Tender For Upgradation Of Model Bus Terminal At Malkangiri In The District Of Malkangiri, Malkangiri-Odisha

TDR : 35853483

Tender Notice
BOQ

Expired

Malkangiri , Odisha

Tender Brief : Tender For Upgradation Of Model Bus Terminal At Malkangiri In The District Of Malkangiri

Document Fees
₹ 10000 /-

EMD
₹ 498300.0 /-

Tender Value
Refer document

Submission Date
09-02-2023

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Civil Works
2	Earth workexcavation in foundation in Hard soil including hard moorum, stoney earth, earth mixed with boulders (except sheet rock and boulders requiring blasting) with all leads and lifts for guard wall including dressing & levelling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour T&P required for the work etc. complete and as directed by the Engineer-in-charge.
3	A. Upto 1.5 Mtr Depth
4	Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.
5	Supplying & filling in foundation & plinth with sand in 23.5cm(9”) thick layers including watering & ramming with cost, conveyance, royalties,& labour with T&P required for the work etc.,complete as per direction of Engineer-in-Charge. (Measurement will be taken on finished compacted section only)
6	Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6) with 40mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
7	10 mm thick Dry khoa to receive AS flooringwell watered & rammedas per direction off the Engineer-in-charge.
8	Plain cement concrete (1:2:4) using 12mm size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with labour,labour cess and T&P etc. required for the work complete as per the direction of the Engineer-in-charge.
9	Providing, lifting, hoisting and laying Reinforced cement concrete of M-20 grade as per approved designs and drawings having a minimum compressive strength (in work test) 200 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed andcleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portlandslag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position complete as per direction of Engineer-In -Charge.
10	Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed andcleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portlandslag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position complete as per direction of Engineer-In -Charge.
11	A. Foundation & Plinth
12	a.Column Footing
13	MAIN BUILDING
14	BUS STAND AREA
15	b. PLINTH BEAM
16	B. Column shaft
17	Ground Floor
18	First Floor
19	Second Floor
20	C. Lintel
21	Ground Floor
22	First Floor
23	Second Floor
24	D.ROOF BEAM
25	Ground Floor
26	First Floor
27	Second Floor
28	E. Stair Case
29	Ground Floor
30	First Floor
31	F. Roof slab
32	Ground Floor
33	First Floor
34	Second Floor
35	G. Chajja
36	Ground Floor
37	First Floor
38	Second Floor
39	Supplying, Cutting, Straightening coiled or bent up M.S. rods or Tor steel of SAIL(HYSD Fe-500) welding or jointing if necessary, bending, binding, tying the grills and laying in position as required for R.C.C. works and hoisting, lowering and placing in position in all floors according to approved designs and drawings including cost, conveyance,of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P etc. complete in all respect as directed by the Engineer-in-charge All reinforcement steel and structural steel shall be procured from primary producers of steel-SAIL/RINL/TATA/JINDAL(Panther)/SHYAM STEEL.
40	Ground Floor
41	First Floor
42	Second Floor
43	Brickwork with Fly ash bricks in cement mortar (1:6) in F&P (23cm x 11cm x 8 cm) having minimum crushing strength not less than 75 kg.per.sq.cm. including splays cutting, circular moulding, chamfering, corbelling and similar such type of woks with all necessary projections watering and curing for 7 days after immersing the bricks in water for six hours before use etc. completeincluding cost and conveyance of all materials, labour with T&P required for the work and royalties etc. complete in all respect as per direction of Engineer in charge.
44	Brickwork with Fly ash bricks in cement mortar (1:6) in Superstructure (23cm x 11cm x 8 cm) having minimum crushing strength not less than 75 kg.per.sq.cm. including splays cutting, circular moulding, chamfering, corbelling and similar such type of woks with all necessary projections watering and curing for 7 days after immersing the bricks in water for six hours before use etc. completeincluding cost and conveyance of all materials, labour with T&P required for the workand royalties etc. complete in all respect as per direction of Engineer in charge.
45	Ground Floor
46	First Floor
47	Second Floor
48	Brickwork with Fly ash bricks in cement mortar (1:4) in Superstructure (23cm x 11cm x 8 cm) having minimum crushing strength not less than 75 kg.per.sq.cm. including splays cutting, circular moulding, chamfering, corbelling and similar such type of woks with all necessary projections watering and curing for 7 days after immersing the bricks in water for six hours before use etc. completeincluding cost and conveyance of all materials, labour with T&P required for the workand royalties etc. complete in all respect as per direction of Engineer in charge.
49	Ground Floor
50	12mm (1/2\"\") thick cement plaster in cement mortar (1:6) finished smooth to brick walls after raking out the joint including watering and curing for seven days with cost and conveyance of all materials and labour with T& P required for the workand royalities etc. complete in all respect as per direction of Engineer in charge.
51	Ground Floor
52	First Floor
53	Second Floor
54	16mm (5/8\"\") thick cement plaster (1:6) finished smooth to inside of 9\"\"/10\"\" thick brick walls after raking out the joint including watering, curing for seven days with cost and conveyance of all materials and labour with T&P required for the workand royalities etc. complete in all respect as per direction of Engineer in charge.
55	Ground Floor
56	First Floor
57	Second Floor
58	6mmthick cement plaster (1:4) finished smooth to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment including watering, curing for seven days with cost and conveyance of all materials and labour with T&P required for the work with royalities etc. complete in all respect as per direction of Engineer in charge.
