|
| 1 | Dismantling and removing RCC work including stacking the useful materials for reuse and removingthe debris within 50 m lead including Cost, Conveyance and labour and T&P required for the work etc. complete as per Direction of Engineer in charge. |
| 2 | Dismantling Brick or stone masonary work in lime or cement mortar including stacking of useful materials for reuse and removingthe debris within 50 m lead including Cost, Conveyance and labour and T&P required for the work etc. complete as per Direction of Engineer in charge. |
| 3 | Plain cement concrete (1:2:4) using 12mm size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with labour,labour cess and T&P etc. required for the work complete as per the direction of the Engineer-in-charge. |
| 4 | Providing, lifting, hoisting and laying Reinforced cement concrete of M-20 grade as per approved designs and drawings having a minimum compressive strength (in work test) 200 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed andcleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portlandslag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position complete as per direction of Engineer-In -Charge.i) Column Superstricture ( Second Floor) |
| 5 | ii) Beam ( Second floor) |
| 6 | iii) Lintel ( Second Floor) |
| 7 | iv) Chajja ( Second floor) |
| 8 | v) Roof Slab ( Second Floor) |
| 9 | vi) Stair case ( Second floor) |
| 10 | Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL / JINDAL STEEL(Panther) /(grade Fe-500D) etc. includingbending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge. |
| 11 | Fly Ash brick masonry in cement mortar (1:6) in super structure using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge. (Second FLoor) |
| 12 | Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. (Second Floor) |
| 13 | Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royaltiesof all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.(Second Floor) |
| 14 | Supplying, fitting and fixing vetrified tiles of premium grade in floors on 20mm thick bed of C.M. (1:4) (1cement:4course sand) and filling the joint with white cement mixed with pigment to match the shades of the tile including cost of all materials, taxes, labour, labour cess, T&P etc. required for the work completein all respect as directed by the Engineer in charge. (Second Floor) |
| 15 | Providing and laying of Kotatiles in Dados on 12 mm thick cement mortar 1:3 (1cement: 3coarse sand) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In-Charge at all floors and all heights.etc., complete in all respectin all floorsas per direction of Engineer-In-Charge. |
| 16 | Fixing Vitrified tiles in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete. ( Second Floor) |
| 17 | FixingKota tiles in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete. ( Second Floor) |
| 18 | Supplying, fitting , fixing of IndustrialVitrified tiles of Approved grade in floors tread or steps and landing on 25 mm thick bed of cement mortar 1:4(1cement: 4 Sand ) jointed with neat cement slurry mixed with pigments to match the shades or the tiles including rubbing and polishing etc.,complete as per direction of Engineer-in-charge.(Second FLoor) |
| 19 | Finishing wall surface with Weather Coat two coats over a coat of primer with any approved shade including cost, conveyance, taxes, cess and royalties of all materials with labour and T&P required for the work etc., complete in all respectas per direction of Engineer In Charge. (Second Floor) |
| 20 | Finishing wall surface of wall with wall putty (water based) of approved make and finished smooth and even surface to receive paiting including cost of scaffulding stsging changes with cost of all materials labour etc complete in all respectas per direction of Engineer In Charge.(Second Floor) |
| 21 | Painting two coats with plastic emulsion paint over a coat of primerto make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge. (Second Floor) |
| 22 | Providing , fitting & fixing of Al. door with OEL anodized Al. door section of 9202 aas vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm plain glass in top portion with 12mm thick prelaminated board in botttom portion fixed on door frame by means of tapered clip No.4660 and frame to be completed bt means of jointing angle No.1855 including all cost of labour T & P hire charges of drilling machine labour charges etc complete. |
| 23 | Supplying, fitting & fixing of window (sliding type made up alminum section) 151-154,151-155, as windows frame section No.151-155, 151-153 nad 151-167 as shutter framw with 5mm thcik black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour T & P etc complete as per direction of Enginner -in charge. |
| 24 | Painting two coats with approved enamel paints of approved colour, shadeover a coat of primer including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour etc, complete as per specification & direction of E.I.C. |
