|
| 1 | Earth work in excavation of foundation in hard soil or gravelly soil within 50m initial lead and 1.50m initial lift including rough dressing breaking clods to maximum 5cm to 7cm & laying in layers not exceeding .0.3m depth and as per direction of the Engineer-in-Charge |
| 2 | Providing, supplying, filling in foundation and plinth with sand including watering and ramming with cost, conveyance, royalty, taxes of all materials with all labour, T&P etc., complete. |
| 3 | Cement concrete of proportion (1:3:6) in F&F using 40mm size black crusher borken metal of approved quality including cost, conveyance, taxes & royalty of all materials and labour with T&P etc. complete in all respect as per the direction of Engineer-in-charge. |
| 4 | Fly Ash brick masonry in cement mortar (1:6) in Foundation & Plinth using bricks of “23cmx11cmx8cm\" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&Prequired for the worketc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 5 | Fly Ash brick masonry in cement mortar (1:6) in Superstructure using bricks of “23cmx11cmx8cm\" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&Prequired for the worketc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge - Ground Floor |
| 6 | First Floor |
| 7 | RCC work of M-20 grade in the following Structural building works using 20mm to 10mm down graded hard black granite Crusher broken aggregates of approved quality from approved quarry including mixing hoisting lowering laying compacting concrete using concrete mixer, vibrator watering and curing for four weeks centering and shuttering and finishing the exposed surfaces smooth as per relevant clauses of section 1700 of MORT&H specification for Road & Bridge works (4th Revision) including hire and running charges of all machineries including cost, conveyance, royalty and taxes of all materials and labour with T&P required for the work etc. complete as per drawing and Technical Specification and as directed by the Engineer-in- Charge.(Excluding cost of reinforcement & binding wires to be used in the work) - Column base footing |
| 8 | Plinth Beam |
| 9 | Column (GF) |
| 10 | Column (FF) |
| 11 | Lintel (GF) |
| 12 | Lintel (FF) |
| 13 | Chajja (GF) |
| 14 | Chajja (FF) |
| 15 | Staircase |
| 16 | Beam |
| 17 | Roof Slab (GF) |
| 18 | Roof Slab (FF) |
| 19 | 2.5cm thick grading concrete of proportion (1:2:2) over roof slab using 12mm to 6mm size cb chips of approved quality including cost, conveyance, taxes & royalty of all materials and labour with T&P etc. complete in all respect as per the direction of Engineer-in-charge. |
| 20 | First Floor |
| 21 | Straightening cutting, bending bent up or coiled rods, including cranking, hooking, welding or jointing the M.S. Rods or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL (Grade Fe-500D) confirming to I.S. 432 (Plain) and 1785 (Tor) steel and binding tying the grills, hoisting, lowering and placing in proper position required for RCC works including cost, conveyance of M.S. Rods or tor steel and binding wires of 18 to 20 gauge and cost of all labour with all T&P required for the work etc. complete as directed by the Engineer-in-charge -Ground Floor |
| 22 | First Floor |
| 23 | 12 mm thick cement plaster (1:6) finished smooth to brick masonrywith cement punning for skirting after racking out joints including watering, curing including cost, conveyance, taxes, royalties & labour with T&P etc. Complete and as per the direction of Engineer-in-charge -Ground Floor |
| 24 | First Floor |
| 25 | 16mm thick cement plaster in cm (1:6) finished smooth to brick masonry including racking out joints including watering, curing, cost, conveyance, taxes, royalties, labour with T&P etc. complete in all respect and as per the direction of Engineer-in-charge. - Ground Floor |
| 26 | First Floor |
| 27 | Cement concrete of proportion (1:2:4) in F&F using 12mm size cb/hb chips of approved quality including cost, conveyance, taxes & royalty of all materials and labour with T&P etc. complete in all respect and as per the direction of Engineer-in-charge. |
| 28 | Fixing of Vetrified Industrialtiles in floors, Trades of steps & Landing with with cement morter(1:4) with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect. |
| 29 | Fixing of Vetrified Industrialtiles in Dadoo, skirting rises of steps of 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shade of the tile including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect. |
| 30 | Fixing of Vetrified tiles in floors, Trades of steps & Landing with application of polymer modified quick set adhesive with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect. |