59	Ground Floor
60	First Floor
61	Second Floor
62	Fixing Kota tiles in floors treads or steps and landing on 25 mm thick bed of cement mortar 1:4 jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing etc complete. as per direction of Engineer-in-charge.
63	Ground Floor
64	Fixing Chequered tiles in floorson 20 mm thick bed of cement mortar 1:4 jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing etc complete. as per direction of Engineer-in-charge.
65	Ground Floor
66	Supplying and fixing of PrepaintedSheet(0.40mm thick ) in roof in roof drilling holes in windties including fixing of ridges valleys windties etc. including cost of fitting complete in all respect and as per direction of Engineer-in-charge.
67	Providing fitting and fixing of Gypsum board (12.5mm thick of size 6\"x4\" size) celling with Aluminium anodised T section No. 3215 with 2\"0\"center to center, L Section No.1705 upto 15 micron on 4 walls to be fixed by means of steel screw and PVC supended from celling etc complete in all respect and as per direction of Engineer-in-charge.
68	Supplying and fixing Rolling Shutters (RS) of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 – part 1 and M.S. top cover of required thickness for rolling shutters.
69	Supplying, fitting , fixing of HomogeneousVitrified tiles of Approved grade in floors tread or steps and landing on 20 mm thick bed of cement mortar 1:4(1cement: 4 Sand ) jointed with neat cement slurry mixed with pigments to match the shades or the tiles including rubbing and polishing etc.,complete as per direction of Engineer-in-charge.
70	Ground Floor
71	First Floor
72	Supplying, fitting , fixing of Homogeneous Vitrified tiles of premium grade in dados skirting & riser of steps on 12mm thick cement plaster 1:3 joined with neat cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance,royalties of all materials, labour with T&P complete in all respects as per direction of Engineer-in-Charge.
73	Ground Floor
74	Providing 30mm thick Flush Door shutterincluding cost of all material labours fittings , t&pcomplete in all respect as per specification and direction of the Engineer-in-charge
75	In all floors
76	Supplying, fitting , fixing of Ceramictiles of Approved grade in floors, tread or steps and landing on 20 mm thick bed of cement mortar 1:4(1cement: 4 Sand ) jointed with neat cement slurry mixed with pigments to match the shades or the tiles including rubbing and polishing etc.,complete as per direction of Engineer-in-charge.
77	Ground Floor
78	First Floor
79	Providing and laying Ceramictiles Approved grade in Dadosover 12 mm thickcement mortar 1:3(1cement: 3 Sand ) jointed with neat cement slurry mixed with pigments to match the shades or the tiles including rubbing and polishing etc.,complete including cost, conveyance,royalties of all materials, labour with T&P complete in all respects as per direction of Engineer-in-Charge.
80	Ground Floor
81	First Floor
82	Finishing wall surface of wall with wall putty (water based) of approved make and finished smooth and even surface to receive paiting including cost of scaffulding stsging changes with cost of all materials labour etc complete in all respectas per direction of Engineer In Charge.
83	Ground Floor
84	First Floor
85	Second Floor
86	Wall Painting two coats with Plastic Emulsion paint over a coat of primertonew work with all cost etc. complete in all respectas per direction of Engineer In Charge.
87	Ground Floor
88	First Floor
89	Second Floor
90	Finishing wall surface with Weather Coat two coats over a coat of primerwith any approved shade including cost, conveyance, , cess and royalties of all materials with labour and T&P required for the work etc., complete in all respectas per direction of Engineer In Charge.
91	Ground Floor
92	First Floor
93	Second Floor
94	Supplying,fitting, fixing of, MS Door, MS GATE ,M.Sgrill ,, MS Square Bar Spike to openings,tubular trusses and collapsible gateof approved specification andof approved size, materials and design with a coat of primer includingpainting two coats over a coat of redoxideprimer with cost and conveyance of all materials, labour, royality,etc. complete in all respect and as per direction of Engineer-in-charge.
95	IN ALL FLOORS
96	Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD.) Casement Door – 60- Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 102 mm x 60 mm x 2.25 mm for casement Door Sash Profile and 74 mm x 60 mm x 2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistantaccessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials andproduct conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards.
97	Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride(UPVC) ( FENESTA / NCL VEKA LTD.)Three Track - Three Panel sliding window– 60- Series duly manufactured using UPVC reinforced profiles of 108mm x 45 mm x 2.5 mm for outer frames and Window Sash of 39 mm x 58 mm x 2.5 mmcapable of mounting singleglazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistantand the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials andproduct conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards
98	Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) ( FENESTA / NCL VEKA LTD.) Ventilator/ Top Hung – 60- Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 75 mm x 60 mm x 2.25 mm for casement Window Sash Profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistantaccessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials andproduct conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards.-
99	Designing, fabricationg, supplying and fitting in position with aluminium composite panelof ACP Cladding with all cost of structural analysis and design providing, fabricating and supplying and fixing panels etc. complete as per the direction of Engineer-in-charge.
100	Supplying and fittings of Stone cladding Wall lining butch work upto 10m height with Dholpur stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width, including embedding every tenth layer and bottom most layer in masonry or concrete after making necessary chases of size 75x75 mm and by providing layer of 75 mm thick strips i/c 12 mm thick bed of cement mortar 1:3 (1 Cement : 3 coarse sand) i/c ruled pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in-charge.