| 25 | Supplying,fitting, fixing of, MS door and MS Windowof approved specification andof approved size, materials and design with a coat of primer includingpainting two coats over a coat of redoxideprimer with cost and conveyance of all materials, labour, royality,etc. complete in all respect and as per direction of Engineer-in-charge. |
| 26 | 2.5 cm.(1\"\") thick grading concrete(1:2:2) over roof slab after chipping and cleaning the surfaces by wire brushing, laid to proper slope finished smooth including watering, curing, cost, conveyance of all materials such as 6mm size black hard granite crusher broken chips, sand, cement etc. and labour with T& P required for the work with all taxes and royalities etc. complete in all respectas per direction of Engineer in charge. |
| 27 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance of all materials, cost of all labour,labour cess, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge. |
| 28 | EI WORKSRecessedwiring to light points/fan points/Exhaust fan/call bell point with 1.5mm2 F.R. PVC insulated SC multistrand Copper conductor of ISI marked with 20 mm non-metalic PVC flexible Conduit with 5A. 250 V. Piano type Switch ISI marked and ceiling rose of ISI marked mounted on M.S. box having front bakelite cover of suitable size, M.S. box with 1.5mm2 F.R. PVC insulated SC multistrand Cu. conductor as earth wire including all accessories and connections as per direction of Engineer in charge. (Make of wire-Finolex/Havells/polcab/V-Guard/Anchor)Group-A. |
| 29 | Group-B |
| 30 | Group-C |
| 31 | Recessed wiring to5/6A. Socket outlet with 2x1.5mm2 FR PVC insulated single core multistrand Cu.conductor of ISI marked in recess 20mm dia non-metalic PVC flexible Conduit with with Piano type Switch, phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1x1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. (Make of wire Finolex/L &T/Anchor/Havells/polycab/V-Guard) |
| 32 | On Existing Board |
| 33 | S/F ofIndustrial Socket with 3pin top & 25A. SP MCB(C-Series) of HPL/L&T/Havels/Anchor make. |
| 34 | -do- Submain with following sizes of PVC S.C. Cu. FR wire in 20mm dia non-metalic pipe with all accessories. (Make of wire-Finolex/ Anchor/ Havells)---a) 1x1.5 mm2 for inverter wiring |
| 35 | b) 2x1.5mm2 + 1x1.5mm2. |
| 36 | c) 2x2.5mm2 + 1x1.5mm2. |
| 37 | d) 2x4mm2 + 1x1.5 mm2 |
| 38 | e) 4x6mm2 + 2x2.5 mm2 |
| 39 | S/F. Of 1x20Wt. LED Tube light fittings including all connections and accessories(Bajaj/ Havells/Crompton /Philips make) |
| 40 | S/F of 63A, FP MCB C- Series Legrand / Hager / L&T Make with mettalic cover with installation and connection |
| 41 | S/F of 12Watt Slim surface mounted round LED panel al. die cast body with premium diffuser to ensure glare free & even distribution of light.(Make-Havells/Crompton/Philips/Bajaj) |
| 42 | S/F of standard Earthing Complete with all connections and accessories. |
| 43 | S/F of Special Earthing complete with 3 mtr long 40 mm G.I pipe with 600x600x3mm copper plate, 8SWG G.I wire,Charcoal,Salt,Chamber including excavation of earth and filling of loose soil upto ground level. |
| 44 | S/F. Of 48\"AC Ceiling fans including all connections and accessories of Usha Allure/Havells Pacer/Bajaj Elegance/Equivalent make. |
| 45 | S/F. of Step type Electronic fan regulator of Cona/Anchor/Havells make. |
| 46 | ISI Marked Portable fire extinguisher, 4.5 kg CO2 type fire extinguishers complete in all respect including initial fill and wall suspension brackets & shall conform to latest IS 15683 make:-Safex/Minimax/Cease fire |
| 47 | S/F of 2300 VA U.P.S of Microtek or equivalent Make |
| 48 | S/F of tublar battery of Excide or equivalent. I.N.V TUBULAR. I.TT 1500. 150AH 12 volt make |
| 49 | S/F of 250mm crisp air exhaust fan of make Usha/Bajaj/Havells/Equivalent |
| 50 | S/F. Of 63A4Way (4+12) double door TPN Distribution Box with Provn. Of 1x63A. FP +12x6A.-32A. SP MCB of HPL/ Havells/L&T/Eq. make. |
| 51 | S/F. Of 100A ICTPN Main Switch with all connections and accessories of HPL/ Havells/Anchor/L&T make. |
| 52 | S/F. Of 100A ICTPN Bus Bar with all connections and accessories of HPL/ Havells/Anchor/L&T make. |
| 53 | S/F 4 x 16 mm2 PVC Al Armoured Cable Of ISI Marked (Polycab/Nicco/Havels) |
| 54 | Laying of 16 sq.mm cable in ground with sand and protective covering including excavation and filling of soil as required. |
| 55 | Supply of 1.5 Ton Copper Split type InverterA.C.machines of5- Star rated LG 5 in 1 model/Voltas /Carrier Make or equivalent . |
| 56 | Fixing Charge of AC machine |
| 57 | S/F of Angle frame for safe guard ofOutdoor Unit of AC machine |
| 58 | S/F of 5KVA Stabliser of V-Guard/Autotake/Elpower make. |
| 59 | PH WORKSSupplying all materials , labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS: 15778 and G.I pipe fittings of the following nominal bore with clamps including making good the wall,ceiling and floor ,testing all complete as per P.H. specification and direction of Engineer-in-charge---20mm dia C - PVC pipe |
| 60 | 25mm dia C - PVC pipe |
| 61 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge.--15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) |
