|
| 1 | Taking down chowkats or frame with shutter (without taking off shutter from the frame)not exc 1.5 sqm each complete all as specified and as directed. |
| 2 | Taking down cement plaster onbrick or concretewalls, etc including raking out joints, hackingfor key, scrubbing down with water etc.conc block wall complete all as specified and as directed. |
| 3 | Demolition of (unreinforced) cement concerete in ground floors and paving not exc 15cm thickness (below or above GL) complete all as specified and as directed. |
| 4 | M & L fornon skid coloured ceramic tiles 7 to 8 mm thick (suare/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match colour tiles Including15mm thick screed bed or bedding layer in cement mortar(1:6) for laying floor finishes and dismantling floor hearth including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as specified and directed. |
| 5 | M & L forglazed ceramic coloured tiles in vertical surface 350X250X7mm/450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10mm thickin cement mortar(1:4) for fixing wall tiles and dismantlingwall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as specified and directed.. |
| 6 | M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top:-(i) Taking out old roof treatment and roughening the same old concrete slab by picking, sweeping clean and washing down with water to remove dust etc.(ii) Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying as in roof slab with mixing of WPC and surface finished fare and smooth without using extra cement. (Note: WPC shall be measured and paid for under separate items)(iii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.25ltr /Sqm conforming to IS:3384-1986.(iv) APP based polymeric membrane 3mm thick (minimum),weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) shall be less applied over bituminous primer as specified above over aApplication of polymeric membrance shall by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction.(v) Applying one coat of aluminum paint over the APP modified membrance @ 0.11Kg/sqm. |
| 7 | M&L rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4 using water proofing compound @ 2% by weight or cement as per manufacture instruction and finishing even and smooth without using extra cement all as specified. |
| 8 | M&L rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finishing even and smooth without using extra cement complete all as specified and as directed. |
| 9 | Supply of Integral WaterProofing Compound ISI Marked. |
| 10 | M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper with 2 mm wall care putty complete all as specified and directed. |
| 11 | M&L preparation of old plastered surfaces with washing, rubbing down and stopping of distemperedand applying two coat of oil bound distemper over 2 mm wall care puttycomplete all as specified |
| 12 | M&L for preparation of surfaces of newly plastered surface and applying two coats ofweather proofpaint (Exterior grade) over a coat ofalkali resistant primerr complete all as specified and directed. |
| 13 | M&L for preparation of surfaces of oldplastered surface and applying two coats ofweather proofpaint (Exterior grade) over a coat ofalkali resistant primerr complete all as specified and directed. |
| 14 | M&L preparation of old plaster surfaces, chalk whiting and applying two coat of white wash on ceilings complete all as specified |
| 15 | M&L for PCC(1:3:6), type C-2, using 40 mm graded aggregate and finished the surface fair and even without using extra cement, 75 mm thick in plinth protection. |
| 16 | M&L for PCC(1:3:6), type C-2, using 40 mm graded aggregate in surface channel and drain including nasessary form work complete all as specified and as directed. |
| 17 | M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, mould, mitred stop ends etc all as directed. |
| 18 | M&L for onecoats synthetic enamel paint over old paintedwoodensurfaces of any description not otherwise described over 10 cm including preparation of old paintedsteelsurfaces complete all as specified and as directed. |
| 19 | M&L for onecoats synthetic enamel paint over old paintedsteelsurfaces of any description not otherwise described over 10 cm including preparation of old paintedsteelsurfaces complete all as specified and as directed. |
| 20 | Hacking out old glass(any thickness,size,quality or description) from wooden frams ,glazed with putty or fixed with beads. |
| 21 | S&F 3 mm thick sheet glass, ordinary quality and glazing with beading or oil putty in square n.exc 0.5 Sqm in each pane including fixed with wooden beads/glazing pins or spring clips in wooden or metal frames complete all as specified and as directed. |
| 22 | S&F Frostedglass 3 mm thick, glazing with beading or oil putty in square n.exc 0.5 Sqm in each pane including fixed with wooden beads/glazing pins or spring clips in wooden or metal frames complete all as specified and as directed. |
| 23 | S&F as in repairfor galvanized mild steel wire cloth, 0.56mm nominal dia of wrie and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples complete all as specified and directed. |