101	Supplying, fitting, fixing of Stainless steel of 304 Grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mmX32mmX2mm @ 0.90mt.c/c& stainless square pipe bracing of size 32mmX32mmX2mm in 3 rows in stair case as per approved design & specification, buffing, polishing etc with cost,conveyance,, labour,T&P etc. required for the work complete in all respectin all floors as per direction of Engineer-in-Charge.
102	IN ALL FLOORS
103	Providing and fixing of 30 mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with SS 304 Grade Matt Finished3 Nos butt hinges of Size 100mm X 60mm X 2.5mm, 1 No 250mm X 16mm Aldrop,1 No 150mm x 16mmtower bolt,2 No 150mm length Door handle with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Make: WPC: Century / Black Cobra / Rajshri Plastiwood, Hardware Fittings: Godrej / Dorset / Link / Dorma)
104	IN ALL FLOORS
105	Providing and fixing 65mm X 125mm factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge.(Make: WPC Door Frame: Century/Black Cobra/Rajshri Plastiwood,Colour:Coffee Brown)
106	Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
107	IN ALL FLOORS
108	Providing & Painting with two coats synthetic enamel paint of approved brand over a coat of primer and manufacture to give an even shade as per the instruction of Engineer - In-Charge at all floors and all heights including all material & labour complete.
109	(a)Ground Floor
110	Dismantling lime concrete flooring 7.5 cm to 10 cm thick including stacking the useful materials and removing the debris within 50 m lead complete as per the direction of Engineer-In-Charge.
111	Dismantling lime concrete flooring 2.5 cmthickA.S including stacking the useful materials and removing the debris within 50 m lead complete as per the direction of Engineer-In-Charge.
112	DismantlingG.C.I sheet /A.C sheet roofing after carefully removing the bolts and nuts includingstacking the useful materials and removing the debris within 50 m lead complete as per the direction of Engineer-In-Charge.
113	Dismantling brick or stone masonary work above 3.00 m Height including stacking of useful materials and removing the debris within 50 m lead complete as per the direction of Engineer-In-Charge.
114	Dismantling Cement concrete including stacking the useful materials and removing the debris within 50 m lead complete as per the direction of Engineer-In-Charge.
115	EI Works
116	Recessedwiring to light points/fan points/Exhaust fan/call bell point with 1.5mm2 FRLS PVC insulated SC multistrand Copper conductor of ISI marked with 20 mm non-metalic PVC flexible Conduit (make-Sudhakar /Norpack/ Anchor/ AKG/ Equivalent ) with 10A. 250 V. Modular type Switch ISI marked and ceiling rose of ISI marked mounted on Modular metal Box along with modular base & cover plate with 1.5mm2 FRLS PVC insulated SC multistrand Cu. conductor as earth wire including all accessories and connections as per direction of Engineer in charge. (Make of wire-Finolex/Havells/V-Guard/Polycab/Anchor/eq)(Modular make:-Crabtree model Athena or its equivalent to LEGRAND(myrius)/L&T(Entice)/Roma)
117	Ground Floor
118	Group-A.
119	Group-B.
120	Group-C.
121	First Floor
122	Group-A.
123	Group-B.
124	Group-C.
125	Existing Building
126	Group-A.
127	Group-B.
128	Group-C.
129	Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6 Amp modular socket and 6 Amp modular switches connection.( make: Legrand / L&T /Anchor / Roma/ Great white /HPL /Eq)(a) (Group-A)
130	Ground Floor
131	First Floor
132	Existing Building
133	(b) Supplying and fixing 6 Amp plug with 6 Amp switch (Modular Type) on existing board.
134	Ground Floor
135	First Floor
136	Existing Building
137	Supply and fixing ofModular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 16 Amp socket outlet and 16 Amp Modular switches connection.(make:Legrand/L&T / Roma /Great White / HPL/Eq)
138	Ground Floor
139	First Floor
140	Existing Building
141	Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked in recess PVC conduit (make-Sudhakar/Norpack/Anchor/AKG/Equivalent) with 2 way modular switch with ISI marked, modular base of suitable size ISI marked with metal box(18 SWG) and earthing point with 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor for loop earthing etc as required.
142	Ground Floor
143	First Floor
144	Wiring for Circuit /Submain wiring alongwith earth wire with the following sizes of PVC insulated S.C. multistrand Cu.FRLS Conductor of ISI marked conforming to IS-694/1990 in 20mm dia Steel Conduit in surface/ recessed PVC Conduit as required (Make of wire-Finolex/Havells/Polycab/V-Guard/Anchor/RR-KABEL/Eq.)
145	a) 1x1.5mm2for inverter wiring.
146	b) 2x1.5mm2 + 1x1.5mm2
147	c) 2x2.5mm2 + 1x1.5mm2.
148	d) 2x4mm2 + 1x1.5mm2
149	e) 2x6mm2 + 1x2.5mm2
150	f) 4x6mm2 + 2x2.5mm2
151	g) 4x10mm2 + 2x4mm2
152	Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted4 way TPN Distribution Board For PDB/LDB suitable for 440 V, three phase, 4 wire 50 Hz AC Supply completewith bottom detachable plate for interconnections etc as below.Incommer 1 No-63AFPMCB (10KA)Outgoings-40A DP MCB 10KA-06 Nos.(Make-Legrand/Schneider/Hager/Siemens/Eq) .
