at all floor / roof top levels including removing of ACP Cladding and refixing the same where required with necessary scaffolding / staging as directed by the Engineer-in-charge.
398	Cleaning & testing of gutters (rate include two separate operations per year after every six months) by way of removing of accumulated debris, vegetation, weeds waste and unwanted material if any incl RM disposal of wherever is required incl. cost of scaffolding etc. at all floor / roof top levels, complete job. (measurement to be taken for Gutter length only)
399	Repair work of gutter joints in (Alluminum as well as GI Troughs) (rate include two separate operations per year after every six months) by way of repairing of trough joints by adhesive Duco putty, silicon sealant (exterior grade etc and incl necessary realignment wherever is required incl. cost of scaffolding etc. at all floor / roof top levels, complete job.
400	Removing of damaged aluminum trough & Providing and fixing of Aluminum gutter (22 gauge) as per design and shape with necessary scaffolding / plate form upto floor 4 levels including cost of necessary screws, sealing of joints by adhesive (Duco putty), silicon sealant etc to make it leak proof all complete.
401	Providing and fixing PVC 2mm thick polycarbonate multiware sheets using 12mm polymer coated hot dip galvanized hexself drilling fastners on each crust of sheets for connection with purlins at 900-900mm centers on all sides and end laps etc Complete job
402	Providing/ fixing aluminum composite sheet cladding (exterior grade) in vertical / horizontal surface using 4mm thick sheet, the sheet shall be bent to shaped profiles as required including perimeter extrusion base frame extruded stiffeners 2.5mm to 3mm ss expansion fastners and silicon sealant (dow coming 789) all backup arrangements required for installations including scaffoldings required upto all floor levels complete job.
403	Removing of damaged and providing and fixing of mic cable jack male to XLR 3 pin wire for Microphone 3 meter long including all carriages, service charges, taxes etc complete
404	Supply of Duracell AA type for Microphone including all service charges, taxes etc complete.
405	Supply of Amplifier 125 PDR with 12-24 Volt & 3-5 amp power including all carriages, service charges, taxes etc complete
406	Supply of Mic battery assembly including all carriages service charges, taxes etc complete
407	Supply of 12 Volt power supply for 15 watt SCM speaker including all carriages service charges, taxes etc complete
408	Supply of Table Mics AWM -630 VG or equivalent including all carriages service charges, taxes etc complete
409	Supply of Mics CMD -5200 or equivalent including all carriages service charges, taxes etc complete.
410	Supply of Nine core cable to interconnect Mics with each other in conference room including jacks and all carriages service charges, taxes etc complete.
411	cable
412	jack
413	Removing of damaged and providing and fixing of necessry aluminium and stainless steel hardware fittings with necessry screws etc complete in all respects to thesetisfaction of incharge Alumunium fittings
414	handle 250mmx10mm
415	handle 150mmx10mm
416	hadle 125mmx10mm
417	handle 100x10mm
418	Removing of damaged and providing and fixing of necessry aluminium and stainless steel hardware fittings with necessry screws etc complete in all respects to thesetisfaction of inchargeStainless steel fittings
419	towe bolt 300mmx10mm
420	tower bolt 250x10mm
421	towe bolt 200x10mm
422	tower bolt 150mmx10mm
423	P/F of fixtures of approved make with necessery sctews extra complete in all respects
424	Brass handle 175mm long
425	SS Butter fly L drop
426	Door stopper
427	bed socket for almirah
428	Removing of damaged and providing and fixing of SS sliding Door Bolts (L-Drop )I S I marked work from with necessary screws etc complete in all respects to the satisfaction of engineer in charge.(200mm )
429	Providing and fixing of Kadi Tala (6 lever ) 2 in 1 lock with Al-drop of size 200mm ISI marked with colour coated with necessary screws etc complete in all respects to the satisfaction of engineer in charge. (200mm )
430	Providing and fixing of Capsule type Door Closer with necessary screws etc complete in all respects to the satisfaction of engineer in charge. (200mm )
431	Removing of damaged and providing and fixing of Aluminum G-Channel of size 50mm ×50mm with necessary screws etc complete in all respects to the satisfaction of engineer in charge.(200mm )
432	Removing of damaged and providing and fixing of sliding wheels with ball bearing (110mm long ) at top of door and aluminum G- Channel with necessary screws etc complete in all respects to the satisfaction of engineer in charge
433	Removing of damaged and providing and fixing of 10mm dia and 100 mm long geyser bolts on walls by way of drilling of required dia with necessary screws, rawl plugs etc complete in all respects to the satisfaction of engineer in charge
434	Removing of damaged and providing and fixing of uperior quality aluminum fitting for aluminums partition door/ window top hung (quality and pattern to be approved by engineer in charge.
435	Dead Lock six lever (godrej make)
436	Handle (godrej make)
437	FLOOR spring for sixty kg weight (godrej make)
438	Cocks pur handle for top hung
439	Two Bar friction stainless steel
440	P/F of film frost of approved brand and manufacture incl all charges complete job
441	Supplying and installing 1.2mm thick self adhesive HDPE membrane having puncture resistance of 1000N (+/- 5 to 10%as per ASTME 154,tensile strength of 25 MPA as per ASTMD412 Allocation of greater than 500% as per ASTMD 412,Resistance to hydrostatic head greater than 60M as per ASTMD 5385,peel adhesive to concrete 880W/M as per ASTMD 1270,45 days UV exposure test-pass the system should fully bonded the RCC and consists of highly resilient HDPE film ,a pressure sensitive-adhesive layer which covered by a weather proof protective layer the membrane shall have min. of 100mm side and end laps which shall be sealed with double sided adhesive tape. Size of membrane should be 3mtx20m not less than this to minimize the joints the water proof stem should be applied directly y the manufacturer With 10 years of insurance backed system warranty against leakage all complete as per manufacturer specifications.
442	Supply and filling of 2nd class sand into sunken area including hand ramming with all carriages of material involved from nearest source complete job
443	Writing letters and numerals for roll of honour for hon\"ble judges and other officials as desired by engineer in charge brass
444	25mm
445	50mm
446	75mm
447	100mm
448	Writing letters and numerals for roll of honour for hon\"ble judges and other officials as desired by engineer in charge computerised stickers on wooden boards
449	25mm
450	50mm
451	75mm
452	100 mm

Also Visit

Tenders

Jammu And Kashmir Tenders

Construction Tenders

Civil Construction Tenders

Civil Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Stage Contract For Routine Maintenance And Repairs Civil / Sanitary Works Including Face Lifting , Scientific Cleaning & Sterilization Of Water Storage Of Tanks , Roll Of Honor Boards And Display Of Name Plates Etc At High Court Complex Sri, Srinagar-Jammu And Kashmir

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Stage Contract For Routine Maintenance And Repairs Civil / Sanitary Works Including Face Lifting , Scientific Cleaning & Sterilization Of Water Storage Of Tanks , Roll Of Honor Boards And Display Of Name Plates Etc At High Court Complex Sri, Srinagar-Jammu And Kashmir

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us