| 62 | 15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make) |
| 63 | 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) |
| 64 | 25mm dia brassfull way valve (Shakti make) |
| 65 | 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make) |
| 66 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge. |
| 67 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. |
| 68 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge. ----110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 69 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 70 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 71 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 72 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 73 | 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) |
| 74 | 110mm U-PVC Plain shoe bend(Ori Plast/Finolex/Supreme Make) |
| 75 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 76 | Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge2000 liters capacityPVC water storage tank |
| 77 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge---10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 78 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral \"p\" or \"s\" trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge---European water closet with \"p\" trap plain(Hindware/Parryware/Neycer make) |
| 79 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge----550mmx400mm W.H.basin (Hindware/ Parryware /Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with 22” x 16” pedestal |
| 80 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge---25mmx600mm long CP towel rail |
| 81 | Towel ring |
| 82 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.---600mmx125mm plate glass shelf with CP/NP guard rails. |
| 83 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.----600mmx450mm size B.E mirror (swivelled type) |
| 84 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge---CP soap holder |
| 85 | Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 86 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 87 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 60cmx60cm special printed seriesto be pre-approved by the Engineer-in-charge )---Kajaria/Somany/Johnson tile 60cmx60cm |
| 88 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 89 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 60cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge )-Kajaria/Somany/Johnson tile 60cmx30cm |
| 90 | Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finishstructural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material,The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre\"s standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 91 | Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigmentscomplete in all respect as per specification and direction of the Engineer in charge |
| 92 | Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink |
| 93 | Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 80 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 120 liter\"s along withnoa of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge---Aqua guard pure Chill 80 PSS UV |
| 94 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture\"s specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge----100mm dia P.V.C. pipe |
| 95 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber ofinside size 760mmx760mmx460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-charge----Inside size 76cmx76cmx46cm with 18” dia RCC MH cover |
| 96 | Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 97 | 1 no 20 Users Septic Tank---Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge. |
| 98 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in chargewith 1st extra lift of 1.50 m over initial laft. |
| 99 | Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge. |
| 100 | Supplying all materials, labor T&P providing CC (1:3:6) with 4 cm HG metal including watering curing lead of all materials to site etc. complete |
| 101 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge. |
| 102 | Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge. |
| 103 | Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,bindingand tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge. |
| 104 | Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as perspecification and direction of the Engineer-in-charge--RCC floor, roof slab chhaja up to 4.430 m height |
| 105 | Supplying all materials.labour.T&P and providing brick work in foundation and plinth with 25cmx12cmx8cm size Fly Ash bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge. |
| 106 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 107 | Supplying all materials,labour,T&P and providing 16mm thick cement plaster(1:6) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 108 | Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as perspecification and direction of the Engineer-in-charge |
| 109 | Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC. |