153	Ground Floor
154	First Floor
155	Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted4 way TPN Distribution Board For PDB/LDB suitable for 440 V, three phase, 4 wire 50 Hz AC Supply completewith bottom detachable plate for interconnections etc as below.Incommer 1 No-40AFPMCB (10KA)Outgoings-20A DP MCB-1 No.+6-32 SP MCB 10KA-10Nos.(Make-Legrand/Schneider/Hager/Siemens/Eq) .
156	Existing Building
157	S/F. of 12Way SPN Double Door Distribution Board with 1x40A DP MCB+10x6A-32A. SP MCB of Legrand/Schneider/Hager/Siemens/Eq make.
158	Ground Floor
159	First Floor
160	S/F. of 200A.Cubical Panel board made of 18SWG C.R. sheet with powder coated with provn. Of following items with:-(Sub-Panel size:-36\"x36\"x12\") a) 200A. 36kA 4Pole MCCB of Legrand/Schneider/Hager/Siemens/Eq. make:- 01 no. b)200A. 4Pole Bus bar complete set make:-01 no. c)100A. 16kA 4Pole MCCB of Legrand/Schneider/Hager/Siemens/Eq. make:- 02 nos.(d)63A. 16kA 4Pole MCCB of Legrand/Schneider/Hager/Siemens/Eq. make:-02 No.(e) 200A.4pole Onload Changeover: 01 No.(Legrand/Schneider/Hager/Siemens/Eq. make)(f) 63A. FP MCB of Legrand/Schneider/Hager/Siemens/Eq. make:-02 nos. (g)32A 10KA DP MCBof Legrand/Schneider/Hager/Siemens/Eq. make:-02 nos. (h) Panel is to be wired with suitable 7/16 mm2 Cu. F.R. wire. (i) Panel is to be mountedon wall surface with MS Angle frame, nuts & bolts. (j) Digital Volt meter, Ammeter, RYB indicator, Selector switch, C.T.Coils,etc.(For New Building)
161	S/F. of 100A.Cubical Panel board made of 18SWG C.R. sheet with powder coated with provn. Of following items with:-(Sub-Panel size:-36\"x36\"x12\") a) 100A. 25kA 4Pole MCCB of Legrand/Schneider/Hager/Siemens/Eq. make:- 01 no. b)100A. 4Pole Bus bar complete set make:-01 no. c)63A. 16kA 4Pole MCCB of Legrand/Schneider/Hager/Siemens/Eq. make:- 03 nos.(d) 100A.4pole Onload Changeover: 01 No.(Legrand/Schneider/Hager/Siemens/Eq. make).(e)32A DP MCB of Legrand/Schneider/Hager/Siemens/Eq. make:- 02 (f) Panel is to be wired with suitable 7/16 mm2 Cu. F.R. wire. (g) Panel is to be mountedon wall surface with MS Angle frame, nuts & bolts.. (h) Digital Volt meter, Ammeter, RYB indicator, Selector switch, C.T.Coils,etc.(For Existing Building)
162	Supply, installation, testing and commissioning of Floor/Wall mounted sectionalised, front operated top entry dust and vermin proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrinkable PVC sleeve, base frame, complete with all accessories including interconnections, earth bus etc as required comprising of.One (1)-63 Amp, 10 KA,TPN (Class-C) MCB with 3 Nos Phase indicating lamps with control fuse/ MCB,Digital Voltmeter with selector switch. DOL starter with O/L and Single Phasing Preventor suitable formotor. ON/OFF indication lamps, Auto manual switch and ON/OFF push button.One (1) - Set of Auxilliary relay for automatic operation through pressure switch.(FIRE PUMP PANEL)
163	Supply & fixing of 63 A Cubical Panelmade out from 20 Gauge thick C.R.Sheet duly painted /power coated having 63 amp 4 pole MCCB as incomer-01 No.,40A 4P MCB-1 no. 40 amp contactor,timer, indication lamps and bus bar arrangement system .(For High Mast Light)
164	S/F of special earthing complete with 3mtr long 40 m dia G.I pipe , 600x600x3.15mm thick copper plate , charcoal , salt including excavation of earth and filling of loose soil upto ground level including all connection and masonary work.
165	Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having locking arrangement and watering pipe etc.with charcoal & salt as required.
166	Supplying and laying 25 mm x 6 mm CU earth strip ISI marked on surface or in recess for connection etc as required.
167	S/F. of 48\"AC Ceiling fans complete of Usha/Crompton/Havells/Equi. make
168	Ground Floor
169	First Floor
170	Existing Building
171	Supplying and fixing two module steeped type electronic fan regulator with proper modular plate switch box including connections etc. as required.(Make: Legrand/L&T/ Anchor/ Usha/ Bajaj/Eq.)
172	Ground Floor
173	First Floor
174	Existing Building
175	S/F. of 300mm Exhaust fan of Usha/Crompton/Havells/Equi. make including cutting of wall with cement work.
176	Ground Floor
177	First Floor
178	Existing Building
179	S/F. of Superior type Call bell ISI marked suitable for DC / AC single phase 230 volts complete as required.
180	First Floor
181	S/F. of 1x24Wt. LED Tube light fittings of Havells/Wipro/Philips/Crompton/Panasonic/Eq. make.
182	Ground Floor
183	First Floor
184	Existing Building
185	S/F. of Sleek surface 8Wt. square LED Downlightof Bajaj/Havels /Crompton/Philips/Panasonic/Eq. make.
186	Ground Floor
187	First Floor
188	Existing Building
189	Supply and fixing of 18 watt LED round / square ceiling panel light fitting(make:Havells/wipro/Crompton/Panasonic/Eq.)
