|
| 1 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : |
| 2 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 3 | Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : |
| 4 | 20 mm dia |
| 5 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 6 | 150x10 mm |
| 7 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 8 | 100 mm |
| 9 | Providing and fixing bright /matt finished Stainless Steel handlesof approved quality & make with necessary screws etc allcomplete. |
| 10 | 125 mm |
| 11 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 12 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 13 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc.,of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 14 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Minimum size of tiles not less than 450 x 300 mm |
| 15 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. |
| 16 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. |
| 17 | Size of Tile 600x600 mm |
| 18 | Dismantling W.C. Pan of all sizes including disposal ofdismantled materials i/c malba all complete as per directionsof Engineer-in- Charge. |
| 19 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 20 | For thickness of tiles 10 mm to 25 mm |
| 21 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 22 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 23 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : |
| 24 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 25 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe |
| 26 | 32 mm dia |
| 27 | Providing and fixing floor mounted, white vitreous china singlepiece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated whitevitreous china cistern of capacity 10 litres with dual flushingsystem, including all fittings and fixtures with seat cover, cisternfittings, nuts, bolts and gasket etc including making connectionwith the existing P/S trap, complete in all respect as perdirections of Engineer-in-Charge. |
| 28 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good thewalls etc. |
| 29 | 20 mm nominal outer dia Pipes |
| 30 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length |
| 31 | 15 mm nominal bore |
| 32 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 33 | 15 mm nominal bore |
| 34 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 35 | 15 mm nominal bore |
| 36 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 37 | 15 mm nominal bore |
| 38 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore |
| 39 | 15mm nominal bore |
| 40 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : For fixed portion |
| 41 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 42 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 43 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 44 | With float glass panes of 5.50 mm thickness |
| 45 | Providing and fixing factory made Kitchen Cabinet Shutter/Partition20 mm nominal thickness of approved shade, quality and make,made from rigid foam sheets (Single extruded) having density 600Kg/cum and laminated on both side by laminate Sheet/PVC foillamination. The exposed edges shall be sealed with PVC edgebeading of same shade and colour. The shutter shall be fireretardenthaving necessary screw holding capacity. Shutter shall be fixed toframe using approved hinges with necessary stainless steel screws,all complete as per direction of Engineer-in-charge. |
| 46 | Add Cost Index @ 34.95% on DSR Items i.e.Rs.648077/- |
| 47 | Less @ 9.5% on DSR Items i.e.Rs.874580/- |
| 48 | Providing and fixing steel soft closing hinge for cabinet and cupboards shutters of approved make Godrej or equivalent with necessary steel screws etc. complete : |
| 49 | Providing and fixing 8 mm dia C.P. / S.S. hand shower with flexible tube upto1metrelongquality and make as approved by Engineer - in - charge. |
| 50 | Providing and fixing C.P. Grating of approved design & quality circular type 100 mm dia complete asper direction of Engineer - in -charge. |
| 51 | Providing and fixing looking mirror of size 600 x 600 mmfixed with laminated bolck boardwith glass shelves including all necessary fittingscomplete as per direction of Engineer-in-charge |
| 52 | Providing and fixing wash basin of size 600 x 480 mmfixed on laminated bolck board stand withshelves including all necessary fittingscomplete as per direction of Engineer-in-charge |