| 24 | S&F solid PVC door frame of size50 mm x 47 mm made out of 5 mm plain co lour PVC sheet reinforced with M.S square tube, fixed in opening as per specification & drawing shown in section 8 of SSR Part II complete all as specified & directed. |
| 25 | S&F 30 mm thick factory made solid panel PVC doorshutters consisting of frame made out of M.S tubes for top& bottom rails M.S frame shutters shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet trip of 20mm width stuck inside with solvent cement for stiles and plain co lour PVC sheet for top lock rail and bottomrail on either side and as gap insert for top rail with suitable and bottom rails .Paneling of plain co lour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles and rails with suitable PVC sheets beading and jointed together with solvent cement and fixing in the frame at site as per specification & drawing shown in section 8 of SSR Part II. |
| 26 | S&F 100mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed. |
| 27 | S&F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed. |
| 28 | S & F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 29 | Supply and fix for GI tubing medium grade with all fittings fixed to walls or laid in floors 15 mm bore including taking up and down 15 mm bore GI tubing and connections including cleaning for refixing or remove to store complete all as specified and as directed. |
| 30 | Supply and fix for GI tubing medioum grade with all fittings fixed to walls or laid in floors 20 mm bore including Taking up and down 20mm bore GI tubing and connections including cleaning for refixing or remove to store complete all as specified and as directed. |
| 31 | Supply and fix, as in repair, 15 mm bore bib taps, cast copper alloy, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed. |
| 32 | Supply and fix, as in repair 15 mm bore stop valves best copper alloy screwed down high pressured with batter.fly nuts handle screwed bolts ends for iron pipes fancy type choromium plate complete all as specified and as directed. |
| 33 | Supply and fix, as in repair 15 mm bore gate valves best copper alloy screwed down high pressured with batter.fly nuts handle screwed bolts ends for iron pipes fancy type choromium plate complete all as specified and as directed. |
| 34 | Supply and fix,as in repair 20 mm bore gate valves best copper alloy screwed down high pressured with batter.fly nuts handle screwed bolts ends for iron pipes fancy type choromium plate complete all as specified and as directed. |
| 35 | Supply and fix as in repairbrass chromiom plate tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed. |
| 36 | Supply and fix, as in repair, PVC (SWR) pipes 110mm bore single socketed , in any length with rubber ring joints , laid in trenches or in floors all as specified and directed. |
| 37 | Supply and fix,as in repairPVC (SWR ) Bend 110mm bore complete all as specified and as directed. |
| 38 | Supply and fix,as in repairPVC (SWR ) vent cowel 110mm bore complete all as specified and as directed. |
| 39 | Supply and fix,as in repairPVC 10 Ltrs capacity valve less syphonic action type flushing cistern, low level whitewith inlet ball, valve, float and handle including bracket , flush pipe of polyethylene of low or high density or PVC pipe 32mm dia for low level cistern including PVC connection 15mm dia sizes with PTMT nuts of length 300 mm complete all as specified & directed. |
| 40 | Supply and fix,as in repair Vitreous China wash downwater closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 41 | Supply and fix, 1000 Ltr Rotational moulded polythylene water storage tanks (cylindrical vertical with closed top hoisted and fixed in position including fixing of float ball) including dismantling and removing all as specified in SSR part I complete all as specified and as directed. |
| 42 | Supplyand fix as inrepairVitreous china wash hand basin, white, flat back of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, as in repairs, complete all as specified and as directed by Engineer-in-Charge.\" |
| 43 | Supplyand fix as inrepair 15mm bore fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. . |
| 44 | S&F in repair 600mmx450mm bevelled edge mirror ofselected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 45 | Supply and fixHarrison rails, mild steel, chromium plated with fixing brackets stops, rollers complete all as specified and as directed. |
| 46 | S&F in repair Health Faucet (ABS) with 120cm PVC flexible tube & ABS wall hook complete all as specified and as directed. |
| 47 | S&F for shower arm 15mm size 195mm long with bend of 45 degree with flange of PTMT any colour (mininum weight 40gms) complete all as specified & directed. |
| 48 | Taking down chowkhats or frame with shutter without taking off shutter from the frame exc 1.50 sqm but not exc 4 sqm each & removing from site complete all as specified and directed. |
| 49 | S&F MS flat iron such as small articles for hold fast and similar work all as specified and as directed by Engineer-In-Charge. |
| 50 | M&L PCC 1:3:6type C1 (20mm graded Aggregate) for fixing hold fast complete all as specified. |