190	Ground Floor
191	First Floor
192	Existing Building
193	S/F of 20 watt LED gate light. Make (Havells / Crompton /Wipro / Panasonic/Eq.)
194	S/F. of 1x90Wt. LED Street light fittings complete with G.I. bracket including all connections as required.(make: Wipro/Crompton/Panasonic/Eq .)
195	S/F. of 1x45Wt. LED Street light fittings complete with G.I. bracket including all connections as required.(make: Wipro/Crompton/Panasonic/Eq .)
196	Supply , Installation, Testing, Commissioning of 1.5 Ton / 2.0 Ton split type inverter AC machines(3 Star rated) ofBluestar, Voltas, Carrier,LG,Toshiba,Hitachi or Equi. Make.
197	a)2.0 Ton AC machine
198	b)1.5 Ton AC machine
199	S/F ofcopper cooling pipe with insulation packing and flexible copper cable.
200	S/F ofNylon Netted Drain pipe with C clamp.
201	S/F ofPowder coated wall stand with Anchore fastener ( forAC Machines)
202	S/F of5 KVA Voltage stabilizer 130-300V (make: V-Guard/Microtech/Eq.)
203	S/F of 50 sq.mm 3 & 1/2 core PVC/XLPE Aluminium Armoured Cable of ISI marked. (Make -Polycab/Havells/KEI/RR Kabel/Eq.)
204	S/F of 16 sq.mm 4 core PVC /XLPE Aluminium Armoured Cable of ISI marked. (Make -Polycab/Havells/KEI/RR Kabel/Eq.)
205	S/F of 4 sq.mm 4 core Copper unarmoured cable of ISI marked.(Make -Polycab/Havells/KEI/RR Kabel/Eq.)
206	S/F of 2.5 sq.mm 3 core Copper unarmoured cable of ISI marked.(Make -Polycab/Havells/KEI/RR Kabel/Eq.)
207	Layingand fixing of one number of PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 25sq.mm but not exceeding 120 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required.
208	Layingand fixing of one number of PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size not exceeding 25sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required.
209	Layingand fixing of one number of PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding25 sq.mm but not exceeding 120 sq.mm on surface as required.
210	Layingand fixing of one number of PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of sizenot exceeding 25 sq.mm on surface as required.
211	Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required.
212	a)3.5C x 50 sq.mm
213	b)4C x 16 sq.mm
214	S/F of 2.3 KVA Sine wave Inverter(Microtek/Luminous/V-Guard/Eq.) make.
215	S/F of Tall Tubular Battery VT 200 High Cyclic Life of capacity 200 AH @C20 inverter battery of Microtek/Luminous/Exide/V-Guard make.
216	Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Generation system conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:- a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. c) Data Monitoring System complete with accessories. d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required.
217	Supply, Installation , testing and commissioning of of 16 mtr long 20 sided polygonal hot dip galvanizedraising lowering high mast in 2 section manufactured from HT steel as per S 355 grade as per BS-EN10 025 having bottom dia of 360 mm (minimum) and top dia of 150 mm (minimum) of sheet thickness of minimum 3mm/ 3 mmrespectively with base plate with8 nos. M30 x 850 mm long foundation bolts with all accessories like Double drum Winch,AISI 316 grade Stainless steel minimum 6 mm dia 2 wire rope, EPR trailing cableLightening arrester, aviation obstruction lightLantern carriage, Feeder pillar,desired accessories complete as per approved design. The lantern carriage of high mast should have necessary arrangement to install 6nos. Aesthetically designed 200W LED Flood Light (Make- Panasonic/Bajaj/Phillips/Wipro/eq) will give minimum system efficacy >100lm/W. The luminaire shall have a rated system life of 50,000BH @ L70 ( at Ta 25 degree C). The luminare should have beam angle of 60 Deg with a color temperature of 5700K and CRI>70. The luminaire housing is made of non corrosive high pressure die-cast aluminum material with black powder coated finish having Al heat sink and heat resistant toughened glass offering silicon gasket having IP 66 and IK07 rating over long period. LEDs are covered with UV resistant PC lens that offers uniform symmetric light distribution maintaining 60 degree beam angle and LED are derived < 70% of actual current , so better life and less depreciation of lumens over long period of time. Each LED comes with photo biological reports and sulfur resistant certificate. Energy efficient constant current Integral vibration proof potted LED driver has THD = 10%, P.F = 0.95 and driver efficiency > 85% having Class 1 electrical insulation with short circuit , overload & Over Voltage protection in Driver,Test Reports:\"LM80 : LM79 reports from valid NABL accredited Labs .\"; LM80 of all LEDs are tested > 9000 burning hours and LED life > 50000 hrs , this is supported by TM21 reports . BIS approval for both the luminaire & the driver. LED chip Make: Osram/NICHI/CREE and LED chip efficacy > 135 lm/W. The luminaire has the features of Input Voltage : AC220-240V, 50/60Hz,Voltage operating range : 140-270V with High Surge Protection : 4KV (Internal) and 10KV (Externl) , Operating temperature : -10° C TO 50° C .The hot dip galvanization of high mast shaft shall bemanufactured as per S 355 grade as per BS-EN10 025from HTThe high mast structure should be designed to withstand wind speed of180 KM/HR(minimum) wind speed by considering the weight , thickness and wind expose area of 6 nosof floodlightsThe maker of high mast shaft shall be Bajaj/ BPP/Utkal Galvanizer/Utkarsh/RR Ispat/ Skipper . tollfree baseservice centers to provide immediate after sales service for solar lights within the 5years warranty period. The scope of work includes construction of Suitable RCC foundation as per approved design with M 20 grade RCC as per the approved foundation drawing, fixing of foundation bolts, erection of high masts and fixing of 6 nos. 200 W AIO Flood lights with 3 C x 1 sq mm copper flexible wire, with supply & installation of feeder pillar outdoor stand mounted outdoor type feeder pillar 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, including cable laying from source to panel withcable laying from Panel to high mast with 4 C x 16 sq mm aluminiumarmoured cable , 2 nos.40 mm dia. GI pipe and interconnection with 50/6 mm GI flat all other accessories including salt and charcoal, chamber & its cover. All the drawing structural calculation/TDS approval to be obtained prior to manufacture and before the start of foundation work. The cost is including civil foundation and necessary accessories.