| 31 | Fixing of Vetrified tile in Dado with with cement morter(1:3) with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect. |
| 32 | Supplying, fitting and fixing of M.S. Gate, steel window and door, M.S. Window grills to openings and collapsible gate of approved specification and approved quality with cost, conveyance, royalty and taxes of all materials and all labour and T&P required for the work etc. complete as per the direction of Engineer-in-charge. |
| 33 | Labour charges for fitting and fixing of M.S. Gates, steel windows and doors M.W. Windows grills to openings and collapsible gate with top and bottom rails in proper position including making holes in walls RCC structures etc and making good to the damages to walls of RCC structures including mending or cutting to sizes or grooves in walls and fixing with cement concrete with hard black broken granite stone chips of 12mm to 20mm with cost of all labour and T&P required for the work etc. complete - GF |
| 34 | Supplying, fitting and fixing of Un-plasticised ply vinyl chloride (UPVC) (Fenesta/ NCL VEKA Ltd.) three track three panel sliding window 60 series duly manufactured using UPVC reinforced profile of 108mm x 45mm x 2.5mm for outer frames and window sash profile of 39mm x 58mm x 2.5mm capable mounting single glazing system structurally reinforced with hot dip galvanized upto 50 microns of minimum thickness of 1.5mm prefabricated and welded through fusion welding the window frame shall be fitted with 6mm thick clear toughened glass of saint gobain made duly fixed with EPDM weathering seal resistance and the system is to be installed at the site using reinforced large coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at the site etc including cost, conveyance of all materials, accessories, labour charges materials and products conforming to ASTM D-368-14, EN-477-95 and other applicable codes and standards. |
| 35 | Dressed seasoned sal wood work wrought & put up, framed and fixed inframes of doors, windows and beams, including cutting gruves, drilling holes, mending to size, etc. including cost of all materials & labour with T&P etc. complete in all respect. - Ground Floor |
| 36 | 32mm thick Flush Door with all labour, iron fittings and wooden hinged cleats etc. fitted and fixed complete in all respect including cost of all fitting materials etc complete. and as per the direction of Engineer-in-charge. - Ground Floor |
| 37 | Painting two coats with any approved enamel paint over a coat of primer to new wood work and iron work including sand papering, polishing the surface smooth with cost, conveyance, taxes of all materials and labour with T&P required for the work as per the direction of Engineer-in-charge. |
| 38 | First Floor |
| 39 | Finishing wall surface with Acrylic wall putty of approved make & finished smooth & even surface to receive painting including cost of scaffolding staging charges with cost of all materials, taxes, labour with T&P etc. complete in all floors as per the direction as per the direction of Engineer-in-charge. |
| 40 | Painting two coats with any approved plastic emulsion paintto interior wall surface including cost of all materials and labour with T&P etc complete in all respect as per the direction as per the direction of Engineer-in-charge -Ground Floor |
| 41 | First Floor |
| 42 | Painting Two coat with Weather coatpaint over a coat of primer of approved shed of approvedcolourover prepared surfaces including scuffolding to outside walls, including cost and conveyance royalty and taxes of all materials and labour with T&P required for the worketc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge - Ground Floor |
| 43 | First Floor |
| 44 | Supplying, fitting, fixing of Stainless steel of 304 grade in hand railing using 50mm dia. of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. c/c and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in staircase as per approved design and specification, buffing, polishing etc. with cost, conveyance, taxes of all materials, labour, T&P etc. complete as per direction of Engineer in Charge. |
| 45 | E.I. Work - Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC flexible conduit with 6Amp ,250V Modular switch ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, Metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard) - Group-A-L.P- 10F.P- C.B.P- |
| 46 | Group-B L.P- 25 F.P- 10 C.B.P- |
| 47 | Group-CL.P- 31F.P- 18 C.B.P-4 |
| 48 | Supply and fixing of 6Amp plugwith 6Amp switch on existing board (Modulartype ) |
| 49 | Supply and fixing of Modularmetal box on surface or in recess with suitable size of Modular coverin front including providing and fixing of6Amp and6Amp Modular switches connection(make-Anchor/ Legrand /Roma) |