| 51 | Supply and fixing2nd class HW plain solid straight chowkhats/frame wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 52 | M & L for 4mm thick ( 03 Nos ply)Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on onefaces; fixed with screws to timber frame work complete all as specified and as directed. |
| 53 | M & L for glazed ceramic coloured tiles 300 mm X 200 mm X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 10mm thick rendring in CM (1:4) on fair faces of brick or concrete surfaces finished fair and even on vertical surfaces of wallincluding dismanthing floor/hearth or wall tilling including cement mortar bedding but not backing and rubbish off premises complete all as specified and directed. |
| 54 | S & F Anodised aluminium frame powder coating (minimum thickness of powder coating50 micron) for doors, windows, ventilators, partitions etc.with one or more rebates including joining cleat fo refixing etc. complete all as specifiedand as directed. |
| 55 | S&F 18/19 mm thick block boards grade 2 quality, interior grade, commercial type fixed with screws to timber frame work complete all as specified and directed. |
| 56 | S&F 0.9mm thick decorative laminate type 1 of surface finish, colour and pattern asapproved, fixed with approved adhesive as per manufaturers instructions complete all as specified and directed. |
| 57 | S&F 2nd class HW plain fillets, square, rectangular wrought bullnosed splayed chamfered or rounded of sectional area n.exc 3 sqcm complate all as specified and directed. |
| 58 | S&F Continuous (piano) hinges, 40 mm Width of flaps (when open)in mm, mild steel, bright finish or electro galvanised all as specified and directed. |
| 59 | S&F 40 mm dia cupboard knobs fixed with with nut, screw and washer of mild steel , brightfinished complete all as specified and directed. |
| 60 | S&F brass lock cup board , 2 layers, grade-1 size 50 mm fixing in shutters complete all as specified and directed. |
| 61 | S&F 2nd class HW plain fillets square rectangular triangular in section, clean sawn secured with nails sectiona area exc 3 sqcm & n.exc 6 sqcm complete all as specified and directed. |
| 62 | S&F Sheet glass 5.5mm thick ground or obscured or frosted on one side sheet glass ordinary quality and glazing in squares exc. 0.50 sqm each pane complete all as specified and as directed. |
| 63 | S&F 12 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, fixed with screws to timber frame work, aluminium frame complete all as specified and directed. |
| 64 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 65 | M&L 12 mm thick toughened glass(frosted type) door panel with top and bottom aluminium rails and one floor door spring and top rolling hinging device incl pre drilled holes for fixing patch fittings etc. with \"D\" type handles (02 Nos) of the same glass 300 mm long complete all as specified and directed. |
| 66 | AGE E/M SCHEDULE PART - IISupply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics complete with IP66 protection with impact and corrosion resistant complete with driver and lamp and clamp of suitable size for mounting flood light complete all as specified and directed |
| 67 | S&F Steel tubular swaged pole complete with cast iron base plate, finial taper plug, bolts, nuts and screws of type 410 SP-22( 8.5 metre long) complete all as specified and directed. |
| 68 | Supply and fixing factory made IP-65 (Dust and power jet Proof according to IEC 60529) opaque street light junction box of size 240 mm x 130 mm x 95mm made of high quality polycarbonate (shock proof, rust free, corrosion free acid and chemical resistant, fire retardant having high impact(IK 08) totally insulatedmade of halogen and silica free recyclable material, UV resistant having high grade gasket made of polyurethane with copper terminal , MCB SP 6 Amps rating 10 KA with locking arrangement and 2 Nos M40 size cable glandand one M32 size gland suitable up to 35 Sqmm cable etc complete all as specified and directed. Make : Sintex/HENSEL. |
| 69 | Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways andone handle for lifting made out of 8 mm dia TMTbar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I. |
| 70 | Supply, laying XLPE insulated PVC inner sheathed, armoured with galvanized steel strip or wire heavy duty underground cable withstranded aluminumconductor 1100 volt grade of size10 Sqmm 4 Core. laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing complete all as specified and directed. |
| 71 | Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M deep and getting out in soft /loose soil for laying/removing of cable complete all as specified and directed by Engr-in-Charge. |
| 72 | Returning filling in including spreading, levelling, watering and well ramming, in layers not exceeding 25cm in soil obtained from excavation complete all as specified and directed by Engr-in-Charge. |
| 73 | Removal of surplus soil to a distance not exceeding 50 M and depositing where directedat a level not exceeding 1.5 M above starting point.complete all as specified and directed by Engr-in-Charge. |