218	Supply,installation,testing & commissioning of Indoor Dome IR NetworkCamera(1/3\" CMOS sensor,mini,pixel of 2048*1536 or higher video quality,frame rate of 20 fps @4MP,H.264,H.264_High profile&MJPEg video compression,3.6mm fixed lens,physical ICR filter of both day and night,30 mtr IR Distance,Digital WDR range,3D-DNR for noise reduction,IPv4/IPv6 network supported ,IP67 rated for weather proofing,ONVIF version 2.2 or higher,POE IEEE 802.af,UL,FCC,CE,ISO certified).Make W BOX/Pelco/Honeywell/Eq
219	Supply,installation,testing & commissioning of outdoor bulletIR Network Camera(1/3\" CMOS sensor,mini,pixel of 2048*1536 or higher video quality,frame rate of 20 fps @4MP,H.264,H.264_High profile&MJPEg video compression,3.6mm fixed lens,physical ICR filter of both day and night,30 mtr IR Distance,Digital WDR range,3D-DNR for noise reduction,IPv4/IPv6 network supported ,IP67 rated for weather proofing,ONVIF version 2.2 or higher,POE IEEE 802.af,UL,FCC,CE,ISO certified).Make W BOX/Pelco/Honeywell/Eq.
220	Suply of 16 Channel Network Video Recorder added with 16 TB Harddisk Storage.Make:Honeywell/Axis/Pelco/Eq.
221	Supply & Installation of 32\"\" Full HD Display along with Mountig Accessories , Make:LG/Samsung/Panasonic/Eq.
222	Supply & Installation of 24 port IEEE 802.af and at POE 10/100/1000 Mbps managed switch with minimum two combo ports with minimum POE Power budget of 375W per switch .( make :Cisco/D-Link/Secureve/Honeywell/Eq.)
223	Supply and fixing ofCat 6 24 port loaded patch panel.(Make:Legrand/Digisol/Tyco/Eq.)
224	Supply and Installation of 9U/500 Wall mount rack with Fan,PDU,Cable Manager and H/W Pkt.(Make:Legrand/Valrack/Retail/Eq.)
225	Supply of 4-pair CAT 6 UTP Cable for camera connectivity in existing conduit Cable.Make:Molex/Legrand/Finolex/D-Link/Secureve/Eq.
226	Supplying and fixing ofclip in type modular Telephone socket ISI markedmounted on G.I modular box with face plate & cover of suitable size ,including all accesories and connection as per direction of Engineer in Charge.
227	Supplying and fixingof clip in type modular T.V. antenna socket ISI marked onmounted on G.I modular box with face plate & cover of suitable size , including all accesories and connection as per direction of Engineer in Charge.
228	Supplying and drawing 4 pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessedPVC conduit as required.
229	Recessed wiring to television point withcable RG-6 grade, 0.7 mm solid copper conductor PE insulated shielded with fine tined copper braid and protected with FR PVC sheath in in existing surface / recessedPVC conduit as required as per direction of Engineer in Charge.
230	Supplying and fixing of following sizes PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required. 20mm
231	Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deepon surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.( Telephone junction Box)
232	Supplying & Commissioning of Telephone Hand Set.
233	Supplying & installationof 10 pair KRONE make moudles with locking & key arrangements fabricated with MS sheet & powder coated to be fixed on concealed manner incl. good the damages.
234	Supply & fixing of Spike type lightning arrester of size 2.6\" length made of 0.5\"diameter copper rod, over which 5nos 5\" length pointed copper rods of 0.3\" diameter with suitable size of nuts and bolts.