| 50 | Supply and fixing of Modularmetal box on surface or in recess with suitable size of Modular coverin front including providing and fixing of 6pin 6Amp& 16Amp socket outlet and16Amp Modular switches connection(make-Anchor/ Legrand /Roma) |
| 51 | Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in surface /recessed PVC conduit as required (make of wire -Finolex/L&T/Anchor/Havells/V-Guard) - 2 X 2.5sq.mm +1 X 1.5sqmm |
| 52 | 2 X 4sq.mm +1 X 1.5sqmm. |
| 53 | 2 X 6sq.mm +1 X 2.5sqmm. |
| 54 | Supply and fixing of superior type call bell of ISI marked, on 6\" X4\"conforming to IS-2268/1994 and bell push of ISI marked , conforming to IS-1293/1988 (make-Cona/Anchor) Modular - (Ding Dong) call bell |
| 55 | Supply and fixing Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required - Standard earthingas per Govt. spcn. |
| 56 | Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-HPL/ Havells/ Legrand /L&T/C&S.) - (2+8)way,Double door |
| 57 | Supply and fixing of 5Amp to 32A rating 240V \"B\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S) - Single pole (SP) |
| 58 | 63 Amp DP MCB |
| 59 | Supply ,installation, testing and commissioning of main switches (IS 13940 part-3/1993 ) of following capacity on existing surface/wall mounting and completer with HRC fuse links, interconnections, earthing etc. as required(Make-Seimens/ HPL/ Anchor/ L&T/Havells/C&S/RK) - 63Amp ICDP main switches with MS board |
| 60 | Supply and fixing of different type of fitting with lamp- S/F of 20W 4\"LED fitting Surface LED Light fitting (Make-Havells/Philips/C&S/Crompton) |
| 61 | S/F of 36W 2\"X2\" Surface/recessed on Ceiling LED fitting (Make-Havells/Philips/C&S/Crompton) |
| 62 | S/F of 12Watt Circular Surface down lightLED fitting (Make-Havells/Philips/C&S/Crompton) |
| 63 | S/F of 60W LED street light fitting (Make-Havells/Philips/C&S/Crompton) |
| 64 | S/F of G.I. Street light Bracket with M.S. Clamp |
| 65 | Supply and fixing of fan (make-Usha/Orient/V-Guard/Khaitan/Havells/Crompton/Almonard) - S/F of 1200mm High speed Ceiling fan, Heavy Duty,durable, copper winding,Aluminium blade(ISI mark)Crompton Grave/Khaitan/Orient/Polycab/Bajaj |
| 66 | Exhaust fan 12\" size |
| 67 | Supply and fixing of Modularfan regulator(Cona/ Anchor/ Usha/Bajaj) - Electronics step type Regulator (Modular type) |
| 68 | S/F of PVC T/C U.Balmn. Wire with No.10/12SWG G.I supporting wire - 6mm2 Almn. Wire |
| 69 | S/F of No.8 G.I wire as earth continuity |
| 70 | Supply and fixing of 32Amp FT/DP switch (Make-Cona/Anchor) |
| 71 | S/F of Multipurpose boardconsisting 2nos. 6Amp plug and switch with all connections (Modular type) |
| 72 | Portable Fire Extinguisher System Supplying, Installation,testing & commissioning of CO2 type Fire Extinguisher 4.5KG Capacity confirming to IS- 2878 made from ISI marked seamless cylinderconfirming to IS- 7285 made from ISI marked controlled valveconfirming to IS- 3224 high pressure 1mtr discharge hose & iron complete with initial gas charges with carrying handle & wall mounting bracket as per direction of EIC. |
| 73 | Illuminated Signage |
| 74 | Supply and drawing of following size PVC insulated single core multistrand copper conductor in existingsurface/recessed/STEEL / conduit as required - 1 X 1.5sqmm |
| 75 | AIR TERMINAL & ACCESSORRIES LIGHTNING ARRESTER+ MAST:Providing and fixing of lightning conductor finial made of 25 mm dia 300 mm long, G.I tube,having single prong at top, with 85 mm dia 3 mm thick G.I base plate including holes etc complete as required with as per direction of Engg.-in-Charge.(RATE REFERING OSR 2018 SOR NO-4.2) .The entire LA systemshould be Replacement Warranty will be 5 years |
| 76 | Reveting, sweating and soldering of copper / G.I. tape ( with another copper / G.I. tape, base of the final or any other metallic object) as required .as per direction of Engg.-in-Charge. (RATE REFERING OSR 2018 SOR NO-4.4) The entire LA systemshould be Replacement Warranty will be 5 years |
| 77 | Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run) as per direction of Engg.-in-Charge.(RATE REFERING OSR 2018 SOR NO-4.7)The entire LA systemshould be Replacement Warranty will be 5 years |
| 78 | Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For virticalrun) as per direction of Engg.-in-Charge. (RATE REFERING OSR 2018 SOR NO-4.8) The entire LA systemshould be Replacement Warranty will be 5 years |
| 79 | Providing and fixing of testing joint, made of 20 mm x 3 mm thick G.I. strip, 125 long with 4 nos of G.I. bolts, check nuts and spring washer etc complete as required as per direction of Engg.-in-Charge. (RATE REFERING OSR 2018 SOR NO-4.12) The entire LA systemshould be Replacement Warranty will be 5 years |
