|
| 1 | Raking out joints in lime or cement mortar and preparing the surface for repainting or replastering including disposal of rubbish to the dumping ground within 50 mts. lead. |
| 2 | Dismantling tiled roofing (mangalore or pot or country tiles) with battens etc. complete including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead. |
| 3 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 4 | Renewing wooden battens in roofs including making good the holes in walls & painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 meter lead : |
| 5 | Jamba wood beams |
| 6 | Providing & fixing 20 mm caves barge boards 2nd class matti wood |
| 7 | Fixing 20mm caves barge boarads 2nd class matti wood (Eaves barge boards will be available at site) |
| 8 | Supply of mangalore ridge tiles including loading, unloading and transportation complete. |
| 9 | Laying manglore roofing tiles, ridges, valleys etc. complete on roofs over existing battens rafters etc. (Tiles to be issued by the department). |
| 10 | Laying mangalore tile roof covering with 25 x 50 mm jamba wood or similar battern including nail etc. complete (mangalore tiles will be supplied by the department free of cost). |
| 11 | Providing and laying 1st class mangalore tile roof covering with 25 x 50mm (1” x 2”) jamba wood or similar batten including nails etc. but excluding rafters. |
| 12 | Providing angular fillets 7.5 x 7.5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone) aggregate 20mm nominal size) |
| 13 | Painting 2 coats with oil type wood preservative of approved brand & manufacture on new work. |
| 14 | Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade. |
| 15 | Providing & laying cement concrete 1:4:8 (1 cement 4 : coarse sand : 8 river pebbles aggregates 40 mm. nominal size) excluding cost of centering, shuttering and finishing in: |
| 16 | b In retaining walls , return walls(any thk) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc, upto floor five level. |
| 17 | 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge. |
| 18 | Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete. |
