|
| 1 | Earth work in bulk excavation over areas exceeding 30cm in depth 1.5 mtr. In width as well as 10 sqm. On plan including disposal lead upto 50mtr. From cutting edge. |
| 2 | All Kinds of soil @ 60% |
| 3 | Hard rockby Chesiling@ 40% |
| 4 | Earth work in excavation by manual means in trenches for foundations, drains,pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspitsand the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: Description |
| 5 | All Kinds of soil @ 60% |
| 6 | Hard rockby Chesiling@ 40% |
| 7 | Providing and laying of soling stone 15cm thich hand packed well including cost of stone. |
| 8 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 5.3.11:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size |
| 10 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level 5.22A.1Mild steel and medium tensile steel bars 5.22A.2Hard drawn steel wire 5.22A.3Cold twisted bars 5.22A.4Hot rolled deformed bars 5.22A.5Hard drawn steel wire fabric 5.22A.6Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 12 | Providing & fixing upto floor five level precast cement concretesolid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost ofrequiredcentring,shuttering and curing complete 4.10.31:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal |
| 13 | Filling of available Earth behind Plinth wall includingramming and consolidation complete. |
| 14 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size). |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 16 | Foundations, footings, bases of columns, etc. for mass concrete |
| 17 | Suspended floors, roofs, landings, balconies and access platform |
| 18 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 19 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 20 | Stairs, (excluding landings) except spiral-staircases |
| 21 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 22 | Random rubble masonry with hard stone in foundation and plinthwith Dry stoneupto plinth level with : |
| 23 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
| 24 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood |
| 25 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).Second kail wood |
| 26 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 9.10.1 Second class teak wood 9.10.2 First class deodar wood 9.10.3 Second class deodar wood 9.10.4 First class kail wood 9.10.5Second class Kail wood |
| 27 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : |
| 28 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding |
| 29 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 125x65x2.12 mm |
| 30 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : |
| 31 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 32 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 33 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 34 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 35 | 20mm cement plaster finished with a floating coat of neat cement of mix : 13.9.11 : 3 ( 1 cement : 3 fine sand) 13.9.21 : 4 ( 1 cement : 4 fine sand) |
| 36 | 12mm Cement plaster of mix: 13.1.11 : 4 ( 1 cement : 4 fine sand) |
| 37 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 38 | Providing and applying 2mm thick Cement based wall Putty over plastered surface. |
| 39 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. Two or more coats on new work |
| 40 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer |
| 41 | New work (Two or more coats applied @ 3.84 kg/10 sqm) sqm 91.25 |
| 42 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture |
| 43 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture |
| 44 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 45 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 46 | 10 litre capacity - White each |
| 47 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. |
| 48 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. each |
| 49 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo / Fir wood |
| 50 | Providing and fixing of T&G Panelling for wall including all fixcing complete.12mm Thick Budloo wood.includingproviding thermal insulation on inner side of wall by way of using wooden pannelling anf rock wool , |
| 51 | Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointedwith grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete. |
| 52 | Providing and fixing thermal insulation with specified wool and density conforming to IS: 8183, 50 mm thick, wrapped in 200G Virgin Polythene bags fixed to walls with screws, rawl plugs and washers and held in position by criss-crossing GI wire etc. complete as per directions of Engineer-in-charge. 12.52.2With resin bonded rock wool with density 48 kg/cum |
| 53 | Polishing on wood work with readymade wax polish of approved brand and manufacture on old work. |
| 54 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. |
| 55 | 19.2.2.3 PN-16 pipe , 25mm OD(SDR-7.4) |
| 56 | 19.2.2.4 PN-16 pipe , 32mm OD(SDR-7.4) 19 |
| 57 | Providing and fixing brass bib cock of approved quality. 19.9.1 15 mm nominal bore 19.9.2 20 mm nominal bore |
| 58 | Providing and fixing brass bib cock of approved quality. 19.9.1 15 mm nominal bore 19.9.2 20 mm nominal bore |
| 59 | Providing and fixing uplasticized PVC connection pipe with brass unions 19.15.1 30 cm length20mm nominal bore. |
| 60 | 45 cm length20mm nominal bore. |
| 61 | Providing laying and fixing of PVC conduit for Electricity wire 25mm dia in RCC Slab.including all fixing accessories likes bends junction etc.all complete. |
| 62 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 63 | Providing laying and fixing of PVC soil Pipe 100mm Dia of approved brand and maufacture including all fixing accessories Like Bends.Lbows T-Junction and Door Junction Etc. Complete all. |
| 64 | Providing laying and fixing of PVC Waist Pipe 75mm Dia of approved brand and maufacture including all fixing accessories Like Bends.Lbows T-Junction and Door Junction Etc. Complete all. |
| 65 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests each 5421.50 |
| 66 | Carriage of sand and bagree for an average Lead of 07Km By M.T |
| 67 | Carriage of Cementfor an average Lead of 30Km By M.T |