| 80 | Providing and laying of G.I. tape 32 mm x 6 mm from earth electrode directly in ground as required as per direction of Engg.-in-Charge. .(RATE REFERING OSR 2018 SOR NO-4.14) The entire LA systemshould be Replacement Warranty will be 5 years |
| 81 | Maintenance free Safe Earthing Electrodeswith ISI G.I. pipe dia 75mm as Secondary electrode with wall thickness of 2.6 mm and the Primary Earthing Electrode will be 50mm X 6mm X 1no M.S. hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the Primary Earthing and the secondary Earthing, the Surface Area in will be 7,06,500sqmm for 3mtrs length and Cross Sectional Primary conducting area is 300 sq.mm. An Solid G.I. Base platseals the unit at the bottom.as per direction of Engg.-in-Charge. (MES-GFC ground Filling compound will be provided in 25 kgs Bags.)(MES-GFC ground Filling compound will be provided in 25 kgs Bags.)(2 bags required for each earthing electrode.)(FOR lightening protection & Building Electrification).The entire earthing systemshould be Replacement Warranty will be 5 years.Make-OBO/Star-x/ABB or equievalant reputed make & model A catogory. |
| 82 | P.H. Work : Supplying allmaterials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to CPVC/UPVC ASTM-F- 1785/89 (Sch-80) and pipe fittings of the following nominal borewith clamps including making good the wall , ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. - 40mm UPVC ASTMpipes |
| 83 | In First floor - 20 mm CPVC pipes |
| 84 | 25 mm CPVCpipes |
| 85 | 32 mm CPVC pipes |
| 86 | In Second floor - 40 mm UPVC pipes |
| 87 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings etc. all complete as per P.H. specification and direction of E.I.C. - 250 mm thick wall in FF |
| 88 | supplying all materials, labour, T&P and cutting holes in R.C.C. floors, roofs, erc. up to 19 Cm. thick for passing G.I. Pipes and fittings/ P.V.C. pipes and fittings etc. and reparing the holes after insertion of pipes etc. with cement concrete (1:2:4) including finishing complete so as to make it leak proof as perdirection of E.I.C. - In first floor |
| 89 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. - In first floor |
| 90 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge - 15mm dia long body Sink cock (Plaza/Aquaatic/Amber) |
| 91 | 15mm dia long body Bib Cock cock(Plaza/Aquaatic/Amber) |
| 92 | 15mm dia short body Bib Cock cock (Plaza/Aquaatic/Amber) |
| 93 | 15mm dia. C.P angle stop cock(Plaza/Aquaatic/Amber) |
| 94 | 20mm dia CP concealed stop cock(Plaza/Aquaatic/Amber) |
| 95 | 15mm dia CP Pillar cock (Plaza/Aquaatic/Amber) |
| 96 | 15mm dia CP Health faucet(Plaza/Aquaatic/Amber) |
| 97 | 15mm dia Two way Bib Cock (Plaza/Aquaatic/Amber) |
| 98 | 15mm CP revolving shower with 15mm x 225mm long CP shower arm |
| 99 | 25mm dia brass or gun metal full way valve(shakti make) |
| 100 | 32mm dia brass or gun metal full way valve(shakti make) |
| 101 | 40mm dia brass or gun metal full way valve(shakti make) |
| 102 | 15mm dia CP Flange |
| 103 | 15mm dia CP Extention Nipple |
| 104 | 125mm CP grating |
| 105 | Supplying all materials, labour, T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701--1996 including cutting holes through the tank and fixing mild steel ltubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting up to a height of 5 meters above ground level and placing the tank to the required position and providing 1st class Fly ash.Brick work in cement mortar (1:6) of 0.46mt. height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C.slab of size 1.60mt.x1.60mt. and 0.10mt. thick, R.C.C.beam of 0.25mt.x0.30mt. and 2.60mt. average length in cement concrete (1:2:4) using 12mm size h.g.chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge - 2000 litre capacity water storage tanks -In Second floor |
| 106 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge - 110mm diameter U-PVC SWR pipes(Oriplast type-A/Supreme) |
| 107 | 110mm U-PVCdoor Tee |
| 108 | 110mm U-PVCPlain Tee |
| 109 | 110mm U-PVC offset |
| 110 | 110mm U-PVCdoor bend |
| 111 | 110mm U-PVCPlain bend |
| 112 | 110mm U-PVCplain shoe bend |
| 113 | 110mm U-PVC cowl |
| 114 | 110mm UPVC P-trap |
| 115 | 110mm UPVC Clamp |
| 116 | Supplying all materials,labour T&P and cutting holels through existing brick or laterite masonry wall for taking H.C.I pipes and fittings including making good the damages etc. all complete as per P.H.Specification and direction of the Engineer in charge - 250mm to 375mm thick wall |
| 117 | Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking H.C.I pipes and making good the damages etc all complete as per P.H.Specification and direction of the Engineer in charge - 250mm to 375mm thick wall |
