Tender For Providing And Fixing Profile Sheet Roofing In Place Of Old And Damaged Sheet Over 2 Nos. Cycle Shed At Project Office Of Bharatpur Ocp., Bharatpur-Odisha
TDR : 36056057
Tender Notice
BOQ
Expired
Bharatpur
Odisha
Tender For Providing And Fixing Profile Sheet Roofing In Place Of Old And Damaged Sheet Over 2 Nos. Cycle Shed At Project Office Of Bharatpur Ocp.
Name of Work:Providing and fixing profile sheet roofing in place of old and damaged sheet over 2 nos. cycle shed at project office of Bharatpur OCP.NIT NO:GM(BA)/SO(civil)/e-Tender/ 2022-23/953Dt 01.02.2023
Sl. No.
Item Description
1
Dismantling roofing including ridges, hips, valleys and gutters etc, and stackint the materialwithin 50 metres lead of:G.S. Sheet
2
Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distaoce within compound and stacking.
3
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per lsr 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be rupplied in single length upto 12 metre or as desired by Engineer- in-cha.ge. The sheet shall be fixed using self drilling /self tappint screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontau vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
4
Extra for providing and fixing wind t;es of 40x 6 mm flat iron section.
5
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size 5tone aggregate
6
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work
7
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work
8
Trimming and cutting of branches up to height above 10 m ground as per instruction of Engg-In-Charge (up to 5 mm to 250mm dia)
9
Carriage of cutting trees, branches by tractor including mannual loading and un loading and disposing of the Engg-In-Charge.For lead 2.00 km.
10
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in -charge Nominalconcrete 1:3:6 or richer mix (i/c equivalent design mix)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