| 74 | M&L sand cushioningfor underground cable 8cm below and 15cm above the cable withclean dry riversandin trenches including spreading, levlling etc. complete all as specified and directed by Engr-in-Charge.Note:- Punned thickness only will be measured for the purpose of payment |
| 75 | Supply and laySub class\"B\" old size well burnt brick laid flat in trenches as protection to LT cable complete all as specified and as directed |
| 76 | M&L PCC, type C1, (1:3:6, using 20mm graded stone aggregates) as in coping of poles including formwork complete all as specified and as directed including demolition of old damaged concrete from pole. |
| 77 | M&L PCC, type D2, (1:4:8, using 40mm graded stone aggregates) as in PCC/Road cutting /installation area and foundation of pole etccomplete all as specified and as directed by Engr-in-Charge. |
| 78 | Supply and fixingPVC Insulated and sheathed three core Heavy duty cables 1100 volts each core having multi stranded aluminium conductor service cable size 4 sqmm complete all as specified and directed. |
| 79 | Taking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixture and fittings suchasswitches,ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as per specified and as directed. |
| 80 | Material & Labour for concealed Point wiring with two single core 1.5 sqmm (nominal area), FRLSH, ISI marked PVC Insulatedunsheathed multistranded copper cable, 1100 volts grade including PVC Conduit of suitable size with all fittings and accessories including PVC rectangular board of suitable size, and FRLSH, ISI marked PVC insulatedunsheathed single core multistranded copper cable of size 1.5 sqmm green in colour as earth continuity conductor connected to common earth dolly for one light/fan point controlled by one way switch including cutting chases not exc 10cm girth and making good disturbed surfaces complete all as specified and directed. |
| 81 | All as per Item No. 80 above but for one multi pin socket outlet, 5 Amps on independent board, complete all as specified and directed. |
| 82 | All as per Item No. 80 above but with FRLSH, ISI marked PVC insulated and unsheathed two single core multistranded copper cable of size 4.0 sqmm for one power point ,3 pin 15 Amps on independent board including FRLSH, ISI marked PVC insulatedunsheathed single core multi-stranded copper cable of size 4.00 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. |
| 83 | S&F Switchpiano,flushtype single pole, one way 5 Amp complete all as specified and directed. |
| 84 | S&FSwitch socket combination 2 in 15A/16A, 3 pin 1 flushtype universal complete all as specified and directed. |
| 85 | S&FSwitch socket combination2 in 1,5A flushtype complete all as specified and directed. |
| 86 | M&L ceiling rose, 3 terminals PVC/polycarbonate, isolated body complete all as specified and directed. |
| 87 | Supply and fixing LED batten fitting 18 Wattfixed to wallwith 2 nos PVC block of suitable size complete all as specified and directed including taking down old unserviceable light fittings. |
| 88 | Material and labour for concealed sub main wiring with two single core 6.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 6.0 sqmm green colour as earth lead including PVC conduit of suitable size including cutting chases not exc 10cm girth and making good disturbed surfaces complete all as specified and directed, includingtaking down unservicable one.(Note: two run of 6.0 sqmm cable ,one runof earth wire of 6.0 sqmmand one run of PVC conduit shall be measured as one length). |
| 89 | Supply and fix MCCB Distribution board , 415 voltsverticle triplepole andneutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 4 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed including taking down oldunserviceable one. |
| 90 | Supply and fixing MCCBfour pole 125 Amps, 415 Voltsincluding taking down old one all as directed. |
| 91 | Supply and fix MCB Distribution board , 240 volts Singlepole andneutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed including taking down oldunserviceable one. |
| 92 | Supply and fix MCB SPN, 240 Volt, 32 Amps, 10 kA rupturing capacity \"C\" series complete all as specified and directed iIncluding taking down old one. |
| 93 | Supply and fix MCB SP, 240 Volt, 6-32 Amps, 10 kA rupturing capacity \"C\" series complete all as specified and directed iIncluding taking down old one. |
| 94 | Supply and fixing PVC Exhaust fan250 mm 230 Volts Ac single phase Complete all as specified and directedincluding taking down old unserviceable one. |
| 95 | Supply, laying XLPE 50 Sqmm 3.5 Core insulated PVC inner sheathed, armoured with galvanized steel strip or wire heavy duty underground cable withstranded aluminumconductor 1100 volt grade laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing complete all as specified and directed |
| 96 | Supply and fix Air termination, single pointed, Aluminium rod 12mm dia and 300mm long complete all as specified and directed. |
| 97 | Supply and fix Aluminium strip 25 mm x 3 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed. |
| 98 | Supply and fix Galvanised iron strip 32 x 6mm buried in ground as ring main conductor complete all as specified and directed |
| 99 | Supply and fix Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed. |