| 118 | Supplying all materials, labour T&P and and fixing 10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main etc all complete as per the specification and direction of the Engineer in charge - 10 Liters capacity PVC cistern with 32mm dia flush bend(Parryware/Hindware/Neycer/Rak) |
| 119 | Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan / Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal all complete as per specification and direction of the Engineer in charge - 580mm size Orissa pan (Parryware / Nycer make ) |
| 120 | Supplying all materials,labour,T&P and fixing the following vitreous china wash down water closet(European type W.C.pan) with integral \"P\" or \"S\" trap to the fllor with wooden plugs and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar(1:1)fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc.all complete as per specification and direction of the Engineer-in-charge - E.W.C. with seat cover (Parryware/Hindware/Neycer) |
| 121 | Supplying all materials,labour, T&P and fixing laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs,screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge - 600mmx450mmx250mm size Stainless Steel Sink (Jayana Make) |
| 122 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks (Plaza make)and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge - 550mm x 400mm size W. H. Basin with Porcelain Pedestal (Parryware/Hindware/Neycer) |
| 123 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer in charge - 600mm x 450mm size B.E mirror |
| 124 | Supplying all materials, labour, T&P and fixing standard size glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification anddirection of the Engineer in charge - 600mmx125mm glass shelf with CP/NP guard rails |
| 125 | Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete withCP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge - 25mmx600mm long CP towel Ring |
| 126 | CP Towel Rail |
| 127 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge - CP soap holder |
| 128 | Supplying fitting and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of MS tube of 19 gauge thickness and size of 19mmx19mm for stile & 15mmx15mm for top and bolt rails set with PVC door frame(Choukatha)of size 50mmx47mm is made out of 5cm thick sheet properly joined with solvent cement adhesive as per section view with MS square tube of 19mm of 19mm gauge to be inserted inside to give extra structural strength the price is inclusive of all cost of all materials labour,T&P etc.complete in all respect as per direction of the Engineer-in-charge - Shutter - |
| 129 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as aper specification and direction of the E.I.C. - In First Floor |
| 130 | Supplying all materils, labour, T&P providing ceramic tile in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement 1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer-in-charge(size 30x30cm to be pre-approved by the EIC) - In first floor - |
| 131 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4)on brickwork inclding watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge - In first floor - |
| 132 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge(size 45x30cmto be pre-approved by the EIC).In ground floor - |
| 133 | Supplying all materials, labour, T & P and constructing Gully trap chamber of the following inside size with 8 cm thick R.C.C. precast cover slab in CC (1:2:4) mix using 12mm size h.g. chips, foundation concrete (1:4:8) using 40mm size h.g. metal on bed aound trap , Fly ash. brickwork in CM ( 1:6) in P&F and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mm x100mm size gully trap, 150mm x150mm C.I gratig etc. all complete as per aproved drawing , specification and direction of Engineer in charge - 250mmx250mm with RCC cover |
| 134 | Supplying all materials, labour, T & P and constructing Inspection chamber of the following inside size with CC (1:3:6) mix using 40mm size h.g. metal on bed, Ist class Fly ash. brickwork in CM ( 1:6) , moulding and shaping the channel inside and benching with CC (1:2:4) using 12mm size h.g. chips, 12mm thick cement plastering (1:3) finished with punning to inside , cement flush pointing (1:3) to outside , R.C.C. cover slab in ( 1:2:4) using 12mm size h.g. chips with RCC man hole cover , earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering ,curing, conveyance of all materials to worksite , payment of royality , taxesetc. all complete as per aproved drawing , specification and direction of Engineer in charge - Inside size 760mm x760mm x460mm |