235	Centrifugal type Boosting Fire pumpof capacity 900 LPM @ 35 M.(20 HP) head with Class-A Insulation, 50 Hz.,415 V Three Phase Induction Motor , 2880 RPM, complete with all associated accessories.(Kirloskar/WILO/Equivalent)
236	Supply & fixing of 5000 ltr Fibre Water Tank 4 nos triple layer unbreakable extra thick and flexible material for long life new UV threaded lid to keep dust particles out with all needed accessories, with structural steel like (Beam, Channel, Angle, Sheet & Plate) for base of all tank.(Make:-Mukta/Eqiuvalent)
237	SS Hydrant Valve / Landing valve, of 63 mm NB size, type-A, single headed , oblique tyep, as per IS :5290/93.(Fireshield/KK FIRE/Equivalent)
238	SS short branch pipe with 63 mm male inlet and 19 mm outlet nozzle, as per IS:903 (Fireshield/KK FIRE/Equivalent)
239	ISI marked RRL Fire Hose fitted with SS male & female coupling completeby GI wire binding, size: 63 mm NB and 15 meter long each.(Fireshield/KK FIRE/Equivalent)
240	MS Hose Box single door for RRL Hose of suitable size to accommodate 1no. of 30 mtrlong fire hose and a branch pipe, wall mounted type.(Fireshield/KK FIRE/Equivalent)
241	Swinging pattern wall fixing first aid hose reel made from MS sheet and waterways and moving parts with rubber hose of 19 mm dia. and 30 mtrs. long with self closing shut-off nozzle. (Fireshield/KK FIRE/Equivalent)
242	C.I. Butterfly valve as per IS:5321 with matching flange .(Kartar/Equivalent) 100mm NB
243	C. I. Check valve as per IS:5321 with matching flange .(Kartar/Equivalent)
244	(a)100mm NB
245	(b)25mm NB Ball valve with all accessories.(SKM Plus/Equivalent)
246	2 - way fire brigade connection. (Fireshield/KK FIRE/Equivalent)
247	Heavygrade, Class \"C\" MS Pipe as per IS: 1239 with all fittings and accessories.(Jindal/Tata)
248	(a)100 mm NB
249	(b)25 mm NB
250	Pressure Gauge (H Guru/Equivalent)
251	Pressure Switch (Indfoss/Danfoss/Equivalent)
252	Automatic Air Release Valve.
253	Structural Steels as required for making of supports etc. to make the system complete.
254	ADDRESSABLE FIRE ALARM SYSTEM-: SITC of Microprocessor based Addressable 2 Loop main Fire Alarm Control Panel with Battery. (Honeywell Morley IAS/Equivalent)
255	Supply,Installation,Testing,Commissioning ofAddressable Smoke Detectorcomplete with base. (Honeywell Morley IAS/Equivalent)
256	Supply,Installation,Testing,Commissioning ofAddressable Hootercomplete with base. (Honeywell Morley IAS/Equivalent)
257	Supply,Installation,Testing,Commissioning of Addressable Manual Call Point with Base. (Honeywell Morley IAS/Equivalent)
258	Supply,Installation,Testing,Commissioning of PVC insulated PVC sheathed fire alarm cable 2 x 1.5sqmmincluiding all accessories. (Polycab/Havells/KEI/RR KABEL/Equivalent)
259	FIRE EXTINGUISHERS -: Supply, installation, testing and commissioning ISI marked (IS:2878) Fire Extinguisher, Carbon-di-oxide(CO2) type capacity 4.5 Kg. Flat base including valve, discharge hose of not less than 10 mm dia, 1M long and complete in all respects including initial fill with CO2 gas conforming to IS:307-1966 and walll suspension braket as required as per specifications.(Eversafe/Equivalent))
260	Supply, installation, testing and commissioning ABC (Powder Type) 6 Kg.Capacity Fire Extinguisher. Mild Steel Cylinders ISI marked TAC approved fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged with ABC powder (Mono Ammonium Phosphate) pressured by Nitrogen complete in all respects including wall suspension bracket and conforming to IS:1349-1993 as required as per specifications.(Eversafe/Equivalent)
261	Supply and installation of Rubber Mats 12mm thick of size 2000mm x 1000mm x 12 mm thick Electrical tested with test certificate.
262	Supply and fixing of shock treatement charts duly laminated along with separate colour single line diagram laminated, to be fixed in Electrical control panel room.
263	PH Works
264	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC pipes conforming to ASTM-D-1785/89 of the following nominal bore, tube fittings and clamps including making the wall good. ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.(Oriplast/Supreme/Finolex)
265	20mm dia PVC ASTM pipe (sch-80)
266	Ground floor
267	First Floor
268	25mm dia PVC ASTM pipe (sch-80)
269	Ground floor (Water Supply)
270	First Floor
271	32mm dia PVC ASTM pipe (sch-80)
272	Ground floor
273	First Floor
274	40mm dia PVC ASTM pipe (sch-80)
275	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge
276	20mm dia C - PVC pipe
277	Ground floor
278	First Floor
279	Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge.
280	15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
281	15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)
282	15mm dia CPBib cock (Con-CHR-047KN Jaquar make)
283	15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)
284	15 mm dia CP Bib cock Elbow Action (Plaza Make)
285	20mm dia CP concealed stop cock(Plaza Make)
286	25mm dia brassfull way valve (Shakti make)
287	32mm dia brassfull way valve (Shakti make)
288	40mm dia brassfull way valve (Shakti make)
289	15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)
290	15mm CP Extension piece
291	125mm CP grating
292	15mm size C.P. flange
293	Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge
294	2000 liters capacityPVC water storage tank top of 1st floor
295	supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge.
296	Ground floor
297	First Floor
298	Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proofas per P.H. specification and direction of Engineer-in-charge
299	Ground floor
300	First Floor
301	Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
302	Ground floor
303	First Floor
304	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge.
305	110mm U-PVC SWR Pipe (Supreme/Ashirvad)
306	110mm U-PVC‘P’ Trap(Ori Plast/Finolex/Supreme Make)
307	110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
308	110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
309	110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
310	100mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
311	110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)
312	110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make)
313	110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
314	Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI \"p\" or \"s\" trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
315	580mm size Orissa pan (Hindware/Parryware/Neycer make)
316	Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge.One piece commod(Hindware)ELEMENT Cat No.92084.
317	European water closet with \"p\" trap plain(Hindware/Parryware/Neycer make)
318	Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
319	10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
320	Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
321	Under Counterbasin(560x450)Hindware-No.10095
322	550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Jaquar make) with PEDESTRAL
323	Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
324	25mm x 600mm long CP towel rail(Jaquar)ACN-ACR-1111N
325	CP towel Ring(Jaquar)ACN-ACR-1121N
326	Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.
327	600 x 125mm plate glass shelf with CP guard rails
328	Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
329	600mmx450mm size B.E mirror (swivelled type)
330	Design Large Mirror.42 .00mt x 0.90mt =
331	Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
332	CP soap holder (Jaquar)ACN-ACR-1131N
333	Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.
334	15mm CP revolving shower (Jaquar)CON-CHR-209KN
335	Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge stall urinal
336	Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge
337	Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
338	Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
339	Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site.
340	Ground floor
341	Supplying the waterproofing material Pidifin 2K of Dr.fixit or equivalent water proofing material and appling in two coat over the concrete floor and dado upto 1’6\" in wall including cleaning,applying and mending as per specification including all labour charges as per direction of Engineer-in-charge.
342	First Floor(Qnty same as Floor tiles in F.F)
343	Supplying all materials labor T&P and fitting & fixing 10mm thick Granite partition wall or screen wallincluding cutting grooves and mending good the damages with cement concrete (1:2:4) using 12mm size hard granite chipsincludingwatering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complate as per specification and direction of the Engineer in charge
344	Granite For Urinal Partion
345	Granite for W.H.B.
346	Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finishstructural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material,The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre\"s standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
347	Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigmentscomplete in all respect as per specification and direction of the Engineer in charge
348	Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 120 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 120 liter\"s along with 3 noa of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge
349	Aqua guard pure Chill 120 PSS UV
350	Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture\"s specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge
351	110mm dia P.V.C. pipe
352	160mm dia P.V.C. pipe
353	Supplying all materials ,labour ,T&P and constructing Inspection Chamber ofinside size 760mmx760mmx460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-charge
354	Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
355	Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification.
356	MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover )
357	Supplying all materials ,labour ,T&P and constructing gully trap chamber ofinside size 250mmx250mmwith 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinthand inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI gratingetc.all complete as per drawing,specification and direction of Engineer-in-charge
358	Construction of 2 nos production well including scientific source finding through consolidated and unconsolidated rock with down the ODEX drilling rig with PVC, GI, MS pipe and installation of submersible pump set with all accessories.
359	Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with combination drilling rig as required to suit the site condition as per the direction of Engineer-in-charge including supply of own rig with its accessories, tools and plant and consumables etc. for lowering of 200mm /150mm dia M.S. Pipe / PVC casing fitted with socket and with or without well screen as per the necessity for sub-medium hard and boulder formation (M.S./PVC casing pipe if required to prevent collapse of over burden is to be provided by contractor including lowering and withdrawing after completion of the tube well) 200mm dia x 400mm dia in over burden position inlcluding packing of gravel supplied by Contractor for 400mm bore only etc as per direction of Engineer incharge.
360	Drilling for 200mm dia bore
361	00mtr to 20 mtr
362	21mtr to 40 mtr
363	Drilling for 150mm dia bore
364	41mtr to above
365	Lowering the following size of G.I. / PVC / M.S. housing pipe with or without slotted pipe as per the necessity for ground level upto 45 mtr depth and fitted and fixed up perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plants etc all complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
366	Lowering 200mm dia M.S.ERW pipe casing pipe
367	00mtr to 40 mtr
368	cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge in obtained from the tube well including supply and use of all necessary equipment and labour as per direction of Engineer-in-charge.
369	By DTH / Rotary
370	Supplying all labour, materials and T&P for providing sanitary sealing by cement concrete grouting of annular space around M.S. casing pipe uptp 5 mtr below groun dlevel to plug the bore hole excluding cost of cement etc all complete as per direction of EIC.
371	Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make)
372	2 H.P. Single phase/ three phase 7 stagehead renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm
373	DOL Control panel
374	40mm dia steel short piece
375	Well cap
376	50mm size CI bracket
377	2.50sqmm flat cable
378	20mm dia rigid UPVC pipes
379	Steel rope with cover
380	Labour charges for lowering including transportation
381	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceilingand floor all complete as per specification and direction of the Engineer in charge
382	32mm HDPE pipes (Finolex/Supreme make)

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Upgradation Of Model Bus Terminal At Malkangiri In The District Of Malkangiri, Malkangiri-Odisha

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Upgradation Of Model Bus Terminal At Malkangiri In The District Of Malkangiri, Malkangiri-Odisha

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us